Novel synthesis of aromatic polysulfides from S,S′-bis(trimethylsilyl)-substituted aromatic dithiols and activated aromatic dihalides

A new method for the synthesis of aromatic polysulfides has been developed by the polycondensation of S,S′-bis(trimethylsilyl)-substituted aromatic dithiols with activated aromatic dihalides. The solution polycondensation of three S-silylated aromatic dithiols with bis(4-chloro-3-nitrophenyl) sulfone afforded readily aromatic polysulfides having inherent viscosities of 0.7 dL/g, and the polymerization with bis(4-fluorophenyl) sulfone gave the polymers with viscosity values of 0.3 dL/g. The silylation method was compared advantageously with a conventional route using parent dithiols and activated aromatic dihalides.     

Reaction of 6-methoxybenzo[b]furan-3(2H)-one and benzo[b]thiophen-3(2H)-one with 2-aryl-1,1-dicyanoethylenes as a convenient synthetic route to substituted 2-amino-4-aryl-1,3-dicyano-7-methoxydibenzo[b,d]furans and 2-amino-4-aryl-3-cyano-4H-benzothieno[3,2-b]pyrans

The reactions of 6-methoxybenzo[b]furan-3(2H)-one with 2-aryl-1,1-dicyanoethylenes and malononitrile or with aromatic aldehyde and two moles of malononitrile afford 2-amino-4-aryl-1,3-dicyano-7-methoxydibenzo[b,d]furans. The reactions of benzo[b]thiophen-3(2H)-one with 2-aryl-1,1-dicyanoethylenes or with aromatic aldehyde and one mole of malononitrile produce 2-amino-4-aryl-3-cyano-4H-benzothieno[3,2-b]pyrans.     

A Regioselective Biginelli‐like Reaction Controlled by the Size of Alicyclic Mono‐ketones

A regioselective Biginelli‐like reaction of alicyclic mono‐ketones, aromatic aldehydes, and urea in ionic liquid [BPY]BF₄ has been investigated. The process is controlled by the size of alicyclic mono‐ketones and the steric hindrance of aromatic aldehydes. The reaction of cyclopentanone with urea and aromatic aldehydes afforded 7‐arylidene‐3,4,6,7‐tetrahydro‐4‐aryl‐1H‐cyclopenta[d]pyrimidin‐2(5H)‐ones ( 4 ). When cyclohexanone was used as the source of active methylene to react with urea and aldehydes with slight steric hindrance groups under the same condition, 8‐arylidene‐3,4,5,6,7, 8‐hexahydro‐4‐arylquinazolin‐2(1H)‐ones ( 6 ), a homologue of 4 , were yielded, whereas 4,8‐bisaryloc‐tahydro‐1H‐pyrimido[5,4‐i]‐quinazoline‐2,10(3H,11H)‐diones ( 7 ) were obtained via the simple one‐pot reaction of cyclohexanone, urea, and aromatic aldehydes with high steric hindrance groups. The possible transitional states and mechanism of the regioselective process were discussed.     

Uncatalyzed polymerization of bistriazolinediones with electron-rich aromatic compounds via electrophilic aromatic substitution

The reaction of 4-substituted-1,2,4-triazoline-3,5-diones(4R-TD's), i.e., MeTD(4-methyl substituted) and PhTD(4-Phenyl substituted) with electron rich aromatic compounds were investigated. N,N-Dimethylaniline undergoes reaction instantaneously with MeTD and PhTD. Electrophilic aromatic substitution occurred at room temperature at the para position without use of any catalyst. N,N,N′,N′-tetramethyl-m-phenylenediamine (TMPDA) undergoes reaction with 2 mol of PhTD and MeTD which lead to the formation of 2:1 adducts in high yields. These compounds were fully characterized by IR, ¹³C-NMR, ¹H-NMR and elemental analysis and were used as model compounds. The reaction of bistriazolinediones with TMPDA was performed in dimethylformamid at room temperature. The reactions are exothermic, fast, and gave novel polymer structures via electrophilic aromatic substitution. Some physical properties and structural characterization of these new polymers have been studied, and will be reported.     

