Mild and Efficient Deoxygenation of Sulfoxides to Sulfides Using HfCl4/KBH4 System

HfCl₄/KBH₄ was found to be a facile, efficient, convenient, and chemoselective system for the deoxygenation of dialkyl, diaryl, and aryl alkyl sulfoxides, especially for the reduction of dibenzyl sulfoxide to the corresponding sulfides under mild conditions. In addition, the HfCl₄/KBH₄ system could be used in reduction of some other sulfur-bearing substrates to the corresponding sulfides, such as 2,2′-dibenzothiazolyl disulfide, but this reducing system could not reduce sulfolane, diphenyl sulfone, p-toluenesulfonic acid, and p-toluenesulfonyl chloride to their corresponding thiophenols.     

A practical and efficient procedure for reduction of carboxylic acids and their derivatives: use of KBH4-MgCl2

The use of KBH₄-MgCl₂ to reduce carboxylic acids and their derivatives to the corresponding alcohols or the respective reduced products is described. Methyl (S)-3,4-O-isopropylidene-3,4-dihydroxy butanoate 2 used as a reference substrate was reduced with KBH₄ and MgCl₂ in 1:1 mol ratio to (S)-1,2-O-isopropylidene-1,2,4-butanetriol 1.     

CeCl3-Catalyzed Reduction of Methyl Esters of Carboxylic Acids to Corresponding Alcohols with Sodium Borohydride

A wide range of methyl esters, including esters of aromatic carboxylic acids, alkenyl carboxylic acids, aliphatic carboxylic acids, and protected amino acids, were reduced to the corresponding alcohols with NaBH₄ in ethanol in the presence of a catalytic amount of CeCl₃. The reaction was completed within 24 h at ambient temperature and showed high functional group compatibility and chemoselectivity. With esters containing nitro, methoxyl, halogen, alkenyl, and protected amino functionalities, only the ester group was reduced. The alcohols were isolated after evaporation of the solvent and routine aqueous workup in good yields (75–95%).     

Determination of C1−C4 fatty acids as p-bromophenacyl esters using glass-capillary gas chromatography and electron-capture detection

Summary A method for the determination of low relative molecular mass carboxylic acids (C₁–C₄) in water is reported. The acids are converted to p-bromophenacyl esters prior to a glass-capillary gas chromatographic separation. By utilizing electron-caputre detection the detectability is substantially improved compared to flame-ionization detection. A comparison of three different ways to treat the water samples and to produce the derivatives is made. It is shown that the , p-dibromoacetophenone reagent decomposes to a small extent which limits the utility of the reagent. Nevertheless a detection limit for formic acid of approximately 2.5 mgl^–1 is obtained. The method is applied to the determination of formic and acetic acids in a paper kraft water sample.     

Synthesis,characterization of SiO2 supported-industrial phosphoric acid catalyst for hydrolysis of NaBH4 solution

Abstract

Tunisian industrial phosphoric acid H₃PO₄ was supported on silica gel SiO₂ (SIPA) to catalyze the hydrolysis reaction of aqueous alkaline sodium borohydride (NaBH₄). The SiO₂ was produced from purified quartz sand using alkali fusion-acidification chemical process. The BET surface area results indicate that the prepared silica gel could reach a specific surface area up to 585 m²/g. The addition of PO₃H₂ functional groups resulted in an increase of surface acidity of SiO₂ catalyst as shown by FT-IR and DTA-DTG spectra. The total acidity of SIPA catalyst was determined by titration to be 2.8?mmol H⁺/g. SEM/EDS maps reveal the distribution of heavy metals on the silica surface. The effect of supported PO₃H₂ functional groups and heavy metals on the NaBH₄ hydrolysis reaction was studied for different ratios of SIPA catalyst to NaBH₄. The sample 12SIPA/NaBH₄ leads to a very high hydrogen generation rate (up to 90%). The activation energy of hydrogen generation by NaBH₄ hydrolysis was 25.7?kJ mol^?1.     

An expedient route for the reduction of carboxylic acids to alcohols employing 1-propanephosphonic acid cyclic anhydride as acid activator

A simple and efficient method for the synthesis of alcohols from the corresponding carboxylic acids is described. Activation of carboxylic acid with 1-propanephosphonic acid cyclic anhydride (T3P) and subsequent reduction using NaBH₄ yield the alcohol in excellent yields with good purity. Reduction of several alkyl/aryl carboxylic acids and N^α-protected amino acids/peptide acids as well as N^β-protected amino acids was successfully carried out to obtain corresponding alcohols in good yields. All the products were fully characterized by ¹H NMR and mass spectral analyses. The procedure is mild, simple and the isolation of the products is easy.     

