Penetration Process of a Hydrated Deep Eutectic Solvent Through the Stratum Corneum and its Application as a Protein Penetration Enhancer

The penetration mechanism of choline chloride-glycerol deep eutectic solvent (DES) through the stratum corneum (SC) as a potential solvent for a novel enhancer of protein penetration into the skin was investigated in a wide and small angle X-ray diffraction study. We found that DES penetrated through intercellular lipids but not the corneocytes. DES seemed to extract a portion of lipids of the short lamellae in the SC. Hydrated DES with a DES to water weight ratio of 9 to 1 (9DES-1H₂O) showed the strongest interaction with the lipids in the SC compared with water, DES, and hydrated DESs with another weight ratio of DES to water (DES : water=8 : 2). In a skin penetration test with a fluorescently labelled lysozyme, 9DES-1H₂O increased the amount of penetration through the SC by two-fold compared with HEPES buffer.     

Synthesis of 14H-dibenzo xanthene derivatives using choline chloride/tin(II) chloride deep eutectic solvent and Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/ƛ-carrageenan/Zn(II)

In this study, various xanthene derivatives have prepared efficiently through a simple method using choline chloride/tin(II) chloride (ChCl·2SnCl₂) deep eutectic solvent (DES), alone, or in the presence of Fe₃O₄/?-carrageenan/Zn(II) magnetic bionanocatalyst. In the employed procedure, 2-naphthol derivatives have mixed with aromatic or aliphatic aldehydes and the reactions have been completed in the presence of DES at 90 °C in 1.5 h. In addition, using DES/Fe₃O₄/?-carrageenan/Zn(II), the reaction time was reduced to 30 min. The employed DES has been recycled four times without important loss of its activity.     

Choline chloride based eutectic solvent for the efficient synthesis of 2-amino-4H-chromen-4-yl phosphonate derivatives via multicomponent reaction under mild conditions

Synthesis of 2-amino-4H-chromen-4-ylphosphonate derivatives has been accomplished by the one-pot three-component reaction of salicylaldehyde, malononitrile/ethylcyanoacetate and dialkyl phosphites in the presence of reusable deep eutectic solvent (DES) under mild conditions. The advantages of this method are mild reaction conditions, simple work-up procedure, use of DES as a green solvent and an economical protocol for the preparation of important biologically active phosphorus-containing compounds.     

A practical multigram-scale method for the green synthesis of 5-substituted-1H-tetrazoles in deep eutectic solvent

A series of 5-substituted-1H-tetrazoles have been efficiently synthesized in moderate to excellent yields (68–90%) under mild reaction conditions by combining aryl aldehydes, hydroxylamine hydrochloride with sodium azide in the presence of catalytic amount of Cu(OAc)₂ in deep eutectic solvent (DES). The new synthetic method has many advantages, such as high conversion, green reaction medium, easy work-up, low cost, and environment friendly.     

Deep eutectic solvent-assisted one-pot synthesis of 2-aminothiazole and 2-aminoxazole derivatives

Choline chloride–urea-based deep eutectic solvent (DES) has been found to be a highly effective catalyst and reaction medium for the one-pot synthesis of 2-aminothiazole and 2-aminoxazole derivatives. Three-component reactions of active methylene compounds, urea or thiourea and N-bromosuccinimide NBS in deep eutectic solvent furnished structurally diverse 2-aminoxazoles and 2-aminothiazoles in good to excellent yields under mild reaction conditions and short reaction times. DES is inexpensive, biodegradable and more accessible in any laboratory and industry.     

Highly efficient and green esterification of carboxylic acids in deep eutectic solvents without any other additives

A protocol that carboxylic acids esterifies with the quaternary ammonium salt of deep eutectic solvent (DES) is presented, which opens a new access to ester using DES as alkylating agent, solvent, and catalyst. The reaction runs smoothly in DES without any other additives. Substituted cinnamic acids, aromatic acids, and aliphatic acids can be esterified in moderate to good yields. The advantages of this reaction include excellent functional group compatibility and simple reaction procedure.     