基于1,2-二氢-2-(4-羧基苯基-4-[4-(4-羧基苯氧基)-3-甲基苯基](2H)二氮杂萘-1-酮的新型芳香聚酰胺的简易合成

A new monomer diacid, 1,2-dihydro-2-(4-carboxylphenyl)-4-[4-(4-carboxylphenoxy)-3-methylphenyl]phtha-lazin-1-one (3), was synthesized through the aromatic nucleophilic substitution reaction of a readily available unsymmetrical phthalazinone 1 bisphenol-like with p-chlorobenzonitrile in the presence of potassium carbonate in N,N-dimethylacetamide and alkaline hydrolysis. The diacid could be directly polymerized with various aromatic diamines 4a-4e using triphenyl phosphite and pyridine as condensing agents to give five new aromatic poly(ether amide)s 5a-5e containing the kink non-coplanar heterocyclic units with inherent viscosities of 1.30-1.54 dL/g.The polymers were readily soluble in a variety of solvents such as N,N-dimethylformamide (DMF), N,N-dimethyl-acetamide (DMA), dimethylsulfoxide (DMSO), N-methyl-2-pyrrolidinone (NMP), and even in m-cresol and pyridine (Py). The transparent, flexible and tough films could be formed by solution casting. The glass transition tem-peratures Tg were in the range of 286-317℃.     

Preparation and Properties of Novel Aromatic Polyamides from Diamines Containing 4,5-Imidazolediyl Structure

Novel aromatic polyamides were prepared from aromatic diamine containing 4,5-imidazolediyl unit, either by low temperature solution polycondensation or by direct polycondensation. Used diamines were 4,5-bis(4-aminophenyl)-2-phenylimidazole 1, 4,5-bis[4-(4-aminophenyl)]-2-(4-methylphenyl)imidazole 2 and 4,5-bis[4-(4-aminophenoxy)phenyl]-2-phenylimidazole 3. The obtained aromatic polyamides were produced with moderate to high inherent viscosity and soluble in polar aprotic solvents such as N,N-dimethylacetamide (DMAc), 1-methyl-2-pyrrolidone (NMP), N,N-dimethylformamide (DMF) and dimethyl sulfoxide (DMSO). Thermogravimetric analysis showed those polymers were stable up to 422°C in nitrogen atmosphere. The glass transition temperature (T _g)s of the polymers derived from diamine 3 were in the range between 243 and 275°C, and these values were approximately 120–160°C lower than those analogue polyamide I series containing no phenoxy units. The properties of polyamide I series are also compared with those of analogue polymers that order of aromatic nuclei and amide linkage is reversible.     

Reaction of Zinc Enolates of Alkyl Esters of Substituted 4-Bromo-3-Oxoalkanoic Acids with Aldehydes

Zinc enolates formed from ethyl 4-bromo-2,2,4-trimethyl-3-oxopentanoate react under the conditions of one- of two-stage synthesis with aliphatic, unsaturated, or aromatic aldehydes to form 6-R-2,2,4,4-tetramethyl-2,3,5,6-tetrahydropyran-2,4-diones. Zinc enolates obtained from ethyl 4-bromo-2,2-dimethyl-3-oxopentanoate, -hexanoate, and -2,2,5-trimethyl-3-oxohexanoate under the similar conditions react with aliphatic or aromatic aldehydes to give mainly 5-R¹-6-R²-3,3-dimethyl-2,3,5,6-tetrahydropyran-2,4-diones as E or Z isomers or their mixtures. Zinc enolates generated from the ethyl 4-bromo-2,2-diethyl- or 2-benzyl-2-ethyl-3-oxobutanoates react with aromatic aldehydes to give ethyl 5-R-2-R-2-ethyl-3-oxo-4-pentenoates as E isomers.     

An Amphoteric Switch to Aromatic and Antiaromatic States of a Neutral Air‐Stable 25π Radical

Ever since the discovery of the trityl radical, isolation of a stable and neutral organic radical has been a synthetic challenge. A (4n+1)π open‐shell configuration is one such possible neutral radical but an unusual state between aromatic (4n+2)π and antiaromatic (4n)π electronic circuits. The synthesis and characterization of an air‐ and water‐stable neutral 25π pentathiophene macrocyclic radical is now described. It undergoes reversible one‐electron oxidation to a 24π antiaromatic cation and reduction to a 26π aromatic anion, thus confirming its amphoteric behavior. Structural determination by single‐crystal X‐ray diffraction studies revealed a planar configuration for the neutral radical, antiaromatic cation, and aromatic anion. In the solution state, the cation shows the highest upfield chemical shift ever observed for a 4nπ system, while the anion adhered to aromatic nature. Computational studies revealed the delocalized nature of the unpaired electron as confirmed by EPR spectroscopy.     