A convenient method to reduce hydroxyl-substituted aromatic carboxylic acid with NaBH4/Me2SO4/B(OMe)3

The reduction of hydroxyl-substituted aromatic carboxylic acid with NaBH₄/Me₂SO₄/B(OMe)₃ is described. Borane is generated by the reaction of NaBH₄ with Me₂SO₄ in THF, which is as efficient as the commercial one. B(OMe)₃ has been successfully applied to increase the reactivity and selectivity of this reaction. The optimum ratio of borane/B(OMe)₃/acid is studied, and a variety of hydroxyl-substituted aromatic acids are reduced in good yields.     

Fluorolactonization of unsaturated carboxylic acids with F-TEDA-BF4 in ionic liquids

Fluorolactonization of unsaturated carboxylic acids under action of the electrophilic reagent F-TEDA-BF₄ in ionic liquids (ILs) has been studied. This reaction proceeds in ILs faster and provides a better stereoselectivity in comparison to acetonitrile as reaction media. Gem-difluorinated γ-lactones have been synthesized by interaction of unsaturated carboxylic acids with F-TEDA-BF₄ in ILs.     

Preparation of ginkgolide and F-seco-ginkgolide lactols: the unique reactivity of α-hydroxy lactones toward NaBH4

It has been found that NaBH₄ smoothly reduces the α-hydroxy-lactone moieties in ginkgolide and F-seco-ginkgolides to lactols. The reaction is rapid and stops at the lactol stage; the coordination of NaBH₄ to the conformationally rigid cage structure is involved in both the initiation and termination stages. This facile reduction of ginkgolide lactones yields a variety of new ginkgolide lactols.     

POCl3 promoted metal-free synthesis of tertiary amides by coupling of carboxylic acids and N,N-disubstituted formamides

Herein we report a robust and synthetically useful catalyst-free amination methodology by the coupling of carboxylic acids and N-substituted formamides using POCl₃ as a promoter. Versatile amides with a wide array of substituent groups were prepared within only 1?h in good to excellent yields. And even multi-substituted aromatic carboxylic acids could give the desired products with satisfactory results.     

An efficient one pot method for synthesis of carboxylic acids from nitriles using recyclable ionic liquid [bmim]HSO4

Environmentally benign ionic liquid [bmim]HSO₄ was found suitable for conversion of nitriles into carboxylic acids under mild conditions with excellent purity.     

Transition metal free oxidative esterification of alcohols with toluene

Using Bu₄NI as the catalyst and tert-butyl hydroperoxide as the oxidant, direct esterification of alcohols with toluene derivatives was achieved. Mechanistic investigations indicate that the alcohols are sequentially oxidized to aldehydes, carboxylic acids, and then to benzyl esters. Bu₄N⁺ functions as a phasetransfer reagent and iodide catalyzes the reaction.     

Electronic structures of the boron cage molecules B4H4, B4Cl4 and B4F4

Ab initio calculations have been performed on B₄H₄, B₄Cl₄ and B₄F₄ in order to aid our understanding of the bonding in these compounds, which is presumably based on a tetrahedral boron cage. This cage has only 8 electrons and so is less than that expected on the basis of the usual framework electron counting rules. Basis sets with polarisation functions were used at the SCF, CI and CPF levels of theory to confirm that the T _d structures are indeed more stable than the D _4h ones. Davidson-Roby population analyses were able to show that many factors, including 3-centre 2-electron bonding and backbonding from the ligand to the boron cage, are of importance in determining the relative stability of the three compounds, of which B₄Cl₄ is the only one that has yet been observed experimentally.     

3-Fluoroalkyl (CF3, CHF2, CH2F) Cyclobutane-Derived Building Blocks for Medicinal Chemistry: Synthesis and Physicochemical Properties

Synthesis and physicochemical characterization of all possible cis- and trans-1,3-disubstituted cyclobutane-derived amines and carboxylic acids bearing mono-, di- and trifluoromethyl groups at the C-3 position is disclosed. Tetramethylammonium fluoride (TMAF)- or morpholinosulfur trifluoride (Morph-DAST)-mediated nucleophilic fluorination of appropriate cis- and trans-diastereomeric substrates was used as the key step for the preparation of CH₂F- and CHF₂-substituted derivatives. To obtain the corresponding cis- and trans-isomeric CF₃-substituted derivatives, resolution of known 3-(trifluoromethyl)cyclobutanecarboxylic acid (obtained as a mixture of diastereomers) was applied. The proposed procedures were suitable for the preparation of corresponding fluoroalkyl-substituted cyclobutane-derived amines and carboxylic acids on up to 50 g scale. All 12 building blocks obtained were characterized by measuring dissociation constants (pK_a) and lipophilicities (LogP, for model derivatives) to evaluate the effect of the fluoroalkyl substituents on their physicochemical properties relevant to further drug discovery applications.     

