Multienzymatic Sucrose Conversion into Fructose and Gluconic Acid through Fed-Batch and Membrane-Continuous Processes

Multienzymatic conversion of sucrose into fructose and gluconic acid was studied through fed-batch and continuous (in a membrane reactor) processes. The law of substrate addition (sucrose or glucose) for the fed-batch process which led to a yield superior to 80% was the decreasing linear type, whose feeding rate (?; L/h) was calculated through the equation: ? = ?_o ? k.t, where ?_o (initial feeding rate, L/h), k (linear addition constant, L/h ²), and t (reaction time, h). In the continuous process, the yield of conversion of sucrose (Y) was superior to 70% under the following conditions: dilution rate?=?0.33 h^?1, total duration of 15 h, pH 5.0, 37 °C and initial sucrose concentration of 64 g/L (Y?=?92%), 100 g/L (Y?=?83%), or 150 g/L (Y?=?76%).     

Effect of Initial Cell Concentration on Ethanol Production by Flocculent Saccharomyces cerevisiae with Xylose-Fermenting Ability

Different initial cell concentrations of a recombinant flocculent Saccharomyces cerevisiae MA-R4 were evaluated for their effects on xylose fermentation and glucose–xylose cofermentation. A high initial cell concentration greatly increased both the substrate utilization and ethanol production rates. During xylose fermentation, the highest rates of xylose consumption (2.58 g/L h) and ethanol production (0.83 g/L h) were obtained at an initial cell concentration of 13.1 g/L. During cofermentation, the highest rates of glucose consumption (14.4 g/L h), xylose consumption (2.79 g/L h), and ethanol production (6.68 g/L h) were obtained at an initial cell concentration of 12.7 g/L. However, a high initial cell density had no positive effect on the maximum ethanol concentration and ethanol yield mainly due to the increased amount of by-products including xylitol. The ethanol yield remained almost constant (0.34 g/g) throughout xylose fermentation (initial cell concentration range, 1.81–13.1 g/L), while it was slightly lower at high initial cell concentrations (9.87 and 12.7 g/L) during cofermentation. The determination of the appropriate initial cell concentration is necessary for the improvement of substrate utilization and ethanol yield.     

<Emphasis Type="Italic">Hypericum japonicum:</Emphasis> a Double-Headed Sword to Combat Vector Control and Cancer

Weissella cibaria RBA12 produced a maximum of 9 mg/ml dextran (with 90% efficiency) using shake flask culture under the optimized concentration of medium components viz. 2% (w/v) of each sucrose, yeast extract, and K₂HPO₄ after incubation at optimized conditions of 20 °C and 180 rpm for 24 h. The optimized medium and conditions were used for scale-up of dextran production from Weissella cibaria RBA12 in 2.5-l working volume under batch fermentation in a bioreactor that yielded a maximum of 9.3 mg/ml dextran (with 93% efficiency) at 14 h. After 14 h, dextran produced was utilized by the bacterium till 18 h in its stationary phase under sucrose depleted conditions. Dextran utilization was further studied by fed-batch fermentation using sucrose feed. Dextran on production under fed-batch fermentation in bioreactor gave 35.8 mg/ml after 32 h. In fed-batch mode, there was no decrease in dextran concentration as observed in the batch mode. This showed that the utilization of dextran by Weissella cibaria RBA12 is initiated when there is sucrose depletion and therefore the presence of sucrose can possibly overcome the dextran hydrolysis. This is the first report of utilization of dextran, post-sucrose depletion by Weissella sp. studied in bioreactor.     

High-Cell-Density cultivation of pseudomonas putida IPT 046 and medium-chain-length polyhydroxyalkanoate production from sugarcane carbohydrates

