Application of Supermacroporous Monolithic Hydrophobic Cryogel in Capturing of Albumin

Supermacroporous poly{2-hydroxyethyl methacrylate-co-[N,N-bis(2,6-diisopropylphenyl)-perylene-3,4,9,10-tetracarboxylic diimide]} [poly(HEMA-co-DIPPER)] monolithic cryogel column was prepared by radical cryocopolymerization of HEMA with DIPPER as functional comonomer and N,N′-methylene-bisacrylamide (MBAAm) as crosslinker directly in a plastic syringe for adsorption of albumin. The monolithic cryogel contained a continuous polymeric matrix having interconnected pores of 10–50 μm size. Poly(HEMA-co-DIPPER) cryogel was characterized by swelling studies, FTIR, scanning electron microscopy, and elemental analysis. The equilibrium swelling degree of the poly(HEMA-co-DIPPER) cryogel was 14.7 g H₂O/g dry cryogel. Poly(HEMA-co-DIPPER) cryogel was used in the adsorption/desorption of albumin from aqueous solutions. The nonspecific adsorption of albumin onto plain poly(HEMA) cryogel was very low (3.36 g/g polymer). The maximum amount of albumin adsorption from aqueous solution in acetate buffer was 40.9 mg/g polymer at pH 5.0. It was observed that albumin could be repeatedly adsorbed and desorbed with the poly(HEMA-co-DIPPER) cryogel without significant loss of adsorption capacity.     

A Crosslinked Carboxylic Acid Containing Cation Exchange Monolithic Cryogel for Human Serum Albumin Separation

For this work, we synthesized poly(N-isopropylacrylamide-acrylamide)-acrylic acid (poly(NIPAM-Am)-AAc) monolithic cryogel for a human serum albumin separation (HSA) from a protein mixture (human serum immunoglobulin, human serum albumin and lysozyme) and performed HSA adsorption studies using the cryogel to do continuous system experiments in a syringe column connected by a peristaltic pump. Poly(NIPAM-Am)-AAc with a pore size of 10–100 μm was produced by free radical polymerization that proceeded in an aqueous solution of monomers frozen inside a syringe column. The monolithic poly(NIPAM-Am)-AAc cryogel was characterized by performing swelling studies, FTIR and SEM that showed a swelling ratio of 6.2 g H₂O/g dry cryogel. The maximum HSA adsorption by the cryogel was 42.5 mg/g polymer at pH 4.0 in a 50 mM acetate buffer. We also studied the effect of two different temperatures (25 and 40°C). The higher temperature increased the adsorption capacity of the cryogel. HSA molecules could be reversibly adsorbed and desorbed five times with the same poly(NIPAM-Am)-AAc cryogel without a noticeable loss of their HSA adsorption capacity. The synthesized cryogel was used to separate albumin from the protein mixture. Adsorbed albumin was eluted by changing the pH of the buffer (pH 7.0 and 25°C). Poly(NIPAM-Am)-AAc monolithic cryogel behaved as a cation exchange column because of its functional carboxylic group.     

A New Metal-Chelated Cryogel for Reversible Immobilization of Urease

Poly(2-hydroxyethyl methacrylate-co-glycidyl methacrylate) [poly(HEMA-GMA)] cryogel was synthesized by cryopolymerization technique at frozen temperature. Iminodiacetic acid (IDA) was then attached covalently to the cryogel as a chelating agent. Then, poly(HEMA-GMA)-IDA cryogel was chelated with Ni(II) ions and this novel metal affinity support was used for adsorption of urease from its aqueous solution. Urease adsorption experiments were carried out in a continuous system by using a peristaltic pump. Maximum urease adsorption onto poly(HEMA-GMA)-IDA-Ni(II) cryogel was found to be 11.30 mg/g cryogel at pH 5.0 acetate buffer and in 25 °C medium temperature. Urease adsorption capacity decreased with increasing ionic strength and increasing chromatographic flow rate. Adsorption kinetics of urease onto poly(HEMA-GMA)-IDA-Ni(II) cryogel was also investigated and it was found that Langmuir adsorption model is applicable for this adsorption study. This novel immobilized metal affinity chromatography support was used 10 times without any decrease at their adsorption capacity. It was also observed that urease enzyme was repeatedly adsorbed and desorbed without significant lost in enzymatic activity.     

