Synthesis and Spectral Characterization of Related Substances of Lacidipine,an Antihypertensive Drug

Five related substances (impurities) were detected in lacidipine bulk drug substance by a simple high-performance liquid chromatographic method (HPLC) and were identified by liquid chromatography–mass spectrometry (LC-MS). These related substances were independently synthesized, characterized, and co-injected with the sample containing impurities.     

Synthesis and Spectral Characterization of Related Substances of Vardenafil,an Erectile Dysfunction Drug

Abstract

Vardenafil hydrochloride trihydrate (Levitra) is used to treat erectile dysfunction (ED) and is an inhibitor of phosphodiesterase type 5 (PDE-5) enzyme. It maintains higher levels of cyclic guanosine monophosphate (cGMP), relaxes smooth muscles, promotes penile blood flow, and enhances erectile function. During the bulk drug synthesis of vardenafil hydrochloride trihydrate, six related substances (impurities), vardenafil dimer, vardenafil N-oxide, vardenafil glycene, vardenafil oxopiperazine, vardenafil oxoacetic acid, and phenyl vardenafil were identified, and these are reported herein for the first time. The present work describes the synthesis and characterization of these impurities.     

Synthesis and Characterization of Photocatalytic Porous Fe3+/TiO2 Layers on Glass

Wet chemical synthesis and preliminary photocatalytical characteristics of titania and Fe(III)-containing TiO₂ layers are presented. A highly stable coating colloids could be prepared under base- as well as acid-catalyzed condensation conditions. Structural properties of the as-prepared wet gels and sintered films were investigated using SEM, TEM, XRD as well as optical absorption spectroscopy, DTA-TG analysis and photomineralisation studies. X-ray amorphous wet titania gel layers start to crystallize at 500°C forming the characteristic anatase phase. In the presence of iron ions (Fe/Ti = 1), nanocrystalline FeTiO₃ ilmenite phase forms. Both TiO₂ and Fe-containing TiO₂ films demonstrate a photocatalytic activity in the process of the photomineralization of dichloroacetic acid.     

Perimedine-linked rhodamine dye in visual sensing of Al3+, Fe3+ and Fe2+ ions in aqueous organic medium under different experimental conditions

ABSTRACT

Perimedine labelled rhodamine dye 1 has been designed and synthesised. Metal ion binding studies of 1 have been performed in CH₃CN/H₂O (3:1, v/v, 10 mM Tris-HCl buffer, pH = 6.90). Compound 1 senses multiple metal ions such as Al³⁺, Fe³⁺ and Fe²⁺ by exhibiting turn on fluorescence and colour change (colourless to pink) under different experimental conditions. Concentration variation distinguishes Al³⁺ from Fe³⁺ ion. At low concentration (c = 1 x 10^?4 M), only Al³⁺ ion can exhibit turn on fluorescence with sharp colour change. Sensing of Fe²⁺ ion through turn on fluorescence and colour change has been possible via in situ oxidation by following Fenton’s reaction.     

铽(Ⅲ)、铕(Ⅲ)-1-环丙基-6-氟-7(1-哌嗪基)1、4-二氢-4-氧喹啉-3-羧酸-乙酰丙酮三元固体荧光配合物的合成与光谱表征

Two ternary solid complexes， Tb³⁺ (Eu³⁺)-ciprofloxacina-acetylacetone， have been synthesied and chara-cterized by elemental analysis， IR. Ciprofloxacina is one kind of bacteriophage containing α-carbonyl carboxylic acid configurayion and acetylacetone contains β-diketonate configurayion. They are the ideal ligands for Tb³⁺ and Eu³⁺. The fluorescence spectra of Tb³⁺ and Eu³⁺ complexes showed that the ligands were suitable for efficient energy transfer from ligands to the Tb³⁺ or Eu³⁺ ion with a high fluorescence quantum yield， large stoke shift， narrow emission bonds and large fluorescence lifetime. So the complexes were the new kind of solid fluorescence materials. Moreover， the mechanisms of the fluorescence of Tb³⁺ (Eu³⁺)-ciprofloxacina-acetylacetone ternary solid complex were investigated.     

Synthesis and crystal structure of monoclinic Fe2(SeO4)3

Summary Crystals of monoclinic Fe₂(SeO₄)₃ were synthesized under hydrothermal conditions. The structure was determined by single crystal X-ray methods and refined in space group P2₁/n with 2 646 independent reflections (sin /<0.7 Å^–1) toR=0.033,R _w=0.037:a=8.530 (2) Å,b=8.888 (2) Å,c=11.952 (2) Å, =91.13 (1)°,V=906.0 ų,Z=4. The crystal structure is isotypic with the monoclinic modification of Fe₂(SO₄)₃, containing two different Fe(III) and three Se(VI) atomic positions. The FeO₆ and SeO₄ polyhedra are only slightly distorted, the mean Fe-O bond lengths are 1.986 Å and 2.004 Å, the average distances within the SeO₄ tetrahedra are each 1.628 Å. The isolated FeO₆ octahedra only share corners with SeO₄ tetrahedra to build a framework structure.

