A study of the selenites of cerium

The solubilities of the systems CeO₂-SeO₂-H₂O and Ce₂O₃-SeO₂-H₂O were studied at 100°C. The field of crystallization of Ce(SeO₃)₂ was established in the system CeO₂-SeO₂-H₂O, and fields of crystallization of Ce₂(SeO₃)₃ and Ce₂(SeO₃)₃H₂SeO₃ were established in the system Ce₂O₃-SeO₂-H₂O. The compound obtained were identified by means of chemical, X-ray and derivatograph analysis. The mechanism of thermal dissociation of Ce(SeO₃)₂, Ce₂(SeO₃)₃ and Ce₂(SeO₃)₃·H₂SeO₃ was studied. This revised version was published online in August 2006 with corrections to the Cover Date.     

Stages of thermal decomposition of sodium oxo-salts of sulphur

Thermal behaviour of sodium oxo-salts of sulphur: Na₂SO₄, Na₂S₂O₇, Na₂S₂O₆, Na₂SO₃, Na₂S₂O₅, Na₂S₂O₄, Na₂S₂O₃, Na₂S₃O₆ and of sulphides Na₂S and Na₂S₂ was studied on heating up to 1000°C. The experiments were performed with anhydrous compounds obtained from commercial products by recrystallisation and dehydration. The stage mechanisms of decomposition of anionic sub-lattices of the salts have been proposed basing on the Górski’s morphological classification of simple species. The thermal stability and the stage decomposition mechanisms were correlated with the structure and the potential chemical properties of the salt anions. The thermal decomposition processes were studied by means of thermal analysis, and the decomposition products were identified by means of X-ray phase analysis.     

Determination of kinetic parameters of inorganic metalporphyrins

The thermal properties of four heteropoly complexes α-K₃H₃[SiW₁₁Ni(H₂O)O₃₉]·11.5H₂O (I), α-K₃H₂[SiW₁₁Fe(H₂O)O₃₉]·9H₂O (II), α-[(C₄H₉)₄N]_3.5H_1.5[SiW₁₁Fe(H₂O)O₃₉]·4.5H₂O (III) and α-[(C₄H₉)₄N]_3.5H_2.5[SiW₁₁Cu(H₂O)O₃₉]·6H₂O (IV) were studied by means of TG, DTA and DSC. The activation energy and reaction order of the thermal decomposition reaction of these complexes have been calculated.

---

Zusammenfassung Mittels TG, DTA und DSC wurden die thermischen Eigenschaften der vier heteropolaren Komplexe α-K₃H₃[SiW₁₁Ni(H₂O)O₃₉]·11.5H₂O (I), α-K₃H₂[SiW₁₁Fe(H₂O)O₃₉]·9H₂O (II), α-[(C₄H₉)₄N]_3.5H_1,5[SiW₁₁Fe(H₂O)O₃₉]·4.5H₂O (III) und α-[(C₄H₉)₄N]_3.5H_2,5 [SiW₁₁Cu(H₂O)O₃₉]·6H₂O (IV) untersucht. Die Aktivierungsenergie und Reaktionsordnung der thermischen Zersetzungsreaktion dieser Komplexe wurde berechnet.

     

Derivatographic study of the thermal behaviour of 13 rare earth element oxides

The simultaneous TG-DTG-DTA thermoanalytical curves of 13 rare earth (4f) element oxides, namely, CeO₂, Dy₂O₃, Er₂O₃, Gd₂O₃, HfO₂, Ho₂O₃, Nd₂O₃, Pr₆O₁₁, Sm₂O₃, Tb₄O₇, Tm₂O₃, Yb₂O₃ and Y₂O₃, were recorded with a MOM derivatograph under static air atmosphere over the temperature range from ambient to 1050°C. Only HfO₂, Nd₂O₃, Pr₆O₁₁, Sm₂O₃ and Tb₄O₇ showed appreciable weight losses due to the liberation of small amounts of oxygen. X-ray diffractometry was used to identify the thermal degradation products and their precursors.     