Purification of Papain Using Reactive Green 5 Attached Supermacroporous Monolithic Cryogel

Supermacroporous poly(2-hydroxyethyl methacrylate) [poly(HEMA)] monolithic cryogel was prepared by radical cryocopolymerization of HEMA with N,N??-methylene bisacrylamide as crosslinker. Reactive Green 5 dye was immobilized to the cryogel with nucleophilic substitution reaction, and this dye attached cryogel column was used for affinity purification of papain from Carica papaya latex. Reactive Green 5-immobilized poly(HEMA) cryogel was characterized by swelling studies, Fourier transform infrared spectroscopy, scanning electron microscopy, and energy dispersive X-ray analysis. Maximum papain adsorption capacity was found to be 68.5?mg/g polymer while nonspecific papain adsorption onto plain cryogel was negligible (3.07?mg/g polymer). Papain from C. papaya was purified 42-fold in single step with dye attached cryogel, and purity of papain was shown by silver-stained sodium dodecyl sulfate?Cpolyacrylamide gel electrophoresis.     

Immobilization of Inulinase on Concanavalin A-Attached Super Macroporous Cryogel for Production of High-Fructose Syrup

In this study, concanavalin A (Con A)-attached poly(ethylene glycol dimethacrylate) [poly(EGDMA)] cryogels were used for immobilization of Aspergillus niger inulinase. For this purposes, the monolithic cryogel column was prepared by radical cryocopolymerization of EGDMA as a monomer and N,N′-methylene bisacrylamide as a crosslinker. Then, Con A was attached by covalent binding onto amino-activated poly(EGDMA) cryogel via glutaraldehyde activation. Characterization of cryogels was performed by FTIR, EDX, and SEM studies. Poly(EGDMA) cryogels were highly porous and pore size was found to be approximately 50–100 μm. Con A-attached poly(EGDMA) cryogels was used in the adsorption of inulinase from aqueous solutions. Adsorption of inulinase on the Con A-attached poly(EGDMA) cryogel was performed in continuous system and the effects of pH, inulinase concentration, and flow rate on adsorption were investigated. The maximum amount of inulinase adsorption was calculated to be 27.85 mg/g cryogel at 1.0 mg/mL inulinase concentration and in acetate buffer at pH 4.0. Immobilized inulinase was effectively used in continuous preparation of high-fructose syrup. Inulin was converted to fructose in a continuous system and released fructose concentration was found to be 0.23 mg/mL at the end of 5 min of hydrolysis. High-fructose content of the syrup was demonstrated by thin layer chromatography.     

Histidine-epoxy-activated sepharose beads embedded poly (2-hydroxyethyl methacrylate) cryogels for pseudobiospecific adsorption of human immunoglobulin G

The use of highly purified immunoglobulin became among the most powerful adopted strategies in therapeutic trials nowadays. Their role as immunomodulatory and anti-inflammatory agents has widened their scope of use. A novel continuous supermacroporous monolithic cryogels embedded with histidine-epoxy-activated-sepharose beads were synthetized as a new monolithic adsorbents for the separation of immunoglobulin G from human serum. The histidine-epoxy-activated-sepharose beads were embedded into the 2-hydroxyethyl methacrylate (HEMA) cryogels present in frozen aqueous solution inside a plastic syringe. The microstructure morphology of the cryogels was characterized by swelling measurement and scanning electron microscopy. The adsorption of human IgG on the histidine-epoxy-activated-sepharose beads pHEMA cryogels appeared to follow the Langmuir–Freundlich adsorption isotherm model. The maximum IgG adsorption was observed at 4°C and pH 7.4 and was found to be 26.95 mg/g of cryogel which is close to that obtained experimentally (24.49 mg/g). The cryogels were used for several adsorption-desorption cycles without any negligible decrease in their adsorption capacity.     

Hydrophobic cryogels for DNA adsorption: Effect of embedding of monosize microbeads into cryogel network on their adsorptive performances

