Growth Parameters,Photosynthetic Performance,and Biochemical Characterization of Newly Isolated Green Microalgae in Response to Culture Condition Variations

This work aimed to characterize two native microalgal strains newly isolated from South Mediterranean areas and identified as Chlorella sorokiniana ES3 and Neochloris sp. AM2. The growth properties and biochemical composition of these microalgae were evaluated in different culture media (Algal, BG-11, f/2, and Conway). Among the tested media, nitrate- and phosphate-rich Algal medium provided the maximum biomass productivities (85.5 and 111.5 mg l^?1 day^?1 for C. sorokiniana and Neochloris sp., respectively), while the nitrate- and phosphate-deficient f/2 medium resulted in the highest lipid productivities (24.1 and 35.8 mg l^?1 day^?1 for C. sorokiniana and Neochloris sp., respectively). The physiological state of both microalgae was investigated under different light and temperature levels using the pulse amplitude-modulated fluorometry. The better photosynthetic efficiency of C. sorokiniana was obtained at 23 °C with a light saturation of 156 μE m^?2 s^?1, while that of Neochloris sp. was achieved at 15 °C with a light saturation of 151 μE m^?2 s^?1. The analysis of fatty acid profile and biodiesel parameters revealed that C. sorokiniana, cultivated in Algal and f/2 media, can be considered as a suitable candidate for high-quality biodiesel production.     

Production of Indirubin from Tryptophan by Recombinant Escherichia coli Containing Naphthalene Dioxygenase Genes from Comamonas sp. MQ

Indirubin, a red isomer of indigo, can be used for the treatment of various chronic diseases. However, the microbial production of indirubin did not receive much attention probably due to its low yield compared with indigo. In this study, the recombinant Escherichia coli containing the naphthalene dioxygenase (NDO) genes from Comamonas sp. MQ was used to produce indirubin from tryptophan. To enhance the production of indirubin, the induction conditions for NDO expression were optimized. The optimal induction conditions were carried out with 0.5 mM isopropyl-β-d-thiogalactopyranoside at 30 °C when cells were grown to OD₆₀₀?≈?1.20. Subsequently, the effects of medium composition on indirubin production were investigated by response surface methodology, and 9.37?±?1.01 mg/l indirubin was produced from 3.28 g/l tryptophan. Meanwhile, the indirubin production was further improved by adding 2-oxindole and isatin to the tryptophan medium after induction. About 57.98?±?2.62 mg/l indirubin was obtained by the addition of 500 mg/l 2-oxindole after 1-h induction, which was approximately 6.2-fold to that without additional 2-oxindole. The present study provided a possible way to improve the production of indirubin and should lay the foundation for the application of microbial indirubin production.     

Enzymatic Fractionation of SAA-Pretreated Barley Straw for Production of Fuel Ethanol and Astaxanthin as a Value-Added Co-Product

Barley straw was used to demonstrate an integrated process for production of fuel ethanol and astaxanthin as a value-added co-product. Barley straw was pretreated by soaking in aqueous ammonia using the previously determined optimum conditions, which included 77.6 °C treatment temperature, 12.1 h treatment time, 15 wt% ammonia concentration, and 1:8 solid-to-liquid ratio. In the newly developed process, the pretreated barley straw was first hydrolyzed with ACCELLERASE® XY (a commercial hemicellulase product) to generate a xylose-rich solution, which contained 3.8 g/l glucose, 22.9 g/l xylose, and 2.4 g/l arabinose, with 96 % of the original glucan being left intact. The xylose-rich solution was used for production of astaxanthin by the yeast Phaffia rhodozyma without further treatment. The resulting cellulose-enriched solid residue was used for ethanol production in a fed-batch simultaneous saccharification and fermentation using ACCELLERASE® 1500 (a commercial cellulase product) and the industrial yeast Saccharomyces cerevisiae. At the end of the fermentation, 70 g/l ethanol was obtained, which was equivalent to 63 % theoretical yield based on the glucan content of the solid substrate.     

