Immobilization of trypsin in polyaniline-coated nano-Fe3O4/carbon nanotube composite for protein digestion

In this report, a four-component nanocomposite, trypsin-immobilized polyaniline-coated Fe₃O₄/carbon nanotube composite, was synthesized for highly efficient protein digestion. Fe₃O₄ was deposited by the chemical coprecipitation of Fe²⁺ and Fe³⁺ in an alkaline solution containing carbon nanotubes (CNTs) to prepare nano-Fe₃O₄/CNT composite. Subsequently, polyaniline (PA) was assembled on the Fe₃O₄/CNT composite by the in situ polymerization of aniline in the presence of trypsin to obtain trypsin-immobilized PA/Fe₃O₄/CNT nanocomposite. The novel 1D superparamagnetic biomaterial has been characterized by TEM, SEM, XRD, and magnetometric analysis. The feasibility and performance of the unique magnetic biomaterial have been demonstrated by the tryptic digestion of bovine serum albumin, myoglobin, and lysozyme within 5 min. The digests were identified by MALDI-TOF MS with sequence coverages that were comparable to those obtained from the conventional in-solution tryptic digestion. The present biocomposite offers considerable promise for protein analysis due to its high magnetic responsivity and excellent dispersibility. It can be easily isolated from the digests with the aid of an external magnetic field. Because the enzyme-immobilized nanocomposite can be prepared by a simple two-step deposition approach at low cost, it may find a wide range of biological applications including proteome research.     

Fe3O4 MNPs-DETA/Benzyl-Br3: A new magnetically reusable catalyst for the oxidative coupling of thiols

We report a new strategy to immobilize a bromine source on the surface of magnetic Fe₃O₄ nanoparticles (Fe₃O₄ MNPs-DETA/Benzyl-Br₃) leading to a magnetically recoverable catalyst, which exhibits high catalytic efficiency in oxidative coupling of thiols to the disulfides (89–98%). The Fe₃O₄ MNPs-DETA/Benzyl-Br₃ catalyst was fabricated by anchoring 3-chloropropyltrimethoxysilane (CPTMS) on magnetic Fe₃O₄ nanoparticles, followed with N-benzylation and reaction with bromine in tetrachloridecarbon. The resulting nanocomposite was analyzed by a series of characterization techniques such as FT-IR, SEM, TGA, VSM and XRD. The catalyst could be recovered via magnetic attraction and could be recycled at least 5 times without appreciable decrease in activity.     

Synthesis and Magnetic Properties of Pt3Co/Fe3O4 Nanocomposites

Bimagnetic Pt₃Co/Fe₃O₄ nanocomposite is synthesized in aqueous solution. The nanoparticles are characterized with TEM, FTIR, and magnetic measurements. The as‐synthesized nanocomposite exhibits ferromagnetic properties at room temperature due to the exchange coupling between Pt₃Co and Fe₃O₄. Magnetic properties of Pt₃Co/Fe₃O₄ nanoparticle can be tuned by varying of the molar ratio of iron to platinum. Pt₃Co/Fe₃O₄ nanoparticles exhibit higher saturation magnetization when the molar ratio of iron to platinum is 1.     

Ultrasonic-assisted synthesis of PMMA/Ni0.5Zn0.5Fe2O4 nanocomposite in mixed surfactant system

PMMA/Ni_0.5Zn_0.5Fe₂O₄ nanocomposite with superparamagnetic behavior was synthesized by in situ emulsion polymerization of methylmethacrylate (MMA) monomer in the presence of Ni_0.5Zn_0.5Fe₂O₄ colloidal suspension assisted by ultrasonic irradiation. The obtained samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM). XRD and FT-IR spectra confirmed the formation of PMMA/Ni_0.5Zn_0.5Fe₂O₄ nanocomposite. TEM images showed that Ni_0.5Zn_0.5Fe₂O₄ nanoparticles with the particle sizes of about 12 nm were well dispersed in the polymer matrix. The nanocomposite at room temperature exhibited superparamagnetic behavior under applied magnetic field. The formation mechanism of PMMA/Ni_0.5Zn_0.5Fe₂O₄ nanocomposite was proposed as well.     

