Oxidation of Sulfides with N‐Bromosuccinimide in the Presence of Hydrated Silica Gel

An efficient and highly selective procedure for oxidation of sulfides to sulfoxides with N‐bromosuccinimide (NBS) in the presence of hydrated silica gel has been developed. Hydrated silica gel supplies the water necessary for decomposition of the intermediate bromosulfonium salt to the product, allowing the reaction to employ a nonaqueous media. Also, this procedure has increased the scope of the reaction by oxidizing a wider variety of sulfides, which was not possible until now.     

Oxidative Cleavage of Oximes with Silica‐Gel‐Supported Chromic Acid in Nonaqueous Media

A simple procedure for a clean and high‐yielding oxidative deoximation of benzaldoximes and ketoximes using a silica‐gel‐supported chromic acid reagent has been developed. This solid‐supported reagent allows us to carry out this reaction in nonaqueous dichloromethane reaction media.     

A Facile Synthesis of Benzo[h]quinolines via Silica‐TsOH‐P2O5 Promoted Condensation of 1‐Naphthylamines with 1,3‐Diketones under Solvent Free Conditions

A facile synthesis of benzo[h ]quinolines has been developed via improved Combes reaction. A combination of silica gel, p ‐toluenesulfonic acid and phosphorus pentoxide was utilized to promote the condensation of 1‐naphthylamines with 1,3‐diketones under solvent free conditions. In this case, silica gel was used as reaction media, p ‐toluenesulfonic acid and phosphorus pentoxide were acted as catalyst and dehydrating agent, respectively.     

Silica‐Gel‐Supported Ceric Ammonium Nitrate (CAN): A Simple and Efficient Solid‐Supported Reagent for Oxidation of Oxygenated Aromatic Compounds to Quinones

A silica‐gel‐supported heterogeneous ceric ammonium nitrate (CAN) reagent has been developed for oxidizing oxygenated aromatics to quinones in nonaqueous media. The advantages of this procedure include excellent yields, mild reaction conditions, nonaqueous media, short reaction times, and easy product isolation.     

Oxidative Deprotection of Acetals and Trimethylsilylethers by γ‐PCC‐SiO2

Acetals, ketals and trimethylsilyl ethers mildly and selectively underwent oxidative deprotection to carbonyl compounds by silica gel supported γ‐picolinium chlorochromate under non‐aqueous conditions in good to excellent yields.     

A Simple and Efficient Procedure for Oxidation of Sulfides to Sulfoxides on Hydrated Silica Gel with Ceric Ammonium Nitrate (Can) In Methylene Chloride

A simple, fast and efficient procedure for oxidation of sulfides to the corresponding sulfoxides with CAN mediated by hydrated silica gel in methylene chloride has been developed. To our knowledge, this is the first example of oxidation of sulfides with CAN in a non-aqueous media.     

Selective Solid‐phase Extraction of Cu2+ by a Novel Cu(II)‐imprinted Silica Gel

A new Cu(II)‐imprinted salen functionalized silica gel adsorbent was synthesized by surface imprinting technique and was employed as a selective solid phase extraction material for Cu²⁺ removal from aqueous solutions. The samples were characterized by FT‐IR, ¹HNMR, ¹³CNMR, CHNS and DTG techniques. The BET surface area of the silica gel was also determined. The adsorbent was then used for removal of Cu²⁺ from aqueous solutions under different experimental conditions. It was concluded that the synthesized imprinted silica gel had higher selectivity and capacity compared to the non‐imprinted silica gel and the maximal adsorption capacity of 67.3 and 56.5 mg.g^?1 was obtained respectively for ion‐imprinted and non‐imprinted adsorbents. The relative selectivity factor (β) of 50.32 and 31.94 was obtained respectively for Cu²⁺/Ni²⁺ and Cu²⁺/Zn²⁺ pairs. The dynamic adsorption capacity of the imprinted adsorbent was close to the static adsorption capacity due to the fast kinetic of adsorption. Furthermore, the ion‐imprinted adsorbent was recovered and repeatedly used and satisfactory adsorption capacity with acceptable precision was obtained. Each experiment was repeated at least for three times and the mean and the standard deviation for each measurement were calculated. The applicability of the method was examined for Zayandehrood water as real sample. Acceptabe standard deviation was obtained.     

A Potent Halogen‐Bonding Donor Motif for Anion Recognition and Anion Template Mechanical Bond Synthesis

The covalent attachment of electron deficient perfluoroaryl substituents to a bis‐iodotriazole pyridinium group produces a remarkably potent halogen bonding donor motif for anion recognition in aqueous media. Such a motif also establishes halogen bonding anion templation as a highly efficient method for constructing a mechanically interlocked molecule in unprecedented near quantitative yield. The resulting bis‐perfluoroaryl substituted iodotriazole pyridinium axle containing halogen bonding [2]rotaxane host exhibits exceptionally strong halide binding affinities in competitive 50 % water containing aqueous media, by a factor of at least three orders of magnitude greater in comparison to a hydrogen bonding rotaxane host analogue. These observations further champion and advance halogen bonding as a powerful tool for recognizing anions in aqueous media.     

