Palladium/tetraphosphine catalyzed suzuki cross‐coupling of heteroarylboronic acids with aryl halides

cis,cis,cis‐1,2,3,4‐Tetrakis(diphenylphosphinomethyl)cyclopentane/[PdCl(C₃H₅)]₂ efficiently catalyses the Suzuki reaction of heteroarylboronic acids with aryl bromides and also the coupling of arylboronic acids with heteroaryl bromides. The coupling of thiophene‐ or benzothiopheneboronic acids, furan‐ or benzofuranboronic acids and 3‐pyridineboronic acid with a variety of aryl bromides gave the corresponding coupling products in good yields. However, in most cases, better results in terms of ratio substrate/catalyst were obtained for the reverse reaction using heteroaryl bromides with arylboronic acids.     

Catalytic activity of Pd(II) and Pd(II)/DAB-R systems for the Heck arylation of olefins

Palladium-catalyzed reactions of aryl bromides with various olefins involving Pd(II)/diazabutadiene (DAB-R) systems have been investigated. The scope of a coupling process using Pd(II) sources and an α-diimine as ligand in the presence of Cs₂CO₃ as base was tested using various substrates. The Pd(OAc)₂/DAB-Cy (1, DAB-Cy=1,4-dicyclohexyl-diazabutadiene) system presents the highest activity with respect to electron-neutral and electron-deficient aryl bromides in coupling with electron rich olefins. The synthesis and X-ray characterization of a Pd(II)-diazabutadiene ligand is reported. Extensive optimization experiments showed that another Pd(II) source, Pd(acac)₂ (acac=acetylacetonate), proved to activate aryl bromides at high temperatures, low catalyst loadings when the appropriate concentration of ⁿBu₄NBr additive was employed. The effect of the DAB-Cy ligand is important at very low catalyst loadings and high temperatures. Pd(acac)₂ and Pd(acac)₂/DAB-Cy precatalysts were very effective for the arylation of various olefins with aryl bromides with respect to reaction rate, catalyst loadings, and functional group tolerance.     

New Method for the Synthesis of Benzyl Alkyl Ethers Mediated by FeSO4

The synthesis of benzyl alkyl ethers from benzyl bromides and alcohols using FeSO₄ as a recoverable and reusable mediator has been described without use of base and cosolvent under mild conditions.     

Programmed Site‐Selective Palladium‐Catalyzed Arylation of Thieno[3,2‐b]thiophene

Mono‐, di‐, tri‐, and tetraarylated thieno[3,2‐b ]thiophenes were synthesized by direct site‐selective Pd‐catalyzed C−H activation reactions with various aryl bromides in the presence of a phosphine‐free Pd(OAc)₂/KOAc catalyst system in N ,N ‐dimethylacetamide (DMAc). The arylation of 2‐arylthieno[3,2‐b ]thiophene took place at the C3 position if the 2‐aryl substituents possessed electron‐withdrawing groups and at the C5 position if they were bulky and possessed electron‐donating groups.     

CuI/PPh3/PEG–Water: An Efficient Catalytic System for Cross-Coupling Reaction of Aryl Iodides and Alkynes

An efficient protocol for the copper-catalyzed Sonogashira coupling of aryl iodides with terminal acetylenes in water–polyethylene glycol has been established. Both electron-rich and electron-deficient aryl iodides were arylalkynated under microwave heating or reflux in oil bath to afford good to excellent yields.      

A general and efficient method for the palladium-catalyzed cross-coupling of thiols and secondary phosphines

The general and efficient cross-coupling of thiols with aryl halides was developed utilizing Pd(OAc)₂/1,1′-bis(diisopropylphosphino)ferrocene as the catalyst. The substrate scope is broad and includes a variety of aryl bromides and chlorides, which can be coupled to aliphatic and aromatic thiols. This catalyst system has the widest substrate scope of any reported to date. The present catalyst system also enables the palladium-catalyzed coupling of secondary phosphines with aryl bromides and chlorides.     

One-Pot Synthesis of 2,4,5-Trisubstituted Imidazoles Using MoO3/SiO2, an Efficient and Recyclable Catalyst

A simple one-pot synthesis has been developed for the synthesis of 2,4,5-trisubstituted imidazoles using an efficient and recyclable MoO₃/SiO₂ solid acid catalyst by condensation of benzil or benzoin, benzaldehyde, and ammonium acetate in acetonitrile as a solvent. Using this solid catalyst, the reactions could be carried out under mild reaction conditions with very good yield of imidazoles, up to 95%. This catalyst could be recycled very easily, which makes this methodology environmentally benign.     

Cross‐Electrophile Coupling of Vinyl Halides with Alkyl Halides

An improved method for the reductive coupling of aryl and vinyl bromides with alkyl halides that gave high yields for a variety of substrates at room temperature with a low (2.5 to 0.5 mol %) catalyst loading is presented. Under the optimized conditions, difficult substrates, such as unhindered alkenyl bromides, can be coupled to give the desired olefins with minimal diene formation and good stereoretention. These improved conditions also worked well for aryl bromides. For example, a gram‐scale reaction was demonstrated with 0.5 mol % catalyst loading, whereas reactions at 10 mol % catalyst loading completed in as little as 20 minutes. Finally, a low‐cost single‐component pre‐catalyst, (bpy)NiI₂ (bpy=2,2′‐bipyridine) that is both air‐ and moisture‐stable over a period of months was introduced.     

