A confirmatory method for the simultaneous extraction,separation, identification and quantification of Tetracycline,Sulphonamide, Trimethoprim and Dapsone residues in muscle by ultra-high-performance liquid chromatography–tandem mass spectrometry according to Commission Decision 2002/657/EC

A rapid confirmatory multi-residue method for the analysis of tetracyclines, sulphonamides, trimethoprim and dapsone by UPLC-MS/MS is described. The method is able to quantify and confirm the following 19 compounds, oxytetracycline, tetracycline, chlortetracycline, doxycycline, sulfadiazine, sulfathiazole, sulfapyridine, trimethoprim, sulfamerazine, sulfamethizole, sulfamethazine, sulfamethoxypyridazine, sulfamonomethoxine, sulfachlorpyridazine, dapsone, sulfamethoxazole, sulfisoxazole, sulfaquinoxaline and sulfadimethoxine. Samples are extracted with 0.1 M EDTA and acetonitrile, which is then evaporated under a stream of nitrogen and reconstituted in water. Following centrifugation and filtering, an aliquot is analysed by UPLC-MS/MS using positive electrospray ionisation and multiple reaction monitoring. The method is deemed rapid as all analytes are extracted by a single extraction technique, with no solid-phase extraction clean up required. Validation is according to Commission Decision 2002/657/EC and was carried out for bovine, porcine, ovine and poultry species. Specificity, recovery, repeatability, reproducibility, CCα and CCβ data is presented.     

Green synthesis of biogenic metal nanoparticles by terrestrial and aquatic phototrophic and heterotrophic eukaryotes and biocompatible agents

The size, shape and controlled dispersity of nanoparticles play a vital role in determining the physical, chemical, optical and electronic properties attributing its applications in environmental, biotechnological and biomedical fields. Various physical and chemical processes have been exploited in the synthesis of several inorganic metal nanoparticles by wet and dry approaches viz., ultraviolet irradiation, aerosol technologies, lithography, laser ablation, ultrasonic fields, and photochemical reduction techniques. However, these methodologies remain expensive and involve the use of hazardous chemicals. Therefore, there is a growing concern for the development of alternative environment friendly and sustainable methods. Increasing awareness towards green chemistry and biological processes has led to a necessity to develop simple, cost-effective and eco-friendly procedures. Phototrophic eukaryotes such as plants, algae, and diatoms and heterotrophic human cell lines and some biocompatible agents have been reported to synthesize greener nanoparticles like cobalt, copper, silver, gold, bimetallic alloys, silica, palladium, platinum, iridium, magnetite and quantum dots. Owing to the diversity and sustainability, the use of phototrophic and heterotrophic eukaryotes and biocompatible agents for the synthesis of nanomaterials is yet to be fully explored. This review describes the recent advancements in the green synthesis and applications of metal nanoparticles by plants, aquatic autotrophs, human cell lines, biocompatible agents and biomolecules.     

伊敏褐煤中微量元素的地球化学特征及其无机-有机亲和性分析

采用脱矿物质、提取腐殖酸等方法结合ICP-MS对伊敏15_上、16_下煤中的32种微量元素的含量及其赋存特征进行了分析。与地壳克拉克值及中国侏罗-白垩纪煤和世界褐煤中微量元素含量相比,伊敏褐煤中微量元素没有明显富集。脱矿物质处理后,Ni明显富集,As略比原煤高,其他微量元素都低于原煤。原煤提取腐殖酸和脱矿物煤提取腐殖酸中Ni、Mo、Cd、Sn、W明显富集,这表明Ni、Mo、Cd、Sn、W和腐殖酸形成了稳定的有机态化合物。原煤提取腐殖酸残煤和脱矿物煤提取腐殖酸残煤中V、Ni、As富集,表明V、Ni、As与煤的大分子结构形成了稳定的有机态化合物。根据微量元素和灰分的相关性系数,把微量元素分为以下几类:无机富集元素Cr、U;亲无机元素Cu、Cd、In、Sn、Ga、Y、Zr、Hf、Bi、Th;偏无机元素Be、Sc、Rb、Sr、Nb、Cs、Ta、Pb;偏有机元素V、As、Tl、Ba、Se;亲有机元素Li、Co、W;有机富集元素Ni、Zn、Mo、Sb。     

Simultaneous Determination of Cadmium,Mercury, Lead,Arsenic, Copper,and Zinc in Human Breast Milk by ICP‐MS/Microwave Digestion

