Theoretical study of the stability of multiply charged C70 fullerenes

We have calculated the electronic energies and optimum geometries of C(70) (q+) and C(68) (q+) fullerenes (q=0-14) by means of density functional theory. The ionization energies for C(70) and C(68) fullerenes increase more or less linearly as functions of charge, consistent with the previously reported behavior for C(60) and C(58) [S. Diaz-Tendero et al., J. Chem. Phys. 123, 184306 (2005)]. The dissociation energies corresponding to the C(70) (q+)-->C(68) (q+)+C(2), C(70) (q+)-->C(68) ((q-1)+)+C(2) (+), C(70) (q+)-->C(68) ((q-2)+)+C(+)+C(+), C(70) (q+)-->C(68) ((q-3)+)+C(2+)+C(+), and C(70) (q+)-->C(68) ((q-4)+)+C(2+)+C(2+) decay channels show that C(70) (q+) (like C(60) (q+)) is thermodynamically unstable for q>or=6. However, the slope of the dissociation energy as a function of charge for a given decay channel is different from that of C(60) (q+) fullerenes. On the basis of these results, we predict q=17 to be the highest charge state for which a fission barrier exists for C(70) (q+).     

Synthesis of the ABCD and ABCDE ring systems of azaspiracid-1

The efficient syntheses of the ABCD ring system of the originally proposed structure of azaspiracid-1 and the ABCDE ring system of the revised structure of azaspiracid-1 containing the correct stereochemistry at C(6), C(10), C(13), C(14), C(16), C(17), C(19), C(21), C(22), C(24) and C(25) have been achieved.     

Total synthesis of phorboxazole A. 2. Assembly of subunits and completion of the synthesis

[Structure: see text] Subunits of phorboxazole A containing C1-C2, C3-C8, C9-C19, C20-C32, C33-C41, and C42-C46 were connected in a sequence that first linked C32 with C33 and then C41 with C42. A C3-C8 fragment was joined to C9-C19, and the assembled unit was then joined with the left half of 1. Closure of the macrolide was accomplished by esterification of the C24 alcohol followed by intramolecular Horner-Wadsworth-Emmons condensation to set the (E)-C2-C3 alkene.     

Effect of hydrocarbon structure of the headgroup on the thermodynamic properties of micellization of cationic gemini surfactants: an electrical conductivity study

A series of cationic gemini surfactants butanediyl-1,4-bis(dodecyldialkylammonium bromide), C(12)H(25)N(+)(C(m)H(2)(m)(+1))(2)C(4)H(8)N(+)(C(m)H(2)(m)(+1))(2)C(12)H(25)·2Br(-), where m=1, 2, 3, 4, referred to as C(12)C(4)C(12)(Me), C(12)C(4)C(12)(Et), C(12)C(4)C(12)(Pr), and C(12)C(4)C(12)(Bu), respectively, were synthesized, and their thermodynamic properties of micellization were studied by electrical conductivity measurements. There existed a minimum critical micelle concentration (cmc) in the curve of cmc versus temperature, and the temperature of the minimum of cmc (T(min)) increased with increasing the headgroup alkyl chain length. The values of log (cmc) depended linearly on carbon number of the alkyl chains, but that was not true for the carbon number of the headgroup substituents. The temperature dependence of cmc and degree of counterion association (β) were used to calculate the Gibbs free energy (Δ(mic)G°), enthalpies (Δ(mic)H°) and entropies (Δ(mic)S°) of micelle formation for these gemini surfactants, and well correlated enthalpy-entropy compensation was observed. The analyses showed C(12)C(4)C(12)(Me) and C(12)C(4)C(12)(Et) behaved similarly in terms of thermodynamics of micellization, but they behaved differently from C(12)C(4)C(12)(Pr) and C(12)C(4)C(12)(Bu), which could be ascribed to the hydrophobicity and the location of the headgroup alkyl chains in the aggregates. These initial results indicate the headgroup alkyl chain plays an important role in influencing the thermodynamic properties of gemini surfactants.     

Group additive values for the gas phase standard enthalpy of formation of hydrocarbons and hydrocarbon radicals