The Effect of Water upon Deep Eutectic Solvent Nanostructure: An Unusual Transition from Ionic Mixture to Aqueous Solution

The nanostructure of a series of choline chloride/urea/water deep eutectic solvent mixtures was characterized across a wide hydration range by neutron total scattering and empirical potential structure refinement (EPSR). As the structure is significantly altered, even at low hydration levels, reporting the DES water content is important. However, the DES nanostructure is retained to a remarkably high level of water (ca. 42 wt % H₂O) because of solvophobic sequestration of water into nanostructured domains around cholinium cations. At 51 wt %/83 mol % H₂O, this segregation becomes unfavorable, and the DES structure is disrupted; instead, water–water and DES–water interactions dominate. At and above this hydration level, the DES–water mixture is best described as an aqueous solution of DES components.     

An eco-friendly,sustainable, and greener approach to the synthesis of Dihydroquinazolin-4(1H)-ones using a deep eutectic solvent

A safer, greener, and more effective reaction methodology for the synthesis of dihydroquinazolinones (DHQs) has been developed. The deep eutectic solvent (DES) ZnCl₂/urea employed in this study efficiently accelerated the cyclization of 2-aminobenzamide with different aldehydes (aromatic and heteroaromatic) to afford the target scaffolds without the generation of any oxidized product. This method has exhibited remarkable advantages such as quick reaction time, mild reaction conditions, high yield (82%–98%), operational simplicity, and selectivity. The approach was observed to be tolerant to electron-donating and electron-withdrawing functional groups. Green metric parameters (AEf, OE, AE, RME, CE, etc.) determined further aided this greener chemical approach.     

Deep eutectic solvents and glycerol: a simple,environmentally benign and efficient catalyst/reaction media for synthesis of N-aryl phthalimide derivatives

Abstract

Deep eutectic solvents (DES) and glycerol have been successfully employed as efficient catalysts/reaction media in the synthesis of N-aryl phthalimide derivatives from phthalic anhydride and primary aromatic amines. The DES prepared from choline chloride and malonic acid proved to be an efficient catalyst whereas glycerol and the DES of choline chloride and urea played a dual role of catalyst and solvent. These mixtures are biodegradable, nontoxic, and cost-effective thereby providing a good industrial alternative to conventional methods. These methods gave products in moderate to high yields with good recyclability of catalyst/solvent at least up to five consecutive runs.     

Development of Monoclonal Antibody-based Enzyme-linked Immunosorbent Assay to the Estrogen Diethylstilbestrol

Diethylstilbestrol （DES） is a synthetic estrogen that has ever been used worldwide. Polyclonal antibodies （PAbs） were used in immunoassay for detection of DES residues in environmental and agricultural samples in previous paper. In this paper, an indirect competitive enzyme-linked immunosorbent assay （icELISA） was developed based on monoclonal antibody （MAb） for the determination of diethylstilbestrol. Mono-o-carboxypropyldiethylstilbestrol （DES-CP） and mono-o-carboxymethyldiethylstilbestrol （DES-CME） were synthesized to be haptens. DES-CP was coupled to bovine serum albumin （BSA） to be an immunogen in BALB/c female mouse for MAb production. The MAb was characterized for specificity and affinity to DES in icELISA. Under the optimum condition, the icELISA showed an ICs0 of 9.8 ng/mL, the limit of detection （IC20） of 2.3 ng/mL and a working range of 2-42 ng/mL. Hexestrol and dienestrol exhibited cross-reactivity values were 44% and 27%, respectively. Cross-reactivity of natural estrogen 17β-estradiol was less than 0.1%. The influences of some factors such as salt concentration, pH and organic solvent concentration on the assay were evaluated. The concentrations of DES in the fortified water samples determined by the assay were correlated well with the fortification levels. The results were conf＇m＇ned with analysis by HPLC.     