Synthesis and properties of aromatic polyamides containing the cyclohexane structure

1,1-Bis[4-(4-carboxyphenoxy)phenyl]cyclohexane (III) and 1,1-bis[4-(4-aminophenoxy)phenyl]cyclohexane (V) were prepared in two main steps starting from the aromatic nucleophilic substitution of p-fluorobenzonitrile and p-chloronitrobenzene, respectively, with 1,1-bis(4-hydroxyphenyl)cyclohexane in the presence of potassium carbonate in N,N-dimethylformamide (DMF). Using triphenyl phosphite and pyridine as condensing agents, two series of polyamides with cyclohexylidene cardo groups were directly polycondensated from dicarboxylic acid III with various aromatic diamines or from diamine V with various aromatic dicarboxylic acids in an N-methyl-2-pyrrolidone (NMP) solution containing dissolved calcium chloride. The polyamides exhibited inherent viscosities in the range of 0.45 to 1.78 dL/g. Almost all of the polymers were readily soluble in polar aprotic solvents such as NMP and N,N-dimethylacetamide (DMAc) and could afford transparent, flexible, and tough films by solution casting. The glass transition temperatures (T_g) of these aromatic polyamides were in the range of 180–243°C by DSC, and the 10% weight loss temperatures in nitrogen and air were all above 450°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3575–3583, 1999     

Syntheses and properties of aromatic polyamides and polyimides based on N-phenyl-3,3-bis[4-(p-aminophenoxy) phenyl] phthalimidine

N-Phenyl-3,3-Bis[4-(p-aminophenoxy)phenyl] phthalimidine ( II ) was used as a monomer with various aromatic dicarboxylic acids and tetracarboxylic dianhydrides to synthesize polyamides and polyimides, respectively. The diamine II was derived by a nucleophilic substitution of N-phenyl-3,3-bis(4-hydroxyphenyl) phthalimidine with p-chloronitrobenzene in the presence of K₂CO₃ and then hydro-reduced. Polyamides IV _a-g having inherent viscosities of 0.55–1.64 dL/g were prepared by the direct polycondensation of the diamine II with various aromatic diacids using triphenyl phosphite and pyridine as condensing agents. All the aromatic polyamides were amorphous and readily soluble in various polar solvents such as N,N-dimethylacetamide (DMAc), N,N-dimethylformamide, dimethylsulfoxide, and N-methyl-2-pyrrolidone (NMP). Transparent and flexible films of these polymers could be cast from the DMAc solutions. These aromatic polyamides had glass transition temperatures in the range of 293–319°C and 10% weight loss occurred up to 480°C. The polyimides were synthesized from diamine II and various aromatic dianhydrides via the two-stage procedure that included ring-opening polyaddition in DMAc to give poly(amic acid)s, followed by thermal or chemical conversion to polyimides. Most of the aromatic polyimides obtained by chemical cyclization were found to be soluble in NMP, m-cresol, and o-chlorophenol. These polyimides showed almost no weight loss up to 500°C in air or nitrogen atmosphere. © 1994 John Wiley & Sons, Inc.     

Synthesis of Mixed Bisamides of Cyclic ortho-Dicarboxylic Acids

A procedure was developed for preparation of bisamides of cyclic ortho-dicarboxylic acids byacylation of m- or p-phenylenediamine in acetone solution at room temperature simultaneously with twodifferent anhydrides of cyclic or aromatic ortho-dicarboxylic acids; another process consisted in treating ananhydride of aromatic or cyclic dicarboxylic acid with monoamide of cis-4-cyclohexene-1'2-dicarboxylicacid in dimethylformamide at room temperature.     

An Efficient Synthesis of Optically Active trans‐(3R,4R)‐3‐Acetoxy‐4‐aryl‐1‐(chrysen‐6‐yl)azetidin‐2‐ones Using (+)‐Car‐3‐ene as a Chiral Auxiliary

An efficient enantioselective synthesis of 3‐acetoxy trans‐β‐lactams 7a and 7b via [2+2] cycloaddition reactions of imines 4a and 4b , derived from a polycyclic aromatic amine and bicyclic chiral acid obtained from (+)‐car‐3‐ene, is described. The cycloaddition was found to be highly enantioselective, producing only trans‐(3R,4R)‐N‐azetidin‐2‐one in very good yields. This is the first report of the synthesis of enantiomerically pure trans‐β‐lactams 7a and 7b with a polycyclic aromatic substituent at N(1) of the azetidin ring.     