We studied high-density cultures of Pseudomonas putida IPT 046 for the production of medium-chain-length polyhydroxyalkanoates (PHA_MCL) using an equimolar mixture of glucose and fructose as carbon sources. Kinetics studies of P. putida growth resulted in a maximum specific growth rate of 0.65h⁻¹. Limitation and inhibition owing to NH₄ ⁺ ions were observed, respectively, at 400 and 3500 mg of NH₄ ⁺/L. The minimum concentration of dissolved oxygen in the broth must be 15% of saturation. Fed-batch strategies for high-cell-density cultivation were proposed. Pulse feed followed by constant feed produced a cell concentration of 32 g/L in 18 h of fermentation and low PHA_MCL content. Constant feed produced a cell concentration of 35 g/L, obtained in 27 h of fermentation, with up to 15% PHA_MCL. Exponential feed produced a cell concentration of 30 g/L in 20 h of fermentation and low PHA_MCL content. Using the last strategy, 21% PHA_MCL was produced during a period of 34 h of fed-batch operation, with a final cell concentration of 40 g/L and NH₄ ⁺ limitation. Using phosphate limitation, 50 g/L cell concentration, 63% PHA_MCL and a productivity of 0.8 g/(L·h) were obtained in 42 h of fed-batch operation. The PHA_MCL yield factors from consumed carbohydrate for N-limited and P-limited experiments were, respectively, 0.15 and 0.19 g/g.     

Repeated Batch Cell-Immobilized System for the Biotechnological Production of Xylitol as a Renewable Green Sweetener

The present paper studies the biotechnological production of xylitol using sugarcane bagasse hydrolysate in a repeated batch fermentation system with immobilized cells of Candida guilliermondii FTI20037. Immobilized cell system is considered as an attractive alternative to reuse the well-grown and adapted yeast cells in a new fresh fermentation media, without the need of the inoculum stage. In this work, seven repeated batches were performed in a fluidized bed bioreactor using immobilized cells in calcium alginate beads. According to the obtained results it was observed that the immobilized cells of C. guilliermondii can be reused for six successive batches maintaining an average xylitol yield (Y _p/s) of 0.7 g/L and a volumetric productivity (Q _p) of 0.42 g/L?h at the end of 432 h of fermentation. On the other hand, in the seventh batch (504 h), a decrease of 44 % in the final concentration of xylitol was observed. This reduction can be explained by the possible diffusion and accumulation of insoluble substances, found in the hemicellulosic hydrolysate, in the interior of the immobilization support resulting in substrate mass transfer limitations.     

A Statistical Approach for Optimization of Polyhydroxybutyrate Production by Bacillus sphaericus NCIM 5149 under Submerged Fermentation Using Central Composite Design

The aim of this work was to statistically optimize the cultural and nutritional parameters for the production of polyhydroxybutyrate (PHB) under submerged fermentation using jackfruit seed hydrolysate as the sole carbon source. On the basis of results obtained from “one variable at a time” experiment, inoculum age, jackfruit seed hydrolysate concentration, and pH were selected for response surface methodology studies. A central composite design (CCD) was employed to get the optimum level of these three factors to maximize the PHB production. The CCD results predicted that jackfruit seed hydrolysates containing 2.5% reducing sugar, inoculum age of 18 h, and initial medium pH 6 could enhance the production of PHB to reach 49% of the biomass (biomass 4.5 g/l and PHB concentration 2.2 g/l). Analysis of variance exhibited a high coefficient of determination (R ²) value of 0.910 and 0.928 for biomass and PHB concentration, respectively, and ensured that the quadratic model with the experimental data was a satisfactory one. This is the first report on PHB production by Bacillus sphaericus using statistical experimental design and RSM in submerged fermentation with jackfruit seed hydrolysate as the sole source of carbon.     

Microbial Fed-batch Production of 1,3-Propanediol Using Raw Glycerol with Suspended and Immobilized Klebsiella pneumoniae

The production of 1,3-propanediol (1,3-PD) was investigated with Klebsiella pneumoniae DSM 4799 using raw glycerol without purification obtained from a biodiesel production process. Fed-batch cultures with suspended cells revealed that 1,3-PD production was more effective when utilizing raw glycerol than pure glycerol (productivity after 47 h of fermentation, 0.84 g?L^?1?h^?1 versus 1.51 g?L^?1?h^?1 with pure and raw glycerol, respectively). In addition, more than 80 g/L of 1,3-PD was produced using raw glycerol; this is the highest 1,3-PD concentration reported thus far for K. pneumoniae using raw glycerol. Repeated fed-batch fermentation with cell immobilization in a fixed-bed reactor was performed to enhance 1,3-PD production. Production of 1,3-PD increased with the cycle number (1.06 g?L^?1?h^?1 versus 1.61 g?L^?1?h^?1 at the first and fourth cycle, respectively) due to successful cell immobilization. During 46 cycles of fed-batch fermentation taking place over 1,460 h, a stable and reproducible 1,3-PD production performance was observed with both pure and raw glycerol. Based on our results, repeated fed batch with immobilized cells is an efficient fermentor configuration, and raw glycerol can be utilized to produce 1,3-PD without inhibitory effects caused by accumulated impurities.     