Preparation of nanocrystalline BiFeO3 and kinetics of thermal process of precursor

The Bi₂Fe₂(C₂O₄)₅·5H₂O was synthesized by solid-state reaction at low heat using Bi(NO₃)₃·5H₂O, FeSO₄·7H₂O, and Na₂C₂O₄ as raw materials. The nanocrystalline BiFeO₃ was obtained by calcining Bi₂Fe₂(C₂O₄)₅·5H₂O at 600 °C in air. The precursor and its calcined products were characterized by thermogravimetry and differential scanning calorimetry, FT-IR, X-ray powder diffraction, and vibrating sample magnetometer. The data showed that highly crystallized BiFeO₃ with hexagonal structure [space group R3c(161)] was obtained when the precursor was calcined at 600 °C in air for 1.5 h. The thermal process of the precursor in air experienced five steps which involved, at first, the dehydration of an adsorption water molecule, then dehydration of four crystal water molecules, decomposition of FeC₂O₄ into Fe₂O₃, decomposition of Bi₂(C₂O₄)₃ into Bi₂O₃, and at last, reaction of Bi₂O₃ and Fe₂O₃ into hexagonal BiFeO₃. Based on Starink equation, the values of the activation energies associated with the thermal process of Bi₂Fe₂(C₂O₄)₅·5H₂O were determined. Besides, the most probable mechanism functions and thermodynamic functions (ΔS ^≠, ΔH ^≠, and ΔG ^≠) of thermal processes of Bi₂Fe₂(C₂O₄)₅·5H₂O were also determined.     

Syntheses of Transition Metal Complexes of Pentafluorophenylhydrazine

By reaction of pentafluorophenylhydrazine with metal chlorides the complexes M(NH₂NHC₆F₅)₄Cl₂ (M = Co, Ni), M(NH₂NHC₆F₅)₂Cl₂ (M = Mn, Fe, Pd, Zn, Cd), Cu(NH₂NHC₆F₅)Cl, and Hg(NH₂NHC₆F₅)₂Cl were obtained. From Cr(CO)₆ and pentafluorophenylhydrazine the complex Cr(CO)₅(NH₂NHC₆F₅) was synthesized.     

Synthesis, crystal structures and in vitro antitumor activities of some arylantimony derivatives of analogues of demethylcantharimide

A series of novel arylantimony derivatives of analogues of demethylcantharimide with the formulae Ar_nSbL_(5−n) and Ar_nSbL^′_(5−n)(LH=N-hydroxy-demethyldehydrogencantharimide, L^′H=N-hydroxy-demethylcantharimide, n=3, 4; ArC₆H₅, 4-CH₃C₆H₄, 3-CH₃C₆H₄, 2-CH₃C₆H₄, 4-ClC₆H₄, 4-FC₆H₄) were synthesized and characterized by elemental analysis, IR, ¹H NMR and mass spectroscopy. The crystal structures of (C₆H₅)₄SbL, (4-CH₃C₆H₄)₃SbL₂ and (3-CH₃C₆H₄)₃SbL^′₂ were determined by X-ray diffraction. The in vitro antitumor activities of all compounds against six cancer cells are reported.     

Laser flash photolysis of fullerols of C60 and of C70 in aqueous solutions

Fullerols of C₆₀ and of C₇₀ [C₆₀(OH)_n, C₇₀(OH)_m], water-soluble fullerene derivatives, unlike some other fullerene derivatives (such as C₆₀ (C₄H₆O), C₆₀ (C₃H₇N) and C₆₀ [C(COOEt)₂]_x), do not result in excited triplet state but in ionization via monophotonic process in aqueous solutions with 248 nm laser. The quantum yields of formation of hydrated electron (Φ_e ⁻) are determined to be 0.08 and 0.11 for fullerols of C₆₀ and of C₇₀ respectively at room temperature (ca. 15°C) with KI solution used as reference. By laser flash photolysis and oxidation of sulfate radical anion SO₄ ⁻, the fullerol radical cation or neutral radical of C₆₀ is confirmed to be existent and the transient absorption spectra of fullerol radical cation of C₇₀ are observed for the first time. Project supported by the National Natural Science Foundation of China     