Marine Diatom, Navicula sp. Strain JPCC DA0580 and Marine Green Alga, Chlorella sp. Strain NKG400014 as Potential Sources for Biodiesel Production

Marine diatom, strain JPCC DA0580, and marine green microalga strain NKG400014 were selected as high neutral lipid-producers from marine microalgal culture collection toward biodiesel production. These strains were tentatively identified as Navicula sp. and Chlorella sp., respectively, by 18S rDNA analysis. Growth and lipid accumulation conditions of both strains were analyzed by changing nutrient concentrations in growth media and initial illuminance intensity. The highest productivity of fatty acid methyl ester (FAME) reached to 154 mg/L/week for NKG400014 and 185 mg/L/week for JPCC DA0580. Gas chromatography/mass spectrometry analysis indicates that FAME fraction from NKG400014 mainly contained 9-12-15-octadecatrienoate (C18:3) and that from JPCC DA0580 mainly contained methyl palmitate (C16:0) and methyl palmitoleate (C16:1). Furthermore, calorimetric analysis revealed that the energy content of strain was 4,233?±?55 kcal/kg (i.e., 15.9?±?0.2 MJ/kg) for NKG400014 and 6,423?±?139 kcal/mg (i.e., 26.9?±?0.6 MJ/kg) for JPCC DA0580, respectively. The value from JPCC DA0580 was equivalent to that of coal. The strains NKG400014 and JPCC DA0580 will become a promising resource that can grow as dominant species in the open ocean toward production of both liquid and solid biofuels.     

Haematococcus pluvialis as a Potential Source of Astaxanthin with Diverse Applications in Industrial Sectors: Current Research and Future Directions

Haematococcus pluvialis, a green microalga, appears to be a rich source of valuable bioactive compounds, such as astaxanthin, carotenoids, proteins, lutein, and fatty acids (FAs). Astaxanthin has a variety of health benefits and is used in the nutraceutical and pharmaceutical industries. Astaxanthin, for example, preserves the redox state and functional integrity of mitochondria and shows advantages despite a low dietary intake. Because of its antioxidant capacity, astaxanthin has recently piqued the interest of researchers due to its potential pharmacological effects, which include anti-diabetic, anti-inflammatory, and antioxidant activities, as well as neuro-, cardiovascular-, ocular, and skin-protective properties. Astaxanthin is a popular nutritional ingredient and a significant component in animal and aquaculture feed. Extensive studies over the last two decades have established the mechanism by which persistent oxidative stress leads to chronic inflammation, which then mediates the majority of serious diseases. This mini-review provides an overview of contemporary research that makes use of the astaxanthin pigment. This mini-review provides insight into the potential of H. pluvialis as a potent antioxidant in the industry, as well as the broad range of applications for astaxanthin molecules as a potent antioxidant in the industrial sector.     

Nitrogen Limitation in Neochloris oleoabundans: A Reassessment of Its Effect on Cell Growth and Biochemical Composition

The aim of this work was to reassess the effect of nitrogen limitation (from 0 to 1 mM nitrate), on the growth and the biochemical composition of Neochloris oleoabundans cultures, where only the CO₂ available in the air was provided. Slight differences in the initial nitrate concentration, even minimal increments of 0.2 mM, significantly modify the microalgal response towards nitrogen limitation. This stress condition reduced cell proliferation, but increased cell mass values due to the simultaneous accumulation of two storage compounds: lipids, which contained up to a 55.9 % of total fatty acids; and carbohydrates, which may be primarily composed by starch. The highest biomass and lipid productivities of 98.24 and 43.24 mg/l/day, respectively, were attained at an initial nitrate concentration of 0.6 mM. The theoretical annual projection, based on these productivities, allowed the estimation of the liquid fuel energy yields, which are comparable or even higher than those calculated for several biomass feedstocks such as corn, oil palm, sugarcane, or even fast growing grasses, confirming the potential of nitrogen-limited N. oleoabundans biomass as an appropriate feedstock for biofuel purposes.     