Facile synthesis of multifunctional attapulgite/Fe3O4/polyaniline nanocomposites for magnetic dispersive solid phase extraction of benzoylurea insecticides in environmental water samples

In this study, the superparamagnetic attapulgite/Fe₃O₄/polyaniline (ATP/Fe₃O₄/PANI) nanocomposites were successfully synthesized by a one-pot method. Fe (III) was applied as both the oxidant for the oxidative polymerization of aniline and the single iron source of Fe₃O₄ formed by the redox reaction between aniline and Fe (III). The ATP/Fe₃O₄/PANI was used as sorbent for magnetic dispersive solid phase extraction (MDSPE) of benzoylurea insecticides (BUs) in environmental water samples. The as-prepared nanocomposite sorbents were characterized by Fourier transform infrared spectra (FT-IR), X Ray diffraction (XRD), scanning electron microscopy(SEM), transmission electron microscopy (TEM), and vibrating sample magnetometry. Various experimental parameters affecting the ATP/Fe₃O₄/PANI-based MDSPE procedure, including the composition of the nanocomposite sorbents, amount of ATP/Fe₃O₄/PANI nanocomposites, vortex time, pH, and desorption conditions were investigated. Under the optimal conditions, a good linearity was observed for all target analytes, with correlation coefficients (r²) ranging from 0.9985 to 0.9997; the limits of detection (LOD) were in the range of 0.02–0.43 μg L⁻¹, and the recoveries of analytes using the proposed method ranged between 77.37% and 103.69%. The sorbents exhibited an excellent reproducibility in the range of 1.52–5.27% in extracting the five target analytes. In addition, the intra-day and inter-day precision values were found to be in the range of 0.78–6.86% and 1.66–8.41%, respectively. Finally, the proposed ATP/Fe₃O₄/PANI-based MDSPE method was successfully applied to analyze river water samples by rapid preconcentration of BUs.     

Fe3O4–SiO2 nanocomposites obtained via alkoxide and colloidal route

The magnetic nanocomposite materials represent an important class of nanomaterials extensively studied nowadays due to their varied applications from medical diagnostic to storage information. The iron oxides in silica matrix systems are highly investigated. The sol-gel method is a suitable way of preparation of Fe₃O₄-SiO₂ nanocomposite materials, since this method allowed the preparation of nanocomposite materials with narrow size distribution of magnetite in silica matrix. In the present work, nanocomposite materials in the Fe₃O₄-SiO₂ system were prepared by sol-gel method via alkoxide and aqueous route. As SiO₂ sources, tetraethoxysilan (TEOS) for the alkoxide route, as well as silica sol Ludox (30%) for the aqueous route, were used. This study shows the influence of the type of silica matrix on the structure, size, and distribution of the Fe₃O₄ nanoparticles in the Fe₃O₄-SiO₂ systems. The gels were annealed at 550°C in order to consolidate the matrices. The structural characterization of the obtained materials via the two preparation routes was performed by DTA/TGA analysis, X-ray diffraction, IR and Mössbauer spectroscopy, Transmission Electron Microscopy (TEM) and Selected Area Electron Diffraction (SAED).     

一锅法制备S型异质结光催化剂Fe2O3/Fe2TiO5及其高效降解有机污染物性能

首次采用简单的一锅法制备了Fe₂O₃/Fe₂TiO₅异质结纳米材料。构建S型异质结后,与纯的Fe₂O₃和Fe₂TiO₅相比,Fe₂O₃/Fe₂TiO₅复合材料表现出更高的光催化降解速率和效率。经过2.5 h的光照后,Fe₂O₃/Fe₂TiO₅可以降解接近100%的亚甲基蓝（MB）。在Fe₂O₃/Fe₂TiO₅复合材料中,Fe₂O₃和Fe₂TiO₅之间形成了内建电场,可以促进光生电子-空穴对的分离。因此,具有更高能量的Fe₂TiO₅导带中的电子和具有更高能量的Fe₂O₃价带中的空穴可以得到有效的保留,从而使它们更加有效地扩散到催化剂表面,并参加降解反应。此外,Fe₂O₃/Fe₂TiO₅复合材料具有很好的光催化稳定性。     