Aromatic character of Oh-C24N24. A cavernous nitride fullerene bearing N4-macrocycle motifs

Spherical fullerenes offer noteworthy structures usually involving six- and five-membered faces, with application in technological issues. In this sense, cavernous spherical-like structures bearing larger holes provide interesting examples for further understanding of structure-properties relationship. Here, we explored the magnetic response of a proposed cavernous nitride fullerene, C₂₄N₂₄, which has a O_h-symmetry with six N₄-macrocyclic and eight 1,3,5-triazine faces displaying 48-π electrons. C₂₄N₂₄ exhibits a local aromatic behavior owing to the contrasting antiaromatic response of the N₄-macrocyclic faces and the aromatic character of the 1,3,5-triazine faces. Thus, the overall structure is ascribed as a local aromatic species, where the triazine faces exhibit the characteristic shielding cone for aromatic rings. Furthermore, the constructive combination of local shielding cones in C₂₄N₂₄ delivers a related shielding-cone response, as expected for a perfect aromatic cage. Hence, the local aromatic/nonaromatic/antiaromatic sections exhibit an additive or subtractive interaction, leading to a characteristic response inherent to the nature of the spherical cage. We expect that further study of the interplay between different aromatic and antiaromatic faces in fullerene-like cages can deliver interesting pseudo-aromatic or pseudo-antiaromatic spherical species.     

Preparation and properties of polyamides from 4-phenoxy- and 4-phenylthio-m-phenylenediamine and both aromatic and aliphatic diacids

New soluble aramids having pendant phenoxy and phenylthio groups were prepared in high molecular weights by the polycondensation of aromatic diacids with 4-phenoxy-m-phenylenediamine and 4-phenylthio-m-phenylenediamine, respectively. Glass transition temperatures (T_g) of these aramids were in the range 195–255°C, where T_gs of phenoxy pendant aramids were higher than those of phenylthio substituted aramids. These properties were compared with those of the parent aramids derived from m-phenylenediamine and aromatic diacids. Aromatic-aliphatic polyamides were also prepared by the reaction of these three diamines with aliphatic diacids having 4–10 methylene groups and were characterized in detail.     

Synthesis of new ordered aromatic polyester copolymers

Aromatic polyesters of 3,5-di-tert-butyl-4-hydroxybenzoic acid and 3,5-diisopropyl-4-hydroxybenzoic acid were prepared. The polymers were found to be high-melting but largely insoluble in organic solvents. The polymer based on 3,5-di-tert-butyl-4-hydroxy-benzoic acid was not degraded to monomer by sulfuric acid. A number of new aromatic polyesters were also prepared. Several new monomers for aromatic polyesters were synthesized, including bis(2,5-di-tert-butyl-4-carbophenoxyphenyl)terephthalate, m- and p-phenylene bis(3,5-di-tert-butyl-4-hydroxybenzoate), bis(2,6-di-tert-butyl-4-chlorocarboxyphenyl)terephthalate, and m-phenylene bis(3,5-diisopropyl-4-hydroxybenzoate). An aromatic polyester prepared from bis(2,6-di-tert-butyl-4-chlorocarboxyphenyl) terephthalate and resorcinol had a η_inh (trichloroethylene) of 1.05 (0.5%, 30°C) and a possible melting point of 330°C (DSC). Tough, creasable films could be cast from trichloroethylene solution of this polymer. Attempts to observe or to trap the keto-ketene that might result when 3,5-di-tert-butyl-4-hydroxybenzoyl chloride is treated with base were unsuccessful.     

1,4 polymerization of isoprene by titanate catalyst systems

Titanates are versatile in the 1,4 polymerization of isoprene. The (R′O)₄Ti/RAlCl₂ catalyst gives either cis- or trans-1,4-polyisoprene, depending on the nature of both the titanate and the solvent. Primary titanates give cis-1,4-polyisoprene in both aliphatic and aromatic solvents. Secondary titanates give cis-polyisoprene in aliphatic solvents, and trans-1,4-polyisoprene in aromatic solvents. Tertiary titanates give trans-polyisoprene in both aliphatic and aromatic solvents. A mechanism is postulated which takes into consideration the role of the solvent. ESR studies of the various titanate–RAlCl₂ catalysts were made; the paramagnetic structures are related to polymerization mechanisms.     

