Reduced Species （HSO2^-, SO2^·-） Promoted One-Pot Efficient Synthesis of Phenyl Alkyl Selenides

Reduced species （HSO2^-, SO2^·-） promoted one-pot synthesis of phenyl alkyl selenides has been developed. This synthetic method was achieved by reactions of diphenyl diselenide with alkyl halides at room temperature. It is noteworthy that the reactions were operated under mild reaction conditions, required short time, and got good resuits. A single electron transfer reaction mechanism was proposed for the reaction.     

Cyanogen Bromide Promoted Thiol Dimerization

The synthesis of alkyl thiocyanates by the reaction of thiols with cyanogen chloride has been known,¹ although it is generally supersede by the more convenient displacement of alkyl halides with alkali thio-cyanates.² We wish to describe the behavior of sodium thiolates toward cyanogen bromide.     

Zinc‐Catalyzed Borylation of Primary,Secondary and Tertiary Alkyl Halides with Alkoxy Diboron Reagents at Room Temperature

A new catalytic system based on a Zn^II NHC precursor has been developed for the cross‐coupling reaction of alkyl halides with diboron reagents, which represents a novel use of a Group XII catalyst for C? X borylation. This approach gives borylations of unactivated primary, secondary, and tertiary alkyl halides at room temperature to furnish alkyl boronates, with good functional‐group compatibility, under mild conditions. Preliminary mechanistic investigations demonstrated that this borylation reaction seems to involve one‐electron processes.     

Single electron-transfer as rate-determining step in an aliphatic nucleophilic substitution

The rate of the reaction between the anion of 1,4-dihydro-4-methoxycarbonyl-1-methylpyridine (1⁻ and sterically hindered alkyl halides, and between the perylene dianion (Pe²⁻) and t-butyl chloride and sec-butyl bromide has been measured by electrochemical techniques. The rate was found to be close to the rate of single electron-transfer (SET) from anion radicals (A⨪) with the same standard potential as 1^•/1⁻, resp. Pe^⨪/Pe²⁻ to the corresponding alkyl halides. The kinetic results strongly suggest that a SET mechanism is the rate-determining step in these nucleophilic substitutions.     

A green and highly efficient alkylation of thiols in water

An environmentally benign and efficient process for the preparation of thioethers was developed by simple and practical reactions of alkyl halides and thiols in water in the presence of K₂CO₃ or Et₃N in very high yields. The reaction of aryl, alkyl, aliphatic and hindered thiols with various alkyl halides gave the corresponding products with significant advantages such as high conversions, short reaction time, mild reaction conditions, and low cost, simple workup with good to quantitative yields.     

An efficient strategy for N-alkylation of benzimidazoles/imidazoles in SDS-aqueous basic medium and N-alkylation induced ring opening of benzimidazoles

A sustainable route for the N-1 alkylation of imidazole and benzimidazole derivatives has been developed under volatile organic solvent free condition in alkaline water-SDS system. Incorporation of SDS in the reaction medium enhances the reaction rate by suppressing the solubility issue that arises for different substrates. This method provides high yield of the alkylated product in a shorter reaction time. For reactive alkyl halides reaction proceeds at ambient temperature whereas in the cases of less reactive alkyl halides require 55–60?°C to complete alkylation process. N-alkylation induced ring opening of the heterocyclic ring in benzimidazole derivatives to multifunctional aromatic compounds were noticed at 60?°C when more than two equivalents of alkyl halide was used.     

Electrochemical NiH-Catalyzed C(sp3)−C(sp3) Coupling of Alkyl Halides and Alkyl Alkenes

Herein, an electrochemically driven NiH-catalyzed reductive coupling of alkyl halides and alkyl alkenes for the construction of Csp³−Csp³ bonds is firstly reported. Notably, alkyl halides serve dual function as coupling substrates and as hydrogen sources to generate NiH species under electrochemical conditions. The tunable nature of this reaction is realized by introducing an intramolecular coordinating group to the substrate, where the product can be easily adjusted to give the desired branched products. The method proceeds under mild conditions, exhibits a broad substrate scope, and affords moderate to excellent yields with over 70 examples, including late-stage modification of natural products and drug derivatives. Mechanistic insights offer evidence for an electrochemically driven coupling process. The sp³-carbon-halogen bonds can be activated through single electron transfer (SET) by the nickel catalyst in its low valence state, generated by cathodic reduction, and the generation of NiH species from alkyl halides is pivotal to this transformation.     

