Interaction Between Two Similar Plane Parallel Double Layers for (NH4)2Fe(SO4)2 or (NH4)2Cu(SO4)2 Type Complex Salt Electrolytes at Positive Surface Potential

Interaction energies between two similar plane parallel double layers for (NH₄)₂Fe(SO₄)₂ or (NH₄)₂Cu(SO₄)₂ type complex salt electrolytes at positive surface potential were expanded in a power series and accurate numeral results were given for 0.1 ≤ y _e  < y ₀ ≤ 20. The general expressions were given for the interaction energies of A _ν +B _ν′ +C_ν? type complex salt electrolytes at y > 0. The interaction energies for simple salts NaCl, CaCl₂, Na₂SO₄, FeCl₃, Na₃PO₄, Mg₃(PO₄)₂, Al₂(SO₄)₃, and complex salts (NH₄)₂Fe(SO₄)₂ or (NH₄)₂Cu(SO₄)₂ at y ₀ = 1 were compared. There was hardly difference between these simple salts and this complex salt for the interaction energies. The interaction energy for complex salt (NH₄)₂Fe(SO₄)₂ was close to that for simple salt Na₃PO₄.

Supplemental files are available for this article. Go to the publisher's online edition of the Journal of Dispersion Science and Technology to view the free supplemental file.     

Interaction between Two Similar Plane Parallel Double Layers for Al2(SO4)3 Type Asymmetric Electrolytes at Positive Surface Potential

The interaction between two similar plane double-layers for Al₂(SO₄)₃ type asymmetric electrolytes was investigated with the aid of λ parameter method. The interaction energies for the system at positive surface potential were expanded in the power series at low and high potential, respectively. The high potential formula can be applied to 0.2 ≤ y_e  < y ₀ ≤ 20. This almost covers with the bounds of all potential, and that the calculative method is relative simple. The accurate numeral results and V′?ξ_d curves were given for y ₀ ≤ 20. When y ₀ ≥ 5, V′ hardly change with y ₀. The interaction energies between two similar plane parallel double layers for the different type electrolytes at y ₀ = 1 were compared. The present results are also fit for Mg₃(PO₄)₂ type electrolytes at negative surface potential.     

Synthesis,structure, magnetic properties and kinetics of formation of a cluster containing a {Cu3(μ3-OH)} core supported by a triazole-based ligand

The trinuclear copper complex, [Cu₃(μ₃-OH)(CTMB)₃(NO₃)₂(CH₃CN)₂]·5CH₃CN·H₂O (1) {CTMB = cyclohexotriazole-3-(4-methoxybenzamide)}, has been prepared by mixing Cu(NO₃)₂·2.5H₂O and CHMBH {CHMBH = N,N′-cyclohexane-1,2-diylidene-bis(4-methoxybenzoylhydrazide)} in acetonitrile under ambient conditions. Compound 1 was characterized by IR and UV–visible spectroscopies as well as elemental analyses. X-ray crystallography shows that the cluster contains a {Cu₃(μ₃-OH)} core supported by three triazole-based Schiff base ligands. Each Cu is bound to the 2-N of one triazole ring and the 1-N of another. However, the coordination sphere of each Cu is different, one is five-coordinate and the other two are six-coordinate and bridged by a NO₃ group. The six-coordinate sites are different, one has a terminal NO₃ and the other a MeCN ligand. Magnetic measurements revealed the presence of isotropic and antisymmetric exchange between the copper(II) centers. The data were analyzed using the Hamiltonian containing isotropic exchange for an isosceles triangle together with antisymmetric exchange: H = –J₁(S₁S₂ + S₂S₃)?J₂S₁S₃ + G[S₁ × S₂ + S₂ × S₃ + S₃ × S₁]. Compound 1 exhibits strong antiferromagnetic coupling with J₁ = ?180 and J₂ = ?118 cm^?1 and antisymmetric exchange with G_z = 15 cm^?1. Stopped flow spectrophotometric studies show that the formation of 1 occurs in three distinct phases and the kinetics of each phase has been determined.     

NH2SO3H and H6P2W18O62 · 18H2O-Catalyzed,Three-Component,One-Pot Synthesis of Benzo[c]acridine Derivatives

We report here two simple methods for the synthesis of benzo[c]acridine derivatives from three-component, one-pot condensation of 1-naphthylamine, dimedone, and a variety of substituted aldehydes in the presence of a catalytic amount of NH₂SO₃H or H₆P₂W₁₈O₆₂ · 18H₂O under solvent-free conditions at 120 °C or in refluxing ethanol.     