Bioprospecting of Microalgae Isolated from the Adriatic Sea: Characterization of Biomass,Pigment, Lipid and Fatty Acid Composition,and Antioxidant and Antimicrobial Activity

Marine microalgae and cyanobacteria are sources of diverse bioactive compounds with potential biotechnological applications in food, feed, nutraceutical, pharmaceutical, cosmetic and biofuel industries. In this study, five microalgae, Nitzschia sp. S5, Nanofrustulum shiloi D1, Picochlorum sp. D3, Tetraselmis sp. Z3 and Tetraselmis sp. C6, and the cyanobacterium Euhalothece sp. C1 were isolated from the Adriatic Sea and characterized regarding their growth kinetics, biomass composition and specific products content (fatty acids, pigments, antioxidants, neutral and polar lipids). The strain Picochlorum sp. D3, showing the highest specific growth rate (0.009 h⁻¹), had biomass productivity of 33.98 ± 0.02 mg L⁻¹ day⁻¹. Proteins were the most abundant macromolecule in the biomass (32.83–57.94%, g g⁻¹). Nanofrustulum shiloi D1 contained significant amounts of neutral lipids (68.36%), while the biomass of Picochlorum sp. D3, Tetraselmis sp. Z3, Tetraselmis sp. C6 and Euhalothece sp. C1 was rich in glycolipids and phospholipids (75%). The lipids of all studied microalgae predominantly contained unsaturated fatty acids. Carotenoids were the most abundant pigments with the highest content of lutein and neoxanthin in representatives of Chlorophyta and fucoxanthin in strains belonging to the Bacillariophyta. All microalgal extracts showed antioxidant activity and antimicrobial activity against Gram-negative E. coli and S. typhimurium and Gram-positive S. aureus.     

l-Ribose Production from l-Arabinose by Immobilized Recombinant Escherichia coli Co-expressing the l-Arabinose Isomerase and Mannose-6-Phosphate Isomerase Genes from Geobacillus thermodenitrificans

l-Ribose is an important precursor for antiviral agents, and thus its high-level production is urgently demanded. For this aim, immobilized recombinant Escherichia coli cells expressing the l-arabinose isomerase and variant mannose-6-phosphate isomerase genes from Geobacillus thermodenitrificans were developed. The immobilized cells produced 99 g/l l-ribose from 300 g/l l-arabinose in 3 h at pH 7.5 and 60 °C in the presence of 1 mM Co²⁺, with a conversion yield of 33 % (w/w) and a productivity of 33 g/l/h. The immobilized cells in the packed-bed bioreactor at a dilution rate of 0.2 h^?1 produced an average of 100 g/l l-ribose with a conversion yield of 33 % and a productivity of 5.0 g/l/h for the first 12 days, and the operational half-life in the bioreactor was 28 days. Our study is first verification for l-ribose production by long-term operation and feasible for cost-effective commercialization. The immobilized cells in the present study also showed the highest conversion yield among processes from l-arabinose as the substrate.     

Production of a Bioemulsifier with Potential Application in the Food Industry

Biosurfactants are of considerable interest due to their biodegradability, low degree of toxicity, and diverse applications. However, the high production costs involved in the acquisition of biosurfactants underscore the need for optimization of the production process to enable viable application on an industrial scale. The aims of the present study were to select a species of Candida that produces a biosurfactant with the greatest emulsifying potential and to investigate the influence of components of the production medium and cultivation conditions. Candida utilis achieved the lowest surface tension (35.53 mN/m), best emulsification index (73 %), and highest yield (12.52 g/l) in a medium containing waste canola frying oil as the carbon source and ammonium nitrate as the nitrogen source. The best combination of medium components and cultivation conditions was 6 % (w/v) glucose, 6 % (w/v) waste canola frying oil, 0.2 % (w/v) ammonium nitrate, 0.3 % (w/v) yeast extract, 150 rpm, 1 % inoculum (w/v), and 88 h of fermentation. The greatest biosurfactant production and the lowest surface tension were achieved in the first 24 h of production, and the maximum biomass production was recorded at 72 h. The biosurfactant produced from C. utilis under the conditions investigated in the present study has a potential to be a bioemulsifier for application in the food industry.     