Suzuki Coupling of Cyclopropylboronic Acid With Aryl Halides Catalyzed by a Palladium–Tetraphosphine Complex

The tetraphosphine all‐cis‐1,2,3,4‐tetrakis(diphenylphosphinomethyl)cyclopentane (Tedicyp) in combination with [Pd(C₃H₅)Cl]₂ affords a very efficient catalyst for the coupling of cyclopropylboronic acid with aryl bromides and aryl chlorides. Higher reactions rates were observed with aryl bromides than with aryl chlorides; however, even in the presence of 1–0.4% of catalyst, a few aryl chlorides gave the coupling products in good yields. A wide variety of substituents such as alkyl, methoxy, trifluoromethyl, acetyl, benzoyl, formyl, carboxylate, nitro, and nitrile on the aryl halides are tolerated. The coupling reaction of sterically very congested aryl bromides such as bromomesitylene or 2,4,6‐triisopropylbromobenzene also proceeds in good yields.     

Synthesis and applications of a new palladacycle as a high active catalyst in the Suzuki couplings

The reaction of biphenyl-based phosphine P(o-C₆H₄Me)Ph₂ (1) with Pd(OAc)₂ in toluene affords the air and water stable palladacycle (2) as a binuclear compound which has been characterized by multi-nuclear NMR spectroscopy and elemental analysis as a mixture of cis and trans isomers with relative intensity of 1:3, respectively. This palladacycle is a highly efficient catalyst precursor for the coupling of aryl boronic acids and aryl halides. Both activated and deactivated aryl bromides and chlorides are efficiently coupled in the presence of 2 to furnish the corresponding cross-coupled products in excellent yields, and a wide variety of functional groups are tolerated in aryl halides. This methodology has also been extended for the coupling of bromoarylphosphines and bromoarylphosphine oxides with aryl boronic acids for the generation of hindered corresponding products.     

Direct arylation of oxazole and benzoxazole with aryl or heteroaryl halides using a palladium-diphosphine catalyst

Through the use of PdCl(dppb)(C₃H₅) as a catalyst, a range of aryl bromides and chlorides undergoes coupling via C-H bond activation/functionalization reaction with oxazole or benzoxazole in good yields. This air-stable catalyst can be used at low loadings with several substrates. Surprisingly, better results in terms of substrate/catalyst ratio were obtained in several cases using electron-excessive aryl bromides than with the electron-deficient ones. This seems to be mainly due to the relatively low thermal stability of some of the 2-arylbenzoxazoles formed with electron-deficient aryl halides. With these substrates, in order to obtain higher yields of product, the reactions had to be performed at a lower temperature (100-120 °C) using a larger amount of catalyst. On the other hand, in the presence of the most stable products, the reactions were performed at 150 °C using as little as 0.2 mol% catalyst. Arylation of benzoxazole with heteroaryl bromides also gave the coupling products in moderate to high yields using 0.2-5 mol% catalyst. With this catalyst, electron-deficient aryl chloride such as 4-chlorobenzonitrile, 4-chloroacetophenone or 2-chloronitrobenzene have also been used successfully.     

Microwave-assisted Pd(OH)2-catalyzed direct C−H arylation of free-(NH2) adenines with aryl halides

A direct C−H arylation of free-(NH₂) adenines using Pd(OH)₂/C (Pearlman’s catalyst) and stoichiometric amount of copper iodide under ligandless microwave activation is described. This new protocol proved to be highly effective to synthesize a variety of 8-aryladenine derivatives 3 without prior protection of the amino substituent. The arylation reaction takes place rapidly within few minutes and allows the coupling to proceed regioselectively at the 8-position with a wide range of aryl halides including aryl iodides, bromides and the less reactive aryl chlorides.     

Di-t-butyl(ferrocenylmethyl)phosphine: air-stability, structural characterization, coordination chemistry, and application to palladium-catalyzed cross-coupling reactions

Di-t-butyl(ferrocenylmethyl)phosphine (1) has been isolated and structurally characterized. This ligand was found to be reasonably air stable as a solid and it has been shown to possess electron donating ability similar to that of tri-i-propylphosphine. A palladium catalyst bearing this ligand performed room temperature Suzuki-Miyaura coupling reactions with aryl bromides. Modest Heck coupling reactivity with aryl bromides was also observed at 100 °C. Complexation of 1 with Pd₂(dba)₃ led to formation of (1)₂Pd⁰. Addition of 4-bromoanisole to solutions containing both 1 and Pd₂(dba)₃ led to formation of an oxidative addition product when 1:Pd ratios were ?1. With a 2:1 ratio of 1:Pd, monophosphine complex formation and oxidative addition were significantly inhibited.     

