Neutral and acidic products derived from hydroxyl radical‐induced oxidation of arabinotriose assessed by electrospray ionisation mass spectrometry

The oxidation of α‐(1 → 5)‐l ‐arabinotriose (Ara₃), an oligosaccharide structurally related to side chains of coffee arabinogalactans, was studied in reaction with hydroxyl radicals generated under conditions of Fenton reaction (Fe²⁺/H₂O₂). The acidic and neutral oxidation products were separated by ligand exchange/size‐exclusion chromatography, subsequently identified by electrospray ionisation mass spectrometry (ESI–MS) and structurally characterised by tandem MS (ESI–MS/MS). In acidic fraction were identified several oxidation products containing an acidic residue at the corresponding reducing end of Ara₃, namely arabinonic acid, and erythronic, glyceric and glycolic acids formed by oxidative scission of the furanose ring. In neutral fractions were identified derivatives containing keto, hydroxy and hydroperoxy moieties, as well as derivatives resulting from the ring scission at the reducing end of Ara₃. In both acidic and neutral fractions, beyond the trisaccharide derivatives, the corresponding di‐ and monosaccharide derivatives were identified indicating the occurrence of oxidative depolymerisation. The structural characterisation of these oxidation products by ESI–MS/MS allowed the differentiation of isobaric and isomeric species of acidic and neutral character. The species identified in this study may help in detection of roasting products associated with the free radical‐mediated oxidation of coffee arabinogalactans. Copyright © 2014 John Wiley & Sons, Ltd.     

Kinetic and equilibrium studies of urea adsorption onto activated carbon: Adsorption mechanism

We found that activated carbon effectively removed urea from solution and that urea adsorption onto activated carbon followed a pseudo-second-order kinetic model. We classified the urea adsorption on activated carbon as physical adsorption and found that it was best described by the Halsey adsorption isotherm, suggesting that the multilayer adsorption of urea molecules on the adsorption sites of activated carbon best characterized the adsorption system. The mechanism of adsorption of urea by activated carbon involved two steps. First, an amino (–NH₂) group of urea interacted with a carbonyl (–C?O) group and a hydroxyl (?OH) group on the surface of activated carbon via dipole–dipole interactions. Next, the –C?O group of the urea molecule adsorbed to the activated carbon interacted with another –NH₂ group from a second urea molecule, leading to multilayer adsorption.     

Lanthanide complexes of D-penicillamine: formation constants,spectral and thermal properties

The complex-formation of lanthanide(III) elements with D-penicillamine have been investigated in acidic and neutral media. The macroscopic protonation constants of the ligand and the formation constants of [Ln.Pen]⁺, [Ln.Pen₂]^?, [Ln.Pen.OH] and [Ln.Pen.(OH)₂]^? complexes were determined from pH-metric data using the BEST computer program. Elemental analyses of the solid complexes indicate formation of 1?:?1 metal?:?ligand species. The binding sites in the complexes with the possible role of –COO^?, –NH₂ and –SH groups in the coordination have been discussed using infrared data. The complexes decompose in four steps as shown by their t.g. and d.t.a. analyses. A mechanism of decomposition is proposed which is supported by mass spectral data.     

Thermal decomposition of model compound of algal biomass

This contribution investigates thermal decomposition of leucine, as a representative model compound for amino acids in algal biomass. We map out potential energy surface for a wide array of unimolecular and self-condensation reactions operating in the decomposition of leucine. Decarboxylation and dehydration of leucine ensues by eliminating CO₂ and –OH, respectively, from the –COOH group attached to the α-carbon. The molecular channel for deamination involves cleavage of NH₂ from α-carbon of leucine. The activation energies for direct elimination of CO₂, NH₃, and H₂O from a leucine molecule lie within 20.7 kJ/mol of each other. Activation energies for these decomposition pathways reside below the bond dissociation enthalpy of H–C(α) of 323.1 kJ/mol. The decarboxylation, deamination, and dehydration pathways, via radical-prompted pathways, systematically require lower energy barriers, in reference to closed-shell reaction corridors. Detailed computations at the CBS-QB3 level provide the Arrhenius rate parameters for the unimolecular and bimolecular reactions, and standard enthalpies of formation, standard entropies, and heat capacities for all the products and intermediates. A kinetic analysis of gas-phase reactions, within the context of a plug-flow reactor model, accounts qualitatively for the formation of major products observed experimentally in the thermal degradation of the condensed-phase leucine. Among notable N-containing species, the model predicts the prevailing of NH₃ over HCN and HNCO, in addition to corresponding appreciable concentrations of amines, imines, and nitriles. Our detailed kinetic investigation illustrates a negligible contribution of the self-condensation reactions of leucine in the gas phase.     