Modification,characterization and peroxidase-mimetic properties of calcined product of a cobalt compound

One-pot solvothermal treatment of Co(NO₃)₂·6H₂O, H₂L (5-(3-methyl-5-(pyridin-4-yl)-4H-1,2,4-triazol-4-yl) isophthalic acid), and 4,4′-bipyridine (4,4′-bipy) in H₂O/DMF (V/V = 1?:?1) yielded a cobalt-organic chain, [Co(L)(O)(H₂O)₂]_n·1.25nH₂O (1). Compound 1 as raw materials was calcined to obtain Co₃O₄, which could be confirmed by PXRD and SEM. Via the modification, Co₃O₄@SiO₂-NH₂ and Co₃O₄@SiO₂-NH₂-FA samples could be obtained. Compared to Co₃O₄@SiO₂-NH₂, Co₃O₄@SiO₂-NH₂-FA seems to have better peroxidase-mimetic properties. UV–vis results showed that optimal conditions of peroxidase-mimetic experiments were at 50°C in sodium acetate-acetic acid buffer (pH 3.6, 0.2 M), when the concentration of tetramethylbenzidine (TMB) was 0.2 mM. A concentration-dependent manner was shown between the concentration of glucose and absorbance in the measurement experiments for glucose.     

NMR and kinetic studies of the interactions of [Au(cis-DACH)Cl2]Cl and [Au(cis-DACH)2]Cl3 with potassium cyanide in aqueous solution

The interactions of [Au(cis-DACH)Cl₂]Cl and [Au(cis-DACH)₂]Cl₃ [where cis-DACH is cis-1,2-diaminocyclohexane] with enriched KCN were carried out in CD₃OD and D₂O, respectively. The reaction pathways of these complexes were studied by ¹H, ¹³C, ¹⁵N NMR, UV spectrophotometry, and electrochemistry. The kinetic data for the reaction of cyanide with [Au(cis-DACH)₂]Cl₃ are k = 18 M^?1s^?1, ?H^≠ = 11 kJ M^?1, ?S^≠ = ?185 JK^?1 M^?1, and E_a = 13 kJ M^?1 with square wave voltammetric (SWV) peak +1.35 V, whereas the kinetic data for the reaction of cyanide ion with [Au(cis-DACH)Cl₂]Cl are k = 148 M^?1s^?1, ?H^≠ = 39 kJM^?1, ?S^≠ = ?80 JK^-1 M^?1, and E_a = 42 kJM^?1 along with SWV peak +0.82 V, indicating much higher reactivity of [Au(cis-DACH)Cl₂]Cl toward cyanide than [Au(cis-DACH)₂]Cl₃. The interaction of these complexes with potassium cyanide resulted in an unstable [Au(¹³CN)₄]^? species which readily underwent reductive elimination reaction to generate [Au(¹³CN)₂]^? and cyanogen.     

Hydrogen Peroxide Biosensor Based on the Electrochemistry of the Myoglobin‐TATP Composite Film

Abstract

Direct electrochemistry of the myoglobin‐triacetone triperoxide (Mb‐TATP) composite on carbon paste (CP) electrode is reported. This electrode gives a well‐defined and quasi‐reversible cyclic voltammogram for the Mb Fe^III/Fe^II redox coupled with the formal potential (E?′) of ?0.302 V (vs. Ag/AgCl) in pH 6.92 phosphate buffer. Electronic and vibrational spectroscopies show that the Mb in the composite retains a structure similar to its native form. The enzymatic reactivity to the reduction of H₂O₂ has been studied for the Mb‐TATP film. The analytical performances have been obtained with the linear range of 78.32–1135.64 µM, the detection limit of 55 µM (S/N=3), and the apparent Michaelis‐Menten constant (K _m) of 662.8 µM. This H₂O₂ biosensor based on the electrocatalysis of the immobilized Mb presents a higher stability within two weeks.     

Supramolecular inclusion of a pillared double-layered host by an anion-directed second-sphere coordination

In this paper, we have illustrated the utilisation of a second-sphere coordination approach to construct supramolecular inclusion solids with varieties of guest molecules. A flexible molecule N,N,N′,N′-tetra-p-methylbenzyl-ethylenediamine (L1) bearing doubly protonated H-bond donors was designed, capable of forming N–H…Cl hydrogen bonds with a crystallographically unique chloride anion, to construct an anion-directed ligand. The pillared double-layered host framework was constructed by an anion-directed ligand and primary coordination sphere [CoCl₄]^2 ?  through weak C–H…Cl hydrogen-bonding interactions. A variety of guest molecules, such as p-anisaldehyde, 1,4-dimethoxy-2,5-bis(methoxymethyl)benzene, can be included, leading to the formation of novel supramolecular inclusion solids: [L1]·4[H]⁺·[CoCl₄]^2 ? ·2Cl^? ·1.5[C₈H₈O₂]·0.25[CH₃OH] (1) and [L1]·4[H]⁺·[CoCl₄]^2 ? ·2Cl^? ·1.5[C₁₂H₂₀O₄]·0.5[CH₃OH] (2).