Photocatalyzed Aminomethylation of Alkyl Halides Enabled by Sterically Hindered N-Substituents

The catalytic C(sp³)−C(sp³) coupling of alkyl halides and tertiary amines offers a promising tool for the rapid decoration of amine skeletons. However, this approach has not been well established, partially due to the challenges in precisely distinguishing and controlling the reactivity of amine-coupling partners and their product homologues. Herein, we developed a metal-free photocatalytic system for the aminomethylation of alkyl halides through radical-involved C(sp³)−C(sp³) bond formation, allowing for the synthesis of sterically congested tertiary amines that are of interest in organic synthesis but not easily prepared by other methods. Mechanistic studies disclosed that sterically hindered N-substituents are key to activate the amine coupling partners by tuning their redox potentials to drive the reaction forward.     

Alkylation of acylmetalates with alkyl halides to prepare Fischer carbene complexes: an improved protocol

Alkoxy Fischer carbene complexes have been synthesized by alkylation of lithium acylmetalates with alkyl halides in the presence of catalytic amount (5-10 mol %) of n-tetrabutylammonium bromide (n-Bu₄NBr) restricting the temperature below 55 °C to minimize decomposition of the product. The reaction occurs in a biphasic condition involving water and alkyl halide. The effect of cesium on this alkylation reaction has been studied. The presence of a radical quencher, di-tert-butyl phenol, neither affects the yield nor leads to the formation of dimer of di-tert-butyl phenol, which rules out the possibility of radical pathway mechanism. The kinetic study and the ¹H NMR spectra of products suggest an S_N2 pathway particularly involving alkyl halides.     

Preparation of N-Alkylphtalimides Assisted by Solid-Liquid Phase-Transfer Systems

N-Alkylphtalimides are intermediates in the synthesis of primary amines¹ and are generally prepared from potassium phtalimide and alkyl halides in anhydrous polar aprotic solvents such as dimethylformamide.² Recently, N-alkylation of potassium phtalimide has been achieved from alkyl halides and methanesulfonates in toluene in the presence of hexadecyltributylphosphonium bromide³.     

A convenient method for the preparation of primary amines using tritylamine

A simple method for the preparation of primary amines by treating N-tritylamines with trifluoroacetic acid has been established. The N-tritylamines were prepared by the reaction of alkyl halides or alkyl p-toluenesulfonates with tritylamine, or by the reaction of alkyl bromides with lithium tritylamide.     

Nickel‐Catalyzed Reductive Allylation of Tertiary Alkyl Halides with Allylic Carbonates

The construction of all C(sp³) quaternary centers has been successfully achieved under Ni‐catalyzed cross‐electrophile coupling of allylic carbonates with unactivated tertiary alkyl halides. For allylic carbonates bearing C1 or C3 substituents, the reaction affords excellent regioselectivity through the addition of alkyl groups to the unsubstituted allylic carbon terminus. The allylic alkylation method also exhibits excellent functional‐group compatibility, and delivers the products with high E selectivity.     

A Rapid and Facile Esterification of Na-Carboxylates with Alkyl Halides Promoted by the Synergy of the Combined Use of DMSO and an Ionic Liquid Under Ambient Conditions

The synergy of the combined use of DMSO and an ionic liquid viz. (bbim)⁺Br^? has brought about a rapid and efficient esterification of sodium carboxylates with acyl and alkyl halides under ambient conditions in excellent isolated yields (90–95%) in short reaction times (12–40 min).     

Synthetic approaches to trialkyl(ferrocenylmethyl)ammonium salts as cationic templates for the preparation of ferromagnets on the basis of bimetal oxalates

Trialkyl(ferrocenylmethyl)ammonium salts and their 2-substituted analogs designed for the preparation of molecular ferromagnetics based on bimetallic oxalates were synthesized using classical alkylation of dialkylaminomethylferrocenes by alkyl halides and nucleophilic substitution reaction of 2-substituted dimethylaminomethylferrocene methiodides with trialkylamines. In the case of salts with electron-donating substituents in position 2, only the latter of the two proposed routes is applicable because N-alkylation with alkyl halides is accompanied by competing ferrocenylmethylation of the starting amine. On the contrary, the salts with electron-withdrawing 2-substituents should be prepared preferably by the reaction of amines with alkyl halides, while nucleophilic trialkylamination of methiodides is complicated by deprotonation induced by bases.     