Efficient acid catalytic synthesis of pyrazolopyrimidines from 1H-pyrazol-5-yl-N,N-dimethylformamidines with cyanamide

The efficient acid catalytic synthesis of pyrazolo [3,4-d]pyrimidine was developed by treating 1H-pyrazol-5-yl-N,N-dimethylformamidine with various aminating agents including N,O-bis(trimethylsilyl)hydroxylamine (NHSiMe₃(OSiMe₃)), cyanamide (NH₂CN), hydroxylamine (NH₂OH), methoxyamine (NH₂OMe), hydrazine (NH₂NH₂), and urea (NH₂C(O)NH₂) in acidic solution at reflux. Based on the experimental result, cyanamide (NH₂CN) and methanesulfonic acid were indicated the best aminating agent and acid mediated solvent. On the other hands, the reactivity tendency was involved the activity of original leaving species grafting on the aminating agents, such as –OH, –OMe, –OSiMe₃, –NH₂, –OSiMe₃, –C(O)NH₂, and –CN, in acid catalytic heterocyclic reaction.     

Nitrogen-15 nuclear magnetic resonance spectroscopy. N?H proton exchange reactions of urea and substituted ureas

Proton-coupled nitrogen-15 NMR spectra of urea, N-methylurea, N,-N′-dimethylurea, N-methyl-N′-benzylurea and N-phenylurea have been obtained at natural abundance level in neutral, basic and acidic solutions at 25°C. Base-catalyzed N? H proton exchange of the ? NH₂ group of N-methylurea in water was found to be 1.5 times faster than that for the -NH- group, while the corresponding acid-catalyzed exchange is 7.5 times faster. Comparison of urea and N,-N′-dimethylurea in water shows urea to be 10 times faster in base but 2 times slower in acid. The ratio of the base-catalyzed N? H proton exchanges of the two -NH- groups of N-methyl-N′-benzylurea in dimethyl sulfoxide is close to unity, whereas the CH₃NH- group exchanges 4 times faster in acid. Similarly, the C₆H₅NH- group of N-methyl-N′-phenylurea exchanges 50 times faster than the CH₃NH- group in base and about 3 orders of magnitude slower in acid. The results are rationalized by consideration of steric and electronic effects.     

Synthesis,X‐ray structure,characterization and catalytic activity of a polymeric manganese(II) complex with iminodiacetate

A polymeric manganese(II) complex with the general formula [Mn(O₂CCH₂NH₂CH₂CO₂)₂(H₂O)₂]_n from reaction of iminodiacetatic acid and manganese(II) perchlorate under nitrogen in water, was synthesized and characterized. The structure of the complex was determined using single‐crystal X‐ray diffraction, elemental analysis, IR and UV‐vis spectra. This complex exhibited excellent catalytic activity and selectivity for oxidation of various alcohols and sulfides to the corresponding aldehydes/ketone and sulfoxides using urea hydrogen peroxide and oxone (2KHSO₅·KHSO₄·K₂SO₄), respectively, as oxidants under air at room temperature. The easy preparation, mild reaction conditions, high yields of the products, short reaction time, no over‐oxidation products, high selectivity and inexpensive system make this catalytic system a useful method for oxidizing various alcohols and sulfides. Copyright © 2011 John Wiley & Sons, Ltd.     

Efficient Aerobic Wacker Oxidation of Styrenes Using Palladium Bis(isonitrile) Catalysts

The palladium‐catalyzed aerobic oxidation of alkenes and especially styrenes (Wacker oxidation) by using chiral pseudo C₂‐symmetrical bis(isonitrile) ligands in the absence of further cocatalysts gives rise to methyl ketones in a highly chemoselective manner. The palladium bis(isonitrile) catalyst was characterized by NMR spectroscopy and X‐ray structure analysis, revealing a dissymmetric coordination of palladium by the two isonitrile moieties.     

Selective and Efficient Oxidation of Sulfides to Sulfoxides Using Ceric Ammonium Nitrate (CAN)/Brönsted Acidic Ionic Liquid

A selective and efficient procedure for the oxidation of sulfides to the corresponding sulfoxides is reported using ceric ammonium nitrate in the presence of methylimidazolium hydrogensulfate as Brönsted acidic ionic liquid ([Hmim]HSO ₄ ) as the solvent under mild conditions. The use of nontoxic and inexpensive materials, straightforward procedure, short reaction times, and good yields of the products are the major advantages of this method.     