---

Synthese und Kristallstruktur von monoklinem Fe₂(SeO₄)₃

Zusammenfassung Kristalle von monoklinem Fe₂(SeO₄)₃ wurden unter Hydrothermalbedingungen gezüchtet. Die Struktur wurde mit Einkristall-Röntgenmethoden bestimmt und in der Raumgruppe P2₁/n mit 2 646 unabhängigen Reflexen (sin /<0.7Å^–1) aufR=0.033,R _w=0.037 verfeinert:a=8.530(2) Å,b=8.888(2) Å,c=11.952(2) Å, =91.13(1)°,V=906.0 ų,Z=4. Die Kristallstruktur ist isotyp mit der monoklinen Modifikation von Fe₂(SO₄)₃, sie enthält zwei unterschiedliche Fe(III) und drei Se(VI) Atompositionen. Die FeO₆-Polyeder sind nur gering verzerrt, die mittleren Fe-O Bindungslängen sind 1.986 Å und 2.004 Å, die mittleren Abstände in den SeO₄-Tetraedern sind jeweils 1.628 Å. Die isolierten FeO₆-Oktaeder sind nur über gemeinsame Ecken mit SeO₄-Tetraedern verbunden, wobei eine Gerüststruktur entsteht.

     

A new lawsone azo-dye for optical sensing of Fe3+ and Cu2+ and their DFT study

A new lawsone-based azo-dye 2-hydroxy-3-((pyridin-2-ylmethyl)diazenyl)naphthalene-1,4-dione (1) was synthesized and applied for sensing of metal ions. Receptor 1 showed selective fluorescent and colorimetric response for the detection of Cu²⁺ and Fe³⁺ over other tested metal ions. The fluorescence intensity of 1 was significantly quenched allowing detection of Fe³⁺ and Cu²⁺ down to 0.61 and 6.06 μM, respectively. The binding has been established by fluorescence spectroscopic method. Receptor 1 provided a 1?:?1 binding scaffold for recognition of Fe³⁺ and Cu²⁺ ions with the association constant of 3.33 × 10⁶ and 3.33 × 10⁵ M^?1, respectively. The B3LYP/6-31G/LANL2DZ method was employed for the optimization of 1 and 1·Fe³⁺ and 1·Cu²⁺.     

Highly efficient adsorption of Cr(VI) from aqueous solution by Fe3+ impregnated biochar

Biochar (BC) has been widely used as a low-cost adsorbent for the removal of contaminants from water and soil. However, the adsorption ability of BC towards heavy metal oxyanions (e.g., Cr(VI)) is relatively low due to the negatively charged surface of BC. In this study, pristine BC was impregnated with Fe³⁺ to improve its Cr(VI) adsorption capability. Fe³⁺-impregnated BC (Fe³⁺-BC) was successfully synthesized by a simple impregnation method and used for the removal of Cr(VI) from aqueous solution. Various factors affecting the adsorption, such as impregnation ratio, pH, adsorbent dosage, contact time, temperature, and the presence of humic acid, were investigated in detail. Results showed that Fe³⁺-BC had strong adsorption ability to Cr(VI) with a maximum adsorption capacity of 197.80 mg/g, which were not only significantly higher than that of the pristine BC, but also were superior to many previously reported adsorbents. It was favorable for Cr(VI) adsorption under the condition of acidic and high temperature. The adsorption data obeyed Sips and Langmuir isotherms and the kinetic data were well described by the pseudo-first-order kinetic model. The results herein revealed that the Fe³⁺-impregnated BC had a good potential as a highly efficient material for adsorption of Cr(VI) from aqueous solution.     

Preparation and characterization of nylon 6/Cu2+-exchanged and Fe3+-exchanged montmorillonite nanocomposite

Nylon 6/Cu²⁺-exchanged and Fe³⁺-exchanged montmorillonite nanocomposites have been prepared by a melt intercalation technique directly from Cu²⁺-exchanged and Fe³⁺-exchanged montmorillonite. Hexadecyltrimethylammonium bromide was chosen as the clay/matrix reactive compatibilizer. The intercalation spacing and the degree of dispersion were determined by X-ray diffraction and transmission electron microscopy. Also the thermal character of the nanocomposites prepared was analyzed by thermogravimetric analysis.     

