共查询到20条相似文献,搜索用时 31 毫秒
1.
小波包分析用于重叠分析化学信号的处理 总被引:9,自引:1,他引:8
对小波包分析的算法进行了改进,并将此算法成功地应用于多组分重叠色谱信号的解析.结果表明,本文提出的算法解决了MRSD算法的不足,更适合处理分析化学信号,用于重叠信号的解析时不需重构(逆变换),简化了数据处理步骤,加快了数据解析速度,具有较强的解析能力.对于重叠色谱信号的解析,小波包分析比小波分析具有更强的解析能力. 相似文献
2.
《印度化学会志》2023,100(1):100837
The heat transfer phenomenon subject to thermos-diffusion effects convey important applications in the heating processes, extrusion systems, chemical processes and various engineering systems. The objective of current work is to observe the contribution of Soret and Dufour effects in oscillating shield for cross diffusion flow. The perpendicular shield with oscillating motion induced the flow. The magnitude of oscillations is assumed to be small so that laminar flow due to oscillating shield has been resulted. The motivations for addressing the thermos-diffusion phenomenon due to oscillating of shield are due to applications in oscillatory pumps, moving surface, metal detectors, power systems etc. The dimensionless problem is obtained via introducing the appropriate set of variables. The numerical outcomes are suggested by using the most interesting explicit finite difference scheme. The physical illustration for flow parameters is presented. Moreover, the aspect of physical quantities involving the flow are graphically reported. 相似文献
3.
成都经济生态区大气降尘中镉赋存形态的研究 总被引:3,自引:0,他引:3
采用Tessier连续提取法对成都经济生态区不同区域的24个大气降尘样中镉的赋存形态进行了研究。研究结果表明,大气降尘中的镉主要以残留态形态存在;各形态镉在总镉中所占百分比含量由大到小排列顺序依次是:残留态,碳酸盐结合态,交换态,铁锰结合态,有机结合态;交换态镉、碳酸盐结合态镉这两种具有较高生物有效性的形态镉在总镉中所占的平均百分比含量分别是6.420%和8.917%;铁锰氧化物结合态、有机结合态、残留态镉这三种形态镉生物有效性很低,分别在总镉中所占的平均百分比含量分别是3.419%、2.365%和78.907%。通过分析可得出,汽油和煤的燃烧以及工厂排放镉能加大城市大气降尘的镉污染。 相似文献
4.
5.
Hala A. Hejazi M. Ijaz Khan Ali Raza Kamel Smida Sami Ullah Khan Iskander Tlili 《印度化学会志》2022,99(7):100564
The interest of researchers towards the nanofluids is noticed in recent years due to leading applications in thermal systems and industrial framework. Referring to such motivations, current study explores the role of velocity slip effects for the mixed convection flow of nanofluid endorsed due to inclined surface. The Casson base fluid model for which the thermal impact needs to be improved. The analysis is observed when the role of velocity slip is important. The modeling of unsteady free convective flow problem yields partial differential system. The Atangana-Baleanu (AB) and Caputo-Fabrizio (CF) fractional operators are implemented in order to simulates the computation of problem. The graphical presentations are prepared in order to check the physical dynamic of parameters. 相似文献
6.
7.
8.
Delenclos S. Kolinsky C. Longuemart S. Hadj Sahraoui A. Buisine J. M. 《Journal of Thermal Analysis and Calorimetry》2002,70(2):549-558
The photopyroelectric (PPE) method is proposed as a sensitive technique to study a binary mixture of liquid crystals in a
contact preparation. The photothermal signal is generated while scanning the contact preparation. The crystal-smectic A, smectic
A-nematic, and nematic-isotropic interphase boundaries are detected. The displacement of these boundaries due to the variation
of the temperature is monitored. The study of these displacements allows us to draw the complete temperature-concentration
phase diagram of a binary mixtures.
This revised version was published online in August 2006 with corrections to the Cover Date. 相似文献
9.
Georgios G. Vogiatzis Evangelos Voyiatzis Doros N. Theodorou 《European Polymer Journal》2011,(4):699-712
The structure of a polystyrene matrix filled with tightly cross-linked polystyrene nanoparticles, forming an athermal nanocomposite system, is investigated by means of a Monte Carlo sampling formalism. The polymer chains are represented as random walks and the system is described through a coarse grained Hamiltonian. This approach is related to self-consistent-field theory but does not invoke a saddle point approximation and is suitable for treating large three-dimensional systems. The local structure of the polymer matrix in the vicinity of the nanoparticles is found to be different in many ways from that of the corresponding bulk, both at the segment and the chain level. The local polymer density profile near to the particle displays a maximum and the bonds develop considerable orientation parallel to the nanoparticle surface. The depletion layer thickness is also analyzed. The chains orient with their longest dimension parallel to the surface of the particles. Their intrinsic shape, as characterized by spans and principal moments of inertia, is found to be a strong function of position relative to the interface. The dispersion of many nanoparticles in the polymeric matrix leads to extension of the chains when their size is similar to the radius of the dispersed particles. 相似文献
10.