Preparation,Spectroscopic Properties,and Stability of Water‐Soluble Subphthalocyanines

A series of subphthalocyanines containing an axial pyridyl, amino, or carboxy group have been prepared. They undergo N‐methylation or deprotonation readily to give a new series of water‐soluble subphthalocyanines. All the compounds have been characterized with various spectroscopic methods and elemental analysis. The molecular structure of the amino analogue SPc(OCH₂CH₂NMe₂) ( 6 ) has also been determined by X‐ray diffraction analysis. All these compounds are essentially non‐aggregated in DMF as shown by the strong Q‐band absorption. The low aggregation tendency of these compounds also results in strong fluorescence emission and high efficiency in generating singlet oxygen. In the presence of Cremophor EL, these compounds also remain in the monomeric form in aqueous media and can sensitize the formation of singlet oxygen. The carboxy and carboxylate derivatives exhibit a relatively higher photostability than the amino and cationic pyridinium and ammonium counterparts, making them potentially useful as photosensitizers in aqueous media.     

Synthesis and Characterization of Hydroxy Substituted Pyridinium Type of Ionic Liquids via Conventional/ Silica Supported Approaches and Their Applications

Synthesis of 2‐hydroxy pyridinium type of ionic liquids is obtained via conventional as well as silica‐supported approaches. We found that solid‐supported reaction under muffle furnace condition has reduced the reaction nearly 20 times shorter than the conventional method. We have studied the catalytic activities of our synthesized pyridinium salts for one‐pot preparation of substituted quinolone derivatives and radical bromination of toluidine with optimized reaction conditions.     

Palladium–quaternary phosphonium phase transfer catalyst brush assembly as reusable and environmentally benign catalyst for coupling of aryl halides and sodium tetraphenylborate in neat water

A first example of simultaneous covalent anchoring of a palladate anion–phosphonium cation matrix on the surface of silica nanoparticles and application in the Suzuki coupling reaction of a variety of different haloarenes and sodium tetraphenylborate in neat aqueous media without the addition of any organic co‐solvent are described. Copyright © 2015 John Wiley & Sons, Ltd.     

Nitrophenol resins for facile amide and sulfonamide library synthesis

Novel nitrophenol solid supports based on various resin materials (polystyrene, TentaGel, macroporous, PEGA, and silica gel) are reported for facile amide and sulfonamide library synthesis. The broad choice of resin materials available will allow the reaction to occur successfully in solvents ranging from nonpolar organic solvents to aqueous media.     

Influence of reaction parameters on the structure of in situ rubber/silica compounds synthesized via sol–gel reaction

In situ silica was synthesized in three non‐vulcanized rubber matrices, namely natural rubber, styrene‐butadiene rubber, and EPDM (ethylene‐propylene diene ter‐polymer), using the sol–gel method with tetra‐ethoxysilane (TEOS) as silica precursor and hexylamine as catalyst. The effect of the reaction parameters such as the amount of TEOS, the reaction time (15–120 min), and the type of rubber was explored. Transmission electron microscopy was used to study the gradient in silica content and particle size over the sample thickness. The diffusion gradient of TEOS and catalyst solution in the rubber matrix responsible for the gradient was studied with Fick's law. An excellent dispersion of silica was obtained for all rubbers, even for the very non‐polar EPDM, without the use of any additives to improve the dispersion. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 967–978     

Direct Electrochemistry of Cytochrome c on a Silica Sol‐Gel Film Modified Electrode

Dilute silica sol‐gel was simply dropped on the surface of a basal plane graphite electrode (BPGE) to form a silica sol‐gel film modified electrode. Direct electrochemical response of cytochrome c (Cyt c) on the modified electrode was observed by cyclic voltammetry (CV). The results suggested that Cyt c could be tightly adsorbed on the surface of the silica sol‐gel film modified electrode. A couple of well‐defined and nearly reversible redox peaks can be observed in a phosphate buffer solution (pH 7.0), which anodic and cathodic peak potentials were at ?0.243 and ?0.306 V (vs. Ag/AgCl), respectively. Cyt c adsorbed on the surface of silica sol‐gel film shows a remarkable electrocatalytic activity for the reduction of oxygen. Based on these, a third‐generation biosensor could be constructed to detect the concentration of oxygen in aqueous solution.     

