手性联萘酚锂盐催化下三甲基硅氰与芳香醛的对映选择加成反应研究

光学活性芳香氰醇及其衍生物是合成一些具有重要生理活民生天然产物的关键中间体。氰基醇的对映选择合成主要是利用由光学活性手性配体与甲价钛形成的配合物为手性催化剂,催化醛与氢氰酸或三甲基硅氰（TMSCN）的加成,由于手性联萘酚（BINOL）在很多反应中表现出优异的立体选择催化活性,故试图用其催化醛与氢氰酸或TMSCN的加成,但对映选择性不理想,我们用BINOL与正丁基锂作用生成的盐催化芳香醛与TMSCN的对映选择加成,取得了较好的结果。     

A new approach to the diastereoselective synthesis of aldols:Introduction of the 6α-(1R-hydroxyethyl) side chain of the carbapenem and penem antibiotics

The 6 α-(1R-hydroxyethyl) side chain has been introduced via a stereocontrolled aldol reaction with a silyl ketone as a hindered acetaldehyde equivalent. The derived trans-S silyl carbinol undergoes a completely stereospecific rearrangement to the desired trans-R O-silyl ether. The two-step sequence may be done in one-pot in overall yields of 70–90%.     

Lewis base activation of Lewis acids. Vinylogous aldol addition reactions of conjugated N,O-silyl ketene acetals to aldehydes

N,O-Silyl dienyl ketene acetals derived from unsaturated morpholine amides have been developed as highly useful reagents for vinylogous aldol addition reactions. In the presence of SiCl4 and the catalytic action of chiral phosphoramide (R,R)-3, N,O-silyl dienyl ketene acetal 8 undergoes high-yielding and highly site-selective addition to a wide variety of aldehydes with excellent enantioselectivity. Of particular note is the high yields and selectivities obtained from aliphatic aldehydes. Low catalyst loadings (2-5 mol %) can be employed. The morpholine amide serves as a useful precursor for further synthetic manipulation.     

Quantum chemical study on enantioselective reduction of keto oxime ether with borane catalyzed by oxazaborolidine. Part 1. Structures of catalyst–borane–keto oxime ether adducts

In the present work, quantum chemical computations of the enantioselective reduction of keto oxime ether with borane catalyzed by chiral oxazaborolidine are performed by means of the Hartree–Fock and the density functional methods. The structures of oxazaborolidine, oxazaborolidine–borane adduct, and oxazaborolidine–borane–keto oxime ether adducts are optimized completely at the HF/6‐31g* and B3LYP/6‐31g* levels and their properties studied in detail. The oxazaborolidine catalyst is a twisted chair structure and reacts with borane at the nitrogen site of the catalyst to form the catalyst–borane adduct whose formation reaction is exothermic. The catalyst–borane adduct reacts easily with keto oxime ether to form catalyst–borane–keto oxime ether adducts that have eight stable structures. The coordination of the carbonyl oxygen in keto oxime ether at the boron site of the catalyst is of more advantage to the enantioselective reduction of keto oxime ether than the coordination of the oxime nitrogen in the keto oxime ether at the boron site is. © 2001 John Wiley & Sons, Inc. Int J Quant Chem 81: 291–304, 2001     

Two Reaction Mechanisms via Iminium Ion Intermediates: The Different Reactivities of Diphenylprolinol Silyl Ether and Trifluoromethyl‐Substituted Diarylprolinol Silyl Ether

The reactions of α,β‐unsaturated aldehydes with cyclopentadiene in the presence of diarylprolinol silyl ethers as catalyst proceed via iminium cations as intermediates, and can be divided into two types; one involving a Michael‐type reaction (type A) and one involving a cycloaddition (type B). Diphenylprolinol silyl ethers and trifluoromethyl‐substituted diarylprolinol silyl ethers, which are widely used proline‐type organocatalysts, have been investigated in this study. As the LUMO of the iminium ion derived from trifluoromethyl‐substituted diarylprolinol silyl ether is lower in energy than that derived from diphenylprolinol silyl ether, as supported by ab initio calculations, the trifluoromethyl‐substituted catalyst is more reactive in a type B reaction. The iminium ion from an α,β‐unsaturated aldehyde is generated more quickly with diphenylprolinol silyl ether than with the trifluoromethyl‐substituted diarylprolinol silyl ether. When the generation of the iminium ion is the rate‐determining step, the diphenylprolinol silyl ether catalyst is the more reactive. Because acid accelerates the generation of iminium ions and reduces the generation of anionic nucleophiles in the Michael‐type reaction (type A), it is necessary to select the appropriate acid for specific reactions. In general, diphenylprolinol silyl ether is a superior catalyst for type A reactions, whereas the trifluoromethyl‐substituted diarylprolinol silyl ether catalyst is preferred for type B reactions.     

