Rh(PPh3)3Cl/Tetrakis(Dialkylamino)Phosphonium Salts as Thermoregulated and Recyclable Catalytic System for Hydrosilylation Reaction

Abstract

Eleven tetrakis(dialkylamino)phosphonium salts have been prepared and were used as “soft” catalyst supports for the hydrosilylation reaction of styrene with triethoxysilane catalyzed by Rh(PPh₃)₃Cl. Among the Rh(PPh₃)₃Cl/tetrakis(dialkylamino)phosphonium salts tested, the best catalytic activity and selectivity in favor of the β-adduct were obtained when {[(C₄H₉)₂N]₃[(C₈H₁₇)₂N]P}PF₆ was used as the support, and Rh(PPh₃)₃Cl/ {[(C₄H₉)₂N]₃[(C₈H₁₇)₂N]P}PF₆ catalyst system can be reused more than 10 times without noticeable loss of catalytic activity and selectivity.

GRAPHICAL ABSTRACT      

Synthesis,characterization and luminescence of the tetranuclear gold cluster: [Au4{7,8-(PPh2)2-7,8-C2B9H10}2(PPh3)2]

A tetranuclear gold cluster has been synthesized by the reaction of [Au(PPh₃)NO₃] with the closo carborane diphosphine 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀ in THF, and characterized by elemental analysis, FT-IR, ¹H and ¹³C?NMR spectroscopy and X-ray structure determination. The cluster crystallizes in the triclinic Pī, a?=?15.118(8)?Å, b?=?16.057(9)?Å, c?=?24.284(13)?Å, α?=?80.822(9)°, β?=?79.624(8)°, γ?=?81.938(8)°, Z?=?2, R ₁?=?0.0626, wR ₂?=?0.1894. A single crystal structure determination showed that four gold atoms form a tetrahedral framework. Among these four gold atoms, two were chelated by two nido carborane diphosphine [7,8-(PPh₂)₂-7,8-C₂B₉H₁₀]^? anions coming from the degradation of the initial closo ligand 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀, while the other two were ligated to two PPh₃ groups. The luminescence of this cluster was also investigated in dichloromethane solution at room temperature.     

Reactivity of chlorinating agents/PPh3 for the chlorination of alcohols and carboxylic acids: a comparative study

The reactivity of chlorinating agents was examined with the aid of ¹H NMR using competitive reactions between selected chlorinating agents and CBr₄ towards alcohols and carboxylic acids. The reactivity was greatly dependent on the type of substituent on the chlorinating agents. COCCl₃ and CN substituted trichloromethyl groups enhanced the reactivity of the chlorinating agent with PPh₃ for the chlorination of alcohols and carboxylic acids.     

Phenoxide-assisted P-C bond cleavage in PdCl2(PPh3)2 under very mild conditions

PdCl₂(PPh₃)₂ reacted with NaOAr (Ar = Ph, p-tolyl) at 0 °C to afford PdCl(Ph)(PPh₃)₂, instead of PdCl(OAr)(PPh₃)₂, in 12-16% isolated yields based on Pd. The structure was confirmed by NMR and X-ray crystallography. GC-MS analysis of the reaction solution revealed that OPPh₂(OAr), OPPh(OAr)₂, and OP(OAr)₃ are formed, while NMR studies indicated that PdCl(Ph)(PPh₃)₂ is produced when PdCl(OAr)(PPh₃)₂ decomposes. The reaction of PdCl₂(PPh₃)₂ with Bu₃Sn(OC₆H₄-p-OMe) also gave PdCl(Ph)(PPh₃)₂ in 8% isolated yield. These results suggest that PdCl(OAr)(PPh₃)₂ is highly labile and the aryloxy ligand exchanges with the phenyl groups in triphenylphosphine even under very mild conditions.     