Production of Bioethanol from Fermented Sugars of Sugarcane Bagasse Produced by Lignocellulolytic Enzymes of Exiguobacterium sp. VSG-1

Exiguobacterium sp. VSG-1 was isolated from the soil sample and characterized for the production of lignocellulolytic enzymes. Production of these enzymes by the strain VSG-1 was carried out using steam-exploded sugarcane bagasse (SCB) and found to secrete cellulase, pectinase, mannanase, xylanase, and tannase. The growth and enzyme production were found to be optimum at pH 9.0 and 37 °C. Upon steam explosion of SCB, the cellulose increased by 42 %, whereas hemicelluloses and lignin decreased by 40 and 62 %, respectively. Enzymatic hydrolysis of steam-exploded SCB yielded 640 g/l of total sugars. Fermentation of sugars produced from pretreated SCB was carried out by using Saccharomyces cerevisiae at pH 5.0 and 30 °C. The alcohol produced was calculated and found to be 62.24 g/l corresponding to 78 % of the theoretical yield of ethanol. Hence, the strain VSG-1 has an industrial importance for the production of fermentable sugars for biofuels.     

Biosynthesis of Benzoylformic Acid from Benzoyl Cyanide with a New Bacterial Isolate of Brevibacterium sp. CCZU12-1

Brevibacterium sp. CCZU12-1 with high nitrilase activity could effectively hydrolyze benzoyl cyanide into benzoylformic acid. After the culture optimization, the preferred carbon sources, nitrogen sources, and inducer were glucose (10 g/L), a composite of peptone (10 g/L) plus yeast extract (2.5 g/L), and ε-caprolactam (2.0 mM), respectively. After the reaction optimization, the optimum reaction temperature, reaction pH, organic cosolvent, and metal ion were 30 °C, 7.0, ethanol (2 %, v/v), and Ca²⁺ (0.1 mM), respectively. At biotransformation of 120-mM benzoyl cyanide for 24 h, the yield of benzoylformic acid reached 91.8 %. Moreover, the microbial nitrilase from Brevibacterium sp. CCZU12-1 could hydrolyze various nitriles, and it significantly exhibited high nitrilase activity against benzoyl cyanide, 3-cyanopyridine, and α-cyclohexyl-mandelonitrile.     

Gene Cloning, Expression, and Characterization of a Cyclic Nucleotide Phosphodiesterase from Arthrobacter sp. CGMCC 3584

Based on thermal asymmetric interlaced polymerase chain reaction, the arpde gene encoding a cyclic nucleotide-specific phosphodiesterase was cloned from Arthrobacter sp. CGMCC 3584 for the first time. The 930-bp region encoded a 309-amino-acid protein with a molecular weight of 33.6 kDa. The recombinant ArPDE was able to hydrolyze 3′,5′-cAMP, 3′,5′-cGMP, and 2′,3′-cAMP. The K _m values of ArPDE for 3′,5′-cAMP and 3′,5′-cGMP were 6.82 and 12.82 mM, respectively. ArPDE was thermostable and displayed optimal activity at 45 °C and pH 7.5. The enzyme did not require any metal cofactors, although its activity was stimulated by 2 mM Co²⁺ and inhibited by Zn²⁺. Nucleotides, reducing agents, and sulfhydryl reagents had different inhibitory effects on the activity of ArPDE. NaF, the actual compound used to improve the industrial yield of cAMP, exhibited 62 % inhibitions at concentrations of 10 mM.     