As alternative hydrophobic adsorbent for DNA adsorption, supermacroporous cryogel disks were synthesized via free radical polymerization. In this study, we have prepared two kinds of cryogel disks: (i) poly(2‐hydroxyethyl methacrylate‐N‐methacryloyl‐l ‐tryptophan) [p(HEMA‐MATrp)] cryogel containing specific hydrophobic ligand MATrp; and (ii) monosize p(HEMA‐MATrp) particles synthesized via suspension polymerization embedded into p(HEMA) cryogel structure to obtain p(HEMA‐MATrp)/p(HEMA) composite cryogel disks. These cryogel disks containing hydrophobic functional group were characterized via swelling studies, Fourier transform infrared spectroscopy, elemental analysis, surface area measurements and scanning electron microscopy. DNA adsorption onto both p(HEMA‐MATrp) cryogel and p(HEMA‐MATrp)/p(HEMA) composite cryogels was investigated. Maximum adsorption of DNA on p(HEMA‐MATrp) cryogel was found to be 15 mg/g polymer. Otherwise, p(HEMA‐MATrp)/p(HEMA) composite cryogels significantly increased the DNA adsorption capacity to 38 mg/g polymer. Composite cryogels could be used repeatedly without significant loss on adsorption capacity after 10 repetitive adsorption–desorption cycles. Copyright © 2013 John Wiley & Sons, Ltd.     

Hydrazide-functionalized hollow porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate) spheres for immobilization of enzyme

Hollow porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate)(HEMA-co-EDMA) spheres were prepared by emulsifier-free emulsion polymerization, swelling, seed emulsion polymerization and extraction. Then the spheres activated with 2,4,6-trichloro-1,3,5-triazine were functioned with adipohydrazide (AH). After periodate oxidation of its carbohydrate moieties, horseradish peroxidase was immobilized on the hydrazide-functionalized hollow porous poly(HEMA-co-EDMA) spheres. The amount of immobilized enzyme was up to 43.4 μg of enzyme/g of support. Moreover, the immobilized horseradish peroxidase exhibited high activity and good stability.     

Poly-L-Histidine Attached Poly(glycidyl methacrylate) Cryogels for Heavy Metal Removal

Poly-L-histidine immobilized poly(glycidyl methacrylate) (PGMA) cryogel discs were used for the removal of heavy metal ions [Pb(II), Cd(II), Zn(II) and Cu(II)] from aqueous solutions. In the first step, PGMA cryogel discs were synthesized using glycidyl methacrylate (GMA) as a basic monomer and methylene bisacrylamide (MBAAm) as a cross linker in order to introduce active epoxy groups through the polymeric backbone. Then, the metal chelating groups are incorporated to cryogel discs by immobilizing poly-L-histidine (mol wt ≥ 5000) having poly-imidazole ring. The swelling test, fourier transform infrared spectroscopy and scanning electron microscopy were performed to characterize both the PGMA and poly-L-histidine immobilized PGMA [P-His@PGMA] cryogel discs. The effects of the metal ion concentration and pH on the adsorption capacity were studied. These parameters were varied between 3.0–6.0 and 10–800 mg/L for pH and metal ion concentration, respectively. The maximum adsorption capacity of heavy metal ions of P-His@PGMA cryogel discs were 6.9 mg/g for Pb(II), 6.4 mg/g for Cd(II), 5.6 mg/g for Cu(II) and 4.3 mg/g for > Zn(II). Desorption of heavy metal ions was studied with 0.1 M HNO₃ solution. It was observed that cryogel discs could be recurrently used without important loss in the adsorption amount after five repetitive adsorption/desorption processes. Adsorption isotherms were fitted to Langmuir model and adsorption kinetics were suited to pseudo-second order model. Thermodynamic parameters (i.e. ΔH° ΔS°, ΔG°) were also calculated at different temperatures.     

Preparation of thermally sensitive poly[N-isopropylacrylamide-co-(maleic acid)] hydrogel membrane by electrospinning using a green solvent

Poly[N-isopropylacrylamide-co-(maleic acid)], poly(NIPA-co-MA), was synthesized by radical polymerization in an aqueous solution composing of 35% mol N-isopropylacrylamide/maleic acid. Poly(NIPA-co-MA) hydrogel nanofibrous membrane was fabricated by electrospinning using ethanol as solvent. The electrospun nanofibers were cross-linked using diethylene glycol as cross-linker, followed by a heat-induced esterification reaction at 145°C. The average diameter of electrospun fibers was 117 ± 33 nm. The hydrogel membrane exhibited a temperature sensitive property. Its minimum and maximum water absorption ratios were 4 ± 0 g g^?1 at 50°C and 17 ± 4 g g^?1 at 34°C, respectively. An equilibrium swelling state of the electrospun membrane was reached within 5 min.     