Proton Transfer Accompanied by the Oxidation of Adenosine

Despite numerous experimental and theoretical studies, the proton transfer accompanying the oxidation of 2′-deoxyadenosine 5′-monophosphate 2’-deoxyadenosine 5’-monophosphate (5’-dAMP, A ) is still under debate. To address this issue, we have investigated the oxidation of A in acidic and neutral solutions by using transient absorption (TA) and time-resolved resonance Raman (TR³) spectroscopic methods in combination with pulse radiolysis. The steady-state Raman signal of A was significantly affected by the solution pH, but not by the concentration of adenosine (2–50 mm ). More specifically, the A in acidic and neutral solutions exists in its protonated ( A H⁺(N1+H⁺)) and neutral ( A ) forms, respectively. On the one hand, the TA spectral changes observed at neutral pH revealed that the radical cation ( A ^.+) generated by pulse radiolysis is rapidly converted into A ^.(N6−H) through the loss of an imino proton from N6. In contrast, at acidic pH (<4), A H^.2+(N1+H⁺) generated by pulse radiolysis of A H⁺(N1+H⁺) does not undergo the deprotonation process owing to the pK_a value of A H^.2+(N1+H⁺), which is higher than the solution pH. Furthermore, the results presented in this study have demonstrated that A , A H⁺(N1+H⁺), and their radical species exist as monomers in the concentration range of 2–50 mm . Compared with the Raman bands of A H⁺(N1+H⁺), the TR³ bands of A H^.2+(N1+H⁺) are significantly down-shifted, indicating a decrease in the bond order of the pyrimidine and imidazole rings due to the resonance structure of A H^.2+(N1+H⁺). Meanwhile, A ^.(N6−H) does not show a Raman band corresponding to the pyrimidine+NH₂ scissoring vibration due to diprotonation at the N6 position. These results support the final products generated by the oxidation of adenosine in acidic and neutral solutions being A H^.2+(N1+H⁺) and A ^.(N6−H), respectively.     

Environmental effects of chitosan as an immobilization medium for electrochemically active small molecules

Abstract

A number of challenges arise when using ferrocene as a component of electrochemical biosensors, including solubility in aqueous solutions. Therefore, entrapment of the biotin-ferrocene molecules within the chitosan film provides a route for immobilization on an electroactive surface such as an electrode while making the system water compatible. The use of the chitosan-ferrocene bioconjugate thin film on the electrode surface produces a signal that can be monitored in aqueous media. Herein, we discuss a series of modified ferrocene molecules that contain various linkers that provide non-covalent entanglement points to the chitosan medium. The electrochemical analysis and electron microscopy results show marked differences in the ferrocene loaded chitosan polymers when the termini of the ferrocene-linker vary between –SH and –NH₂. The –SH modified systems showed increased reversible and robust electrochemical signals relative to the –NH₂ congeners. Further studies showed that non-covalent impregnation strategy used is robust to degradation and less than 1% of the ferrocene molecules were leached over time. These results indicate that there are specific considerations needed when using chitosan-ferrocene systems as components in sensor arrays in future studies.     

Ammonia Synthesis at Room Temperature and Atmospheric Pressure from N2: A Boron-Radical Approach

Ammonia, NH₃, is an essential molecule, being part of fertilizers. It is currently synthesized via the Haber–Bosch process, from the very stable dinitrogen molecule, N₂ and dihydrogen, H₂. This process requires high temperatures and pressures, thereby generating ca 1.6 % of the global CO₂ emissions. Alternative strategies are needed to realize the functionalization of N₂ to NH₃ under mild conditions. Here, we show that boron-centered radicals provide a means of activating N₂ at room temperature and atmospheric pressure whilst allowing a radical process to occur, leading to the production of borylamines. Subsequent hydrolysis released NH₄⁺, the acidic form of NH₃. EPR spectroscopy supported the intermediacy of radicals in the process, corroborated by DFT calculations, which rationalized the mechanism of the N₂ functionalization by R₂B radicals.     