A complete and consistent set of 95 Benson group additive values (GAV) for the standard enthalpy of formation of hydrocarbons and hydrocarbon radicals at 298 K and 1 bar is derived from an extensive and accurate database of 233 ab initio standard enthalpies of formation, calculated at the CBS-QB3 level of theory. The accuracy of the database was further improved by adding newly determined bond additive corrections (BAC) to the CBS-QB3 enthalpies. The mean absolute deviation (MAD) for a training set of 51 hydrocarbons is better than 2 kJ mol(-1). GAVs for 16 hydrocarbon groups, i.e., C(C(d))(3)(C), C-(C(d))(4), C-(C(t))(C(d))(C)(2), C-(C(t))(C(d))(2)(C), C-(C(t))(C(d))(3), C-(C(t))(2)(C)(2), C-(C(t))(2)(C(d))(C), C-(C(t))(2)(C(d))(2), C-(C(t))(3)(C), C-(C(t))(3)(C(d)), C-(C(t))(4), C-(C(b))(C(d))(C)(H), C-(C(b))(C(t))(H)(2), C-(C(b))(C(t))(C)(H), C-(C(b))(C(t))(C)(2), C(d)-(C(b))(C(t)), for 25 hydrocarbon radical groups, and several ring strain corrections (RSC) are determined for the first time. The new parameters significantly extend the applicability of Benson's group additivity method. The extensive database allowed an evaluation of previously proposed methods to account for non-next-nearest neighbor interactions (NNI). Here, a novel consistent scheme is proposed to account for NNIs in radicals. In addition, hydrogen bond increments (HBI) are determined for the calculation of radical standard enthalpies of formation. In particular for resonance stabilized radicals, the HBI method provides an improvement over Benson's group additivity method.     

Selective extraction of higher fullerenes using cyclic dimers of zinc porphyrins

Higher fullerenes (>/=C76) were selectively extracted from a fullerene mixture obtained from a combustion-based industrial production source by cyclic dimers of beta-unsubstituted porphyrin zinc complexes 2C5-2C7 with C5-C7 alkylene spacers as host molecules. Results of single extraction of the fullerene mixture with 2C5-2C7 together with a beta-substituted analogue of 2C6 (1C6) and spectroscopic titration of 2C6 and 1C6 with C60, C70, and C96 indicated that the host selectivity toward higher fullerenes is much dependent on the structure of the porphyrin units and the size of the host cavity. Sequential three-stage extraction of the fullerene mixture with the best-behaved 2C6 resulted in considerable enrichment in very rare fullerenes C102-C110 (<0.1 abs %) up to 82 abs % (C76-C114, 99 abs %) (356 nm) of total fullerenes.     

Stereoselective synthesis of the C-11 to C-19 segment of macrolactin 3 via a center inversion followed by Oxa-Michael addition approach

An efficient and short stereoselective synthesis of C11–C19 fragment of Macrolactin 3 was achieved. The vic-triol moiety (C15–C17) was derived from the C2–C4 chiral centers of D-mannose. The C-1 of D-mannose was utilized for the Wittig-olefination followed by hydroxylation using hydroboration reaction to introduce C11–C13 carbon chain in the C11–C19 fragment, whereas C5–C6 carbon chain of mannose was converted into C18–C19 of the target by dehydration reactions. Thus, the main strategy was (a) two consecutive Wittig-olefination reactions on C1 carbon of mannose, (b) inversion of C4 stereocenter, and (c) dehydration of C5–C6 vic-diol to olefin to result in the C11–C19 fragment.     

Fullerenes制备中C60和C70含量不同的热力学解释

本文计算了不同温度下气相反应7/6 C60=C70的热力学函数, 讨论了C60与C70之间相互转化的热力学条件。结果表明, 温度高于2828K时气相中C60比C70稳定, 温度低于2828K时气相中C70比C60稳定, 解释了由石墨制备Fullerenes时, C60和C70含量不同的原因。     

Synthetic studies on oligomycins. Enantiospecific synthesis of the oligomycin B spiroketal portion and establishment of the absolute stereochemistry of oligomycin B

The enantiospecific synthesis of the oligomycin B degradation product 2, corresponding to the C19–C34 spiroketal portion, has been achieved by sequential coupling of the C19–C21, C22–C27, and C28–C34 subunits, establishing the absolute stereochemistry of oligomycin B.     

Total Synthesis of the 7,10‐Epimer of the Proposed Structure of Amphidinolide N,Part II: Synthesis of C17–C29 Subunit and Completion of the Synthesis

The total synthesis of 7,10‐epimer of the proposed structure of amphidinolide N was accomplished. The requisite chiral C17–C29 subunit was assembled stereoselectively via Keck allylation, Shi epoxidation, diastereoselective 1,3‐reduction, and a later oxidative synthesis of the THF framework. The C1–C13 and C17–C29 subunits were successfully coupled using a Enders RAMP “linchpin” as the C14–C16 three carbon unit, thereby controlling the chirality at C14 and C16. The labile allyl epoxy moiety was successfully constructed by Grieco–Nishizawa olefination at a final stage of the synthesis.     