Selection of a Thermotolerant Kluyveromyces marxianus Strain with Potential Application for Cellulosic Ethanol Production by Simultaneous Saccharification and Fermentation

The development of technologies for cellulosic ethanol production by simultaneous saccharification and fermentation (SSF) depends on the use of microorganisms with high fermentative rates and thermotolerance. In this study, the ability of five Kluyveromyces marxianus strains to produce ethanol from glucose at 45 °C was investigated. The highest fermentative parameters were observed with K. marxianus NRRL Y-6860, which was then further studied. An initial evaluation of the oxygen supply on ethanol production by the selected yeast and a comparison of SSF process from acid pretreated rice straw between K. marxianus NRRL Y-6860 and Saccharomyces cerevisiae at 30 and 45 °C were carried out. Under the lowest evaluated conditions of aeration and agitation, K. marxianus NRRL Y-6860 produced 21.5 g/L ethanol from 51.3 g/L glucose corresponding to Y_P/S of 0.44 g/g and Q_P of 3.63 g/L h. In the SSF experiments, K. marxianus NRRL Y-6860 was more efficient than S. cerevisiae at both evaluated temperatures (30 and 45 °C), attained at the highest temperature an ethanol yield of 0.24 g/g and productivity of 1.44 g/L h.     

Fumaric Acid Production from Alkali-Pretreated Corncob by Fed-Batch Simultaneous Saccharification and Fermentation Combined with Separated Hydrolysis and Fermentation at High Solids Loading

Production of fumaric acid from alkali-pretreated corncob (APC) at high solids loading was investigated using a combination of separated hydrolysis and fermentation (SHF) and fed-batch simultaneous saccharification and fermentation (SSF) by Rhizopus oryzae. Four different fermentation modes were tested to maximize fumaric acid concentration at high solids loading. The highest concentration of 41.32 g/L fumaric acid was obtained from 20 % (w/v) APC at 38 °C in the combined SHF and fed-batch SSF process, compared with 19.13 g/L fumaric acid in batch SSF alone. The results indicated that a combination of SHF and fed-batch SSF significantly improved production of fumaric acid from lignocellulose by R. oryzae than that achieved with batch SSF at high solids loading.     

Optimized Fed-Batch Fermentation of Scheffersomyces stipitis for Efficient Production of Ethanol from Hexoses and Pentoses

Scheffersomyces stipitis was cultivated in an optimized, controlled fed-batch fermentation for production of ethanol from glucose–xylose mixture. Effect of feed medium composition was investigated on sugar utilization and ethanol production. Studying influence of specific cell growth rate on ethanol fermentation performance showed the carbon flow towards ethanol synthesis decreased with increasing cell growth rate. The optimum specific growth rate to achieve efficient ethanol production performance from a glucose-xylose mixture existed at 0.1 h^?1. With these optimized feed medium and cell growth rate, a kinetic model has been utilized to avoid overflow metabolism as well as to ensure a balanced feeding of nutrient substrate in fed-batch system. Fed-batch culture with feeding profile designed based on the model resulted in high titer, yield, and productivity of ethanol compared with batch cultures. The maximal ethanol concentration was 40.7 g/L. The yield and productivity of ethanol production in the optimized fed-batch culture was 1.3 and 2 times higher than those in batch culture. Thus, higher efficiency ethanol production was achieved in this study through fed-batch process optimization. This strategy may contribute to an improvement of ethanol fermentation from lignocellulosic biomass by S. stipitis on the industrial scale.     