Enzymatic Hydrolysis and Succinic Acid Fermentation from Steam-Exploded Corn Stalk at High Solid Concentration by Recombinant Escherichia coli

Steam-exploded corn stalk biomass was used as the substrate for succinic acid production via lignocellulose enzymatic hydrolysis and fermentation. Succinic acid fermentation was investigated in Escherichia coli strains overexpressing cyanobacterium Anabaena sp. 7120 ecaA gene encoding carbonic anhydrase (CA). For the washed steam-exploded corn stalk at 30 % substrate concentration, i.e., 30 % water-insoluble solids (WIS), enzymatic hydrolysis yielded 97.5 g/l glucose solution and a cellulose conversion of 73.6 %, thus a high succinic acid level up to 38.6 g/l. With the unwashed steam-exploded corn stalk, though a cellulose conversion of 71.2 % was obtained in hydrolysis at 30 % solid concentration (27.9 % WIS), its hydrolysate did not ferment at all, and the hydrolysate of 25 % solid loading containing 3.8 g/l acetic acid and 168.2 mg/l furfural exerted a strong inhibition on succinic acid production.     

Selection of Microalgae and Cyanobacteria Strains for Bicarbonate-Based Integrated Carbon Capture and Algae Production System

Using microalgae to capture CO₂ from flue gas is an ideal way to reduce CO₂ emission, but this is challenged by the high cost of carbon capture and transportation. To address this problem, a bicarbonate-based integrated carbon capture and algae production system (BICCAPS) has been proposed, in which bicarbonate is used for algae culture, and the regenerated carbonate from this process can be used to capture more CO₂. High-concentration bicarbonate is obligate for the BICCAPS. Thus, different strains of microalgae and cyanobacteria were tested in this study for their capability to grow in high-concentration NaHCO₃. The highest NaHCO₃ concentrations they are tolerant to were determined as 0.30 M for Synechocystis sp. PCC6803, 0.60 M for Cyanothece sp., 0.10 M for Chlorella sorokiniana, 0.60 M for Dunaliella salina, and 0.30 M for Dunaliella viridis and Dunaliella primolecta. In further study, biomass production from culture of D. primolecta in an Erlenmeyer flask with either 0.30 M NaHCO₃ or 2 % CO₂ bubbling was compared, and no significant difference was detected. This indicates BICCAPS can reach the same biomass productivity as regular CO₂ bubbling culture, and it is promising for future application.     

Selective n-Butanol Production by Clostridium sp. MTButOH1365 During Continuous Synthesis Gas Fermentation Due to Expression of Synthetic Thiolase, 3-Hydroxy Butyryl-CoA Dehydrogenase, Crotonase, Butyryl-CoA Dehydrogenase, Butyraldehyde Dehydrogenase, and NAD-Dependent Butanol Dehydrogenase

Acetogen Clostridum sp. MT1962 produced 287 mM acetate (p?<?0.005) and 293 mM ethanol (p?<?0.005) fermenting synthesis gas blend 60 % CO and 40 %?H₂ in single-stage continuous fermentation. This strain was metabolically engineered to the biocatalyst Clostridium sp. MTButOH1365. The engineered biocatalyst lost production of ethanol and acetate while initiated the production of 297 mM of n-butanol (p?<?0.005). The metabolic engineering comprised Cre-lox66/lox71-based elimination of phosphotransacetylase and acetaldehyde dehydrogenase along with integration to chromosome synthetic thiolase, 3-hydroxy butyryl-CoA dehydrogenase, crotonase, butyryl-CoA dehydrogenase, butyraldehyde dehydrogenase, and NAD-dependent butanol dehydrogenase. This is the first report on elimination of acetate and ethanol production genes and expression of synthetic gene cluster encoding n-butanol biosynthesis pathway in acetogen biocatalyst for selective fuel n-butanol production with no antibiotic support for the introduced genes.     