We have presented herein the utilisation of a second-sphere coordination approach to construct supramolecular inclusion solids with a variety of guest molecules. A novel type of a pillared double-layered host framework was constructed by a second-sphere coordination between the anion-directed ligand (L1 = N,N,N′,N′-tetra-p-methylbenzyl-ethylenediamine) and [CoCl₄]^2 ?  through weak C–H…Cl hydrogen-bonding interaction, and a variety of guest molecules, such as p-anisaldehyde, 1,4-dimethoxy-2,5-bis(methoxymethyl)benzene, can be included, leading to the formation of supramolecular inclusion solids: [L1]·4[H]⁺·[CoCl₄]^2 ? ·2Cl^? ·1.5[C₈H₈O₂]·0.25[CH₃OH] (1) and [L1]·4[H]⁺·[CoCl₄]^2 ? ·2Cl^? ·1.5[C₁₂H₂₀O₄]·0.5[CH₃OH] (2)

     

A rapid microwave-assisted acid extraction method based on the use of diluted HNO3-H2O2 followed by ICP-MS analysis for simultaneous determination of trace elements in coal samples

Before coal processing such as pyrolysis, liquefaction, gasification and combustion, it is very crucial to monitor the trace element concentration levels as that determines the coal quality. Therefore, the current study describes the development of microwave-assisted acid extraction (MW-AAE) method for extraction of 15 trace elements in coal samples prior to their determination using inductively coupled plasma-mass spectrometry. Diluted HNO₃-H₂O₂ was used in order to reduce reagents amount used, eliminate matrix interferences caused by concentrated acids and to decrease waste produced in analytical laboratories. The optimisation of the proposed extraction method was carried out by using a full factorial design (2⁴) involving four factors; that is, temperature, extraction time, HNO₃ and H₂O₂ concentrations. The optimum conditions for the MW-AAE procedure were found to be 200°C, 5 min, 5 mol L^?1 and 2 mol L^?1 for temperature, extraction time, HNO₃ and H₂O₂ concentrations, respectively. Under optimum conditions, the accuracy of the MW-AAE method was examined by analysing three coal certified reference materials (SARM 18, 19 and 20) and recoveries of 80–115% were achieved for V, Mn, Co, Ni, Cu, Zn, Ga, Ge, As, Sr, Zr, Cs, Ba, Pb and U, except for Ti (10–25%) and Hf (27–70%). In addition, the precision of the proposed method, expressed in terms of relative standard deviation (SD) (n = 15), was within the accepted range (≤3.5%). The method detection limits of 0.001–0.57 µg g^?1 for all trace elements under the investigation were similar to the literature reported work, except for Ti (4.00 µg g^?1).     

Acoustical and thermodynamical parameters of aluminium oxide nanoparticles dispersed in aqueous ethylene glycol

In the present work aluminium oxide (Al₂O₃) nanoparticles were synthesised by the precipitation method using AlCl₃ as a starting material. The synthesised nanoparticles were characterised by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX). These nanoparticles have been dispersed in base fluid, an aqueous solution of ethylene glycol (EG). Density (ρ), ultrasonic velocity (u), and viscosity (η) for these nanofluids have been measured at different concentrations as a function of temperature (T = 303.15 K, 308.15 K, and 313.15 K). Using their values various acoustical and thermodynamical parameters have been computed.     