Abstract

An analytical method using microwave digestion and inductively coupled argon plasma-mass spectrometry (ICP‐MS) analysis was developed for the measurement of Cd, Hg, Pb, As, Cu, and Zn in human breast milk. We applied external calibration, internal calibration, and standard addition for reference material and pooled milk analysis. Method performances were defined in terms of detection limits, accuracy, and precision. Accuracy varied between 93% and 105% and precision between 3% and 8%. External calibration and background interferences were checked through a calibrator addition procedure. Our method has shown high accuracy, precision, and sensitivity, as well as linearity within a wide range of values. Our methodology, developed by treatment of reference material and pooled milk samples, was applied for determination of Cu, Zn, As, Cd, Hg, and Pb in 120 human breast milk samples.     

Organic heterocyclic-based colorimetric and fluorimetric chemosensors for the detection of different analytes: a review (from 2015 to 2022)

Heterocyclic organic compounds, also called heterocycles, are any major class of organic compounds having at least one atom other than carbon in the ring. Due to their excellent electronic and structural features, these compounds exhibit a wide range of biological and nonbiological applications. Among these, indole, benzimidazole, benzothiazole, and benzoxazole are versatile organic heterocyclic compounds widely used in different fields. They show a wide range of applications in polymer, coordination chemistry, pharmacy, dyes, food packages, medicine, and industries. These compounds contain heteroatoms like S-, N-, and O-, through which they interact with metal ions, anions, and neutral species, giving measurable analytical signals that can be used as fluorimetric and colorimetric chemosensors for detecting different analytes in biological, agricultural and environmental samples. This review summarizes indole, benzimidazole, benzothiazole, and benzoxazole-based fluorimetric and colorimetric chemosensors for detecting metal ions, anions, and neutral species. Furthermore, the recognition mechanisms have been discussed in detail, which could help researchers to design efficient, highly selective, and sensitive chemosensors to recognize and determine heavy metal cations.     

Tools and resources for metabolomics research community: A 2017–2018 update

The scale at which MS‐ and NMR‐based platforms generate metabolomics datasets for both research, core, and clinical facilities to address challenges in the various sciences—ranging from biomedical to agricultural—is underappreciated. Thus, metabolomics efforts spanning microbe, environment, plant, animal, and human systems have led to continual and concomitant growth of in silico resources for analysis and interpretation of these datasets. These software tools, resources, and databases drive the field forward to help keep pace with the amount of data being generated and the sophisticated and diverse analytical platforms that are being used to generate these metabolomics datasets. To address challenges in data preprocessing, metabolite annotation, statistical interrogation, visualization, interpretation, and integration, the metabolomics and informatics research community comes up with hundreds of tools every year. The purpose of the present review is to provide a brief and useful summary of more than 95 metabolomics tools, software, and databases that were either developed or significantly improved during 2017–2018. We hope to see this review help readers, developers, and researchers to obtain informed access to these thorough lists of resources for further improvisation, implementation, and application in due course of time.     

Antihypertensive activity of indole and indazole analogues: A review

Heterocyclic compounds occupy an important position in chemistry because of their wide range of uses in drug design, photochemistry, agrochemicals, and other fields. Indole and indazole scaffolds are available from natural and synthetic sources, and molecules containing these scaffolds have been shown to have various biological effects, including anti-inflammatory, antibacterial, antiviral, antifungal, analgesic, anticancer, antioxidant, anticonvulsant, antidepressant, and antihypertensive activities. Indole and indazole molecules bind to receptors with high affinity, and thus are useful for the study of bioactive compounds involved in multiple pathways. In this review, we highlight the antihypertensive activity and the mechanisms of action of indole and indazole derivatives. In addition, structure–activity relationship studies of the antihypertensive effect are presented.     

Review: Recent Developments in Enzyme-Based Biosensors for Biomedical Analysis

The need for simple, rapid, cost-effective, and portable screening methods has boosted the development of practical biosensors with applications in clinical monitoring, and diagnosis of disease. Compared with traditional analytical methods, enzyme-based bioanalytical devices have several distinct advantages such as high sensitivity and specificity, portability, cost-effectiveness, and the possibilities for miniaturization and mass production. Additionally, they can be developed for point-of-care diagnostic testing. This paper reviews recent advances in the development of enzyme biosensors, design characteristics, performances, and applications with a focus on electrochemical and optical sensors. Recent emerging technologies and innovative biosensing designs, such as nanosensors, paper based-sensors, lab-on-a-chip, biochips, and microfluidic devices are discussed. Specific applications in bioanalysis, clinical diagnosis, and pharmacology are discussed.     