Production of Astaxanthin from Cellulosic Biomass Sugars by Mutants of the Yeast <Emphasis Type="Italic">Phaffia rhodozyma</Emphasis>

Astaxanthin is a potential high-value coproduct in an ethanol biorefinery. Three mutant strains of the astaxanthin-producing yeast Phaffia rhodozyma, which were derived from the parent strain ATCC 24202 (UCD 67-210) and designated JTM166, JTM185, and SSM19, were tested for their capability of utilizing the major sugars that can be generated from cellulosic biomass, including glucose, xylose, and arabinose, for astaxanthin production. While all three strains were capable of metabolizing these sugars, individually and in mixtures, JTM185 demonstrated the greatest sugar utilization and astaxanthin production. Astaxanthin yield by this strain (milligrams astaxanthin per gram of sugar consumed) was highest for xylose, followed by arabinose and then glucose. The kinetics of sugar utilization by strain JTM185 was studied in fermenters using mixtures of glucose, xylose, and arabinose at varied concentrations. It was found that glucose was utilized preferentially, followed by xylose, and lastly, arabinose. Astaxanthin yield was significantly affected by sugar concentrations. Highest yields were observed with sugar mixtures containing the highest concentrations of xylose and arabinose. Hydrolysates produced from sugarcane bagasse and barley straw pretreated by the soaking in aqueous ammonia method and hydrolyzed with the commercial cellulase preparation, Accellerase™ 1000, were used for astaxanthin production by the mutant strain JTM185. The organism was capable of metabolizing all of the sugars present in the hydrolysates from both biomass sources and produced similar amounts of astaxanthin from both hydrolysates, although these amounts were lower when compared to yields obtained with reagent grade sugars.     

Evaluation and Optimization of Organic Acid Pretreatment of Cotton Gin Waste for Enzymatic Hydrolysis and Bioethanol Production

This paper investigates the efficiency of the organic acids on the pretreatment of an industrially generated cotton gin waste for the removal of lignin, thereby releasing cellulose and hemicellulose as fermentable sugar components. Cotton gin waste was pretreated with various organic acids namely lactic acid, oxalic acid, citric acid, and maleic acid. Among these, maleic acid was found to be the most efficient producing maximum xylose sugar (126.05?±?0.74 g/g) at the optimum pretreatment condition of 150 °C, 500 mM, and 45 min. The pretreatment efficiency was comparable to the conventional dilute sulfuric acid pretreatment. A lignin removal of 88% was achieved by treating maleic acid pretreated biomass in a mixture of sodium sulfite and sodium chlorite. The pretreated biomass was further evaluated for the release of sugar by enzymatic hydrolysis and subsequently bioethanol production from hydrolysates. The maximum 686.13 g/g saccharification yield was achieved with maleic acid pretreated biomass which was slightly higher than the sulfuric acid (675.26 g/g) pretreated waste. The fermentation of mixed hydrolysates(41.75 g/l) produced 18.74 g/l bioethanol concentration with 2.25 g/l/h ethanol productivity and 0.48 g/g ethanol yield using sequential use of Saccharomyces cerevisiae and Pichia stipitis yeast strains. The production of bioethanol was higher than the ethanol produced using co-culture in comparison to sequential culture. Thus, it has been demonstrated that the maleic acid pretreatment and fermentation using sequential use of yeast strains are efficient for bioethanol production from cotton gin waste.     