《Journal of Saudi Chemical Society》2022,26(3):101452
The new design of the photocatalytic reactor is crucial to study for improving compatibility and scaling up the operation. A compatible loop photocatalytic reactor has been designed and used for rhodamine B decomposition. The photocatalysts were either ZnO or Fe-ZnO immobilized onto fiberglass cloth. The ZnO catalyst exhibited high crystallinity with or without Fe as the dopant. The crystallite size increased with the presence of Fe in the lattices. Most of the crystal parameters matched the standard ZnO data, and the cluster size was comparable to most reported studies. Diffuse Reflectance Spectroscopy (DRS) analysis confirmed the photon absorption shifted to the visible light range. The Fe dopant decreased the ZnO bandgap, and SEM-EDS confirmed the catalysts adhered to the fiberglass surface. The volume, thickness of the substrate solution, and reaction temperature influenced the photocatalytic-degradation rate. The photocatalytic degradation rate was higher under sunlight than ultraviolet irradiation. The reaction rate was lower in the batch reactor than in the loop reactor. The photocatalytic reaction almost completely mineralized RhB and changed the red solution to colorless. The immobilized photocatalyst has been reused more than 50 times without significantly decreasing the catalytic activity. 相似文献
11.
采用密度泛函理论计算方法模拟了简单钴卟啉过氧中间体PCo-O2与环己烷C6H12的作用,分析了反应路径中各驻点能量和反应过渡态分子构型。研究结果表明,PCo-O2向底物环己烷夺氢的反应可以延正方向进行,二线态PCo-O2更具反应活性,反应过程中Co-O键得到加强,O-O键被削弱。依据理论计算结果,探讨了四苯基钴卟啉催化环己烷氧化生成环己醇和环己酮的反应机理,指出反应延Lyons高价金属氧代物机理生成环己醇,而反应循环中产生的烷基自由基可以延烷基过氧化过渡金属配合物反应机理进行生成环己酮。 相似文献
12.
The oil-in-water microemulsion copolymerizations of butyl acrylate and acrylonitrile initiated by water (ammonium peroxodisulfate, AP)—and oil (dibenzoyl peroxide, DBP)—soluble radical initiators were investigated. Copolymerizations show two distinct nonstationary rate regions. The maximum rate of polymerization is found to be proportional to the 0.48th and 0.65th power of the AP and DBP concentration, respectively. The rate per particle is found to be proportional to the 0.05th and 0.2nd power of the AP and DBP concentration, respectively. The rate of polymerization decreases with increasing the acrylonitrile concentration. The number of particle increases with increasing conversion up to 50–70%. The number-average molecular weight increases with conversion up to ca. 20% and then decreases. The number-average molecular weights were found to decrease with increasing the concentration of both initiator and acrylonitrile. The experimental results were discussed in terms of the water-phase polymerization, the chain-transfer and radical desorption events, the particle nucleation during the whole polymerization, and recruiting monomer and emulsifier from the free monomer-swollen emulsifier micelles. © 1996 John Wiley & Sons, Inc. 相似文献
13.
Determination of Herbicide Difenzoquat Methyl Sulfate in Citruses and Baby Juices by Kinetic‐Spectrophotometric Method and HPLC Method 下载免费PDF全文
Emilija T. Pecev‐Marinković Zora M. Grahovac Snežana S. Mitić Aleksandra N. Pavlović Ivana D. Rašić Mišić Milan N. Mitić 《中国化学会会志》2014,61(6):671-678
The purpose of this paper is to present a new kinetic‐spectrophotometric method which involve inexpensive equipment and which can be applied by all analyst who have to determine difenzoquate methyl sulfate (DFQ) residues in citruses and baby juices. The method is based on the inhibited effect of DFQ on the oxidation of sulfanile acid (SA) by hydrogen peroxide in phosphate buffer in presence Cu(II) ion. The reaction was monitored spectrophotometrically by measuring the increase in absorbance of the reaction product at 370 nm. The proposed inhibited method permits determination of DFQ over the range 0.36 to 1.80 μg/mL and 1.80 to 7.20 μg/mL, with quantification limit of 0.184 μg/mL. The relative standard deviations are 0.73‐2.90% for the concentration interval of DFQ 1.80‐0.36 μg/mL. The method was successfully applied to determination of DFQ residues in citruses and baby juices. The HPLC method is used to verify the results. The results obtained for the same samples by the two methods are quite comparable. 相似文献
14.