Mn2O3纳米结构的简易合成与电化学性质

用简易的室温或水热方法制备出不同形貌的MnCO₃微结构。经600 ℃热处理后,室温制备MnCO₃转变成Mn₂O₃胶体片,而水热制备MnCO₃样品则形成多孔Mn₂O₃纳米结构。然而,室温制备MnCO₃经120 ℃热处理后形成Mn₂O₃晶相。制备样品经过XRD和SEM表征表明,热处理MnCO₃前驱物形成Mn₂O₃过程导致产物形貌与结构变化。其形成机理又通过TEM和FTIR进一步研究。Mn₂O₃纳米结构的电容性质通过循环伏安法表征,结果表明Mn₂O₃形貌与结构对其电容有重要影响。     

一锅法快速制备PtCu3空心结构

以反式二氯二胺合铂（trans-PtCl₂（NH₃）₂）为Pt源,溴化亚铜（CuBr）为Cu源,在油胺（OAm）体系中采用一锅法快速制备得到笼状PtCu₃空心结构,同时用XRD,TEM,HRTEM和高角环形暗场扫描透射电子显微技术[HAADF-STEM,high angle annular dark field（HAADF）scanning transmissio nelectron microscopy（STEM）]。对产物的结构及形貌进行动态的,多角度的表征,所得PtCu₃空心结构对温度敏感,过高的温度会加快原子的扩散速率,导致空心结构坍塌。     

一锅法快速制备PtCu_3空心结构

以反式二氯二胺合铂(trans-PtCl2(NH3)2)为Pt源,溴化亚铜(CuBr)为Cu源,在油胺(OAm)体系中采用一锅法快速制备得到笼状PtCu3空心结构,同时用XRD,TEM,HRTEM和高角环形暗场扫描透射电子显微技术【HAADF-STEM,high angle annular dark field(HAADF)scanning transmission electron microscopy(STEM)】。对产物的结构及形貌进行动态的,多角度的表征,所得PtCu3空心结构对温度敏感,过高的温度会加快原子的扩散速率,导致空心结构坍塌。     

One-Pot Synthesis of 2,4,5-Trisubstituted Imidazoles Using MoO3/SiO2, an Efficient and Recyclable Catalyst

A simple one-pot synthesis has been developed for the synthesis of 2,4,5-trisubstituted imidazoles using an efficient and recyclable MoO₃/SiO₂ solid acid catalyst by condensation of benzil or benzoin, benzaldehyde, and ammonium acetate in acetonitrile as a solvent. Using this solid catalyst, the reactions could be carried out under mild reaction conditions with very good yield of imidazoles, up to 95%. This catalyst could be recycled very easily, which makes this methodology environmentally benign.     

A Convenient Synthesis of Novel Glycosyl Azetidines Under Mitsunobu Reaction Conditions

Abstract

A facile, simple, and high-yielding protocol for synthesis of novel glycosyl azetidines was developed from glycosyl β-amino alcohols via intramolecular cyclization under Mitsunobu reaction conditions.     

Cu2O/g-C3N4催化合成吲哚-2-羧酸酯

我们通过原位还原的方法将吸附在g-C3N4表面上Cu2+还原,制备出Cu2O/g-C3N4复合材料,并利用XRD、SEM、FT-IR、XPS等分析手段表征Cu2O/g-C3N4.表征结果显示:Cu元素主要以Cu2O的形式吸附在g-C3N4载体上.另外,还考察了Cu2O/g-C3 N4在“一锅法”合成吲哚-2-甲酸乙酯的反应中的催化性能.结果表明:即使在较低的催化担载量和温和的反应条件下,Cu2O/g-C3 N4仍能表现出良好的催化性能并获得44.1％的收率.     

Al2O3/MeSO3H (AMA) as a New Reagent for the Thia-Fries Rearrangement of Arylsulfonates to Hydroxyaryl Sulfones

A new facile method for thia-Fries rearrangement of arylsulfonates has been developed. A variety of arylsulfonates rearrange in excellent yields in the presence of Al₂O₃/MeSO₃H as a new reagent without the use of any solvent.     