A pH‐Neutral,Metal‐Free Aqueous Organic Redox Flow Battery Employing an Ammonium Anthraquinone Anolyte

Redox‐active anthraquinone molecules represent promising anolyte materials in aqueous organic redox flow batteries (AORFBs). However, the chemical stability issue and corrosion nature of anthraquinone‐based anolytes in reported acidic and alkaline AORFBs constitute a roadblock for their practical applications in energy storage. A feasible strategy to overcome these issues is migrating to pH‐neutral conditions and employing soluble AQDS salts. Herein, we report the 9,10‐anthraquinone‐2,7‐disulfonic diammonium salt AQDS(NH₄)₂ , as an anolyte material for pH‐neutral AORFBs with solubility of 1.9 m in water, which is more than 3 times that of the corresponding sodium salt. Paired with an NH₄I catholyte, the resulting pH‐neutral AORFB with an energy density of 12.5 Wh L^?1 displayed outstanding cycling stability over 300 cycles. Even at the pH‐neutral condition, the AQDS(NH₄)₂ /NH₄I AORFB delivered an impressive energy efficiency of 70.6 % at 60 mA cm^?2 and a high power density of 91.5 mW cm^?2 at 100 % SOC. The present AQDS(NH₄)₂ flow battery chemistry opens a new avenue to apply anthraquinone molecules in developing low‐cost and benign pH‐neutral flow batteries for scalable energy storage.     

A pH‐Neutral,Metal‐Free Aqueous Organic Redox Flow Battery Employing an Ammonium Anthraquinone Anolyte

Redox‐active anthraquinone molecules represent promising anolyte materials in aqueous organic redox flow batteries (AORFBs). However, the chemical stability issue and corrosion nature of anthraquinone‐based anolytes in reported acidic and alkaline AORFBs constitute a roadblock for their practical applications in energy storage. A feasible strategy to overcome these issues is migrating to pH‐neutral conditions and employing soluble AQDS salts. Herein, we report the 9,10‐anthraquinone‐2,7‐disulfonic diammonium salt AQDS(NH₄)₂ , as an anolyte material for pH‐neutral AORFBs with solubility of 1.9 m in water, which is more than 3 times that of the corresponding sodium salt. Paired with an NH₄I catholyte, the resulting pH‐neutral AORFB with an energy density of 12.5 Wh L^?1 displayed outstanding cycling stability over 300 cycles. Even at the pH‐neutral condition, the AQDS(NH₄)₂ /NH₄I AORFB delivered an impressive energy efficiency of 70.6 % at 60 mA cm^?2 and a high power density of 91.5 mW cm^?2 at 100 % SOC. The present AQDS(NH₄)₂ flow battery chemistry opens a new avenue to apply anthraquinone molecules in developing low‐cost and benign pH‐neutral flow batteries for scalable energy storage.     

Study of degradation behavior of besifloxacin,characterization of its degradation products by LC–ESI–QTOF–MS and their in silico toxicity prediction

Knowledge and understanding of the stability profile of a drug is important as it affects its safety and efficacy. In the present work, besifloxacin, a new, fourth‐generation fluoroquinolone antibiotic, was subjected to different forced‐degradation conditions as per International Conference on Harmonization (ICH) guidelines such as hydrolysis (acid, base and neutral), oxidation, thermal and photolysis. The drug degraded under acidic, basic, oxidative and photolytic conditions while it was found to be stable under dry heat and neutral hydrolytic conditions. In total, five degradation products (DPs) were formed under different conditions—DP1 and DP2 (photolysis), DP3 (oxidation), DP4 (acidic), DP3 and DP5 (basic). The chromatographic separation of besifloxacin and its degradation products was achieved on a Sunfire C₁₈ (250 mm × 4.6 mm, 5 μm) column with 0.1% aqueous formic acid–acetonitrile as a mobile phase. The gradient RP‐HPLC method was developed and validated as per ICH guidelines. The degradation products were characterized with the help of LC–ESI–QTOF mass spectrometric studies and the most likely degradation pathway of the drug was proposed. In silico toxicity assessment of the drug and its degradation products was carried out, which indicated that DP3 and DP4 carry a mutagenicity alert.     

Reactivity of some sulphur- and non-sulphur-containing amino acids towards water soluble colloidal MnO<Subscript>2</Subscript>. A kinetic study