Synthesis and characterization of novel aromatic polyamides with polyalicyclic cardo groups

5,5-Bis[4-(4-carboxyphenoxy)phenyl]hexahydro-4,7-methanoindan ( 3a ) and 5,5-bis[4-(4-aminophenoxy)phenyl]hexahydro-4,7-methanoindan ( 3b ) were prepared in two main steps starting from the aromatic nucleophilic halogen-displacement of p-fluorobenzonitrile and p-chloronitrobenzene, respectively, with 5,5-bis(4-hydroxyphenyl)hexahydro-4,7-methanoindan in the presence of potassium carbonate in N,N-dimethylformamide (DMF). Using triphenyl phosphite and pyridine as condensing agents, two series of polyamides having polyalicyclic cardo units were directly polycondensated from dicarboxylic acid 3a with various aromatic diamines, or from diamine 3b with various aromatic dicarboxylic acids in the N-methyl-2-pyrrolidone (NMP) solution containing dissolved calcium chloride. High molecular weight polyamides with inherent viscosities between 0.73 and 1.44 dL/g were obtained. All polymers were readily soluble in polar aprotic solvents such as NMP and N,N-dimethylacetamide (DMAc) and afforded transparent, flexible, and tough films by solution casting. The glass-transition temperatures (T_g) of these aromatic polyamides were in the range of 219–253°C by DSC, and the 10% weight loss temperatures in nitrogen and air were above 467 and 465°C, respectively. A comparative study of some polyamides with an isomeric repeat unit is also presented. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4510–4520, 1999     

An Efficient One-pot Synthesis of β-Amino/β-Acetamido Carbonyl Compounds via ZrCl4-catalyzed Mannich-type Reaction

Zirconium(IV) chloride catalyzed efficient one-pot synthesis of β-amino/β-acetamido carbonyl compounds at room temperature is described. In the presence of ZrCl4, the three-component Mannich-type reaction via a variety of in situ generated aldimines, with various ketones, aromatic aldehydes and aromatic amines in ethanol, led to the formation of β-amino carbonyl compounds and the four-component Mannich-type reaction of aromatic aldehydes with various ketones, acetonitrile and acetyl chloride resulted in the corresponding β-acetamido carbonyl compounds in high to excellent yields. This methodology has also been applied towards the synthesis of dimeric β-amino/β-acetamido carbonyl compounds.     

One pot synthesis of <Emphasis Type="Italic">N</Emphasis>-ethylaniline from nitrobenzene and ethanol

A novel method for the one pot synthesis of N-alkyl arylamines from nitro aromatic compounds and alcohols is proposed through the combination of the aqueous-phase reforming of alcohol for hydrogen production, the reduction of nitro aromatic compounds for the synthesis of aromatic amine and the N-alkylation of aromatic amine for the production of N-alkyl arylamine over an identical catalyst under the same conditions of temperature and pressure in a single reactor. In this process, hydrogen generated from the aqueous-phase reforming of alcohols was used in-situ for the hydrogenation of nitro aromatic compounds for aromatic amine synthesis, followed by N-alkylation of aromatic amine with alcohols to form the corresponding N-alkyl arylamines at a low partial pressure of hydrogen. For the system composed of nitrobenzene and ethanol, under the conditions of 413 K and P _N2 = 1 MPa, the conversion degrees of nitrobenzene and aniline were 100%, the selectivity to N-ethylaniline and N, N-diethylaniline were 85.9% and 0%–4%, respectivity, after reaction for 8 h at the volumetric ratio of nitrobenzene:ethanol:water = 10:60:0. The selectivity for N, N-diethylaniline production is much lower than that through the traditional method. In this process, hydrogen and aromatic amines generated from the aqueous-phase reforming of alcohols and hydrogenation of nitro aromatic compounds, respectively, could be promptly removed from the surface of the catalyst due to the occurrence of in-situ hydrogenation and N-alkylation reactions. Thus, this may be a potential approach to increase the selectivity to N-alkyl arylamine. Supported by the Program for New Century Excellent Talents in University (Grant No. NCET-04-0557), and the Specialized Research Fund for the Doctoral Program of High Education (Grant No. SRFDP-20060337001)     

Reaction Products of Activated Aromatic and Heteroaromatic Chlorides with N,N-Disubstituted Formamides

Several N,N-disubstituted aromatic amines (3a–g) was obtained in very good yield by the reaction of adequate doubly activated aromatic or heteroaromatic halides (1a–e) with N,N-disubstituted formamides (2a–c). Analogously, starting from 4-chloro-3-pyridinesulfonamide, the appropriate 4-dialkylamino-1H ⁺-pyridinium-3-(N-formyl)sulfonamidates (5a,b) were obtained in 52–60% yield. Mechanisms of the reactions are discussed.