Konzentrationen von Isomeren des Typs P m As4−m X 3 in P4S3-As4S3- und P4Se3-As4Se3-Mischungen

The reactions of P₄S₃ with As₄S₃ and of P₄Se₃ with As₄Se₃ in the molten state yields molecules of the type P _m As_4–m S₃ and P _m As_4–m Se₃, respectively. A method was developed to separate the different components by the HPLC technique, and to determine their concentrations. The identification of the isomers in the HPLC pattern was achieved with the aid of the LC-MS method. In the selenium system, the distribution of the different species is statistical. In the system P₄S₃-As₄S₃, the formation of PAs₃S₃ with one phosphorus atom in the apical position is favoured.

     

UCr4C4 with filled MoNi4 type structure

The title compound was prepared by arc melting coldpressed pellets of the elemental components with subsequent annealing at both 800°C or 1100°C. UCr₄C₄ crystallizes tetragonal, space group I4/m,a=0.79363 (4) nm,c=0.30754 (3) nm,V=0.19370 nm³ withZ=2 formula units per cell. The structure was determined from single-crystal X-ray data and refined to a residual ofR=0.027 for 16 variable parameters and 279 structure factors. The positions of the metal atoms correspond to those of the MoNi₄ type structure. The carbon atoms occupy octahedral voids formed by four chromium and two adjacent uranium atoms. Chemical bonding in UCr₄C₄ and in other interstitial compounds is briefly discussed. The average valence electron number of the metal atoms is usually greater for the unfilled (host) structure than for the corresponding filled structure.Dedicated to Prof. Dr.Kurt Komarek and to Prof. Dr.Adolf Neckel on the occasion of their 60th birthdays.     

Hydrogen storage in borohydrides Comparison of hydrolysis conditions of LiBH<Subscript>4</Subscript>, NaBH<Subscript>4</Subscript> and KBH<Subscript>4</Subscript>

The hydrogen storage capabilities of alkaline borohydrides through a hydrolyzing process were determined by taking into consideration the hydration of the end products. Comparison of LiBH₄, NaBH₄ and KBH₄ showed their storage capacities to be dependent on the composition of the metaborate formed. This composition is ruled by the hydrolysis conditions, especially the temperature reached during the reaction and the stability of the hydrates. The borohydride with the highest hydrogen content in the solid state, LiBH₄, could be less efficient than KBH₄ if the hydrolysis is performed at 120°C.     

NaBH4/Charcoal: A New Synthetic Method for Mild and Convenient Reduction of Nitroarenes

NaBH₄ in the presence of charcoal (0.4–0.8 g) reduces varieties of nitroarenes to their corresponding amines. Reduction reactions were carried out in a mixture of H₂O‐THF (1:0.5 mL) at 50–60°C with high to excellent yields of products.     

Interaction Between Two Similar Plane Parallel Double Layers for (NH4)2Fe(SO4)2 or (NH4)2Cu(SO4)2 Type Complex Salt Electrolytes at Positive Surface Potential

Interaction energies between two similar plane parallel double layers for (NH₄)₂Fe(SO₄)₂ or (NH₄)₂Cu(SO₄)₂ type complex salt electrolytes at positive surface potential were expanded in a power series and accurate numeral results were given for 0.1 ≤ y _e  < y ₀ ≤ 20. The general expressions were given for the interaction energies of A _ν +B _ν′ +C_ν? type complex salt electrolytes at y > 0. The interaction energies for simple salts NaCl, CaCl₂, Na₂SO₄, FeCl₃, Na₃PO₄, Mg₃(PO₄)₂, Al₂(SO₄)₃, and complex salts (NH₄)₂Fe(SO₄)₂ or (NH₄)₂Cu(SO₄)₂ at y ₀ = 1 were compared. There was hardly difference between these simple salts and this complex salt for the interaction energies. The interaction energy for complex salt (NH₄)₂Fe(SO₄)₂ was close to that for simple salt Na₃PO₄.