Kinetics of Synthesis of Ba1.0Co0.7Fe0.2Nb0.1O3-δ through Solid-Solid Reaction

The mechanism of solid-solid reaction between BaCO₃ and Co₃O₄/Fe₂O₃/Nb₂O₅ has been investigated by means of non-isothermal thermogravimetry and differential scanning calorimetry (DSC) under flowing air gas conditions at atmospheric pressure with a new solid-solid reaction model. The effects of high speed agitating mixing and ball-milling mixing processes on the synthesis kinetics were also studied. The synthesis kinetics of Ba_1.0Co_0.7Fe_0.2Nb_0.1O_3-δ from the BaCO₃ and Co₃O₄/Fe₂O₃/Nb₂O₅ particles was calculated by applying the modified model. The results indicated that the overall reaction process was considered involving two stages: addition reaction between BaCO₃ and Co₃O₄/Fe₂O₃/Nb₂O₅ particles in the first stage and solution reaction between BaCoO₃, BaFeO₃, and BaNbO₃ to form a homogeneous Ba_1.0Co_0.7Fe_0.2Nb_0.1O_3-δ phase in the second stage. The new model matched well with the experimental data. The apparent activation energy of addition reaction stage of the high speed agitating mixing sample was estimated to be 376.76 kJ·mol⁻¹, which was only 3/4 of that of the ball-milling mixing sample (494.76 kJ·mol⁻¹). These results indicated that the high-speed agitating process could enhance atomic diffusion and facilitate the subsequent reaction, thus it is believed as a more effective, energy saving, and environmentally benign mixing process.     

可回收Fe3O4@SiO2-Ag磁性纳米微球对染料污染物的快速脱色处理

介绍了一种采用无毒廉价的前驱物制备Fe₃O₄@SiO₂-Ag磁性纳米微球的快捷方法,制备的Fe₃O₄@SiO₂-Ag纳米微球在NaBH₄存在下可以催化还原染料污染物.实验结果表明,Fe₃O₄@SiO₂-Ag磁性纳米粒子保持了Ag纳米粒子和Fe₃O₄纳米粒子的双重优点,不仅对染料罗丹明B和曙红Y具有良好的催化还原效率,而且可以在外加磁场作用下从溶液中快速有效的分离.催化还原反应速率与反应温度及Fe₃O₄@SiO₂-Ag催化剂用量有关,反应体系中表面活性剂和无机盐(Na₂SO₄)的存在也会影响催化剂的催化活性.该Fe₃O₄@SiO₂-Ag磁性纳米粒子在工业染料污染物处理方面具有应用前景.     

单分散Fe_3O_4亚微米球的合成与表征

采用溶剂热法制备出具有尺寸可调、分散性好、亲水性和超顺磁性的亚微米Fe3O4磁球,并考察了不同表面活性剂、反应时间和反应温度的影响。分别采用XRD、FE-SEM、FTIR、超导量子干涉仪(SQUID)对其结构、形貌、表面性质及磁性进行了表征。结果表明,产物为立方结构、具有单分散性的Fe3O4亚微米球,粒径在140~360nm可调。所得Fe3O4亚微米球在室温条件下的磁滞回线表现出超顺磁性,矫顽力为零。不同表面活性剂对粒径大小和磁饱和强度有一定的影响,但对其形貌和晶相结构无影响。随着反应时间的延长和反应温度的提高,颗粒粒径有逐渐减小的趋势。     

钛铁矿制备二氧化钛-四氧化三铁复合材料及其光催化应用

TiO_2因具有多种优异的特性被广泛应用在半导体光催化领域,但是纳米结构的TiO_2颗粒细微,在进行光催化反应之后,难以回收再利用。本文以廉价钛铁矿为原料制备光催化剂TiO_2,同时利用副产物铁合成Fe_3O_4,并采用简单温和的浸渍法制备Fe_3O_4/TiO_2磁性复合材料。通过XRD、FT-IR、SEM、EDS等手段对材料形态结构进行表征分析,并以光降解有机污染物若丹明B为探针反应,考察其光催化性能。结果表明,质量比为1∶10的Fe_3O_4/TiO_2复合材料结构稳定、分散均匀,具有最优的光催化活性(波长356nm下反应3h,若丹明B降解率达到64.0%),并表现出良好的重复性。同时,动力学结果显示降解符合一级反应动力学。     

超声法制备Au/Fe3O4及其催化还原4-硝基苯酚性能

通过简易的超声法以及原位还原法成功制备出了负载型可再生Au/Fe₃O₄催化剂。利用3-氨丙基三乙氧基硅烷（APTES）作为有机桥键,将Au固定在Fe₃O₄的表面,得到单分散磁性Au/Fe₃O₄。Au⁰在氨基的作用下不会团聚,因此具有较高的催化活性及稳定性。XRD、HRTEM、EDS和XPS等测试结果表明Au/Fe₃O₄已被成功制备。将其用于催化还原4-硝基苯酚得到4-氨基苯酚,表现出较高的催化活性,速率常数可达0.225 6 min^-1。重复性实验表明该催化剂具有良好的稳定性,反应9个循环之后,催化还原反应的转化率仍可达到94%。     