An atom-economic and odorless thia-Michael addition in a deep eutectic solvent

The first 100% atom-efficient and odorless protocol for carbon–sulfur bond formation in a deep eutectic solvent (DES) as both the reaction medium and catalyst is reported. The biodegradable and inexpensive DES provides an efficient and convenient ionic reaction medium for the thia-Michael addition with in situ generation of S-alkylisothiouronium salts in place of thiols without the urea by-product segment. This protocol offers several advantages including short reaction times, high yields, clean reactions, and inexpensive and commercially available starting materials.     

Green chemistry approach to the synthesis of 3-substituted-quinazolin-4(3H)-ones and 2-methyl-3-substituted-quinazolin-4(3H)-ones and biological evaluation

ABSTRACT

A synthesis of two series of 3-substituted quinazolinones was performed utilizing a green chemistry approach, deep eutectic solvents and microwaves, namely. 2-Methyl-3-substituted-quinazolin-4(3H)-one derivatives were synthesized in a two-step reaction, using choline chloride:urea deep eutectic solvent (DES). 3-Substituted-quinazolin-4(3H)-ones were synthesized in one-pot one-step reaction of anthranilic acid, amines and orthoester in a microwave reactor. For the synthesis of 2-methyl-3-substituted-quinazolin-4(3H)-ones, first conventional synthesis of benzoxazinone, as an intermediate, was performed. Further, benzoxazinone in reaction with corresponding amines, in choline choline:urea deep eutectic solvent, furnished desired compounds. These procedures are based on green principles with the aim of developing synthetic routes for the potential antitumor agents. All compounds were characterized by LC/MS, ¹H NMR and ¹³C NMR spectral techniques. Compound 1 bearing trifluoromethoxyphenyl group showed promising activity against HuT-78 cell line with IC₅₀ of 51.4?±?5.1?µM.     

Fast Assembly of Metal Organic Framework UiO-66 in Acid-Base Tunable Deep Eutectic Solvent for the Acetalization of Benzaldehyde and Methanol

Zirconium-based metal-organic frameworks (MOFs) have attracted extensive attention owing to their robust stability and facile functionalization. However, they are generally prepared in common volatile solvents within a long reaction time. Here, we introduced environmentally friendly, cheap, and acid-based tunable deep eutectic solvents (DESs) formed from 2-methyl imidazole (MIm) and p-toluenesulfonic acid (PTSA) which significantly accelerated the assembly of zirconium-based MOF (UiO-66) without any aggressive additives. PTSA in acidic DES and ZrOCl₂ preliminarily formed Zr(IV) oxo organic acid framework, whereas basic DES completely dissolved the ligand of UiO-66. The strong hydrogen bond effect of PTSA and MIm efficiently accelerated the linker exchange between zirconium oxo organic coordination in acidic DES and benzenedicarboxylate linker in weak basic DES within a reaction time of 2 h at 50 °C. Thus, UiO-66 was quickly assembled with small particle sizes and used as an excellent catalyst for the acetalization of benzaldehyde and methanol. Therefore, the developed synthesis approach provides a new green strategy to quickly prepare and design various structures of metal-based compounds under mild reaction conditions.     

Exploring the nitro group reduction in low-solubility oligo-phenylenevinylene systems: Rapid synthesis of amino derivatives

Abstract

A small series of amino oligo-phenylenevinylenes (OPVs) were successfully synthesized from their nitro-analogs in a rapid, simple, and highly efficient fashion employing a sodium sulfide/pyridine system as a reducing agent. In this research, classic and sustainable reduction methodologies including NH₄HCO₂/Zn and a choline chloride/tin (II) chloride deep eutectic solvent (DES) were also evaluated, showing degradation products, incomplete reactivity, and product isolation difficulties in all cases. The straightforward Na₂S/pyridine synthetic protocol proved to maintain the E-E stereochemistry of the OPV backbone that has been previously assembled by the Mizoroki–Heck cross-coupling reaction. Also, the optoelectronic properties were determined and discussed, considering the amino group insertion in these conjugated systems as a contribution for future construction of novel materials with applications in supramolecular electronics, light harvesting, and photocatalysis.     