Structural effects of multiple-bonds on aggregating tendencies of long-chain esters

The kinetics of the hydrolysis of p-nitrophenyl esters of three types of single-chain carboxylic acids, namely, saturated, olefinic and acetylenic, was investigated in two aquiorgano binary solvent systems, DMSO-H₂O and dioxane (DX)-H₂O. The ester probes used are: octanoic (C8), dodecanoic (C12) , stearic (C18) , oleic (C18-ol) , elaidic (C18-el ) and stearolic (C18-st). The order of measured CAgC values is: C18-ol>C18-el>C18>C18-st, whereas the order of decreasing magnitude of the observed hydrolytic rate constants of the monomeric species (k_m) is: C18>C18-el>C18-ol> C18-st. These rather unanticipated results are discussed.     

氯化烷基咪唑系列离子液体标准摩尔燃烧焓和生成焓

用精密氧弹热量计测定了4种离子液体: 氯化1-甲基-3-乙基咪唑(C2MIC), 氯化1-甲基-3-丁基咪唑(C4MIC), 氯化1-甲基-3-戊基咪唑(C5MIC)和氯化1-甲基-3-己基咪唑(C6MIC)的燃烧热, 计算了它们的标准摩尔燃烧焓 和标准摩尔生成焓 , 结合文献中的标准摩尔溶解焓, 估算了烷基咪唑阳离子在水溶液中的标准摩尔生成焓, 以及亚甲基对标准摩尔燃烧焓和标准摩尔生成焓的贡献.     

Effect of surfactant structure on the stability of carbon nanotubes in aqueous solution

The suspending behaviors of multiple-wall carbon nanotubes (MWNTs), including pristine MWNTs (p-MWNTs) and acid-mixture-treated MWNTs (MWNTCOOH), stabilized by cationic single-chain surfactant, dodecyltrimethylammonium bromide (DTAB), and cationic gemini surfactant hexyl-alpha,beta-bis(dodecyldimethylammonium bromide) (C 12C 6C 12Br 2) were studied systematically. The surfactant structure influences the suspendability of MWNTs dramatically as well as the surfactant adsorption behavior on the nanotubes. Although both the surfactants can disperse the MWNTs effectively, they actually show different stabilizing ability. DTAB is not capable of stabilizing these two MWNTs below critical micelle concentration (CMC). However, C 12C 6C 12Br 2 can suspend both the nanotubes effectively even well below its CMC. Moreover, the adsorption of these two surfactants reaches equilibrium at twice the CMC with the original MWNT concentration of 2 mg/mL, 2 mM for C 12C 6C 12Br 2, and 30 mM for DTAB. After the adsorption equilibrium, the maximum amounts of the two suspended MWNTs in C 12C 6C 12Br 2 solution are about twice as much as those in DTAB solution. The strong hydrophobic interaction among the C 12C 6C 12Br 2 molecules and between the C 12C 6C 12Br 2 molecules and the nanotubes as well as the high charge capacity of C 12C 6C 12Br 2 lead to its much stronger adsorption ability on the MWNTs and result in its superior stabilizing ability for the MWNTs in aqueous phase. The gemini surfactant provides a possibility to effectively stabilize the MWNTs in aqueous solutions even at very low surfactant concentration well below its CMC.     

Assembly of the Entire Carbon Backbone of a Stereoisomer of the Antitumor Marine Natural Product Hemicalide

A strategy for the assembly of the entire carbon backbone of a stereoisomer of the antitumor marine natural product hemicalide has been investigated. The devised convergent approach relies on Horner–Wadsworth–Emmons and Julia–Kocienski olefination reactions for the construction of the C6=C7 and C34=C35 double bonds, respectively, an aldol reaction to create the C27−C28 bond, and a Suzuki–Miyaura cross-coupling as the endgame to form the C15−C16 bond.     

Synthesis of the common left-half part of pectenotoxins

The common left-half [C31-C33(OC1-C7)-C40] part of pectenotoxins has been synthesized convergently from the C31-C35, C36-C40, and C1-C7 parts. The C31-C35 part, prepared via a new route shorter than our previous route, was coupled with the C36-C40 part through reductive lithiation and addition reactions to give an adduct stereoselectively, which was converted to a cyclic acetal corresponding to the C31-C40 part. The left-half was synthesized by a three-step process including esterification of the C31-C40 part with the C1-C7 part.     

C60氢胺化反应及其在制备含C60功能材料中的应用

C60与胺类化合物的反应是C60衍生化的重要方法。 本文介绍了C60氢胺化反应的一般规律和特点,对C60氢胺化反应在制备含C60高分子功能材料、含C60自组装单分子膜(SAM)、含C60有机/无机纳米材料和C60生物功能材料等方面应用的研究进展作了综述。     

生物催化用于C—C键的立体选择性合成

C—C键的立体选择性形成是有机合成化学的重要方面. 生物催化剂的立体选择性是它们的主要优势之一, 用酶催化C—C键形成已引起了广泛关注. 总结了生物转化中C—C键形成的最新应用, 着重讨论了醛缩酶和转酮醇酶生物催化剂的应用.     