超声法制备Au/Fe_3O_4及其催化还原4-硝基苯酚性能

通过简易的超声法以及原位还原法成功制备出了负载型可再生Au/Fe_3O_4催化剂。利用3-氨丙基三乙氧基硅烷(APTES)作为有机桥键,将Au固定在Fe_3O_4的表面,得到单分散磁性Au/Fe_3O_4。Au0在氨基的作用下不会团聚,因此具有较高的催化活性及稳定性。XRD、HRTEM、EDS和XPS等测试结果表明Au/Fe_3O_4已被成功制备。将其用于催化还原4-硝基苯酚得到4-氨基苯酚,表现出较高的催化活性,速率常数可达0.225 6 min~(-1)。重复性实验表明该催化剂具有良好的稳定性,反应9个循环之后,催化还原反应的转化率仍可达到94%。     

Controlled assembly of superparamagnetic iron oxide nanoparticles on electrospun PU nanofibrous membrane: A novel heat-generating substrate for magnetic hyperthermia application

A facile method of fabricating novel heat-generating membranes composed of electrospun polyurethane (PU) nanofibers decorated with superparamagnetic iron oxide nanoparticles (NPs) is reported. Electrospinning was used to produce polymeric nanofibrous matrix, whereas polyol immersion technique allowed in situ assembly of well-dispersed Fe₃O₄ NPs on the nanofibrous membranes without any surfactant, and without sensitizing and stabilizing reagent. The assembly phenomena can be explained by the hydrogen-bonding interactions between the amide groups in the PU matrix and the hydroxyl groups capped on the surface of the Fe₃O₄ NPs. The prepared nanocomposite fibers showed acceptable magnetization value of 33.12 emu/g, after measuring the magnetic hysteresis loops using SQUID. Moreover, the inductive heating property of electrospun magnetic nanofibrous membranes under an alternating current (AC) magnetic field was investigated. We observed a progressive increase in the heating rate with the increase in the amount of magnetic Fe₃O₄ NPs in/on the membranes. The present electrospun magnetic nanofibrous membrane may be a potential candidate as a novel heat-generating substrate for localized hyperthermia cancer therapy.     

IR-spectral investigation of the structure of glasses in the Fe2O3-V2O5 system

The structure of glasses in the Fe₂O₃-V₂O₅ system in the 0–50 mol% Fe₂O₃ range is studied by IR-spectroscopy. It is found that the introduction of Fe₂O₃ favours the transformation of the VO₅-groups into VO₄ ones. This effect may be shown with the aid of IR-spectra, owing to the fact that these glasses are characterized by two high-frequency bands at 1020 and 930 cm^–1. The first is determined by the vibrations of the short V=O nonbridging bonds in the VO₅-groups, while the second is assigned to the vibrations of the V—O-bonds in deformed VO₄-tetrahedra.

---

IR-spektroskopische Strukturuntersuchung von Gläsern des Systems Fe₂O₃-V₂O₅

Zusammenfassung Die Struktur von Gläsern des Systems Fe₂O₃-V₂O₅ in dem Bereich von 0–50 Molprozent Fe₂O₃ wurde mit Hilfe der IR-Spektroskopie untersucht. Zusatz von Fe₂O₃ begünstigt die Umwandlung der VO₅- in VO₄-Gruppen. Das kann in den IR-Spektren durch zwei Banden bei 1020 und 930 cm^–1 festgestellt werden. Die erste wird durch Schwingungen der kurzen V=O-Nichtbrücken-bindungen in den VO₅-Gruppen verursacht, die zweite wird auf Schwingungen der V—O-Bindungen in dem deformierten VO₄-Tetraeder zurückgeführt.

     

Thermal oxide synthesis and characterization of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanorods and Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanowires

Fe₃O₄ nanorods and Fe₂O₃ nanowires have been synthesized through a simple thermal oxide reaction of Fe with C₂H₂O₄ solution at 200–600°C for 1 h in the air. The morphology and structure of Fe₃O₄ nanorods and Fe₂O₃ nanowires were detected with powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The influence of temperature on the morphology development was experimentally investigated. The results show that the polycrystals Fe₃O₄ nanorods with cubic structure and the average diameter of 0.5–0.8 μm grow after reaction at 200–500°C for 1 h in the air. When the temperature was 600°C, the samples completely became Fe₂O₃ nanowires with hexagonal structure. It was found that C₂H₂O₄ molecules had a significant effect on the formation of Fe₃O₄ nanorods. A possible mechanism was also proposed to account for the growth of these Fe₃O₄ nanorods. Supported by the Fund of Weinan Teacher’s University (Grant No. 08YKZ008), the National Natural Science Foundation of China (Grant No. 20573072) and the Doctoral Fund of Ministry of Education of China (Grant No. 20060718010)     