A review on elastic graphene aerogels: Design,preparation, and applications

Graphene aerogels with unique properties, such as ultralow density, super-elasticity, high specific surface area, and excellent thermal stability, have undergone great progress in the past decades. Especially, super-elastic graphene aerogels provide a highly attention-catching platform for developing advanced energy devices, pressure sensors, contaminates adsorbents, and electromagnetic wave shielding and absorption materials, and so forth. In this review, we begin with the introduction and discussion of various fabrication techniques and compare their advantages and disadvantages, focusing on the template-free assembly process and template-assisted assembly process. Then, we summarize the factors influencing the compressibility and elasticity of graphene aerogels, including intrinsic properties of building blocks, constituent materials, and structure design, and their wide applications. At the end, we discuss the current challenges and future prospects of this field.     

SYNTHESIS, CHARACTERIZATION, THERMAL DEGRADATION AND ELECTROCHEMICAL PROPERTIES OF OLIGO-4-m-TOLYLAZOMETHINEPHENOL

The oxidative polycondensation reaction conditions of 4-m-tolylazomethinephenol （4-TAMP） in the presence of air O2 and NaOCl as oxidants were studied in an aqueous alkaline medium between 50 and 90℃. The structures of the obtained monomer and oligomer were confirmed by FT-IR, UV-Vis, ^1H- and ^13C-NMR and elemental analysis techniques. The physical characterization was made by TG-DTA, size exclusion chromatography （SEC） and solubility tests. At the optimum reaction conditions, the yield of oligo-4-m-tolylazomethinephenol （O-4-TAMP） was found to be 62.50% （for air O2 oxidant） and 90.0% （for NaOCl oxidant）, respectively. According to the SEC analysis, the number-average molecular weight （Mn）, weight-average molecular weight （Mw） and polydispersity index （PDI） values of O-4-TAMP were found to be 2310, 2610 g tool 1 and 1. 13, respectively, using air O2, and 1390, 1710 g mol^-1 and 1.23, using NaOCl, respectively. According to TG-DTA analyses, O-4-TAMP was more stable than 4-TAMP against thermal decomposition. The weight losses of 4-TAMP and O-4-TAMP were found to be 68% and 58% at 1000℃. Electrical conductivity of the O-4-TAMP was measured, showing that the polymer is a typical semiconductor. Electrochemically, the highest occupied molecular orbital （HOMO）, the lowest unoccupied molecular orbital （LUMO） and electrochemical energy gaps （E＇g） for 4-TAMP are -5.96, -3.22 and 2.74 eV, respectively. The HOMO, LUMO and （E＇g） for O-4-TAMP are -5.78, -3.44 and 2.34 eV, respectively. According to UV-Vis measurements, optical band gaps （Eg） of 4-TAMP and O-4-TAMP were found to be 3.45 and 3. 1 0 eV, respectively.     

Cover Picture: Nanomaterials for Fluorescence and Multimodal Bioimaging (Chem. Rec. 3/2023)

Bioconjugated nanomaterials replace molecular probes in bioanalysis and bioimaging in vitro and in vivo. Nanoparticles of silica, metals, semiconductors, polymers, and supramolecular systems, conjugated with contrast agents and drugs for image-guided (MRI, fluorescence, PET, Raman, SPECT, photodynamic, photothermal, and photoacoustic) therapy infiltrate into preclinical and clinical settings. Small bioactive molecules like peptides, proteins, or DNA conjugated to the surfaces of drugs or probes help us to interface them with cells and tissues. Nevertheless, the toxicity and pharmacokinetics of nanodrugs, nanoprobes, and their components become the clinical barriers, underscoring the significance of developing biocompatible next-generation drugs and contrast agents. This account provides state-of-the-art advancements in the preparation and biological applications of bioconjugated nanomaterials and their molecular, cell, and in vivo applications. It focuses on the preparation, bioimaging, and bioanalytical applications of monomodal and multimodal nanoprobes composed of quantum dots, quantum clusters, iron oxide nanoparticles, and a few rare earth metal ion complexes.     