Composition and major odorous compounds of the essential oil of Bifora radians,an aldehyde-producing weed

The composition of the essential oil of Bifora radians, an aldehyde-producing weed, has been investigated by capillary gas chromatography, coupled gas chromatography – mass spectrometry, on-line catalytic hydrogenation and coupled gas chromatography – infrared spectrometry. The nineteen compounds identified included eighteen aldehydes: seven alkanals (C6, C9, C10, C11, C12, C13, and C14), ten alkenals, including five (E)-2-alkenals (C12, C13, C14, C15, and C16), and one (E,E)-2,4-alkadienal (C13). Typical Bifora odors were attributed to three major (E)-2-alkenals, C12, C13, and C14.     

Synthesis and X-ray or NMR/DFT structure elucidation of twenty-one new trifluoromethyl derivatives of soluble cage isomers of C76, C78, C84, and C90

Adding 1% of the metallic elements cerium, lanthanum, and yttrium to graphite rod electrodes resulted in different amounts of the hollow higher fullerenes (HHFs) C76-D2(1), C78-C2v(2), and C78-C2v(3) in carbon-arc fullerene-containing soots. The reaction of trifluoroiodomethane with these and other soluble HHFs at 520-550 degrees C produced 21 new C76,78,84,90(CF3)n derivatives (n = 6, 8, 10, 12, 14). The reaction with C76-D2(1) produced an abundant isomer of C2-(C76-D2(1))(CF3)10 plus smaller amounts of an isomer of C1-(C76-D2(1))(CF3)6, two isomers of C1-(C76-D2(1))(CF3)8, four isomers of C1-(C76-D2(1))(CF3)10, and one isomer of C2-(C76-D2(1))(CF3)12. The reaction with a mixture of C78-D3(1), C78-C2v(2), and C78-C2v(3) produced the previously reported isomer C1-(C78-C2v(3))(CF3)12 (characterized by X-ray crystallography in this work) and the following new compounds: C2-(C78-C2v(3))(CF3)8; C2-(C78-D3(1))(CF3)10 and C(s)-(C78-C2v(2))(CF3)10 (both characterized by X-ray crystallography in this work); C2-(C78-C2v(2))(CF3)10; and C1-C78(CF3)14 (cage isomer unknown). The reaction of a mixture of soluble higher fullerenes including C84 and C90 produced the new compounds C1-C84(CF3)10 (cage isomer unknown), C1-(C84-C2(11))(CF3)12 (X-ray structure reported recently), D2-(C84-D2(22))(CF3)12, C2-(C84-D2(22))(CF3)12, C1-C84(CF3)14 (cage isomer unknown), C1-(C90-C1(32))(CF3)12, and another isomer of C1-C90(CF3)12 (cage isomer unknown). All compounds were studied by mass spectrometry, (19)F NMR spectroscopy, and DFT calculations. An analysis of the addition patterns of these compounds and three other HHF(X) n compounds with bulky X groups has led to the discovery of the following addition-pattern principle for HHFs: In general, the most pyramidal cage C(sp(2)) atoms in the parent HHF, which form the most electron-rich and therefore the most reactive cage C-C bonds as far as 1,2-additions are concerned, are not the cage C atoms to which bulky substituents are added. Instead, ribbons of edge-sharing p-C6(X)2 hexagons, with X groups on less pyramidal cage C atoms, are formed, and the otherwise "most reactive" fullerene double bonds remain intact.     

Double transacetalization of diacylium ions

A novel gas-phase reaction of diacylium ions of the O=C=X(+)=C=O type (X = N, CH) is reported: double transacetalization with cyclic acetals or ketals. The reaction is exothermic and highly efficient, and forms members of a new class of highly charged-delocalized ions: cyclic ionic diketals. Pentaquadrupole double- and triple-stage mass spectrometric (MS(2) and MS(3)) experiments reveal the high double transacetalization reactivity of O=C=N(+)=C=O and O=C=CH(+)=C=O, whereas the synthesis of differently substituted cyclic ionic diketals is performed in MS(3) experiments via sequential mono- and double transacetalization of O=C=N(+)=C=O and O=C=CH(+)=C=O with different acetals. With cyclic acetals, the acylium-thioacylium ion O=C=N(+)=C=S reacts promptly and selectively by mono-transacetalization at its acylium site, but the free thiacylium site of its cyclic ionic ketal is nearly unreactive by double transacetalization. Therefore, only the acylium site of O=C=N(+)=C=S can be efficiently protected by transacetalization. Low-energy MS(3) collision-induced dissociation of the cyclic ionic diketals of O=C=N(+)=C=O and O=C=CH(+)=C=O sequentially frees each of the protected acylium site to form the mono-derivatized ion, and then the fully deprotected diacylium ion.