Comparative study for N and S doped carbon dots: Synthesis,characterization and applications for Fe probe and cellular imaging

A facile and eco-friendly approach to prepare nitrogen(N)- and sulfur(S)-doped carbon dots (CDs) by one step microwave-assisted pyrolysis of the precursors with dl-malic acid as carbon source, ethanolamine and ethane-sulfonic acid as N and S dopants, respectively, was reported. Through the extensive investigation on morphology, chemical structures and optical properties of the carbon dots, it was found that the obtained CDs exhibited good luminescence stability, high resistance to photo bleaching and favorite solubility. Compared with undoped CDs, adding the N or S dopant could give rise to a slightly smaller particle size and a long fluorescence lifetime of CDs. Moreover, the optimal N-CDs was successfully employed as good multicolor cell imaging probes due to its fine dispersion in water, excitation-dependent emission, excellent biocompatibility and low toxicity. Besides, such N-CDs showed a wide detection range and excellent accuracy as fluorescent probe for Fe³⁺ ions. This probe enabled the selective detection of Fe³⁺ ions with a linear range of 6.0–200 μM and a limit of detection of 0.80 μM.     

Novel naphthalene-based fluorescent chemosensors for Cu2+ and Fe3+ in aqueous media

Three novel compounds bearing 2,7-dihydroxylnaphthalene capable of detecting Cu²⁺ or Fe³⁺ have been synthesised based on photoinduced electron transfer. The ability of these compounds for complex transition metal ions has been studied, and complex stoichiometry for Cu²⁺ and Fe³⁺ complex has been determined in the Tris–HCl (0.01 M DMSO/H₂O (v/v) 1:1, buffer, pH 7.4) solution system by fluorescence titration experiments. These chemosensors form a 1:1 complex with Cu²⁺ or Fe³⁺ and show a fluorescent quenching with a binding constant of (4.46 ± 0.29) × 10³ and (8.04 ± 0.26) × 10⁴, respectively.     

Study on the synthesis of novel fluorescent macrocyclic sensors and their sensitive properties for Cu2+ and Fe3+ in aqueous solution

In this work, we synthesised and characterised three novel fluorescence macrocyclic sensors containing optically active dansyl groups. The studies for the interaction of the synthesised compounds with various mental ions (Li⁺, Na⁺, K⁺, Ag⁺, Mg²⁺, Ca²⁺, Ba²⁺, Pb²⁺, Zn²⁺, Co²⁺, Cd²⁺, Hg²⁺, Ni²⁺, Cu²⁺, Mn²⁺, Cr³⁺, Al³⁺, Fe³⁺) were performed by fluorescence titration, Job’s plot, ESI-MS and DFT calculations. The results showed that the sensors 1a–1c displayed selective recognition for Cu²⁺ and Fe³⁺ ions and formed stoichiometry 1:1 complex through PET mechanism in DMSO/H₂O solution (1:1, v/v, pH 7.4 of HEPES). The binding constant (K) and detection limit were calculated.     

A New Coumarin-Acridone Compound as a Fluorescence Probe for Fe3+ and Its Application in Living Cells and Zebrafish

A new coumarin-acridone fluorescent probe S was designed and synthesized, and the structure was confirmed with ¹H/¹³C NMR spectrometry, single-crystal X-ray diffraction, and high-resolution mass spectrometry. This probe has high sensitivity and selectivity for Fe³⁺ over other testing metal ions at 420 or 436 nm in acetonitrile–MOPS (3-Morpholinopropanesulfonic Acid) buffer solution (20.0 μM, pH = 6.9, 8:2 (v/v)). Under physiological conditions, the probe displayed satisfying time stability with a detection limit of 1.77 µM. In addition, probe S was successfully used to detect intracellular iron changes through a fluorescence-off mode, and the imaging results of cells and zebrafish confirmed their low cytotoxicity and satisfactory cell membrane permeability, as well as their potential biological applications.     

Electrically induced fluorescence Fe sensing behavior of nanostructured Tiron doped polypyrrole

Nanostructured polypyrrole (PPy) film doped with Tiron was electrodeposited from aqueous solution on the surface of transparent electrode and used for sensitive, selective and rapid electrically controlled fluorescence detection of Fe³⁺ in aqueous media. The fluorescence intensity of PPy-Tiron film decreases linearly in the presence of Fe³⁺ by applying negative potential over a concentration range from 5.0 × 10⁻⁸ to 1.0 × 10⁻⁶ mol L⁻¹, with a relatively fast response time of less than 30 s at pH 7.4. The detection is not affected by the coexistence of other competitive metal ions such as Al³⁺, Ce³⁺, Tl³⁺, La³⁺, Bi³⁺, Cr²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺. The proposed electro-fluorescence sensor has a potential application to the determination of Fe³⁺ in environmental and biological systems. The fluorescent thin film sensor was also used as a novel probe for Fe³⁺/Fe²⁺ speciation in aqueous solution.     

