Synthesis of peroxide‐curable butyl rubber via suzuki–miyaura coupling of halogenated butyl rubber with 4‐vinylphenylboronic acid

The Suzuki–Miyaura coupling reaction of brominated butyl rubber (BIIR) and/or chlorinated butyl rubber with a mixture of 4‐vinylphenylboronic acid and phenylboronic acid was carried out in THF under various conditions using a di‐μ‐chlorobis [5‐hydroxy‐2‐[1‐(hydroxyimino‐κN)ethyl]phenylκC] palladium(II) dimer, which is a type of cyclopalladated complex, as a catalyst. When BIIR and a small amount (Pd/Br ≈ 1/1000) of complex were used as the substrate and catalyst, respectively, a 4‐vinylphenyl and phenyl group could be introduced to butyl rubber in a high yield. Isomerization of the exo carbon–carbon double bond in BIIR was observed during the coupling reaction to give a cis and trans endo structure. The peroxide curing behavior of the resulting polymer at 170 °C indicated that the polymer could be cured by dicumyl peroxide, and the maximum torque of the resulting material, which reflects the crosslink density, was controllable by the composition of the boronic acids used. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Facile One‐Pot Synthesis of 2‐Aryl‐substituted Nitriles and 2‐Aryl‐3‐keto Nitriles via Benzyne Reaction

2‐Aryl‐substituted nitriles were prepared in good to excellent yields in a one‐pot reaction by the reaction of benzyne, generated using neutral conditions from (phenyl)[o‐(trimethylsilyl)‐phenyl]iodonium triflate, and 2‐lithionitriles. 3‐Keto nitriles substituted at the 2‐position were obtained in good yields when these reactions were trapped with acid chlorides. The mechanism of the benzyne reaction in terms of a N‐lithiobenzocyclobutanimine intermediate is discussed.     

Design,synthesis, in silico analysis with PPAR‐γ receptor and study of non‐covalent interactions in unsymmetrical heterocyclic/phenyl fleximer

This work deals with the design, synthesis, in silico analysis, crystallization, and the interpretation 2‐cyano‐3‐{4‐[2‐(phthalimid‐nyl)‐propoxy]‐phenyl}‐acrylic acid ethyl ester (7). Analog 7 is designed based on rosiglitazone. The quantitative analysis of Compound 7 has been performed through single‐crystal X‐Ray Diffraction (XRD) and Hirshfeld surface analysis. Fleximer 7 has studied the role of flexibility in non‐covalent interactions and binding affinity with PPAR‐γ receptors. Both phthalimide ring and phenyl rings are linked with propylene linker. 2‐cyano‐3‐{4‐[2‐(phthalimid‐nyl)‐propoxy]‐phenyl}‐acrylic acid ethyl ester has Z = 8 in the crystal packing and stabilized by intermolecular non‐covalent interactions like C? H…O, C? H…N, C? H…л, and л…л, and so forth.     

腐植酸负载Pd/Ni双金属催化剂对Heck反应催化性能的研究

制备了腐植酸负载Pd/Ni双金属催化剂, 该催化剂能够成功催化溴苯与丙烯酸、苯乙烯等乙烯基化合物的Heck反应, 产率均在85%以上; 催化剂能够不同程度地重复使用, 在催化溴苯与丙烯酸反应中, 催化剂重复使用3次后仍可得到42.9%的产率, 而在催化溴苯与苯乙烯反应中, 催化剂重复使用7次后也可得到26.7%的产率; 并且对不同取代基芳基卤与丙烯酸的反应也有很好的催化活性.     

碳负载钯催化剂对Heck反应的催化性能

研究了钯碳催化剂对芳基卤和取代芳基卤与丙烯酸和苯乙烯的Heck芳基化反应的催化性能.结果表明:在反应温度为80℃、反应时间为8h、四丁基溴化铵(TBABr)作为溶剂和三丁胺作为碱的条件下,钯碳催化剂对不同取代芳基卤与丙烯酸和苯乙烯的Heck芳基化反应具有良好的催化性能,产物收率在80%以上.     

Preparation of phenyl‐modified natural rubber in latex stage

Phenyl‐modified natural rubber was prepared in latex stage by bromination of deproteinized natural rubber followed by Suzuki‐Miyaura cross‐coupling reaction. First, the bromination of natural rubber was carried out using N‐bromosuccinimide in latex stage. The bromine atom content increased as amount of N‐bromosuccinimide increased. Second, the allylic bromine atom was replaced with a phenyl group using phenyl boronic acid in the presence of a palladium catalyst, according to the Suzuki‐Miyaura cross‐coupling reaction in latex stage. The resulting products were characterized by nuclear magnetic resonance (NMR) spectroscopy. Signal at 7.13 ppm was assigned to the phenyl group of the product, while signals at 3.98, 4.14, and 4.44 ppm were assigned to the remaining allylic brominated cis‐1,4‐isoprene units. The estimated phenyl group content and the conversion of the Suzuki‐Miyaura cross‐coupling reaction were 1.32 and 23.7 mol%, respectively. Glass transition temperature (T_g) of deproteinized natural rubber increased from ?62°C to ?46.7°C, when the phenyl group was introduced into the rubber.     