The electrochemistry of the bis(1,4,7-triazacyclodecane) cobalt(III) complex at a mercury electrode, HMDE, in aqueous Britton–Robinson buffer solutions was investigated using cyclic voltammetry, double-potential-step chronoamperometry and chronocoulometry. The cyclic voltammetric data were analyzed by digital simulation to confirm and to measure the heterogeneous and homogeneous parameters for the suggested electrode mechanism. Generally, the complex is electrochemically reduced giving rise to two cyclic voltammetric waves. The first wave is a diffusion-controlled reversible wave. It is assigned to the stable Co(III)/Co(II) redox couple. The second one is found to be irreversible and corresponding to a reduction of Co(II) to Co(I) species. The monovalent cobalt, highly unstable, is rapidly protonated, and then forms cobalt hydride. The hydride decomposes to hydrogen molecules and regenerates Co(II) species following a disproportionation pathway. The overall reduction mechanism is concluded to be an EECC kinetics. 相似文献
15.
试验了稻壳纤维作为柱层析介质的性能,并制成亲和层析介质经脂肪酶。结果表明稻壳纤维层析过程为化学物理混合吸附过程,亲和层析性能良好,层析可将脂肪酶纯化2倍,回收率达81.6%。适合较大规模层析分离。 相似文献
16.
17.
《Journal of separation science》2017,40(8):1724-1730
A portable chromatography device and a method were developed to analyze a gas mixture. The device comprises a chromatographic column for separating components of a sample of the gas mixture. It has an air pump coupled to the inlet of a chromatographic column for pumping air and an injector coupled to the inlet of chromatographic column for feeding the sample using the air as a carrier gas. A detector is arranged downstream from and coupled to the outlet of the chromatographic column. The detector is a nanostructure semiconductive microfiber. The device further comprises an evaluation unit arranged and configured to evaluate each detected component to determine the concentration. The designed portable system was used for simultaneous detection of amines. The possibility of applying dispersive liquid–liquid microextraction for the determination of analytes in trace levels is demonstrated. The reproducibility of this method is acceptable, and good standard deviations were obtained. The relative standard deviation value is less than 6% for all analytes. Finally, the method was successfully applied to the extraction and determination of analytes in water samples. 相似文献
18.
The kinetics of reaction of bromo-epoxy resin with oleic acid in the presence of dimethylbenzylamine catalyst was studied. The reaction is a zero order reaction with respect to oleic acid, first order with respect to epoxy group and 0. 74 order with respect to dimethylbenzylamine. The reaction rate constants at various temperatures and activation energy were determined. The mechanism of this reaction was discussed. Keywords Tetrabromobisphenol-A, Bromo-epoxy resin, Oleic acid kinetics, Reaction mechanism 相似文献
19.
Yan QZ Zhang WF Lu GD Su XT Ge CC 《Chemistry (Weinheim an der Bergstrasse, Germany)》2006,12(12):3303-3309
The frontal polymerization process was used to produce superabsorbent hydrogels based on acrylic acid monomers grafted onto starch. Using a simple test tube which was nonadiabatic and permitted contact with air, the effects of initial temperature and tube size on the propagating front of grafting copolymerization and the properties of hydrogels were explored. The unrestricted access of the reaction mixture to oxygen delayed the formation of self-propagating polymerization front. The ignition time was markedly lengthened with the increasing of tube size attributed to the formation of large amounts of peroxy radicals. The front velocity dependence on initial temperature could be fit to an Arrhenius function with the average apparent activation energy of 24 kJ mol(-1), and on tube size to a function of higher order. The increase of the initial temperature increased the front temperature, which lead to more soluble oligomers and higher degree of crosslinking. The interplay of two opposite effects of oligomer and crosslinking determined the sol and gel content. An increase in tube size had two effects on the propagating front. One was to reduce heat loss. The other effect was to increase the number of escaping gas bubbles. The combined action of the two effects resulted in a maximum value of front temperature, an increase in sol content and a reduction in gel content with tube size. The highest swelling capacity of hydrogels was obtained when the initial temperature or tube size favored a formation of porous microstructure of hydrogels. 相似文献