Influence of carbon and nitrogen sources and temperature on hyperproduction of a thermotolerant β-glucosidase from synthetic medium by Kluyveromyces marxianus

The effect of carbon source and its concentration, inoculum size, yeast extract concentration, nitrogen source, pH of the fermentation medium, and fermentation temperature on β-glucosidase production by Kluyveromyces marxianus in shake-flask culture was investigated. These were the independent variables that directly regulated the specific growth and β-glucosidase production rate. The highest product yield, specific product yield, and productivity of β-glucosidase occurred in the medium (pH 5.5) inoculated with 10% (v/v) inoculum of the culture. Cellobiose (20 g/L) significantly improved β-glucosidase production measured as product yield (Y _P/S ) and volumetric productivity (Q _P ) followed by sucrose, lactose, and xylose. The highest levels of productivity (144 IU/[L·h]) of β-glucosidase occurred on cellobiose in the presence of CSL at 35°C and are significantly higher than the values reported by other researchers on almost all other organisms. The thermodynamics and kinetics of β-glucosidase production and its deactivation are also reported. The enzyme was substantially stable at 60°C and may find application in some industrial processes.     

Effect of Nutrients on Fermentation of Pretreated Wheat Straw at very High Dry Matter Content by Saccharomyces cerevisiae

Wheat straw hydrolysate produced by enzymatic hydrolysis of hydrothermal pretreated wheat straw at a very high solids concentration of 30% dry matter (w/w) was used for testing the effect of nutrients on their ability to improve fermentation performance of Saccharomyces cerevisiae. The nutrients tested were MgSO₄ and nitrogen sources; (NH₄)₂SO₄, urea, yeast extract, peptone and corn steep liquor. The fermentation was tested in a separate hydrolysis and fermentation process using a low amount of inoculum (0.33 g kg^?1) and a non-adapted baker’s yeast strain. A factorial screening design revealed that yeast extract, peptone, corn steep liquor and MgSO₄ were the most significant factors in obtaining a high fermentation rate, high ethanol yield and low glycerol formation. The highest volumetric ethanol productivity was 1.16 g kg^?1 h^?1 and with an ethanol yield close to maximum theoretical. The use of urea or (NH₄)₂SO₄ separately, together or in combination with MgSO₄ or vitamins did not improve fermentation rate and resulted in increased glycerol formation compared to the use of yeast extract. Yeast extract was the single best component in improving fermentation performance and a concentration of 3.5 g kg^?1 resulted in high ethanol yield and a volumetric productivity of 0.6 g kg^?1 h^?1.     

Evaluation of inoculum of Candida guilliermondii grown in presence of glucose on xylose reductase and xylitol dehydrogenase activities and xylitol production during batch fermentation of sugarcane bagasse hydrolysate

The effect of glucose on xylose-xylitol metabolism in fermentation medium consisting of sugarcane bagasse hydrolysate was evaluated by employing an inoculum of Candida guilliermondii grown in synthetic media containing, as carbon sources, glucose (30 g/L), xylose (30 g/L), or a mixture of glucose (2 g/L) and xylose (30 g/L). The inoculum medium containing glucose promoted a 2.5-fold increase in xylose reductase activity (0.582 IU/mg_prot) and a 2-fold increase in xylitol dehydrogenase activity (0.203 IU/mg_prot) when compared with an inoculum-grown medium containing only xylose. The improvement in enzyme activities resulted in higher values of xylitol yield (0.56 g/g) and productivity (0.46 g/[L·h]) after 48 h of fermentation.     

Enhancement of pullulan production by aureobasidium pullulans in batch culture using olive oil and sucrose as carbon sources

The production of pigment-free pullulan byAureobasidium pullulans, using olive oil and sucrose as carbon (C) sources, in shake flasks, was investigated. Optimum medium composition for pullulan elaboration was 80 g/L sucrose, 25 mL/L olive oil, 5 mL/L Tween-80, 10 g/L glutamic acid, and an initial pH of 5.5. Maximum pullulan concentration (51.5 g/L), productivity (8.6 g/L·d), and yield (80.3%) were achieved under these conditions after 120 h of fermentation. The principal advantage of using olive oil and sucrose simultaneously as C sources was the elimination of the inhibitory effect of high sucrose concentrations (> 60 g/L) on pullulan production by the microorganism. Structural characterization by¹³C-NMR, monosaccharide, and methylation analyses, and pullulanase digestion, combined with size-exclusion chromatography, confirmed the identity of pullulan and the homogeneity of the released polysaccharide in the fermentation broths. There were no significant differences in structure between pullulan samples isolated from either olive oil-supplemented media or olive oil-free media. The molecular size of pullulan from the combined olive oil-sucrose fermentation was slightly lower (1.1 X 10⁶) than that of conventional fermentation with sucrose as a single C source (1.4 X 10⁶). Lowering the initial pH of the medium resulted in increased molecular size for the released polymer, but a lower pullulan yield.     

