Reissert compound studies. XXXVI. Observations on 1,7-, 4,6-, 4,7-, and 1,10-phenanthrolines

Reissert compounds have been prepared from 1,7-, 4,6-, and 4,7-phenanthrolines. In the case of 4,7-phenanthroline, both mono- and di-Reissert compounds have been prepared. A number of Reissert analogs have also been prepared in this series. 1,10-Phenanthroline fails to give a Reissert compound.     

Synthesis of haginin E, equol, daidzein, and formononetin from resorcinol via an isoflavene intermediate

New syntheses of haginin E, equol, daidzein, and formononetin are described in this Letter. Through a sequence of a Wittig reaction, O-alkylation, and another Wittig reaction, 4-benzyloxysalicylaldehyde, which was prepared from resorcinol in two steps, was converted into the desired diene in one pot. Subsequently, the prepared diene was subjected to ring-closing metathesis using Grubbs’ catalyst (II) to construct the desired isoflavene intermediate. Using the prepared isoflavene, certain isoflavonoids such as haginin E, equol, daidzein, formononetin, and other related compounds were derived smoothly and in good overall yields.     

Rediscovering silicones: molecularly smooth, low surface energy, unfilled, UV/vis-transparent, extremely cross-linked, thermally stable, hard, elastic PDMS

We demonstrate the preparation of extremely cross-linked poly(dimethylsiloxane) (PDMS)-based materials and report optical, mechanical, and surface properties. Transparent monolithic molded objects are prepared catalytically with no byproducts; parts per million levels of platinum (catalyst) remain in the articles. Essentially the same material was prepared in 1993 and described as a "hard transparent glass." We confirm the thermal stability and chemical structure described in this report. We show that the catalytic reaction used, which was reported in 1999 always to exhibit a "violent exotherm", can be controlled conveniently using a low (parts per million) catalyst concentration. The combination of low surface energy, transparency, hardness, elasticity, and thermal stability makes this an unusual and interesting material. That it can be prepared from commercially available low-viscosity monomers adds to its interest. We comment that the class of materials known as siloxanes or silicones and PDMS in particular is not currently generally well understood (or taught) and review aspects of the structure, properties, and cross-linking chemistry of PDMS.     

Total syntheses of tambjamines C, E, F, G, H, I and J, BE-18591, and a related alkaloid from the marine bacterium Pseudoalteromonas tunicata

The acetate salts of tambjamines C, E, and F (2-4, respectively), as well as those of the related alkaloids BE-18591 (5) and 6, have been prepared by treatment of bipyrrole aldehyde 16 with the relevant amine in the presence of acetic acid. The 5'-bromo-analogue, 30, of compound 16 has also been prepared and used to obtain the acetate salts of tambjamines G, H, I, and J (8-11 respectively).     

Graphite from hydrolysis lignin: Preparation procedure,structure, properties,and application

The possibility of preparing graphite from hydrolysis lignin using pyrolysis and graphitization processes was considered. The influence of lignin milling on the granulometric composition of the graphite obtained was studied. The structure of graphite prepared from lignin was confirmed by X-ray diffraction analysis. Prospects for using graphite materials prepared from lignin in electrochemical and other technologies are demonstrated.     

8-Alkenylborondipyrromethene dyes. General synthesis, optical properties, and preliminary study of their reactivity

A new series of 8-alkenylBODIPY dyes were prepared via the Liebeskind-Srogl cross-coupling starting from 8-thiomethyl-substituted BODIPY. Ten derivatives were prepared using alkenylboronic acids in good to excellent yields (79-97%), and one additional example was prepared from an alkenylstannane in 74% yield. The products display Michael acceptor-like reactivity. The alkenyl fragment quenches the fluorescence of the BODIPY core, which is turned back on by reducing the double bond.     

Furanosteroid studies. Improved synthesis of the A,B,C,E-ring core of viridin

The tetracyclic core skeleton of the furanosteroid viridin is prepared in nine steps from readily available materials. The key step in the synthesis is a facile acid-promoted cyclodehydration of an aryloxyketone to prepare the benzofuran moiety. From this intermediate, the known target skeleton is prepared in four steps. This new synthesis is a six-step improvement over the previously reported one.     