Simultaneous preconcentration and determination of malachite green and fuchsine dyes in seafood and environmental water samples using nano-alumina-based molecular imprinted polymer solid-phase extraction

Molecular imprinted polymer for determination of malachite green (MG) and fuchsine basic (FU) dyes by spectrophotometry has been used, to develop a novel simultaneous extraction and preconcentration method. Molecularly imprinted layer-coated nano-alumina (MIP@Nano-Al₂O₃) as adsorbent was prepared by surface molecular imprinting technique, and characterised by FTIR spectroscopy, scanning electron microscopy, energy dispersive X-ray analysis (EDAX) and thermogravimetric analysis (TGA). The method is based on simultaneous extraction of MG and FU dyes from aqueous solution by using molecularly imprinted polymer and measuring the absorbance at 617 and 546 nm for MG and FU, respectively. Parameters which affect the extraction efficiency such as pH, volume of eluent and amount of adsorbent were investigated and optimised. Linear calibration curves were obtained in the range of 2–750 ng mL^?1 for MG and 1–240 ng mL^?1 for FU under optimum conditions. Detection limit based on three times the standard deviation of the blank (3S_b) was 0.655 and 0.245 ng mL^?1 (n = 10) for MG and FU, respectively. The relative standard deviation (RSD) for 100 ng mL^?1 of MG and FU was 2.35 and 3.06% (n = 7), respectively. The method was applied to the simultaneous determination of the dyes in different seafood and environmental water samples.     

Syntheses,structural determination,and binding studies of nine-coordinate multinuclear (mnH)2[EuIII(egta)]2·6H2O and binuclear (mnH)4[EuIII2(dtpa)2]·6H2O

Two lanthanide complexes, (mnH)₂[Eu^III(egta)]₂·6H₂O (1) (H₄egta = ethyleneglycol-bis-(2aminoethylether)-N,N,N′,N′-tetraacetic acid) and (mnH)₄[Eu^III₂(dtpa)₂]·6H₂O (2) (H₅dtpa = diethylenetriamine-N,N,N′,N″,N″-pentaacetic acid), have been synthesized and characterized by FT-IR spectroscopy, thermal analysis, and single-crystal X-ray diffraction. X-ray diffraction reveals that 1 is multinuclear nine-coordinate and crystallizes in the monoclinic crystal system with space group C2/c. The obtained cell dimensions are a = 38.513(3)?Å, b = 13.5877(8)?Å, c = 8.7051(5)?Å, β = 99.6780(10)°, and 4490.6(5)?ų. Each methylamine (mnH⁺) cation in 1, through hydrogen bonds, connects three adjacent [Eu^III(egta)]^? anions. The [Eu^III(egta)]^? anions connect one another forming a 1-D multinuclear zigzag chain structure along the c-axis. Complex 2 is nine-coordinate binuclear structure with tricapped trigonal prismatic conformation and crystallizing in the monoclinic crystal system, but with space group P2₁/n. The obtained cell dimensions are a = 9.9132(8)?Å, b = 24.1027(18)?Å, c = 10.7120(10)?Å, β = 109.1220(10)°, and 2418.2(3)?ų. For 2, there are two kinds of methylamine cations (mnH⁺) connecting [Eu^III₂(dtpa)₂]^4? complex anions and lattice waters through hydrogen bonds, leading to formation of a 2-D ladder-like layer structure.     

Synthesis and application of polythiophene-coated Fe3O4 nanoparticles for preconcentration of ultra-trace levels of cadmium in different real samples followed by electrothermal atomic absorption spectrometry

In this research, magnetic Fe₃O₄ nanoparticles were synthesised by co-precipitation method and modified with polythiophene (PT) to produce Fe₃O₄-PT nanoparticles for preconcentration and determination of cadmium (??) ion followed by electrothermal atomic absorption spectrometry. The results of FT-IR spectroscopy, EDX analysis and SEM images show that Fe₃O₄-PT nanoparticles were synthesised successfully. Different parameters such as sample pH, amounts of adsorbent, sample volume, extraction time, type and concentration of eluent and desorption time were completely investigated and optimum conditions were selected.

Under the optimum conditions, the calibration curve was linear in the range of 0.01–0.25 µg L^?1 of cadmium (??). The relative standard deviation was 4.7% (n = 7, 0.10 µg L^?1 Cd²⁺) and limit of detection was 3.30 ng L^?1. The accuracy of the proposed method was verified by the analysis of a certified reference material and spike method. Finally, the proposed method was applied for the determination of ultra-trace levels of cadmium (??) in different water and food samples.     

A fluorescent 3-D metal-organic framework with unusual tetranuclear zinc secondary building units

A 3-D metal-organic framework (MOF) {Zn₄(μ₃-OH)₂(bdc)₃(pad)₂}·2H₂O (1, H₂bdc = 1,4-benzenedicarboxylic acid, pad = 1,10-phenanthroline-5,6-dione) with unusual Zn₄(μ₃-OH)₂(COO)₆(N₂)₂ secondary building units (SBUs) has been hydrothermally synthesized and characterized by single crystal X-ray diffraction, powder X-ray diffraction, thermogravimetric analysis, elemental analysis, and infrared spectroscopy. The tetranuclear Zn₄ SBU was formed through two dinuclear Zn₂ clusters by sharing two μ₃-OH bridges. Considering this Zn₄ SBU as a six-connected node, the overall framework of 1 has a pcu topology. This tetranuclear Zn₄ SBU can be used as a node in construction of MOFs.     