A Mild and Efficient Method for Chlorination of Baylis–Hillman Adducts Using PPh3/Cl3CCONH2

A new and convenient stereoselective synthesis of (Z)‐2‐(chloromethyl)alk‐2‐enoates has been achieved from Baylis–Hillman adducts by treatment with PPh₃/Cl₃CCONH₂ at room temperature. The synthesis can proceed under mild and acid‐free conditions to form the products in high yields.     

A fast synthesis for Zintl phase compounds of Na3SbTe3, NaSbTe2 and K3SbTe3 by microwave irradiation

The microwave irradiation technique was used to prepare three Zintl phase compounds Na₃SbTe₃, NaSbTe₂ and K₃SbTe₃. The as-prepared products were analyzed and characterized by XRD, EDX and SEM techniques. Higher microwave oven power and shorter irradiation time are required for the synthesis of Na₃SbTe₃, whereas lower oven power and longer irradiation time are needed for NaSbTe₂. Moderate microwave irradiation conditions facilitate the formation of pure K₃SbTe₃. Pure phase of Na₃SbTe₃ are directly obtained by this technique for the first time. Compared with the traditional high-temperature solid-state synthesis, the microwave reaction required a considerable shortened reaction time for the preparation of the three Zintl compounds. The initial driving force for these reactions originates from the interaction of microwave electric field with alkali metals (Na and K) and Sb powders.     

单晶菱形CeOHCO3片状物的制备及其向CeO2的热转换

以硝酸铈铵和尿素为反应物,γ-氨丙基三乙氧基硅烷(KH550)为助剂,通过沉淀反应制得了单晶菱形CeOHCO3片状物。然后将CeOHCO3在600℃空气气氛中灼烧获得了菱形CeO2。通过XRD和SEM对反应物中是否含有KH550助剂所得的产物进行了分析,结果发现只有含有KH550才能获得菱形CeOHCO3片状物,并且在灼烧过程中产物的形貌仍保持菱形。然后采用TEM对菱形CeOHCO3和CeO2进行了表征,结果发现CeOHCO3为单晶产物而灼烧后所得的CeO2为多晶产物。     

Synthesis and characterization of MgF2 and KMgF3 nanorods

MgF₂ nanorods with diameters of 60-100 nm were synthesized by a microemulsion method. Subsequent hydrothermal reaction of as-synthesized MgF₂ nanorods and KF at 240°C for 3 days or 140°C for 7 days resulted in KMgF₃ nanorods, which retained the rod-like morphology of the source material MgF₂ in the reaction process. The morphology of as-synthesized MgF₂ strongly depended on the molar ratio between water and the surfactant CTAB and the concentration of CTAB.     

Direct dynamics studies for the reactions of CF3CHFCF3 and CF3CF2CHF2 with H atoms

The rate constants of the hydrogen abstraction reactions of CF₃CHFCF₃ + H (R1) and CF₃CF₂CHF₂ + H (R2) have been calculated by means of the dual-level direct dynamics method. Optimized geometries and frequencies of stationary points and extra points along the minimum-energy path (MEP) are obtained at the MPW1K/6-311+G(d,p) level, and the classical energetic information is further corrected with the interpolated single-point energy (ISPE) approach by the G3(MP2) level of theory. Using the canonical variational transition state theory (CVT) with small-curvature tunneling corrections (SCT), the rate constants are evaluated over a wide temperature range of 200-2000 K. The calculated CVT/SCT rate constants are in good agreement with available experimental values. It is found that the variational effect is very small and almost negligible over the whole temperature region. However, the small-curvature tunneling correction plays an important role in the lower temperature range. Furthermore, the heats of formation of species CF₃CF₂CHF₂ (SC₁ or SC₂) and CF₃CF₂CF₂ are studied using isodesmic reactions to further elucidate the thermodynamic properties.     