Bioconversion of cellulose and simultaneous production of thermoactive exo- and endoglucanases by <Emphasis Type="Italic">Fusarium oxysporum</Emphasis>

Saccharification of cellulose is a promising method for production of biofuels. However, low bioconversion efficiency of cellulose to soluble sugars is a major challenge. In this study, a cellulolytic strain of Fusarium oxysporum was cultivated on pure cellulosic substrates (avicel, α-cellulose, carboxymethylcellulose and methylcellulose) and conversion efficiency into glucose was investigated. Production of exo- and endoglucanases during the bioconversion process was evaluated. Influence of pH on saccharification of cellulose and enzyme production by F. oxysporum were determined. Highest yield of glucose (1.76 μmol/ml) was obtained from F. oxysporum on methyl cellulose at 192 h under basal conditions. Liberated glucose under optimized condition of pH 6.0 at 96 h of fermentation was 2.12 μmol/ml with maximum production of exo- and endoglucanases (23.70 and 34.72 U/mg protein, respectively). The crude exo- and endoglucanases had optimum activities at pH 8.0, 70 °C and pH 7.0, 50 °C, respectively. The enzymes were stable over pH of 4.0–7.0 with relative residual activity above 60% after 1 h incubation. Exoglucanase activity was enhanced by Ca²⁺ and Cu²⁺ at 5 mM and Mg²⁺ at 10 mM. Endoglucanase activity was greatly enhanced in the presence of Mn²⁺, Ca²⁺, Mg²⁺, Cu²⁺ and Fe³⁺ at 5 and 10 mM. Activities of both enzymes were inhibited in the presence of Hg²⁺ at 5 and 10 mM. Results show that F. oxysporum possessed good cellulolytic enzyme system for efficient conversion of cellulose. Exhibited thermotolerance of exoglucanase with the striking tolerance of endoglucanase to metal ions demonstrate potentials of enzymes for biofuel industry.     

Enhancing Production of l-Serine by Increasing the glyA Gene Expression in Methylobacterium sp. MB200

Microbial fermentation using methylotrophic bacteria is one of the most promising methods for l-serine production. Here we describe the metabolic engineering of a Methylobacterium strain to increase the production of l-serine. The glyA gene, encoding serine hydroxymethyltransferase (SHMT), was isolated from the genomic DNA of Methylobacterium sp. MB200, using a DNA fragment encoding Methylobacterium extorquens AM1 SHMT as a probe, and inserted into the vector pLAFR3. The resulting construct was transformed into Methylobacterium sp. MB200 using triparental mating. The genetic-engineered strain, designated as Methylobacterium sp. MB202, was shown to produce 11.4?±?0.6 mg/ml serine in resting cell reactions from 30 mg/ml wet cells, 20 mg/ml glycine, and 70 mg/ml methanol in 2 days, representing a 4.4-fold increase from that of the wild strain. The results demonstrated the potential for improving l-serine production by manipulating the glyA in bacteria and should facilitate the production of l-serine using Methylobacterium sp. strains.     

Purification and Characterization of a Naringinase from <Emphasis Type="Italic">Cryptococcus albidus</Emphasis>

Naringinase which was extracted from the fermented broth of Cryptococcus albidus was purified about 42-folds with yield 0.7% by sulfate fractionation and chromatography on Toyopearl HW-60, Fractogel DEAE-650-s, and Sepharose 6B columns. Molecular weight of protein determined by gel filtration and SDS-PAGE was 50 kDa. Naringinase of C. albidus includes high content of the dicarbonic and hydrophobic amino acids. Enzyme contains also carbohydrate component, represented by mannose, galactose, rhamnose, ribose, arabinose, xylose, and glucose. The enzyme was optimally active at pH 5.0 and 60 °C. Naringinase was found to exhibit specificity towards p-nitrophenyl-α-L-rhamnose, p-nitrophenyl-β-D-glucose, naringin, and neohesperidin. Its K _m towards naringin was 0.77 mM and the V _max was 36 U/mg. Naringinase was inhibited by high concentrations of reaction product—L-rhamnose. Enzyme revealed stability to 20% ethanol and 500 mM glucose in the reaction mixture that makes it possible to forecast its practical use in the food industry in the production of juices and wines.