Oxazaborolidinone-promoted vinylogous Mukaiyama aldol reactions

delta-Hydroxy-alpha,beta-unsaturated carbonyl compounds were prepared in one step via the vinylogous Mukaiyama aldol reactions with O,O-silyl ketene acetals. Isopropyl alcohol as additive and tryptophane-based B-phenyloxazaborolidinone were required for obtaining the gamma-alkylated product in high enantioselectivities.     

Hydrosilylation of allyl glycidyl ether with triethoxysilane

Hydrosilylation of allyl glycidyl ether with triethoxysilane in presence of Speier’s catalyst leads to triethoxy(3-glycidoxypropyl)silane and triethoxy(2-glycidoxy-1-methylethyl)silane and is accompanied by isomerization of allyl glycidyl ether and cleavage of the oxirane ring and the ether bond. An effect of admixtures in allyl glycidyl ether on the process is revealed. Some other hydrosilylation catalysts and additives to Speier’s catalyst are studied     

A versatile protocol for Stille-Migita cross coupling reactions

The combination of catalytic amounts of [Pd(PPh3)4], copper thiophene-2-carboxylate (CuTC) and [Ph2PO2][NBu4] allowed a series of exigent Stille-Migita reactions to be performed with high yields; as the protocol is fluoride free, a variety of O-silyl and C-silyl groups remained intact.     

A new way to synthesize benzoin isopropyl ether on Cu-Fe-hydrotalcite

An efficient synthesis of benzoin isopropyl ether with benzaldehyde and propanol in the presence of heterogeneous recyclable Cu-Fe-hydrotalcite catalyst has been explored. Cu-Fe-hydrotalcite was firstly successfully synthesized over Jahn-Teller effect of Cu2+. The catalytic test result showed that Cu-Fe-hydrotalcite could be used as a good catalyst in the synthesis of benzoin isopropyl ether. The highest conversion of benzaldehyde was 59.7% and the selectivity of benzoin isopropyl ether was nearly 100%. By ...     

Beiträge zur Chemie der Kohlensäurederivate, 3. Mitt.: Neue Synthesen von Tris(trimethylsilyl) cyanurat,N-Chlorsulfinylimid und Chlorcyan

Tris(trimethylsilyl)cyanurate (I) has been prepared in high yields by silylation of cyanuric acid with trimethylsilyl cyanide, as well as by the reaction of trichloroisocyanuric acid with trimethylsilyl cyanide or trimethylsilylsulfinylimide. The latter reactions, yielding Cl–CN and Cl–NSO resp. as the only by-products, are convenient methods for synthesizing these pseudohalogen-chloride compounds in a very pure state. Starting fromN-chlorocarbonyl isocyanateI is formed in high yields by a complex reaction with trimethylsilylsulfinylimide too. Based on IR, Raman and¹H-NMR data the O-silyl structure ofI was confirmed. The formation of products with N-silyl or N,O-silyl structure was never observed.