乙二醇辅助水热法制备不同形貌的CaTiO_3/CaTiO_3:Pr微晶

对乙二醇存在下水热法制备CaTiO3微晶的形貌进行了研究。对所得样品用X射线衍射、扫描电子显微镜(SEM)、热重分析及红外光谱(FTIR)进行了表征。结果表明,制备的CaTiO3微晶随着乙二醇和水配比的不同,可以形成立方体、三维十字架形及正十二面体等规整的外形。乙二醇在晶粒表面的配位吸附对这些不同形貌的形成有决定的作用。所得样品粒度分布均匀,基本不团聚。掺杂少量Pr3+离子后对样品的微观形貌基本不影响,在200℃低温水热获得的CaTiO3∶Pr样品就有明显的荧光和长余辉发光性能。样品在900℃煅烧后其外形并不发生变化,也不会团聚,但发光性质得到大幅度提高。     

碳包覆Li3V2(PO4)3:溶胶-凝胶法合成及性能

利用V₂O₅、LiOH·H₂O、H₂O₂、NH₄H₂PO₄与柠檬酸为原料,通过溶胶-凝胶法合成了碳包覆的Li₃V₂(PO₄)₃复合正极材料。采用XPS、XRD、SEM、TEM、拉曼光谱和电化学方法对材料的性能进行了研究。还研究了其结构与焙烧温度、样品电导率和电化学性能的关系。研究表明复合材料具有空间群为P2₁/n的单斜结构,表面包覆粗糙多孔的碳层。在800 ℃下制备的碳包覆样品的电子导电率高达9.81×10^-5 S·cm^-1,约为高温固相氢气还原法制备的未包覆碳Li₃V₂(PO₄)₃的10000倍。测试结果表明碳包覆Li₃V₂(PO₄)₃的电化学性能远优于未包覆碳的样品。在3.0～4.3 V电压范围内,以0.1C和2C倍率充放电时,碳包覆的Li₃V₂(PO₄)₃具有高比容量(分别为128和109 mAh·g^-1)和优异的循环性能。     

CuPy2Cl2: A Novel and Efficient Catalyst for Synthesis of Propargylamines Under the Conventional Method and Microwave Irradiation

CuPy₂Cl₂ is an efficient catalyst for the preparation of propargylamines via three-component coupling reaction of aromatic aldehydes, amines, and aromatic alkynes stirred at 95 °C without using any solvent to afford the corresponding products in good yields. The reaction mixture was irradiated at 450 W in a microwave oven to furnish the expected products in excellent yields.     

Cr2O3和CrO3/Cr2O3催化剂的2-氯-1,1,1-三氟乙烷气相氟化反应的活性物种和失活

采用沉淀法和浸渍法制备了2种铬基（Cr₂O₃和CrO₃/Cr₂O₃）催化剂,用于气相氟化2-氯-1,1,1-三氟乙烷合成1,1,1,2-四氟乙烷。研究发现含有低价铬（Cr³⁺）物种的Cr₂O₃催化剂上2-氯-1,1,1-三氟乙烷的稳态转化率为18.5%,而含有高价铬（Cr⁶⁺）物种和低价铬（Cr³⁺）物种的CrO₃/Cr₂O₃催化剂初始转化率达到30.6%,然而存在明显的失活。含有Cr⁶⁺物种的CrO₃/Cr₂O₃催化剂的2-氯-1,1,1-三氟乙烷氟化反应初始TOF值为1.71×10^-4 mol_HCFC-133a·mol_Cr（Ⅵ）^-1·s^-1,高于含有Cr³⁺物种的Cr₂O₃催化剂（4.16×10^-5 mol_HCFC-133a·mol_Cr（Ⅲ）^-1·s^-1）。Cr₂O₃催化剂在氟化反应前后催化剂的物相结构保持不变;而含有高价铬物种的CrO₃/Cr₂O₃催化剂经HF反应后生成了CrO_xF_y活性物种。然而,CrO_xF_y物种在反应中挥发或转化成稳定但无活性的CrF₃,从而导致催化剂失活。