纳米Fe_3O_4及钴离子掺杂Fe_3O_4:有机碱共沉淀制备和磁性质

以有机碱四甲基氢氧化铵(TMAH)为沉淀剂合成了纳米Fe3O4和Co2+掺杂的纳米Fe3O4粒子。分别讨论了碱用量,铁盐溶液浓度,反应温度,有机碱及PEG-4000的分散性等因素对纳米Fe3O4的形貌影响。结果表明,所合成的纳米Fe3O4为30nm左右的反尖晶石型面心立方结构,有机碱除了起沉淀剂作用,还能够提高纳米Fe3O4的分散性。本文还讨论了不同Co2+掺入量的纳米Fe3O4粒子的磁性质,结果表明Co2+掺杂的纳米Fe3O4粒子的矫顽力在不同掺入量的下有较大的改变。当Co2+掺入量为10.0%时,纳米Fe3O4的矫顽力达到最大值,为1628Oe。     

磁性纳米Pd/Fe3O4催化剂的制备及其在Heck反应中的应用

通过使用聚乙烯吡咯烷酮作为稳定剂,合成了磁性Pd/Fe₃O₄纳米颗粒催化剂。对该催化剂进行粉末X射线衍射、透射电子显微镜、感应耦合等离子体和磁性表征。将Pd/Fe₃O₄催化剂用于Heck反应,检测其催化性能。测试结果表明Pd纳米颗粒负载在Fe₃O₄纳米颗粒上,而且催化剂的尺寸<20 nm,并在Heck反应中表现了极好的催化性能。此外,催化剂可以通过磁场回收利用, 且催化活性没有显著的降低。     

Electrochemical Detection of Dopamine at Fe3O4/SPEEK Modified Electrode

Reported here is the design of an electrochemical sensor for dopamine (DA) based on a screen print carbon electrode modified with a sulphonated polyether ether ketone-iron (III) oxide composite (SPCE-Fe₃O₄/SPEEK). L. serica leaf extract was used in the synthesis of iron (III) oxide nanoparticles (Fe₃O₄NPs). Successful synthesis of Fe₃O₄NP was confirmed through characterization using Fourier transform infrared (FTIR), ultraviolet–visible light (UV–VIS), X-ray diffractometer (XRD), and scanning electron microscopy (SEM). Cyclic voltammetry (CV) was used to investigate the electrochemical behaviour of Fe₃O₄/SPEEK in 0.1 M of phosphate buffer solution (PBS) containing 5 mM of potassium ferricyanide (III) solution (K₃[Fe(CN)₆]). An increase in peak current was observed at the nanocomposite modified electrode SPCE-Fe₃O₄/SPEEK) but not SPCE and SPCE-Fe₃O₄, which could be ascribed to the presence of SPEEK. CV and square wave voltammetry (SWV) were employed in the electroxidation of dopamine (0.1 mM DA). The detection limit (LoD) of 7.1 μM and 0.005 μA/μM sensitivity was obtained for DA at the SPCE-Fe₃O₄/SPEEK electrode with concentrations ranging from 5–50 μM. LOD competes well with other electrodes reported in the literature. The developed sensor demonstrated good practical applicability for DA in a DA injection with good resultant recovery percentages and RSDs values.     

空心结构磁性固体碱催化剂Fe3O4@LDO的制备与性能

基于水滑石类化合物的复合氧化物(LDO)是一类性能优异的固体碱催化剂,对其进行改性和功能化引起了越来越多的关注。本文将空心结构和Fe_3O_4引入到镁铝复合氧化物中,制备了一种空心结构磁性固体碱催化剂Fe_3O_4@LDO。这种空心结构磁性固体碱催化剂粒子具有以镁铝复合氧化物为壳层,空心Fe_3O_4为核的核壳结构。由于其独特的空心结构,Fe_3O_4@LDO粒子的悬浊液具有良好的稳定性,将其应用于催化Knoevenagel缩合反应,达到平衡后苯甲醛的转化率约为62%,显示出较好的催化性能。同时,Fe_3O_4@LDO粒子具有较强的磁性,非常方便分离与回收,是一种性能优良的磁性固体碱催化剂。