Synthesis of phenyl azides bearing (E)-2-halovinyl group

A series of phenyl azides bearing (E)-2-halovinyl groups were synthesized in high yields by treatment of (E)-3-(4-azidophenyl)- and (E)-3-(2-azidophenyl)acrylic acid with N-halosuccinimide in the presence of LiOAc. (E)-4-(2-bromovinyl) phenyl azide, one of the synthesized intermediates, was selected to transform to a diverse range of phenyl-1, 2, 3-triazoles bearing (E)-4-(2-bromovinyl) groups by Cu(I)-catalyzed 1,3-dipolar cycloaddition reaction.     

Preparation and properties of phenyl‐modified natural rubber

We prepared phenyl‐modified natural rubber using a two‐step process. In the first step, natural rubber was brominated using N‐bromosuccinimide in a dichloromethane solution of natural rubber. The amount of N‐bromosuccinimide controlled the bromine content. In the second step, a Suzuki–Miyaura cross‐coupling reaction of the brominated natural rubber with phenyl boronic acid in the presence of a palladium catalyst replaced the bromine atoms with phenyl groups. ¹H‐nuclear magnetic resonance and ¹³C‐nuclear magnetic resonance measurements characterized the products. The signals around 7 ppm in the ¹H‐nuclear magnetic resonance spectra of the products were assigned to the phenyl protons, and based on the assigned signals, the estimated conversion of the cross‐coupling reaction under mild conditions was more than 70 mol%. The amount of phenyl groups present affected both the loss tangent and the glass transition temperature of natural rubber, which increases from ?62°C to ?30°C. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of phenylacetylene containing 1,2,3-triazole group

Bromination of (E)-1-[4-(2-carboxy-vinyl)phenyl]-[1,2,3]triazole-4-carboxylic acid ethyl ester, which was synthesized in 90% yield by a Huisgen-type [3 + 2]-cycloaddition reaction between 3-(4-azidophenyl) acrylic acid and ethyl propiolate, in CHCl₃ followed by a debrominative decarboxylation reaction with Et₃N in DMF under microwave irradiation condition afforded stereoselective (Z)-1-(4-(2-bromovinyl)phenyl)-1,2,3-triazole-4-carboxylic acid ethyl ester in 94% yield. Treatment of (Z)-1-(4-(2-bromovinyl)phenyl)-1,2,3-triazole-4-carboxylic acid ethyl ester with EtONa in DMF afforded 1-(4-ethynylphenyl)-1,2,3-triazole-4-carboxylic acid ethyl ester in a yield of 90%.     

A Silicon-based Imidazolium Ionic Liquid Iodide Source for Dye-Sensitized Solar Cells

Room temperature molten salt 1‐methyl‐3‐(trimethylsilyl)methyl‐imidazolium iodide (MSII) was used for iodide sources in dye‐sensitized solar cells with an organic sensitizer 2‐cyano‐3‐[5‐[4‐[3‐[4‐(4‐(N,N‐bis(4‐methoxyphenyl)amino)phenyl)phenyl]‐2,5‐di‐n‐butyl‐pyrrolo[3,4‐c]pyrrole‐1,4‐dione]phenyl]furan‐2‐yl] acrylic acid (DPP‐I) as light harvester. With an optimized electrolyte (MSII:I₂:BI:GuNCS?24:2:2:0.4, BI and GuCNS are short for benzimidazole and guanidine thiocyanate, respectively), photovoltaic parameters (J_sc, V_oc, and ff) of device are 8.97 mA·cm^?2, 600 mV and 0.61, respectively, yielding a maximum overall photo‐to‐energy conversion ef?ciency (η) of 3.23%. And then the charge‐transfer mechanism of devices was deeply analyzed with electrochemical impedance spectroscopy (EIS) in the dark.     

Facile and Selective Synthesis of 4‐Methyl‐ and 4‐Phenylthiosemicarbazide (=N‐Methyl‐ and N‐Phenylhydrazinecarbothioamide) Derivatives of Benzil (=1,2‐Diphenylethane‐1,2‐dione)

A selective synthesis of 4‐methylthiosemicarbazide (=N‐methylhydrazinecarbothioamide; 4a ) derivatives by reaction with benzil (=1,2‐diphenylethane‐1,2‐dione; 3 ) is described. The reaction conditions determined the condensation product formed. The most important factor was the acid used: in the presence of conc. HCl solution, the open‐chain 2 : 1 compound 1a was exclusively obtained, whereas in the presence of 2M HCl, the cyclic 1 : 1 condensation product 2a was formed. The alcohol used, the presence of H₂O, and the time of heating were additional crucial factors. The new cyclic compound 2a with a MeO group was exclusively formed when working under high‐dilution conditions. The reaction with the 4‐phenyl derivative 4b gave new cyclic compounds as the major products under all conditions used (Scheme).     