Indium-mediated cleavage of diphenyl diselenide and diphenyl disulfide: efficient one-pot synthesis of unsymmetrical diorganyl selenides, sulfides, and selenoesters

A convenient and efficient method was developed for the synthesis of alkyl phenyl selenides, sulfides, and selenoesters in one-pot reaction by using indium metal. The reaction showed the selectivity for tert-alkyl, benzylic, and allylic halides over primary and secondary alkyl halides. For the reaction of primary and secondary alkyl iodides and bromides, the yields of selenides were improved by the addition of a catalytic amount of iodine.     

Synthese et caracterisation par RMN 1H d'alkyl(aryl)ferriporphyrines a liaison σ metalcarbone

A series of alkyl(aryl)iron(III) porphyrins with a metalcarbon σ bond has been prepared either by action of an organomagnesium compound on iron(III) chloride porphyrins or by oxidative addition of alkyl halides to iron(I) porphyrins. ¹H NMR data have been used to characterize the products obtained.     

Copper‐Catalyzed Enantioconvergent Cross‐Coupling of Racemic Alkyl Bromides with Azole C(sp2)−H Bonds

The development of enantioconvergent cross‐coupling of racemic alkyl halides directly with heteroarene C(sp²)?H bonds has been impeded by the use of a base at elevated temperature that leads to racemization. We herein report a copper(I)/cinchona‐alkaloid‐derived N,N,P‐ligand catalytic system that enables oxidative addition with racemic alkyl bromides under mild conditions. Thus, coupling with azole C(sp²)?H bonds has been achieved in high enantioselectivity, affording a number of potentially useful α‐chiral alkylated azoles, such as 1,3,4‐oxadiazoles, oxazoles, and benzo[d]oxazoles as well as 1,3,4‐triazoles, for drug discovery. Mechanistic experiments indicated facile deprotonation of an azole C(sp²)?H bond and the involvement of alkyl radical species under the reaction conditions.     

Synthesis of 1,3-Dialkylimidazolium and 1,3-Dialkylbenzimidazolium Salts

A number of N-alkylimidazoles and N-alkylbenzimidazoles were synthesized by reactions of imidazole and benzimidazole with alkyl halides. The reaction rate increases by a factor of 2 to 3 under conditions of microwave activation. Subsequent treatment of the resulting N-alkylazoles with alkyl halides afforded the corresponding 1,3-dialkylimidazolium and 1,3-dialkylbenzimidazolium halides.     

Selective Monoarylation of Primary Amines Using the Pd‐PEPPSI‐IPentCl Precatalyst

A single set of reaction conditions for the palladium‐catalyzed amination of a wide variety of (hetero)aryl halides using primary alkyl amines has been developed. By combining the exceptionally high reactivity of the Pd‐PEPPSI‐IPent^Cl catalyst (PEPPSI=pyridine enhanced precatalyst preparation, stabilization, and initiation) with the soluble and nonaggressive sodium salt of BHT (BHT=2,6‐di‐tert‐butyl‐hydroxytoluene), both six‐ and five‐membered (hetero)aryl halides undergo efficient and selective amination.     

Nickel‐Catalyzed Cross‐Coupling of Alkyl Zinc Halides for the Formation of C(sp2)?C(sp3) Bonds: Scope and Mechanism

Optimal conditions for a general Ni‐catalysed Negishi cross‐coupling of alkyl zinc halides with aryl, heteroaryl and alkenyl halides have been determined. These conditions allow the reaction to take place smoothly, with low catalyst loading, and in the presence of a wide variety of functional groups to afford products in good yields at room temperature. DFT studies on the mechanism support the occurrence of a catalytic cycle involving transmetalation of the alkyl zinc halide to Ni^I followed by oxidative addition of the haloarene and C? C reductive elimination.