Effect of oxides of the IV and VI group metals on the polymorphic transformation of anatase into rutile

An effect of some metal oxides on the polymorphic transformation of anatase into rutile and on the rate of dissociation of V₂O₅ in the systems V₂O₅-TiO₂ and V₂O₅-TiO₂-Me_xO_y has been studied, where Me_xO_y is SnO₂, WO₃, Cr₂O₃ or ZrO₂.     

石墨型氮化碳对氨硼烷放氢性能的影响

利用石墨型氮化碳(C₃N₄)和氨硼烷(NH₃BH₃,AB)球磨制备了AB-C₃N₄体系,发现C₃N₄的加入使AB放氢反应温度明显降低,但是副产物氨气浓度有所升高. 因此,利用LiBH₄改性的C₃N₄(LC₃N₄)同AB球磨合成出了AB-LC₃N₄体系,并采用X射线衍射、程序升温脱附-质谱联用、热重-差热分析及核磁共振等技术考察了该体系的脱氢性能. 结果表明,由于LC₃N₄的加入,AB的放氢反应温度明显降低,放氢反应速率加快,放氢诱导期缩短,同时抑制了副产物无机苯的生成. 另外,C₃N₄的化学修饰也降低了AB-LC₃N₄放氢过程中生成氨气的浓度. 动力学分析和核磁共振结果表明,AB-LC₃N₄分解过程依然遵循NH₃BH₂NH₃BH₄诱导的氨硼烷自分解机理.     

Analytical applications of the reaction of thorium with benzenephosphonic acid

Benzenephosphonic acid quantitatively precipitates thorium as Th(C₆H₅PO₃)₂·3H₂O at pH values as low as 0.5. The compound may be dried at 140° to 180° C and weighed, as a gravimetric means of determining thorium. On ignition, Th (C₂H₅PO₃)₂ 3 H₂O undergoes decomposition at 240° to 300° C to form Th(C₆H₅PO₃)₂·2H₂O, at 450° to 650° C to form Th(HPO₄)₂·2H₂O and finally at 800° to 1000° C to form Th(HPO₄)₂. The latter compound is stable to 1200° C.Potentiometrically (pK₁' = 0.91, pK₂' = 6.41) and spectrophotometrically (pK₁' = 0.96, pK₂' = 6.51) determined pK' values are reported. Absorption spectra of C₆H₅PO₃H₂, C₆H₅PO₃H^- and C₆H₅PO₃^-2 are reported. The solubility of Th (C₆H₅PO₃)₂·3H₂O was studied as a function of pH and the average value of the solubility product (K_sp = 4s³) was found to be 3.24·10^-31.     

Synthesis of Inorganic Structural Isomers By Diffusion‐Constrained Self‐Assembly of Designed Precursors: A Novel Type of Isomerism

The structure of precursors is used to control the formation of six possible structural isomers that contain four structural units of PbSe and four structural units of NbSe₂: [(PbSe)_1.14]₄[NbSe₂]₄, [(PbSe)_1.14]₃[NbSe₂]₃[(PbSe)_1.14]₁[NbSe₂]₁, [(PbSe)_1.14]₃[NbSe₂]₂[(PbSe)_1.14]₁[NbSe₂]₂, [(PbSe)_1.14]₂[NbSe₂]₃[(PbSe)_1.14]₂[NbSe₂]₁, [(PbSe)_1.14]₂[NbSe₂]₂[(PbSe)_1.14]₁[NbSe₂]₁[(PbSe)_1.14]₁[NbSe₂]₁, [(PbSe)_1.14]₂[NbSe₂]₁[(PbSe)_1.14]₁[NbSe₂]₂[(PbSe)_1.14]₁[NbSe₂]₁. The electrical properties of these compounds vary with the nanoarchitecture. For each pair of constituents, over 20 000 new compounds, each with a specific nanoarchitecture, are possible with the number of structural units equal to 10 or less. This provides opportunities to systematically correlate structure with properties and hence optimize performance.     