Highly Efficient Pd/C-Catalyzed Suzuki Coupling Reaction of p-（un）Substituted Phenyl Halide with （p-Substituted phenyl） Boronic Acid

A highly efficient Pd/C-catalyzed ligandless, heterogeneous Suzuki reaction of p-（un）substituted phenyl halide with （p-substituted phenyl）boronic acid in DMF/H2O solvent in a short reaction time （0.5 h） at 75 ℃ was developed. The key for such a catalytic system was the addition of 1 equivalent of tetrabutylammonium bromide. A wide variety of substituents can be tolerated and high yields of cross coupling products were achieved. The palladium catalyst can be easily recovered and reused without significantly decreasing its efficiency.     

Modular amino acid amide chiral ligands for enantioselective addition of diethylzinc to aromatic aldehydes

Enantioselective addition of diethylzinc to a series of aromatic aldehydes was developed using a modular amino acid amide chiral ligand (2S)‐3‐phenyl‐N‐((R)‐1‐phenyl‐ethyl)‐2‐(tosylamino)propanamide without using titanium complex. The catalytic system employing 10 mol% of 1g was found to promote the addition of diethylzinc (ZnEt₂) to a wide range of aromatic aldehydes with electron‐donating and electron‐withdrawing substituents, giving up to 82% ee of the corresponding secondary alcohol under mild conditions. Copyright © 2011 John Wiley & Sons, Ltd.     

Imidazole‐coordinated monodentate NHC–Pd(II) complex derived from proline and its application to the coupling reaction of arylboronic acids with carboxylic acid anhydrides in water at room temperature

Cleavage of a C N bond of imidazolium salt derived from N‐phenyl‐substituted proline was observed in this laboratory. A novel imidazole‐coordinated monodentate NHC–Pd(II) complex 5 was obtained as the sole product in good yield in the reaction of imidazolium salt 4 with Pd(OAc)₂ in refluxing THF. The structure of complex 5 was determined unambiguously by an X‐ray diffraction. The complex was found to be a good catalyst in the cross‐coupling reaction of arylboronic acids with carboxylic acid anhydrides in water at room temperature. Copyright © 2011 John Wiley & Sons, Ltd.     

Condition‐Directable Reaction: Regio‐ and Stereoselective Elimination of 2,3‐Dibromo‐2‐methylpropyl Phenyl Sulfone via Base‐solvent Selection

Diversity‐oriented organic synthesis is an important approach for combinatorial chemistry and drug discovery. An example of this approach is selective elimination of 2,3‐dibromo‐2‐methylpropyl phenyl sulfone 5 to potentially useful vinyl sulfones 6 E/Z and vinyl bromides 7 E/Z , which is achieved by choosing reaction conditions.     

Divergent synthesis of dendrimer‐like macromolecules through a combination of atom transfer radical polymerization and click reaction

This article describes a divergent strategy to prepare dendrimer‐like macromolecules from vinyl monomers through a combination of atom transfer radical polymerization (ATRP) and click reaction. Firstly, star‐shaped polystyrene (PS) with three arms was prepared through ATRP of styrene starting from a three‐arm initiator. Next, the terminal bromides of the star‐shaped PS were substituted with azido groups. Afterwards, the azido‐terminated star‐shaped PS was reacted with propargyl 2,2‐bis((2′‐bromo‐2′‐methylpropanoyloxy)methyl)propionate (PBMP) via click reaction. Star‐shaped PS with six terminal bromide groups was afforded and served as the initiator for the polymerization of styrene to afford the second‐generation dendrimer‐like PS. Iterative process of the aforementioned sequence of reactions could allow the preparation of the third‐generation dendrimer‐like PS. When the second‐generation dendrimer‐like PS with 12 bromide groups used as an initiator for the polymerization of tert‐butyl acrylate, the third‐generation dendrimer‐like block copolymer with a PS core and a poly (tert‐butyl acrylate) (PtBA) corona was afforded. Subsequently PtBA segments were selectively hydrolyzed with hydrochloric acid, resulting an amphiphilic branched copolymer with inner dendritic PS and outer linear poly(acrylic acid) (PAA). Following the same polymerization procedures, the dendrimer‐like PS and PS‐block‐PtBA copolymers of second generation originating from six‐arm initiator were also synthesized. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3330–3341, 2007     