Semiconductor quantum dots and metal nanoparticles: syntheses,optical properties,and biological applications

We review the syntheses, optical properties, and biological applications of cadmium selenide (CdSe) and cadmium selenide–zinc sulfide (CdSe–ZnS) quantum dots (QDs) and gold (Au) and silver (Ag) nanoparticles (NPs). Specifically, we selected the syntheses of QDs and Au and Ag NPs in aqueous and organic phases, size- and shape-dependent photoluminescence (PL) of QDs and plasmon of metal NPs, and their bioimaging applications. The PL properties of QDs are discussed with reference to their band gap structure and various electronic transitions, relations of PL and photoactivated PL with surface defects, and blinking of single QDs. Optical properties of Ag and Au NPs are discussed with reference to their size- and shape-dependent surface plasmon bands, electron dynamics and relaxation, and surface-enhanced Raman scattering (SERS). The bioimaging applications are discussed with reference to in vitro and in vivo imaging of live cells, and in vivo imaging of cancers, tumor vasculature, and lymph nodes. Other aspects of the review are in vivo deep tissue imaging, multiphoton excitation, NIR fluorescence and SERS imaging, and toxic effects of NPs and their clearance from the body. Figure Semiconductor quantum dots and metal nanoparticles have extensive applications, e.g., in vitro and in vivo bioimaging Tamitake Itoh and Abdulaziz Anas contributed equally to this article.     

天然化合物芦丁的治疗潜力

芦丁属于类黄酮化合物,广泛存在于人们日常食用的各种蔬菜、水果和中草药中。 芦丁是天然的抗氧化剂,有清除自由基的特性,可调节众多疾病有关的细胞内和细胞外信号通路,影响细胞的生长,分化及其功能,对人们的健康,防病治病起着重要作用。芦丁具有广泛的药理活性,抗氧化、抗炎、抗病毒、抗癌、预防和治疗心脑血管疾病。以芦丁为原料的药品有多种,使用芦丁毒副作用小,安全,成本低。由于芦丁的生物利用度低,在临床上应用受到一定的限制。克服芦丁溶解性差的问题已经有各种方法,例如使用环糊精的络合,磷脂等,改善水溶性,从而增加生物利用度。本文综述了芦丁的多种潜在用途和治疗作用的信息,与药物输送相关的问题,以及改善药物生物利用度的可能方法。重点介绍了芦丁的抗炎、抗癌、降糖、对心血管的保护作用,为天然化合物的开发和利用奠定基础。     

Contributions to the Chemistry of the Binary Compounds of the Transition Elements

Phase and structural relationships of the sulfur, selenium, and tellurium compounds of the 4d and 5d transition elements of groups IV to VII of the periodic system are discussed. Homologous elements behave very similarly with respect to the chalcogens, and this is particularly the case for niobium and tantalum, and for molybdenum and tungsten. However, zirconium, niobium, and molybdenum have a greater tendency towards formation of chalcogen-poor phases than their homologues hafnium, tantalum, and tungsten. Subchalcogenides are known only for zirconium and niobium. The number of phases and the tendency towards formation of solid solutions are considerably smaller among the tellurides than among the sulfides and selenides. The crystal structures of the telluride phases also differ from those of the sulfide and selenide phases of analogous composition. In addition, a review of the phase and structural relationships of the arsenic and antimony compounds of the 4d and 5d transition elements of groups V to VII is given.     

蛋白质、凝胶电泳及其分析应用

蛋白质是重要的生物高分子，具有催化、传输、运动、防御和调节等重要生理功能，其分离、纯化和表征对理解和利用它们在生命过程中的作用具有重大理论意义和实际价值。凝胶电泳是蛋白质测定中应用最广泛和最强有力的工具。本文讨论凝胶电泳方法及其在蛋白质分析方面的新进展。首先介绍蛋白质的性质和功能，然后讨论蛋白质试样制备方法，最后评述各种凝胶电泳分离技术及其在蛋白质分离、纯化和表征等方面的应用。     

含希夫碱侧基聚酯及其锌配合物的合成和性能

经多步反应合成2种新型含希夫碱侧基聚酯(P5,P6),进一步与醋酸锌反应得到2种聚酯锌配合物(P5-Zn,P6-Zn)。 采用元素分析、FT-IR、UV-Vis、¹H NMR、GPC、TG、DSC和荧光光谱等技术手段对其结构和性能进行表征。 P5和P6均溶于四氢呋喃(THF)、氯仿(CHCl₃)、N,N-二甲基甲酰胺(DMF)、N,N-二甲基乙酰胺(DMAc)、二甲基亚砜(DMSO)、N-甲基吡咯烷酮法(NMP)等有机溶剂,P5-Zn和P6-Zn部分溶于THF及CHCl₃,溶于DMF、DMAc、DMSO、NMP等有机溶剂。 P5和P6的重均相对分子质量M_w及相对分子质量分布指数PDI分别为4164、6148 g/mol和1.42、1.43。 P5、P6、P5-Zn和P6-Zn的5%失重温度分别为339、348、367和358℃。 P5、P6、P5-Zn和P6-Zn的玻璃化转变温度T_g分别为88.8、123.3、39.8和63.8 ℃。 P5和P6的DMF溶液(5×10^-5 mol/L)在418和416 nm处发射弱紫色荧光,P5-Zn和P6-Zn的DMF溶液(5×10^-5 mol/L)在505和506 nm处发射强绿色荧光,固体P5-Zn和P6-Zn在527和532 nm处发射强绿色荧光。     