Creatinine imprinted poly(hydroxyethyl methacrylate) based cryogel cartridges

Creatinine imprinted cryogel (MIP) cartridge was prepared with functional monomer N-methacryloyl-(L)-histidinemethylester (MAH) under frozen conditions. Creatinine adsorption studies and selectivity of MIP cryogel were evaluated in aqueous solution and artificial urine sample. Maximum adsorbed amount of creatinine was calculated as 6.83 mg/g polymer for MIP cryogel. Langmuir and Freundlich adsorption isotherm models were used to investigate the adsorption behaviour of creatinine. In the artificial urine sample; recovery amounts of creatinine were found 34.7–46.2%. Creatinine imprinted cryogel (MIP) cartridge recognized creatinine, 4.58 and 4.37 times greater competitive molecules. MIP cryogel catridge was repeatedly used many times for adsorption desorption cycles.     

A novel adsorbent for protein chromatography: supermacroporous monolithic cryogel embedded with Cu2+-attached sporopollenin particles

The aim of this study is to prepare supermacroporous cryogels embedded with Cu(2+)-attached sporopollenin particles (Cu(2+)-ASP) having large surface area for high protein adsorption capacity. Supermacroporous poly(2-hydroxyethyl methacrylate) (PHEMA)-based monolithic cryogel column embedded with Cu(2+)-ASP was prepared by radical cryo-copolymerization of 2-hydroxyethyl methacrylate (HEMA) with N,N'-methylene-bis-acrylamide (MBAAm) as cross-linker directly in a plastic syringe for affinity purification of human serum albumin (HSA). Firstly, Cu(2+) ions were attached to sporopollenin particles (SP), then the supermacroporous PHEMA cryogel with embedded Cu(2+)-ASP was produced by free radical polymerization using N,N,N',N'-tetramethylene diamine (TEMED) and ammonium persulfate (APS) as initiator/activator pair in an ice bath. Embedded particles (10 mg) in PHEMA-based cryogel column were used in the adsorption/desorption of HSA from aqueous solutions. Optimum conditions of adsorption experiments were performed at pH 8.0 phosphate buffer, with flow rate of 0.5 mL/min, and at 5°C. The maximum amount of HSA adsorption from aqueous solution was very high (677.4 mg/g SP) with initial concentration 6 mg/mL. It was observed that HSA could be repeatedly adsorbed and desorbed to the embedded Cu(2+)-ASP in PHEMA cryogel without significant loss of adsorption capacity.     

Preparation and characterization of thermoresponsive isopropylacrylamide–hydroxyethylmethacrylate copolymer gels

A random copolymer of N-isopropylacrylamide and 2-hydroxyethylmeth-acrylate, poly(NIPAM-co-HEMA), having thermoresponsive character was prepared bya redox copolymerization method. Poly(ethylene glycol), PEG 4000 was included in the copolymerization recipe to increase the thermoresponsivity of copolymeric structure. Poly(NIPAM-co-HEMA) copolymer gels having more elastic character and higher mechanical strength relative to poly(NIPAM) gel could be achieved by the proposed copolymerization procedure. The equilibrium and dynamic response against the temperature were investigated for the gel matrices produced by changing the initial NIPAM/HEMA mol ratio and PEG 4000 concentration in the copolymerization mixture. The effective diffusion coefficient of water within the gel matrix was estimated for either swollen or shrunken states by applying an unsteady-state diffusion model on the dynamic swelling and shrinking behaviors of gel matrix prepared in the cylindrical form. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 527–541, 1998     

A new affinity-HPLC packing for protein separation: Cibacron blue attached uniform porous poly(HEMA-<Emphasis Type="Italic">co</Emphasis>-EDM) beads

In this study, a new affinity high-performance liquid chromatography (HPLC) stationary phase suitable for protein separation was synthesized. In the first stage of the synthesis, uniform porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate), poly(HEMA-co-EDM), beads 6.2 μm in size were obtained. Homogeneous distribution of hydroxyl groups in the bead interior was confirmed by confocal laser scanning microscopy. The plain poly(HEMA-co-EDM) particles gave very low non-specific protein adsorption with albumin. The selected dye ligand Cibacron blue F3G-A (CB F3G-A) was covalently linked onto the beads via hydroxyl groups. In the batch experiments, albumin adsorption up to 60 mg BSA/g particles was obtained with the CB F3G-A carrying poly(HEMA-co-EDM) beads. The affinity-HPLC of selected proteins (albumin and lysozyme) was investigated in a 25 mm×4.0-mm inner diameter column packed with CB F3G-A carrying beads and both proteins were successfully resolved. By a single injection, 200 μg of protein was loaded and quantitatively eluted from the column. The protein recovery increased with increasing flow rate and salt concentration of the elution buffer and decreased with the increasing protein feed concentration. During the albumin elution, theoretical plate numbers up to 30,000 plates/m were achieved by increasing the salt concentration.     