A Carboxyl-Functionalized Covalent Organic Framework Synthesized in a Deep Eutectic Solvent for Dye Adsorption

Instead of using organic solvents, a deep eutectic solvent (DES) composed of tetrabutylammonium bromide and imidazole (Bu₄NBr/Im) was employed as a solvent for the first time to synthesize covalent organic frameworks (COFs). Due to the low vapor pressure of the Bu₄NBr/Im-based DES, a new carboxyl-functionalized COF (TpPa-COOH) was synthesized under environmental pressure. The as-synthesized TpPa-COOH has open channels, and the DES can be removed completely from the pores. The dye adsorption performance of TpPa-COOH was examined for three organic dyes with similar molecular sizes: one anionic dye (eosin B, EB) and two cationic dyes (methylene blue, MB and safranine T, ST). TpPa-COOH showed an excellent selective adsorption effect on MB and ST. The electronegative keto form in TpPa-COOH might help to form electrostatic and π–π interactions between the π-stacking frameworks of TpPa-COOH and the positive plane MB and ST molecules. The adsorption isotherms of MB and ST on TpPa-COOH were further investigated in detail, and the equilibrium adsorption was well modeled by using a Langmuir isotherm model. Together with hydrogen bonding, TpPa-COOH showed higher adsorption capacity for ST than for MB (1135 vs. 410 mg g⁻¹). These results could provide a guidance for the green synthesis of adsorbents in removing organic dyes from wastewater.     

Furfural and 5-Hydroxymethylfurfural Production from Sugar Mixture Using Deep Eutectic Solvent/MIBK System

Choline chloride (ChCl) / glycolic acid (GA) deep eutectic solvent (DES) media with high water content but without any additional catalyst are introduced in furfural and 5-hydroxymethylfurfural (HMF) production. The effects of water content, reaction time, and reaction temperature are investigated with two feedstocks: a glucose/xylose mixture and birch sawdust. Based on the results, 10 equivalent quantities of water (32.9 wt.%) were revealed to be beneficial for conversions without rupturing the DES structure. The optimal reaction conditions were 160 °C and 10 minutes for the sugar mixture and 170 °C and 10 minutes for birch sawdust in a microwave reactor. High furfural yields were achieved, namely 62 % from the sugar mixture and 37.5 % from birch sawdust. HMF yields were low, but since the characterization of the solid residue of sawdust, after DES treatment, was revealed to contain only cellulose (49 %) and lignin (52 %), the treatment could be potentially utilized in a biorefinery concept where the main products are obtained from the cellulose fraction. Extraction of products into the organic phase (methyl isobutyl ketone, MIBK) during the reaction enabled the recycling of the DES phase, and yields remained high for three runs of recycling.     

Hydrophobic modification of nanocellulose and all-cellulose composite films using deep eutectic solvent as a reaction medium

Cellulose - In this work, deep eutectic solvent (DES) based on imidazole and triethylmethylammonium chloride was used as a reaction medium for the esterification of cellulose nanofiber (CNF) and...     

Chemoselective synthesis of xanthenes and tetraketones in a choline chloride-based deep eutectic solvent

A chemoselective synthesis of tetraketone and xanthene derivatives, by means of tandem Knoevenagel condensation and Michael addition in choline chloride-based deep eutectic solvents (DESs), is presented. The reaction of readily available aldehydes and active methylene compounds in malonic acid- and ZnCl₂-based DES gives various xanthenes derivatives with good to excellent yields under mild reaction conditions. On the other hand, tetraketones were synthesized in almost quantitative yields by simple condensation of an aldehyde and active methylene compounds in milder deep eutectic solvents of urea and SnCl₂. In addition, the reaction of other types of choline chloride-based DES leads to a mixture of tetraketone and xanthene.     