Supplemental files are available for this article. Go to the publisher's online edition of the Journal of Dispersion Science and Technology to view the free supplemental file.     

On the crystal chemistry of three copper(II)-arsenates: Cu3(AsO4)2-III,Na4Cu(AsO4)2, and KCu4(AsO4)3

The three copper(II)-arsenates were synthesized under hydrothermal conditions; their crystal structures were determined by single-crystal X-ray diffraction methods:Cu₃(AsO₄)₂-III:a=5.046(2) Å,b=5.417(2) Å,c=6.354(2) Å, =70.61(2)°, =86.52(2)°, =68.43(2)°,Z=1, space group ,R=0.035 for 1674 reflections with sin / 0.90 Å^–1.Na₄Cu(AsO₄)₂:a=4.882(2) Å,b=5.870(2) Å,c=6.958(3) Å, =98.51(2)°, =90.76(2)°, =105.97(2)°,Z=1, space group ,R=0.028 for 2157 reflections with sin / 0.90 Å^–1.KCu₄(AsO₄)₃:a=12.234(5) Å,b=12.438(5) Å,c=7.307(3) Å, =118.17(2)°,Z=4, space group C2/c,R=0.029 for 1896 reflections with sin / 0.80 Å^–1.Within these three compounds the Cu atoms are square planar [4], tetragonal pyramidal [4+1], and tetragonal bipyramidal [4+2] coordinated by O atoms; an exception is the Cu(2)^[4+1] atom in Cu₃(AsO₄)₂-III: the coordination polyhedron is a representative for the transition from a tetragonal pyramid towards a trigonal bipyramid. In KCu₄(AsO₄)₃ the Cu(1)^[4]O₄ square and the As(1)O₄ tetrahedron share a common O—O edge of 2.428(5) Å, resulting in distortions of both the CuO₄ square and the AsO₄ tetrahedron. The two Na atoms in Na₄Cu(AsO₄)₂ are [6] coordinated, the K atom in KCu₄(AsO₄)₃ is [8] coordinated by O atoms.Die drei Kupfer(II)-Arsenate wurden unter Hydrothermalbedingungen gezüchtet und ihre Kristallstrukturen mittels Einkristall-Röntgenbeugungsmethoden ermittelt:Cu₃(AsO₄)₂-III:a = 5.046(2) Å,b = 5.417(2) Å,c = 6.354(2) Å, = 70.61 (2)°, = 86.52(2)°, = 68.43(2)°,Z = 1, Raumgruppe ,R = 0.035 für 1674 Reflexe mit sin / 0.90 Å^–1.Na₄Cu(AsO₄)₂:a = 4.882(2) Å,b = 5.870(2) Å,c = 6.958(3) Å, = 98.51(2)°, = 90.76(2)°, = 105.97(2)°,Z = 1, Raumgruppe ,R = 0.028 für 2157 Reflexe mit sin / 0.90 Å^–1.KCu₄(AsO₄)₃:a = 12.234(5) Å,b = 12.438(5) Å,c = 7.307(3) Å, = 118.17(2)°,Z = 4, Raumgruppe C2/c,R = 0.029 für 1896 Reflexe mit sin / 0.80 Å^–1.Die Cu-Atome in diesen drei Verbindungen sind durch O-Atome quadratisch planar [4], tetragonal pyramidal [4 + 1] und tetragonal dipyramidal [4 + 2]-koordiniert; eine Ausnahme ist das Cu(2)^{[4 + 1]}-Atom in Cu₃(AsO₄)₂-III: Das Koordinationspolyeder stellt einen Vertreter des Übergangs von einer tetragonalen Pyramide zu einer trigonalen Dipyramide dar. In KCu₄(AsO₄)₃ haben das Cu(1)^[4]O₄-Quadrat und das As(1)O₄-Tetraeder eine gemeinsame O—O-Kante von 2.428(5) Å, was eine Verzerrung der beiden Koordinationsfiguren CuO₄-Quadrat und AsO₄-Tetraeder bedingt. Die zwei Na-Atome in Na₄Cu(AsO₄)₃ sind durch O-Atome [6]-koordiniert, das K-Atom in KCu₄(AsO₄)₃ ist [8]-koordiniert.

---

Zur Kristallchemie dreier Kupfer (II)-Arsenate: Cu₃(AsO₄)₂-III, Na₄Cu(AsO₄)₂ und KCu₄(AsO₄)₃