Mimicking the electronic structure of endohedral triangular lanthanide clusters in “free” from host carbon cages metallofullerenes uncovers a peculiar reactivity pattern

Highly reduced [Cp₃Ln₃(μ₂-H)₃]^?/0 (Ln = La or Lu; Cp = C₅H₅^?) clusters “free” from host carbon cages were used as models to mimic the electronic structure of La₃@C₁₁₀ and Lu₃@C₈₀ EMFs. DFT calculations revealed that these clusters “unshielded” from host carbon cages are highly reactive, disrupting strong single H–H, H–X (X = F, Cl, Br, and I) and double O=O bonds and descending the inert N≡N triple bond up to a single N–N bond, yielding stable bicapped trinuclear [Cp₃Ln₃(μ₂-H)₃(μ₃-H)₂]^?, [Cp₃Ln₃(μ₂-H)₃(μ₃-H)(μ₃-X)]^?, [Cp₃Ln₃(μ₂-H)₃(μ₃-O)₂]^?, and [Cp₃Ln₃(μ₂-H)₃(μ₃-N)₂]^? clusters. The calculated thermodynamics of the reactions revealed an unprecedented reactivity pattern inherent to multimetallic cooperative effect on nonclassic oxidative addition reactions which proceed by electrophilic attack of the oxidative addition (oxad) substrates at the center of the highly reduced triangular trilanthanide Ln₃ rings accompanied by “penetration” of the ring plane that cuts the strong bonds. The [Cp₃Ln₃(μ₂-H)₃]^?/0 (Ln = La or Lu) clusters, mimicking also the electronic structure of La₃@C₁₁₀ and Lu₃@C₈₀ EMFs, easily capture hydrogen, nitrogen, oxygen, and halogen atoms to yield monocapped trimetallic [Cp₃Ln₃(μ₂-H)₃(μ₃-X)] (X = H, N, O, F, Cl, Br, and I) clusters. The molecular and electronic structures of the “free” from the cage monocapped trimetallic clusters are thoroughly discussed.     

Absorption,desorption and interaction of SO2 with the binary system tetraethylene glycol + dimethyl sulfoxide

The gas-liquid equilibrium (GLE) data were determined for the mixture SO₂ + N₂ in the binary system of tetraethylene glycol (TeEG) + dimethyl sulfoxide (DMSO) at T = 298.15–313.15 K and p = 123.15 kPa with the SO₂ partial pressures of 0.4–150 Pa. From GLE data, Henry’s law constants (HLCs) were obtained. When the SO₂ concentration in the gas phase was designed at y_SO2 = 500 ppmv, the SO₂ solubility in the binary system is located in a minimum of 9.36 mol m^?3 in TeEG and a maximum of 80.34 mol m^?3 in DMSO. The SO₂ absorption process was reversible from the five absorption–desorption cycles, and the solvents could repeat utilisation without obvious loss of absorption capacity and the homologous SO₂ desorption efficiency was nearby 98.7%. Furthermore, the spectral consequences illustrated that H-bonding was formed among TeEG, DMSO and SO₂.     

Micromorphology Characterization of SiO2-Based Composite Thin Films with Immobilized Terbium(III) Complex

The aim of this study was to investigate by atomic force microscopy and multifractal analysis the three-dimensional (3-D) of surface micromorphology of the complex of Tb(III) with the biscoumarin derivative 3,3′-[(4-hydroxyphenyl)methyl)]bis-(4-hydroxy-2H-1-benzopyran-2-one), Tb(C₂₅H₁₅O₇)₃ · 5H₂O immobilized in transparent SiO₂-based films by a simple casting technique. The 3-D surfaces contain irregularities of various orders spread on the surface due to the intrinsic method of surface preparation. We found that the micromorphology of all analyzed samples has multifractal characteristics. The generalized dimension D _q and the singularity spectrum f(α) provided quantitative values that describe the degree of heterogeneity in the 3-D surface geometry at nanometer scale. The results showed that the larger the spectrum width Δα (Δα = α _max  ? α _min ) of the multifractal spectra f(α), the more nonuniform is the surface micromorphology. These results demonstrate that multifractal analysis is a more precise and reliable tool for quantitative characterization of 3-D surface micromorphology.