Photochemical Reaction of Decacarbonyldirhenium with Thiophene and Crystal Structure of Tetradecacarbonylhydridotrirhenium

The photochemical reaction of Re₂(CO)₁₀ with thiophene in hexane solution was investigated under vacuum. Three rhenium clusters: H₂Re₃(CO)₁₂, HRe₃(CO)₁₄ and Re₃(CO)₁₄(OH)₄, were isolated. The structure of Fellmann-Kaesz cluster Complex HRe₃(CO)₁₄ was determined by use of the X-ray diffraction method. The three rhenium atoms form a plane of symmetry and L: Re₁Re₂Re₃ is 107°. The ten carbonyl groups bonded to the two terminal rhenium atoms Re₁ and Re₃, are staggered with respect to the central rhenium atoms. The bond lengths are 3.10 Å for Re₂-Re₃ and 3.34 Å for Re₁-Re₂. The bridging hydride is between Re₁ and Re₂.     

Kinetic Analysis of the Decomposition of Chelates of Di-alkyldithiocarbamate of Cd(II)

The thermal decomposition kinetics of the solid complexes Cd(S₂ CNR₂ )₂ , where R =C₂ H₅ , n -C₃ H₇ , n -C₄ H₉ or iso -C₄ H₉ , was studied by using isothermal and non-isothermal thermogravimetry. The superimposed TG/DTG/DSC curves revealed that thermal decomposition reactions occur in the liquid phase. The kinetic model that best fitted the experimental isothermal TG data was the one-dimensional phase-boundary reaction-controlled process R₁ . The thermal analysis data suggested the thermal stability sequence Cd(S₂ CNBuⁿ ₂ )₂ >Cd(S₂ CNPrⁿ ₂ )₂ >Cd(S₂ CNBuⁱ ₂ )₂ >Cd(S₂ CNEt₂ )₂ , which accords with the sequence of stability of the apparent activation energies. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effect of pretreatment of HDS activity of supported NiW and NiMo catalysts

The hydrodesulfurization activity of sulfided NiMoO_x/Al₂O₃, NiWO_x/Al₂O₃ and NiWO_x/SiO₂−Al₂O₃ has been measured in different pretreatment conditions. Pretreatment conditions and the respective sulfur contents for optimum activities were defined.     

Experimental and chemical kinetic study of the pyrolysis of trifluoroethane and the reaction of trifluoromethane with methane

A detailed reaction mechanism is developed and used to model experimental data on the pyrolysis of CHF₃ and the non-oxidative gas-phase reaction of CHF₃ with CH₄ in an alumina tube reactor at temperatures between 873 and 1173 K and at atmospheric pressure. It was found that CHF₃ can be converted into C₂F₄ during pyrolysis and CH₂CF₂ via reaction with CH₄. Other products generated include C₃F₆, CH₂F₂, C₂H₃F, C₂HF₃, C₂H₆, C₂H₂ and CHF₂CHF₂. The rate of CHF₃ decomposition can be expressed as 5.2×10¹³ [s−1] e−295[kJ mol−1]/RT. During the pyrolysis of CHF₃ and in the reaction of CHF₃ with CH₄, the initial steps in the reaction involve the decomposition of CHF₃ and subsequent formation of CF₂ difluorocarbene radical and HF. It is proposed that CH₄ is activated by a series of chain reactions, initiated by H radicals. The NIST HFC and GRI-Mech mechanisms, with minor modifications, are able to obtain satisfactory agreement between modelling results and experimental data. With these modelling analyses, the reactions leading to the formation of major and minor products are fully elucidated.     