STUDIES ON COMBUSTION BEHAVIOR OF NR/MMT NANO-COMPOSITES BY CONE CALORIMETER

The NR/modified montmorillonite(EMT)nano-composites were prepared by mechanical mixing and reacting in situ with glycidyl methacrylate.Under 30 kW.m~(-2)of heat flux,the combustion behavior of the nano-composites was studied with cone calorimetry,and PHRR,THR,EHC,TSR and MLR were tested.The results showed that the nano- composite had improved mechanical properties and flame retardance properties,and to some extent,the nano-composite had smoke suppress effect.Compared with pure NR,the PHRR,EHC and SPR of the nano-composite reduced by 34%,21% and 16.8%,respectively.     

Density,viscosity, and surface tension of binary liquid systems: Ethanoic acid,propanoic acid,and butanoic acid with nitrobenzene

Density, viscosity, and surface tension of three binary liquid systems: ethanoic acid+nitrobenzene, propanoic acid+nitrobenzene, and butanoic acid+nitrobenzene have been determined at 25, 35, and 45°C, over the whole composition range. The excess molar volumes, viscosities, Gibbs energies for the activation of flow, and surface tension were evaluated and fitted to a Redlich-Kister type of equation. The Grunberg-Nissan parameter d was also calculated. Binary viscosity data were fitted to the models of McAllister, Heric, Krishnan, and Laddha, Auslander, and Teja and Rice. Surface tension data were fitted to the models of Zihao and Jufu, Rice, and Teja, and an empirical two-constant model.     

Synthesis and characterization of mixed ligand complexes of Zn(II) and Co(II) with amino acids: Relevance to zinc binding sites in zinc fingers

Mixed ligand complexes of Zn(II) and Co(II) with cysteine, histidine, cysteinemethylester, and histidinemethylester have been synthesized and characterized by elemental analysis, conductivity, magnetic susceptibility measurements, and infrared,¹H NMR, TGA and FAB mass spectra. In these complexes, histidine, and histidinemethylester act as bidentate ligands involving amino and imidazole nitrogens in metal coordination. Similarly, cysteine, and cysteinemethylester also act as bidentate ligands coordinating through thiol sulphur and amino nitrogen. Tetrahedral geometry has been proposed for Zn(II) and Co(II) complexes based on experimental evidence.     

Spiropyran-based advanced photoswitchable materials: A fascinating pathway to the future stimuli-responsive devices

Recent years have witnessed tremendous progress and developments of the photoswitchable spiropyran-based polymers, owing to distinctive and particular physicochemical properties of their isomers upon a variety of triggers, and especially light illumination. Light is a fascinating and green stimulus because of its remote control, micron- or submicron-sized focusing area with controllable wavelength and energy, non-invasiveness and non-destructive nature, precisely controlled direction, and availability. In this review, we have emphasized on and summarized the most recent observations and efforts in the progress of photoswitchable spiropyran-based materials and their applications as sensors for heavy metal cations, anions, pH, acid and base vapors, wettability and humidity. Other items include data recording and anticounterfeiting devices, photorheological fluids, optically reversible switching membranes, photoregulating surface plasmon resonance, photomodulation of ion conductivity and mechanoresponsive polymers. The bio-based field is another interesting subject that is discussed here and consists of reversible cell sheet engineering, photodynamic therapy, switchable fluorescence labeling, controlled drug delivery and biological ion channels. On the other hand, limited light penetration inside the living tissues and hazards of high-energy ultraviolet irradiation for initiating photochemical transformations have limited the use of such light-controlled systems in medicinal and therapeutic means. Those spiropyran-based materials which are susceptible to being triggered by low energy near IR (NIR) two-photon light irradiation and upconversion nanoparticles are recently under serious explorations and have been reviewed as a new perspective for their advanced applications.