Efficient Extraction of Fermentation Inhibitors by Means of Green Hydrophobic Deep Eutectic Solvents

The methods for hydrogen yield efficiency improvements, the gaseous stream purification in gaseous biofuels generation, and the biomass pretreatment are considered as the main trends in research devoted to gaseous biofuel production. The environmental aspect related to the liquid stream purification arises. Moreover, the management of post-fermentation broth with the application of various biorefining techniques gains importance. Chemical compounds occurring in the exhausted liquid phase after biomass pretreatment and subsequent dark and photo fermentation processes are considered as value-added by products. The most valuable are furfural (FF), 5-hydroxymethylfurfural (HMF), and levulinic acid (LA). Enriching their solutions can be carried with the application of liquid–liquid extraction with the use of a suitable solvent. In these studies, hydrophobic deep eutectic solvents (DESs) were tested as extractants. The screening of 56 DESs was carried out using the Conductor-like Screening Model for Real Solvents (COSMO-RS). DESs which exposed the highest inhibitory effect on fermentation and negligible water solubility were prepared. The LA, FF, and HMF were analyzed using FT-IR and NMR spectroscopy. In addition, the basic physicochemical properties of DES were carefully studied. In the second part of the paper, deep eutectic solvents were used for the extraction of FF, LA, and HMF from post-fermentation broth (PFB). The main extraction parameters, i.e., temperature, pH, and DES: PFB volume ratio (V_DES:V_PFB), were optimized by means of a Box–Behnken design model. Two approaches have been proposed for extraction process. In the first approach, DES was used as a solvent. In the second, one of the DES components was added to the sample, and DES was generated in situ. To enhance the post-fermentation broth management, optimization of the parameters promoting HMF, FF, and LA extraction was carried under real conditions. Moreover, the antimicrobial effect of the extraction of FF, HMF, and LA was investigated to define the possibility of simultaneous separation of microbial parts and denatured peptides via precipitation.     

Ultrafast 99% Polyethylene terephthalate depolymerization into value added monomers using sequential glycolysis-hydrolysis under microwave irradiation

Effective and efficient hybrid depolymerisation technologies are emerging as high potential sustainable routes with considerable benefits over conventional recycling methods for the achievement of circular economies for plastics. Herein, combined green and fast glycolysis-hydrolysis depolymerization of polyethylene terephthalate (PET) was carried out under microwave irradiation (MW) with excellent efficiencies. In MW assisted glycolysis of PET, the catalytic activity of two deep eutectic solvents (DES) based on (choline chloride-urea (DES 1)) and (choline chloride-thiourea (DES 2)) was evaluated and compared. Optimised glycolysis conditions were determined using Box Behnken Design (BBD) to attain maximum weight loss of PET, low crystallinity and increased carbonyl index of residual PET. DES volume of 4 mL, 5.5–6 mL of ethylene glycol, and 0.5 min MW irradiation time resulted in a prominent rise in PET weight loss and carbonyl index of residual PET. DES 2 showed an improved catalytic activity than that of DES 1 which is associated to its stronger interaction with EG and PET polymer chains during the course of the reaction. Residual PET obtained post glycolysis reaction was further depolymerized using MW assisted hydrolysis in the presence of weakly basic Na₂CO₃ and EG. Within 3-minute, the proposed sequential depolymerization technologies facilitated ≈99% conversion of PET to terephthalic acid (TPA), monohydroxyethyl terephthalate (MHET), and bis (2-hydroxyethyl) terephthalate (BHET) monomers produced at a yield of 62.79–80.66%, 17.22–34.79% and 0.54–0.59% respectively. Application on post-consumer PET sample also revealed very satisfactory results with 96.77–98.25% PET conversion and 60.98–78.10% yield of TPA.