Kinetic Analysis of the Thermal Decomposition of Dialkyldithiocarbamates Chelates of Indium(III)

The kinetics of thermal decomposition of solid In(S₂CNR₂)₃ complexes, (R=CH₃, C₂H₅, n-C₃H₇,i-C₃H₇, n-C₄H₉ and i-C₄H₉), has been studied using isothermal and non-isothermal thermogravimetry. Superimposed TG/DTG/DSC curves show that thermal decomposition reactions occur in the liquid phase, except for the In(S₂CNMe₂)₃ and In(S₂CNPrⁱ ₂)₃ compounds. This revised version was published online in July 2006 with corrections to the Cover Date.     

The confirmation of the formation of clathrate-like hydrates of poly(tetrabutylammonium ethenesulfonate) and of poly(tetraisopentylammonium ethenesulfonate)

A thermal method using differential scanning calorimeter has been applied to aqueous solutions of a series of poly(tetraalkylammonium ethenesulfonates) (R₄NPES). It was found that only the salts withR=n-C₄H₉ andR=i-C₅H₁₁ could form stable hydrates having large hydration numbers. The melting point and hydration numbers of these two hydrates were 12.0°C and 30±1 for the (n-C₄H₉)₄NPES hydrate and 16.0°C and 53±2 for the (i-C₅H₁₁)₄NPES hydrate, respectively. It was concluded that these hydrates were clathrate-like essentially similar to such hydrates as (n-C₄H₉)₄NF·30H₂O and (i-C₅H₁₁)₄NF·40H₂O.     

Catalytic effects of six inorganic compounds on pyrolysis of three kinds of biomass

Six inorganic compounds, i.e., Na₂CO₃, NaOH, NaCl, Na₂SiO₃, TiO₂ and HZSM-5, have been investigated with regard to their catalytic effects on pyrolysis of three biomass species, i.e., pine wood, cotton stalk and fir wood by thermal analysis experiments. The results show that Na₂CO₃, NaOH, Na₂SiO₃ and NaCl made devolatilization occur at lower temperature regions in the pyrolysis of the three kinds of biomass, whereas TiO₂ and HZSM-5 made that occur at higher temperature regions in the pyrolysis of cotton stalk and had no obvious effects on pyrolysis temperatures of pine wood and fir wood. The basic catalysts NaOH, Na₂CO₃ and Na₂SiO₃ decreased the maximum weight loss rates while NaCl and HZSM-5 increased them and TiO₂ had no obvious effects on them. The four sodium compounds made pyrolysis of the three kinds of biomass more exothermic, which might be due to more char formation, whereas TiO₂ and HZSM-5 had minor effects on reaction heat. The catalytic effects in all aspects were roughly correlated with one another and their relationship with the basicity and acidity of the catalysts were preliminarily described and analyzed.     

Phase diagrams of binary systems of alkylammonium tetrachlorometallates(II)

The phase diagrams of four binary systems (C₁₀H₂₁NH₃)₂CoCl₄?(C₁₆H₃₃NH₃)₂CoCl₄, (C₁₂H₂₅NH₃)₂CoCl₄?(C₁₆H₃₃NH₃)₂CoCl₄, (C₁₀H₂₁NH₃)₂ZnCl₄?(C₁₆H₃₃NH₃)₂ZnCl₄ and (C₁₂H₂₅NH₃)₂ZnCl₄?(C₁₆H₃₃NH₃)₂ZnCl₄ were investigated by means of DSC. These six compounds and their binary mixtures can retain energies between 74 and 115 J/g during solid-state transformations at temperatures between 70 and 105°C, and they are therefore being considered for potential use in solar energy systems.