Synthesis and Properties of Polyamides,Polyimides, and a Polyamide-Imide Based on Trimethylene Glycol-Di-p-Aminobenzoate

New polyamides, polyimides, and a polyamide-imide containing ester linkages were prepared by the reaction of trimethylene glycol di-p-aminobenzoate with terephthaloyl chloride, isophthaloyl chloride, adipoyl chloride, pyromellitic dianhydride, benzophenone tetracarboxylic dianhydride, and trimellitoyl chloride. the low temperature solution and interfacial polymerization techniques were utilized to prepare the above-mentioned polymers. the polymers thus prepared were found to be soluble in solvents like DMAC and DMSO and had inherent viscosities in the 0.15-0.60 range. the polyimides prepared formed transparent and flexible films.     

High performance polyethersulfone UF membrane for manufacturing spiral wound module: preparation,morphology, performance,and chemical cleaning

Large sheet asymmetric polyethersulfone (PES) ultrafiltration membranes were prepared via phase inversion process in a continuous conveyor system with addition of PVP to the casting solution. Dimethylacetamide (DMAc) and mixture of water and isopropyl alcohol (70/30 v%) were used as solvent and non‐solvent respectively. The prepared membrane was 0.96 m wide and 3 m long. The pieces of the membrane were selected randomly for characterization in terms of performance using cross flow filtration for milk concentration, image analysis, scanning electron microscopy (SEM), and cleaning procedures. It was found that the prepared membrane has high porosity and high water flux during milk filtration. In addition, cleaning experiments indicated that NaOH/HCl/NaOH sequence is an effective procedure for cleaning the fouled membrane during milk concentration. Copyright © 2007 John Wiley & Sons, Ltd.     

Formation, structure, and reactivity of amino-terminated organic films on silicon substrates

Amino-functionalized organic films were prepared by self-assembling 3-aminopropyltriethoxysilane (APTES) on silicon wafers in either anhydrous toluene or phosphate-buffered saline (PBS) for varied deposition times. Fourier transform infrared spectroscopy (FTIR) and ellipsometry have shown that the structure and thickness of APTES films are governed by the deposition time and reaction solution. Deposition from an anhydrous toluene solution produces APTES films ranging from 10 to 144 A in thickness, depending on the reaction time. FTIR spectra indicate that film growth initially proceeds by adsorption of APTES to the silicon surface followed by siloxane condensation, and after an extended period of time APTES molecules accumulate on the underlying APTES film by either covalent or noncovalent interactions. In contrast, spectroscopically indistinguishable APTES films in thickness ranging from 8 to 13 A were formed when deposition was conducted in aqueous solutions. Measured water contact angles indicate that APTES films deposited in aqueous solutions are more hydrophilic compared to those prepared in toluene solutions. Fluorescence measurements revealed that APTES films prepared in toluene solutions contain more reactive surface amino groups by ca. 3 to 10 times than those prepared in aqueous solutions for the identical reaction time.     

一种高透明、可拉伸导电水凝胶的制备及其在电容传感器中的应用

导电水凝胶由于具备良好的电学特性、可调节的机械性能、易于加工性和生物相容性等,是制备柔性电子设备的理想基材。本文使用马来酸与丙烯酰胺作为共聚单体,氯化锂作为导电离子,N,N'-二甲基双丙烯酰胺作为交联剂,使用光引发剂,采用原位光聚合的方式制备了一种导电水凝胶。制得的水凝胶可见光透过率高达93%,最大拉伸形变~380%,导电率最大为12 S/m。鉴于其优异的综合性能,实验中使用导电水凝胶制备了电容传感器并应用于人体活动监测。结果表明,制备的导电水凝胶电容传感器对不同程度的手指弯曲形变和不同力度的手指触碰均表现出灵敏的响应行为,为未来可穿戴柔性电子产品的发展起到了一定的推动作用。     