Convenient Synthesis of Monosubstituted Arylferrocenes Using PEG-1000 as Phase-Transfer Catalyst

A new approach for the synthesis of monosubstituted arylferrocenes based on the coupling of aryldiazonium salts with ferrocene using PEG-1000 as an efficient phase-transfer catalyst was developed. The present method is applicable to many kinds of substituted aromatic amines, providing good to excellent yields of desired products.      

An inexpensive and highly stable ligand 1,4-bis(2-hydroxy-3,5-di-tert-butylbenzyl)piperazine for Mizoroki-Heck and room temperature Suzuki-Miyaura cross-coupling reactions

A bulky, inexpensive and simple bidentate ligand 1,4-bis(2-hydroxy-3,5-di-tert-butylbenzyl)piperazine (1) has been synthesized and characterized. The palladium catalyst was formed by combination of 1 with [Cl₂Pd(COD)] in a ratio of 1:1, tested in the Suzuki-Miyaura and Mizoroki-Heck cross-coupling reactions. Coupling of a variety of aryl bromides with phenylboronic acid using methanol as solvent at room temperature, or at 60 °C, gave generally high yields of coupled products. Coupling of aryl chlorides with organoboron reagent at 110 °C in DMF afforded good yields of biaryls under aerobic conditions. This non-phosphorus, air and moisture stable catalyst also displays good activity for Mizoroki-Heck coupling reaction in methanol at 60 °C with various aryl chlorides and bromides.     

A practical synthesis of highly functionalized aryl nitriles through cyanation of aryl bromides employing heterogeneous Pd/C: in quest of an industrially viable process

Preparation of aryl nitrile 2a through classical Rosenmund-von Braun reaction of aryl bromide 1a resulted in a poor yield (61%) due to a high reaction temperature (165 °C) and a lack of efficient procedure for separating 2a from a large quantity of heavy metal waste (Cu salts). To address these issues, a practical synthesis of multifunctional aryl nitriles through cyanation of aryl bromides has been developed with heterogeneous Pd/C used as the catalyst. Treatment of aryl bromides 1 with Zn(CN)₂ in the presence of Pd/C, Zn, ZnBr₂ and PPh₃ in DMA provided aryl nitriles 2 involving those carrying sterically demanding electron-rich substituent in good yields and in highly reproducible manner. The activity of Pd/C is highly dependent on the properties of the Pd/C. Oxidic thickshell type catalyst Pd/C D5 was found to furnish the highest rate acceleration and yield. The use of heterogeneous Pd/C might anchor and disperse Pd over the solid support of the catalyst, at least in the initial stage of the reaction, to assure the formation of monomeric Pd complex without precipitating to inactive Pd black. The use of a slightly excess of Zn(CN)₂ (0.6 equiv) and air oxidation of phosphine ligand, after end of the reaction, converted Pd species to insoluble phosphine-free Pd cyanides, from which Pd was recovered in high yield through simple filtration followed by usual recovery process involving combustion.     

Highly efficient copper(0)-catalyzed Suzuki-Miyaura cross-coupling reactions in reusable PEG-400

Readily available copper powder with K₂CO₃ as the base was extremely effective catalyst for Suzuki-Miyaura coupling reaction performed in PEG-400, which afforded almost quantitative coupling products of aryl iodides. Using iodine as additive, coupling products of aryl bromides or chlorides could be obtained with moderate to good yields.     

Synthesis of cobalt-containing monodentate phosphine ligand and application toward Suzuki cross-coupling reactions

A bulky, dicobalt complexed, mono-dentate phosphine, [(μ-PPh₂CH₂PPh₂)Co₂(CO)₄](μ,η-PhCCPCy₂) (4), was prepared from the reactions of the bis(diphenylphosphino)methylene (dppm)-bridged dicobalt complex Co₂(CO)₆(μ-Ph₂PCH₂PPh₂) (2) with PhCCPCy₂ (3). Combination of 4 and Pd(OAc)₂ (1:1) gave an active catalyst for the palladium-catalyzed Suzuki coupling of aryl bromides with phenylboronic acid; the catalytic reactions can be performed even under low catalyst loadings (0.1-0.001 mol% 4/Pd(OAc)₂). Compound 4 has been proved to be an authentic and effective mono-dentate phosphine ligand. Crucial factors such as 4/Pd(OAc)₂ ratio, base being used, solvent volume, temperature, and electronic variation of the aryl bromides in reactions were also investigated and results are reported.     

Palladium-catalysed direct 3- or 4-arylation of thiophene derivatives using aryl bromides

The palladium-catalysed direct 3- or 4-arylation of 2,5-disubstituted thiophenes using aryl bromides gives a simple access to a variety of 3- or 4-arylthiophene derivatives. Moderate to good yields of 3-arylated thiophenes were obtained using 2,5-dimethylthiophene. In the presence of unsymmetrically disubstituted, 2-acetyl-5-methylthiophene, a regioselective arylation on carbon 4 of thiophene was observed. This reaction provides only HX associated to the base as by-product and reduces the number of steps to prepare these compounds.