Kinetic data for the oxidation of glutathione (reduced, GSH), cysteine, glycine and glutamic acid by colloidal manganese dioxide, (MnO₂) _n are reported. Colloidal MnO₂, oxidized glutathione to disulphide (glutathione, oxidized), was reduced to manganese (II). Glycine and glutamic acid (structural units of glutathione) are not oxidized by colloidal MnO₂, but the other structural unit, cysteine, is also oxidized by the same oxidant under similar experimental conditions. This is interpreted in terms of the rate-determining colloidal MnO₂-S bonded intermediate. The reactivity of GSH towards colloidal MnO₂ is very much higher than cysteine. Kinetics of oxidation of GSH and cysteine by colloidal MnO₂ were performed spectrophotometrically as a function of [GSH], [cysteine], colloidal [(MnO₂) _n ], [HClO₄], temperature and trapping agents sodium fluoride and manganese (II) (reduction product of colloidal MnO₂). The purpose of this work was to study the role of –NH₂, –COOH, –SH groups present in the carbon chain of the above amino acids. It was found that the reactivity of –SH group is higher than –NH₂ and –COOH groups. The mechanisms, involving a colloidal MnO₂ complex with GSH and cysteine, are proposed. The complexes decompose in a rate-determining step, leading to the formation of free radical and manganese (III), which is also an intermediate. The dimerization of radicals takes place in a subsequent fast step to yield the products.     

Synthesis and catalytic properties of a series of cobalt porphyrins as cytochrome P450 model: the effect of substituents on the catalytic activity

A series of cobalt porphyrins derived from hemin was prepared as cytochrome P450 models. Effects of substituents at the cobalt deuteroporphyrin-propionate side chains are investigated in oxidation of toluene with air to benzaldehyde and benzyl alcohol without the use of solvent and sacrificial co-reductant. The catalytic activity of cobalt porphyrins depends on the type of substituents. When the electron-withdrawing groups like –Cl, –Br, were introduced into the double propionate side chains, they can increase the catalyst stability and selectivity to benzaldehyde. In comparison with these electron-withdrawing groups, the electron-donor groups, such as –CH₃, –S–S– and –NH₂ groups, can improve their catalytic activities. Moreover, the electron-donor group containing an unpaired electron (such as –S–S–, –NH₂) is benefit for improving its catalytic efficiency and promoting the electron delivery. It can be concluded that the double propionate side chains in the deuteroporphyrin complex may participate in oxidation process and effect electron transfer from the high-valent metalloporphyrin species to the substrate.     

Polynitrile anions as ligands: From magnetic polymeric architectures to spin crossover materials

The use of polynitrile anions as ligands (L) either alone or in combination with neutral co-ligands (L′) is a very promising and appealing strategy to get molecular architectures with different topologies and dimensionalities thanks to their ability to coordinate and bridge metal ions in many different ways. The presence of several potentially coordinating nitrile groups (or even other donor groups as –OH, –SH or –NH₂), their rigidity and their electronic delocalization allow the synthesis of original magnetic high dimensional coordination polymers with transition metals ions. Furthermore, these ligands have shown coordinating and bridging capabilities in novel discrete and polymeric bistable materials (materials showing original magnetic behaviours or spin crossover (SCO) transitions). Here we report an overview of the results obtained with some of these modified polynitrile ligands, showing their rich coordination chemistry and their crucial role in new molecular materials exhibiting unusual magnetic transitions.     

Heterogenous Oxidation of [2.2.1] Bridged Bicyclic Alkenes with KMnO4-CuSO4.5H2O: An Alternative Ozonolysis

Seven [2.2.1] bridged alkenes were cleaved to the corresponding dialdehyde products by neutral heterogenous oxidation with KMnO₄-CuSO₄.5H₂O. While endo, endo-dimethyl bicyclo[2.2.2]oct-5-ene-2,3-dicarboxylate, [2.2.2] bridged alkene, gave the corresponding α-hydroxy ketone, endo, endo-dimethyl bicyclo[3.2.2]non-8-ene-6,7-dicarboxylate afforded a diketone product.     

单核钌催化剂化学催化和光催化水氧化反应

合成了一系列含有不同对位取代基团的吡啶轴向配体的单核钌化合物Ru(bda)(pic)₂ (H₂bda=2,2''-联吡啶-6,6''-二羧酸; pic=对甲基吡啶),对化合物的结构进行了核磁、质谱和X射线单晶衍射表征,并在中性和酸性条件下研究了这些化合物的电化学性质.以硝酸铈铵为氧化剂,对催化剂的催化活性进行了测试,并以[Ru(bpy)₃]²⁺为光敏剂,S₂O₈^2-为电子牺牲剂,在三组分体系中考察了这些化合物的光催化活性.研究发现,在化学法水氧化反应中,化合物1由于其轴向配体4,4''-联吡啶在酸性条件下能够发生质子化,从而增强了吸电子效应,因此表现出最高的催化活性,催化循环数达到4000.在光催化水氧化反应中,化合物2因其轴向配体具有最强的吸电子能力而表现出最高的催化活性,反应2h的催化循环数达到270.结果表明,轴向配体的吸电子能力明显提高了这类Ru催化剂催化水氧化反应活性.