The synthesis,interfacial, and colloidal properties of waterborne cationic methacrylic co-polymers

Two cationic polymers with similar composition were prepared by two different polymerization methods. By monitoring the evolution of the molar mass and chemical composition during the reactions together with charge density measurements and calculations, it was concluded that the cationic polymer synthesized by emulsion polymerization had a less uniform compositional distribution than the cationic polymer prepared by solution polymerization. Contributing to the heterogeneity was the hydrolysis of one monomer (dimethylamino ethylmethacrylate (DMAEMA)) during the synthesis. As a result, the polymer prepared by emulsion polymerization had a more blocky structure and was more surface active as supported by static and dynamic surface tensions data. Fluorescence experiments showed that both polymers formed aggregates at very low concentrations of approximately 0.01 wt%. The aggregates of the polymer prepared by emulsion polymerization were compact, whereas the solution polymerization-based polymer aggregates exhibited a rather expanded geometry.     

Syntheses of substituted-oxazolo-1,3,4-thiadiazoles, 1,3,4-oxadiazoles,and 1,2,4-triazoles

Starting from readily available methyl 5-methyloxazole-4-carboxylate ( 1 ) and 4-methyl-5-oxazolylcar-boxylic acid hydrazide ( 11 ) the title compounds were prepared. The reaction of compound 1 with hydrazine hydrate afforded the corresponding hydrazide 2 . The reaction of compound 2 with formic acid yielded 1-formyl-2-(5-methyloxazole-4-carboxyl)hydrazine ( 3 ). Refluxing of the latter with phosphorus pentasulfide in xylene gave compound 5 in 62% yield. The reaction of compound 3 with phosphorus pentoxide afforded compound 4 . Starting from hydrazide 11 , compounds 13 and 14 were prepared similarly. Reaction of compound 2 with substituted isothiocyanate yielded compound 9 which was cyclized in basic medium to 4-alkyl-5-(5-methyl-4-oxazolyl)-2,4-dihydro-3H-1,2,4-triazole-3-thione ( 10 ). The isomer 19 was prepared similarly. Methylation and subsequent oxidation of compound 19 gave compound 21 . Reaction of the acid 7 with thiosemicarbazide in the presence of phosphorus oxychloride gave 2-amino-5-(5-methyl-4-oxazolyl)1,3,4-thiadiazole ( 8 ). 2-Amino-5-(4-methyl-5-oxazolyl)-1,3,4-thiadiazole ( 17 ) was prepared from acyl chloride 15 by the usual method.     

Ionic polymerization of 1,2-butylene oxide: GPC,NMR, and IR characterization of the reaction products

The triphenylmethyl hexafluoroarsenate-initiated cationic polymerization of 1,2-butylene oxide in dichloroethane between ?25 and +25°C and its sodium-initiated anionic polymerization in bulk at 20°C have been carried out. Gel permeation chromatography (GPC) molecular weight distribution curves of the reaction products are multinodal. Nuclear magnetic resonance (NMR) and infrared (IR) analyses show that the cationically prepared polymers are composed of cyclic oligomers and linear high-molecular-weight products, while the anionically prepared polymers contain only linear products some of which include double bonds. NMR analyses further reveal that the cationically prepared polymers consist of monomer repeat units, while the anionically prepared polymers are essentially made of side products originating from the reaction of 1,2-butylene oxide with the sodium mirror used as the anionic initiator.     

Advances in catalysis,vol. 28 : Edited by D.D. Eley,H. Pines,and P.B. Weisz,Academic Press,New York,London, Toronto,San Francisco, 1979, xi + 403 pages, $52.00

Reagents prepared from diisobutylalane (dibal) or tributylstannane and copper(I) species hydrometallate terminal alkynes in a syn way.     