Adsorption of poly(N‐ethyl‐4‐vinyl pyridinium bromide) onto langmuir‐blodgett films built up from amphiphilic polymers

The interaction of a strong cationic polyelectrolyte, poly(N‐ethyl‐4‐vinyl pyridinium bromide), with Langmuir‐Blodgett (LB) films built up from four monolayers of amphiphilic derivatives of the alternating copolymers of maleic acid and alkenes (one of the monolayers was formed by the amphiphilic copolymer containing pyrenyl groups as fluorescent labels) was examined. Transformations of absorbance spectra and quenching of fluorescence of the LB films were detected after their contact with aqueous solutions of the cationic polyelectrolyte. These changes were attributed to the adsorption of poly(N‐ethyl‐4‐vinyl pyridinium bromide) onto such films. The efficiency of this process was found to be rather sensitive to the variations in pH of the surrounding medium: adsorption of the cationic polyelectrolyte onto the LB films was pronounced in basic media while it became rather weak in acidic media.     

Reaction of Acetals with Various Carbon Nucleophiles under Non‐Acidic Conditions: C?C Bond Formation via a Pyridinium‐Type Salt

Mild substitution reactions of acetals with carbon nucleophiles via the pyridinium‐type salts generated by the treatment of acetals with TESOTf‐2,4,6‐collidine or 2,2′‐bipyridyl have been developed. Various carbon nucleophiles, such as organocuprates, silyl enol ethers, enamines, etc., reacted with the pyridinium‐type salts to give the corresponding substituted products in good yields. The reactions proceeded under very mild conditions (non‐acidic conditions) and thus acid‐sensitive functional groups can be tolerated during the reaction. In addition, only an acetal can form the pyridinium‐type salt and react with nucleophiles in the presence of a ketal. This unusual selectivity is in contrast to general methods conducted under acidic conditions.     

AlCl3/PCC-SiO2-Promoted Oxidation of Azaindoles and Indoles

Abstract

A simple and efficient method is described for the oxidation of 7-azaindoles and indoles to 7-azaisatins and isatins using pyridinium chlorochromate–silica gel (PCC-SiO₂) with the aid of Lewis acid catalyst aluminium chloride (AlCl₃) in dichloroethane. Simplicity of the reaction conditions, easy workup procedure, and good yields are the key features of this protocol.     

Synthesis of some new indolizines

The reaction between 4‐dimethylaminopyridine (DMAP) and 2‐bromoacetophenone(s) readily gives 1‐ [2‐(4‐substitutedphenyl)‐2‐oxoethyl]‐4‐(dimethylamino)pyridinium bromide ( 1–14 ). Action of aqueous NaOH on 1–8 generates the corresponding pyridinium ylide ( 15–22 ), which is isolated as a colored stable crystalline solid. Addition of 15–22 to dimethylacetylene dicarboxylate (DMAD) gives dimethyl 3‐(substitutedbenzoyl)‐7‐(dimethylamino)indolizine‐1,2‐dicarboxylate ( 23–30 ) in 46–62% yield.     

Vinylboronic Acids as Fast Reacting,Synthetically Accessible,and Stable Bioorthogonal Reactants in the Carboni–Lindsey Reaction

Bioorthogonal reactions are widely used for the chemical modification of biomolecules. The application of vinylboronic acids (VBAs) as non‐strained, synthetically accessible and water‐soluble reaction partners in a bioorthogonal inverse electron‐demand Diels–Alder (iEDDA) reaction with 3,6‐dipyridyl‐s‐tetrazines is described. Depending on the substituents, VBA derivatives give second‐order rate constants up to 27 m ⁻¹ s⁻¹ in aqueous environments at room temperature, which is suitable for biological labeling applications. The VBAs are shown to be biocompatible, non‐toxic, and highly stable in aqueous media and cell lysate. Furthermore, VBAs can be used orthogonally to the strain‐promoted alkyne–azide cycloaddition for protein modification, making them attractive complements to the bioorthogonal molecular toolbox.     

Vinylboronic Acids as Fast Reacting,Synthetically Accessible,and Stable Bioorthogonal Reactants in the Carboni–Lindsey Reaction

Bioorthogonal reactions are widely used for the chemical modification of biomolecules. The application of vinylboronic acids (VBAs) as non‐strained, synthetically accessible and water‐soluble reaction partners in a bioorthogonal inverse electron‐demand Diels–Alder (iEDDA) reaction with 3,6‐dipyridyl‐s‐tetrazines is described. Depending on the substituents, VBA derivatives give second‐order rate constants up to 27 m ^?1 s^?1 in aqueous environments at room temperature, which is suitable for biological labeling applications. The VBAs are shown to be biocompatible, non‐toxic, and highly stable in aqueous media and cell lysate. Furthermore, VBAs can be used orthogonally to the strain‐promoted alkyne–azide cycloaddition for protein modification, making them attractive complements to the bioorthogonal molecular toolbox.