---

---

2. Mitt.:E. Nachbaur, Mh. Chem.97, 361 (1966).     

[CuO-ZnO-Al2O3]/[HZSM-5]核壳双功能催化剂的制备、结构及其CO2+H2直接合成二甲醚反应性能

利用水热合成法制备了一系列不同晶化时间的核壳结构双功能催化剂[CuO-ZnO-Al₂O₃]/[HZSM-5],通过X射线衍射(XRD)、扫描电镜(SEM)和能量分散谱(EDS)对催化剂结构进行了表征,并考察了核壳催化剂CO₂加氢直接合成二甲醚的反应性能。结果表明,通过水热合成法可在甲醇合成催化剂CuO-ZnO-Al₂O₃表面包覆一层完整的HZSM-5分子筛膜,形成核壳结构,并且调节晶化时间可以控制分子筛晶粒尺寸及膜厚。与物理混合法制备的传统双功能催化剂相比,核壳结构催化剂合成二甲醚的选择性显著提高,其中晶化时间为3d的催化剂反应性能最为理想,CO₂转化率为38.9%,二甲醚选择性达到77.0%。     

Determination of metoprolol enantiomers in human urine by GC-MS using (−)-α-methoxy-α-(trifluoromethyl)phenylacetyl chloride as a chiral derivatizing agent

Summary A method for the assay of R-(+)- and S-(−)- metoprolol in human urine has been developed using gas chromatography-mass spectrometry. The method involved purification by liquid-liquid extraction and derivatization with N-methyl-N-(trimethylsilyl)trifluoroacetamide to form an O-silyl ether, followed by subsequent chiral derivatization with (−)-α-methoxy-α-(trifluoromethyl)phenylacetyl chloride to form diastereomeric amide. The reaction was rapid and the diastereomeric derivatives were well resolved. Quantitation was performed by selected-ion monitoring of fragment ions of the diastereomers in electron impact ionization mode. No racemization was found during the reaction. The detection limit was 0.5 ng·mL⁻¹. The intra-day variation ranged between 0.38 and 7.86% in relation to the measured concentration and inter-day variation was 2.26–8.06%. The method has been applied to the determination of R-(+)-and S-(−)- metoprolol in human urine from healthy volunteers dosed with racemic metoprolol tartrate.     

Regioselective synthesis of alpha-methyl 2-methyleneglutarate via a novel lactonization-elimination rearrangement

[reaction: see text] A facile route to the alpha-methyl ester of 2-methyleneglutarate via a three-step sequence from 3-hydroxymethylcyclopentene is described. Regioselective formation of the monoacid from a diester precursor proceeds via a novel fluoride-mediated, tandem deprotection/rearrangement of O-silyl 2-(hydroxymethyl)dimethylglutarate.     

锌/钴双金属氰化物络合物催化剂(DMC)催化环氧丙烷聚合反应的活性结构研究

双金属氰化物络合物 (DMC)是一类环氧化物聚合反应的高效催化剂 [1] ,已将其成功地用于高分子量低不饱和度聚醚多元醇的工业化生产 [2 ] .合适的有机配体是制备高活性 DMC催化剂的关键因素 .高活性 DMC催化剂是在有机配体存在下 ,由 Zn Cl2 与 K3[Co(CN) 6]在水中反应制得的 ,可表示为Zn3[Co(CN) 6]2 · x Zn Cl2 · y H2 O· z L,L 是有机配体 ,主要为醇类和醚类物质 [3～ 5] .Schuchardt[2 ]和Robert[3]等曾对 DMC催化环氧丙烷的聚合机理进行过研究 ,但有关催化活性中心的结构及环氧化物与催化剂的作用方式尚未见报道 .本文以…     

Mechanism and Origin of Stereoselectivity in Chiral Phosphoric Acid-Catalyzed Aldol-Type Reactions of Azlactones with Vinyl Ethers

The precise mechanism of the chiral phosphoric acid-catalyzed aldol-type reaction of azlactones with vinyl ethers was investigated. DFT calculations suggested that the reaction proceeds through a Conia-ene-type transition state consisting of the vinyl ether and the enol tautomer of the azlactone, in which the catalyst protonates the nitrogen atom of the azlactone to promote enol tautomerization. In addition, the phosphoryl oxygen of the catalyst interacts with the vinyl proton of the vinyl ether. The favorable transition structure features dicoordinating hydrogen bonds. However, these hydrogen bonds are not involved in the bond recombination sequence and hence the catalyst functions as a template for binding substrates. From the results of theoretical studies and experimental supports, the high enantioselectivity is induced by the steric repulsion between the azlactone substituent and the binaphthyl backbone of the catalyst under the catalyst template effect.     