Sustainable and Green Synthesis of Waste-Biomass-Derived Carbon Dots for Parallel and Semi-Quantitative Visual Detection of Cr(VI) and Fe3+

Carbon dot (CD)-based multi-mode sensing has drawn much attention owing to its wider application range and higher availability compared with single-mode sensing. Herein, a simple and green methodology to construct a CD-based dual-mode fluorescent sensor from the waste biomass of flowers of wintersweet (FW-CDs) for parallel and semi-quantitative visual detection of Cr(VI) and Fe³⁺ was firstly reported. The FW-CD fluorescent probe had a high sensitivity to Cr(VI) and Fe³⁺ with wide ranges of linearity from 0.1 to 60 µM and 0.05 to 100 µM along with low detection limits (LOD) of 0.07 µM and 0.15 µM, respectively. Accordingly, the FW-CD-based dual-mode sensor had an excellent parallel sensing capacity toward Cr(VI) and Fe³⁺ with high selectivity and strong anti-interference capability by co-using dual-functional integration and dual-masking strategies. The developed parallel sensing platform was successfully applied to Cr(VI) and Fe³⁺ quantitative detection in real samples with high precision and good recovery. More importantly, a novel FW-CD-based fluorescent hydrogel sensor was fabricated and first applied in the parallel and semi-quantitative visual detection of Cr(VI) and ferrous ions in industrial effluent and iron supplements, further demonstrating the significant advantage of parallel and visual sensing strategies.     

A selective turn-on fluorescent sensor for Fe and application to bioimaging

A novel compound FD1 was demonstrated as a turn-on fluorescent sensor for imaging of iron(III) ion in biological samples. Based on the spirolactam (nonfluorescence) to ring-open amide (fluorescence) equilibrium, FD1 exhibited high selectivity and sensitivity for Fe³⁺ over other metal ions. Moreover, fluorescent microscopy experiments further established that FD1 could be used for sensing Fe³⁺ within living cells.     

小肽的合成及其作为双功能螯合剂在诊断用放射性药物中的应用

采用液相合成方法,以很高的纯度和较高的收率合成了3个新的4肽化合物MAG3-Phe-OH,MAG3-Leu-OH和MAG3-Tyr-OH。它们在温和的条件下很容易用99mTc进行标记,并在体内外显示了很高的稳定性。标记物的兔子显象显示新的标记物与99mTc MAG3有不同的代谢途径,有可能对癌细胞有较好的亲合作用而用于肿瘤显像。     

Photo-Physical Properties of a New Norfloxacin-Containing Polymer for Protons and Fe3+ Sensing

A novel norlfoxacin-containing fluorescent polymer was synthesized via copolymerization of two derivatives of norfloxacin and methylmetacrylate (MMA). It could emit blue fluorescence in both the solution and film states. Fluorescence characteristics of the polymer as a function of pH were investigated in aqueous solution. The polymer solution showed weaker fluorescence between pH 5-9. When the pH of the solution was higher than 9 or lower than 5, stronger fluorescence could be seen. Responses of metal cations (Mn^{2 +}, Fe^{3 +}, Co^{2 +}, Ni^{2 +}, Cu^{2 +} and Zn^{2 +}) to the fluorescence intensity of this polymer were obtained that only Fe^{3 +} could quench efficiently the fluorescence intensity of the polymer in solution and film state. The results suggested the possibility that this newly synthesized compound might work as a polymeric sensor responding to water polluted by protons and Fe^{3 +}.     

Sonophotocatalytic activity of methyl orange over Fe(III)/TiO2

TiO₂ doped with Fe³⁺ was prepared by an impregnation technique and its sonophotocatalytic activity over methyl orange (MO) was investigated. The Fe/TiO₂ surface presented red shift to longer wavelength, resulting in a lower energy band gap. Fe loading of 0.1 wt% on TiO₂ provided the optimum degradation. The MO degradation rate constant under sonophotocatalytic conditions was 2.5 times higher than under photocatalytic conditions.     

Sensitive,Selective and Reliable Detection of Fe3+ in Lake Water via Carbon Dots-Based Fluorescence Assay

In this study, C-dots were facilely synthesized via microwave irradiation using citric acid and ethylenediamine as carbon precursors. The fluorescence emissions of the C-dots could be selectively quenched by Fe³⁺, and the degree of quenching was linearly related to the concentrations of Fe³⁺ presented. This phenomenon was utilized to develop a sensitive fluorescence assay for Fe³⁺ detection with broad linear range (0–250, 250–1200 μmol/L) and low detection limit (1.68 μmol/L). Most importantly, the assay demonstrated high reliability towards samples in deionized water, tap water and lake water, which should find potential applications for Fe³⁺ monitoring in complicated environments.