Ethanol Production from Sugarcane Bagasse Hydrolysate Using Pichia stipitis

The objective of this study was to evaluate the ethanol production from the sugars contained in the sugarcane bagasse hemicellulosic hydrolysate with the yeast Pichia stipitis DSM 3651. The fermentations were carried out in 250-mL Erlenmeyers with 100 mL of medium incubated at 200 rpm and 30 °C for 120 h. The medium was composed by raw (non-detoxified) hydrolysate or by hydrolysates detoxified by pH alteration followed by active charcoal adsorption or by adsorption into ion-exchange resins, all of them supplemented with yeast extract (3 g/L), malt extract (3 g/L), and peptone (5 g/L). The initial concentration of cells was 3 g/L. According to the results, the detoxification procedures removed inhibitory compounds from the hemicellulosic hydrolysate and, thus, improved the bioconversion of the sugars into ethanol. The fermentation using the non-detoxified hydrolysate led to 4.9 g/L ethanol in 120 h, with a yield of 0.20 g/g and a productivity of 0.04 g L^?1 h^?1. The detoxification by pH alteration and active charcoal adsorption led to 6.1 g/L ethanol in 48 h, with a yield of 0.30 g/g and a productivity of 0.13 g L^?1 h^?1. The detoxification by adsorption into ion-exchange resins, in turn, provided 7.5 g/L ethanol in 48 h, with a yield of 0.30 g/g and a productivity of 0.16 g L^?1 h^?1.     

Bioethanol Production from Soybean Residue via Separate Hydrolysis and Fermentation

Bioethanol was produced using polysaccharide from soybean residue as biomass by separate hydrolysis and fermentation (SHF). This study focused on pretreatment, enzyme saccharification, and fermentation. Pretreatment to obtain monosaccharide was carried out with 20% (w/v) soybean residue slurry and 270 mmol/L H₂SO₄ at 121 °C for 60 min. More monosaccharide was obtained from enzymatic hydrolysis with a 16 U/mL mixture of commercial enzymes C-Tec 2 and Viscozyme L at 45 °C for 48 h. Ethanol fermentation with 20% (w/v) soybean residue hydrolysate was performed using wild-type and Saccharomyces cerevisiae KCCM 1129 adapted to high concentrations of galactose, using a flask and 5-L fermenter. When the wild type of S. cerevisiae was used, an ethanol production of 20.8 g/L with an ethanol yield of 0.31 g/g consumed glucose was obtained. Ethanol productions of 33.9 and 31.6 g/L with ethanol yield of 0.49 g/g consumed glucose and 0.47 g/g consumed glucose were obtained in a flask and a 5-L fermenter, respectively, using S. cerevisiae adapted to a high concentration of galactose. Therefore, adapted S. cerevisiae to galactose could enhance the overall ethanol fermentation yields compared to the wild-type one.     

Hybrid SSF/SHF Processing of SO<Subscript>2</Subscript> Pretreated Wheat Straw—Tuning Co-fermentation by Yeast Inoculum Size and Hydrolysis Time

Wheat straw is one of the main agricultural residues of interest for bioethanol production. This work examines conversion of steam-pretreated wheat straw (using SO₂ as a catalyst) in a hybrid process consisting of a short enzymatic prehydrolysis step and a subsequent simultaneous saccharification and fermentation (SSF) step with a xylose-fermenting strain of Saccharomyces cerevisiae. A successful process requires a balanced design of reaction time and temperature in the prehydrolysis step and yeast inoculum size and temperature in the SSF step. The pretreated material obtained after steam pretreatment at 210 °C for 5 min using 2.5 % SO₂ (based on moisture content) showed a very good enzymatic digestibility at 45 °C but clearly lower at 30 °C. Furthermore, the pretreatment liquid was found to be rather inhibitory to the yeast, partly due to a furfural content of more than 3 g/L. The effect of varying the yeast inoculum size in this medium was assessed, and at a yeast inoculum size of 4 g/L, a complete conversion of glucose and a 90 % conversion of xylose were obtained within 50 h. An ethanol yield (based on the glucan and xylan in the pretreated material) of 0.39 g/g was achieved for a process with this yeast inoculum size in a hybrid process (10 % water-insoluble solid (WIS)) with 4 h prehydrolysis time and a total process time of 96 h. The obtained xylose conversion was 95 %. A longer prehydrolysis time or a lower yeast inoculum size resulted in incomplete xylose conversion.     