Convenient Synthesis of Some Novel Pyridazinone‐Bearing Triazole Moieties

The chemoselective reactions of 2‐(5‐mercapto‐4‐phenyl‐4H‐[1,2,4]triazol‐3‐ylmethyl)‐6‐p‐tolyl‐4,5‐dihydro‐2H‐pyridazin‐3‐one ( 3 ) with different electrophiles were evaluated. Triazole 3 reacted with alkyl halides in the presence of triethylamine in alcohol to give the corresponding S‐substituted derivatives. On the basis of S‐chemoselective reactions of triazole 3 , a series of amino acid 10a – d and dipeptide derivatives 12a – d were prepared via azide coupling of the corresponding hydrazides 9 and 15 with amino acid ester hydrochlorides, respectively. N‐Substituted triazoles 6a – c or 7a – d attached to pyridazin‐3‐one moiety were successfully formed by the reaction of 3 with activated acrylic acid derivatives or with amines. Antibacterial activities of the synthesized derivatives were investigated through correlation with Escherichia coli FabH inhibitory activities using molecular modeling docking software. The antimicrobial activity of synthesized compounds was evaluated, showing best inhibition zone for N‐substituted carboxylic acid 5a and N‐substituted nitrile 5c parallel to the molecular modeling studies.     

Synthesis of chitosan derivatives supported palladium complexes and their catalytic behavior in the Heck reaction

Two kinds of chitosan derivatives, crosslinked chitosan and crosslinked chitosan condense with salilylaldehyde, supported palladium complexes (CL‐CTS‐Pd and CL‐S‐CTS‐Pd) were synthesized and characterized by X‐ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), differential thermal analysis (DTA), etc. These complexes are efficient catalysts for the Heck reaction under atmospheric conditions and can be easily recovered and reused. The detailed studies show that the catalyst CL‐S‐CTS‐Pd is much more efficient than CL‐CTS‐Pd under the same conditions. CL‐S‐CTS‐Pd keeps its catalytic activity in the Heck reaction of acrylic acid with iodobenzene even at a low temperature (60°C) or with tiny amounts of the catalyst (0.05 mol%Pd). Yields of making cinnamic acid were even as high as 75.3% in the Heck reaction of acrylic acid with iodobenzene using CL‐S‐CTS‐Pd that was recovered 10 times. Copyright © 2005 John Wiley & Sons, Ltd.     

Melamine Trisulfunic Acid: An Efficient and Recyclable Solid Acid Catalyst for the Synthesis of 4,4′‐(Arylmethylene)‐bis‐(1H‐pyrazol‐5‐ols)

Melamine trisulfunic acid is employed as a recyclable catalyst for the condensation reaction of aromatic aldehydes with 3‐methyl‐l‐phenyl‐2‐pyrazolin‐5‐one. This condensation reaction was performed in ethanol under refluxing conditions giving 4,4′‐(arylmethylene)‐bis‐(3‐methyl‐1‐phenyl‐1H‐pyrazol‐5‐ols) in 80‐96% yields.     

Preparation of 2‐phenyl‐2‐hydroxymethyl‐4‐oxo‐1,2,3,4‐tetrahydroquinazoline and 2‐methyl‐4‐oxo‐3,4‐dihydroquinazoline derivatives formation

The cyclization of phenacyl anthranilate has been studied with the aim to develop the synthesis of 2‐(2′‐aminophenyl)‐4‐phenyloxazole. However, a different course of the reaction than expected was observed. 2‐Phenyl‐2‐hydroxymethyl‐4‐oxo‐1,2,3,4‐tetrahydroquinazoline ( 3a ) was formed by the reaction of phenacyl anthranilate ( 2 ) with ammonium acetate under various conditions. 3‐Hydroxy‐2‐phenyl‐4(1H)‐quinolinone ( 4 ) arose by heating compound 3a in acetic acid. The same compound was obtained by melting compound 3a , but the yield was lower. Different types of products resulted in the reaction of compound 3a with acetic anhydride. Under mild conditions acetylated products 2‐acetoxymethyl‐2‐phenyl‐4‐oxo‐1,2,3,4‐tetrahydroquinazoline ( 7a ) and 2‐acetoxymethyl‐3‐acetyl‐2‐phenyl‐4‐oxo‐1,2,3,4‐tetrahydroquinazoline ( 8 ) were prepared. If the reaction was carried out under reflux of the reaction mixture, molecular rearrangement took place to give cis and trans 2‐methyl‐4‐oxo‐3‐(1‐phenyl‐2‐acetoxy)vinyl‐3,4‐dihydroquinazolines ( 9a and 9b ). All prepared compounds have been characterised by their ¹H, ¹³C and ¹⁵N NMR spectra, IR spectra and MS.