Cocrystals of Praziquantel with Phenolic Acids: Discovery,Characterization, and Evaluation

Solvent-assisted grinding (SAG) and solution slow evaporation (SSE) methods are generally used for the preparation of cocrystals. However, even by using the same solvent, active pharmaceutical ingredient (API), and cocrystal coformer (CCF), the cocrystals prepared using the two methods above are sometimes inconsistent. In the present study, in the cocrystal synthesis of praziquantel (PRA) with polyhydroxy phenolic acid, including protocatechuic acid (PA), gallic acid (GA), and ferulic acid (FA), five different cocrystals were prepared using SAG and SSE. Three of the cocrystals prepared using the SAG method have the structural characteristics of carboxylic acid dimer, and two cocrystals prepared using the SSE method formed cocrystal solvates with the structural characteristics of carboxylic acid monomer. For phenolic acids containing only one phenolic hydroxyl group (ferulic acid), when preparing cocrystals with PRA by using SAG and SSE, the same product was obtained. In addition, the weak molecular interactions that were observed in the cocrystal are explained at the molecular level by using theoretical calculation methods. Finally, the in vitro solubility of cocrystals without crystal solvents and in vivo bioavailability of PRA-FA were evaluated to further understand the influence on the physicochemical properties of API for the introduction of CCF.     

Benzylic manganese halides, sulfonates, and phosphates: preparation, coupling reactions, and applications in organic synthesis

The use of highly active manganese, prepared by the Rieke method, for the direct preparation of benzylic manganese reagents was investigated. The oxidative addition of the highly active manganese (Mn) to benzylic halides was easily completed under mild conditions. More importantly, benzylic manganese sulfonates and phosphates were prepared by direct oxidative addition of Mn to the carbon-oxygen bonds of benzylic sulfonates and phosphates. The resulting benzylic manganese reagents were found to undergo cross-coupling reactions with a variety of electrophiles. The majority of these reactions were carried out in the absence of any transition metal catalyst under mild conditions. This approach also provided a facile synthetic route to the preparation of resorcinolic lipids.     

Monodisperse,submicrometer-scale platinum colloidal spheres with high electrocatalytic activity

Monodisperse, submicrometer-scale platinum (Pt) colloidal spheres were prepared through a simple direct chemical reduction of p-phenylenediamine (PPD)-chloroplatinic acid (H₂PtCl₆) coordination polymer colloids. It was found that the prepared Pt colloids had the similar size and morphology with their coordination polymer precursors, and the prepared Pt colloids with rough surfaces were three-dimensional (3D) structured assemblies of high-density small Pt nanoparticles. The electrochemical experiments confirmed that the prepared Pt colloids possessed a high electrocatalytic activity towards mainly four-electron reduction of dioxygen to water, making the prepared Pt colloids potential candidates for the efficient cathode material in fuel cells.     

Preparation,chemical modification and absorption properties of various phthalocyanines

A series of phthalocyanines were prepared from phthalodinitrile and corresponding metal salts by means of the ‘solvent’ methods. Some experiments were also conducted in the absence of a solvent in a ‘solvent-free’ process from phthalanhydride, urea and metal chlorides. All of the prepared phthalocyanines were modified by the incorporation of desirable functional groups in order to transform the virtually insoluble phthalocyanine skeleton into more soluble forms. Derivatives soluble in polar media were prepared by means of sulphonation, while those soluble in non-polar media were produced by chlorosulphonation with the subsequent condensation of prepared sulphochlorides with primary alkyl amines.     

Synthesis of the Pheromones, (E)-3, 7-Dimethyl-2, 7-Octadienyl Propionate, (E)-3, 7-Dimethyl-2-Octene-1, 8-Diol and Frontalin from a Common Intermediate1

Ketal ester 9 has been prepared in five steps from methyl levulinate 4 (scheme 1). The propionate 1, diol 2 and (±) frontalin 3 were prepared from ester 9 employing the routes shown in scheme 2,3 and 4 respectively. The branched chain alkenes 13 and 20 were prepared conveniently from the primary alcohols 11 and 10 following the procedure of S.Wolff. Triethyl phosphonopropionate 7 has been prepared by methylating triethylphosphonoacetate with methyl iodide in the presence of sodium hydride.