Enzymatic Hydrolysis and Fermentation of Pretreated Cashew Apple Bagasse with Alkali and Diluted Sulfuric Acid for Bioethanol Production

The aim of this work was to optimize the enzymatic hydrolysis of the cellulose fraction of cashew apple bagasse (CAB) after diluted acid (CAB-H) and alkali pretreatment (CAB-OH), and to evaluate its fermentation to ethanol using Saccharomyces cerevisiae. Glucose conversion of 82?±?2 mg/g CAB-H and 730?±?20 mg/g CAB-OH was obtained when 2% (w/v) of solid and 30 FPU/g bagasse was used during hydrolysis at 45 °C, 2-fold higher than when using 15 FPU/g bagasse, 44?±?2 mg/g CAB-H, and 450?±?50 mg/g CAB-OH, respectively. Ethanol concentration and productivity, achieved after 6 h of fermentation, were 20.0?±?0.2 g L^?1 and 3.33 g L^?1 h^?1, respectively, when using CAB-OH hydrolyzate (initial glucose concentration of 52.4 g L^?1). For CAB-H hydrolyzate (initial glucose concentration of 17.4 g L^?1), ethanol concentration and productivity were 8.2?±?0.1 g L^?1 and 2.7 g L^?1 h^?1 in 3 h, respectively. Hydrolyzates fermentation resulted in an ethanol yield of 0.38 and 0.47 g/g glucose with pretreated CAB-OH and CAB-H, respectively. Ethanol concentration and productivity, obtained using CAB-OH hydrolyzate, were close to the values obtained in the conventional ethanol fermentation of cashew apple juice or sugar cane juice.     

Application of factorial design to the study of xylitol production from eucalyptus hemicellulosic hydrolysate

This study deals with the bioconversion of xylose into xylitol by Candida guilliermondii FTI 20037 using eucalyptus hemicellulosic hydrolysate obtained by acid hydrolysis. The influence of various parameters (ammonium sulfate, rice bran, pH, and xylose concentration) on the production of xylitol was evaluated. The experiments were based on multivariate statistical concepts, with the application of factorial design techniques to identify the most important variables in the process. The levels of these variables were quantified by the response surface methodology, which permitted the establishment of a significant mathematical model with a coefficient determination of R ²=0.92. The best results (xylitol=10.0 g/L, yield factor=0.2 g/g, and productivity=0.1 g/[L·h]) were attained with hydrolysate containing ammonium sulfate (1.1 g/L), rice bran (5.0 g/L), and xylose (initial concentration of 60.0 g/L), after 72 h of fermentation. The pH of fermentation was adjusted to 8.0 and the inoculum level utilized was 3 g/L.     

Efficient Production of Ethanol from Empty Palm Fruit Bunch Fibers by Fed-Batch Simultaneous Saccharification and Fermentation Using Saccharomyces cerevisiae

The concentration of ethanol produced from lignocellulosic biomass should be at least 40 g l^?1 [about 5 % (v/v)] to minimize the cost of distillation process. In this study, the conditions for the simultaneous saccharification and fermentation (SSF) at fed-batch mode for the production of ethanol from alkali-pretreated empty palm fruit bunch fibers (EFB) were investigated. Optimal conditions for the production of ethanol were identified as temperature, 30 °C; enzyme loading, 15 filter paper unit g^?1 biomass; and yeast (Saccharomyces cerevisiae) loading, 5 g l^?1 of dry cell weight. Under these conditions, an economical ethanol concentration was achieved within 17 h, which further increased up to 62.5 g l^?1 after 95 h with 70.6 % of the theoretical yield. To our knowledge, this is the first report to evaluate the economic ethanol production from alkali-pretreated EFB in fed-batch SSF using S. cerevisiae.