Stereospecific polymerization of isobutyl vinyl ether catalyzed by calcined iron sulfate

The polymerization of isobutyl vinyl ether was studied in a heterogeneous system using iron (II) sulfate calcined in air at various temperatures as a catalyst. The maximum activity was shown by the catalyst calcined at 700°C, which effected the polymerization at room temperature in a few seconds, while the sulfate treated at 750°C was totally inactive. Poly(vinyl ethyl ether) was also obtained by the FeSO₄ (700°C) catalyst at room temperature. This catalyst formed the crystalline polymer (melting temperature 135–138°C) when the reaction was performed in toluene as solvent at room temperature. Poisoning experiments with Hammett indicators were carried out with the FeSO₄ (700°C) catalyst. The treatment with n-butylamine rendered it inactive in the reaction of isobutyl vinyl ether, while its catalytic activity was little affected by dicinnamalacetone. On the basis of the observed results, the nature of active sites of catalyst is discussed.     

Polymerization of lactam ethers

Preparation and polymerization of lactam ethers which contain an amide and an ether group in the same ring are described. Seven-membered lactam ethers give relatively low molecular weight polymers with an anionic or cationic catalyst, while with diethylzinc as catalyst, the 2,7-dimethyl lactam ether of a seven-membered ring gives a crystalline polymer having a melting point of 220°C. A polymerization mechanism is discussed.     

Synthesis and photochemical reaction of novel p-alkylcalix[n]arene derivatives containing cationically polymerizable groups

New photoreactive p-methylcalix[6]arene (MCA) derivatives containing cationically polymerizable groups such as propargyl ether (calixarene 1), allyl ether (calixarene 2), and ethoxy vinyl ether (calixarene 3) groups were synthesized with 80, 74, and 84% yields by the substitution reaction of MCA with propargyl bromide, allyl bromide, and 2-chloroethyl vinyl ether (CEVE), respectively, in the presence of either potassium hydroxide or sodium hydride by using tetrabutylammonium bromide (TBAB) as a phase transfer catalyst (PTC). The p-tert-butylcalix[8]arene (BCA) derivative containing ethoxy vinyl ether groups (calixarene 4) was also synthesized in 83% yield by the substitution reaction of BCA with CEVE by using sodium hydride as a base and TBAB as a PTC. The MCA derivative containing 1-propenyl ether groups (calixarene 5) was synthesized in 80% yield by the isomerization of calixarene 2, which contained allyl ether groups, by using potassium tert-buthoxide as a catalyst. The photochemical reactions of carixarene 1, 3, 4, 5, and 6 were examined with certain photoacid generators in the film state. In this reaction system, calixarene 3 containing ethoxy vinyl ether groups showed the highest photochemical reactivity when bis-[4-(diphenylsulfonio)phenyl]sulfide bis(hexafluorophosphate) (DPSP) was used as the catalyst. On the other hand, calixarene 1 containing propargyl ether groups had the highest photochemical reactivity when 4-morpholino-2,5-dibuthoxybenzenediazonium hexafluorophosphate (MDBZ) was used as the catalyst. It was also found that the prepared carixarene derivatives containing cationically polymerizable groups such as propargyl, allyl, vinyl, and also 1-propenyl ethers have good thermal stability. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1805–1814, 1999     

Dry Reforming of Dimethyl Ether with Carbon Dioxide over a Cu-Containing Hybrid Catalyst

Reforming of dimethyl ether with carbon dioxide into synthesis gas has been carried out over a mixed catalyst containing Cu-based methanol decomposition catalyst and alumina. The catalyst is found to show a high activity and selectivity. Catalyst stability and deactivation mechanism was also examined.     

Tandem base-promoted ring opening/brook rearrangement/allylic alkylation of O-silyl cyanohydrins of beta-silyl-alpha,beta-epoxyaldehydes

[reaction: see text]. Metalated O-silyl cyanohydrins of beta-silyl-alpha,beta-epoxyaldehyde have been found to serve as functionalized homoenolate equivalents by a tandem sequence involving a base-promoted ring opening of the epoxide, Brook rearrangement, and alkylation of the resulting allylic anion.