Gelatin-Immobilised Poly(hydroxyethyl methacrylate) Cryogel for Affinity Purification of Fibronectin

In this work, fibronectin purification from human plasma with the gelatin-immobilised poly(hydroxyethyl methacrylate) (PHEMA) cryogel has been evaluated. The PHEMA cryogel was prepared by cryo-polymerisation which proceeds in an aqueous solution of monomer frozen inside a plastic syringe. The PHEMA cryogel contained interconnected macrochannels of 10–200 μm in diameter. Gelatin molecules were covalently immobilised onto the PHEMA cryogel via carbodiimide activation. The gelatin-immobilised PHEMA cryogel was used to purify fibronectin from human plasma. Fibronectin adsorption from human plasma on the PHEMA cryogel was 0.30 mg/ml, while much higher adsorption values, up to 38 mg/ml, was obtained with the gelatin-immobilised PHEMA cryogel. The fibronectin adsorption capacity of the gelatin-immobilised PHEMA cryogel did not change with an increase in the flow rate of plasma. Up to 92 % of the adsorbed fibronectin was eluted using 2 M urea containing 1 M NaCl as elution agent. The adsorption–elution cycle was repeated ten times using the same PHEMA cryogel. No remarkable decrease was detected in the adsorption capacity of the gelatin-immobilised PHEMA cryogel.     

Catalase adsorption onto Cibacron Blue F3GA and Fe(III)-derivatized poly(hydroxyethyl methacrylate) membranes and application to a continuous system

Poly(2-hydroxyethyl methacrylate) (poly(HEMA)) membranes were prepared by UV-initiated photopolymerization of HEMA in the presence of an initiator (a-a′-azobisisobutyronitrile, AIBN). An affinity dye, i.e. Cibacron Blue F3GA (CB) was incorporated covalently and then complexed with Fe(III) ions. The polyHEMA-CB and polyHEMA-CB-Fe(III) derivatized membranes were used in the adsorption of catalase (CAT). The enzyme-loading capability of the Fe(III)-containing membrane (23.6 μg/cm²) was greater than that of the poly(HEMA)-CB derivatized membrane (17.1 μg/cm²). The adsorption phenomena appeared to follow a typical Langmuir isotherm. The K_m values for both immobilized catalases (poly(HEMA)-CB-CAT (22.4 mM) and poly(HEMA)-CB-Fe(III)-CAT (19.3 mM)) were higher than that of free enzyme (16.5 mM). Optimum operational temperature was 5°C higher than that of the free enzyme and was significantly broader. A similar observation was made for the optimum pH. Operational, thermal and storage stabilities were found to increase with immobilization, especially in the presence of Fe(III). It was observed that enzyme could be repeatedly adsorbed and desorbed without significant loss in adsorption capacity or enzyme activity.     

Timolol maleate release from pH-sensible poly(2-hydroxyethyl methacrylate-co-methacrylic acid) hydrogels

Multifunctional polymeric materials were obtained from poly(methacrylic acid-co-2-hydroxyethyl methacrylate), to be used as a raw material in the manufacture of contact lens and as drug delivery systems. Poly(methacrylic acid-co-2-hydroxyethyl methacrylate) was prepared by free-radical polymerization in aqueous solution at 60 °C using potassium persulfate (KPS) as initiator and N,N^′-methylenebisacrylamide (BIS) as cross-linker agent. The dynamic and equilibrium swelling properties of dry glassy poly(methacrylic acid-co-2-hydroxyethyl methacrylate) polymeric networks were studied as a function of pH and methacrylic acid (MAA) content. The water content increase as MAA content and pH increase. Timolol maleate delivery from poly(MAA) and poly(2-hydroxyethyl methacrylate) (HEMA) homopolymers was studied and the results show a Fickian diffusion behavior.     

Interpenetrating polymer networks templated on bicontinuous microemulsions containing silicone oil, methacrylic acid, and hydroxyethyl methacrylate

Polydimethylsiloxane-poly(methacrylic acid—hydroxyethyl methacrylate) interpenetrating polymer networks (PDMS-P(MAA–HEMA) IPN) were formulated and polymerized simultaneously from bicontinuous microemulsion templates. Microemulsions containing reactive silicone oils and MAA/HEMA in aqueous solution were stabilized with silicone surfactants, and were then reacted at 50 °C for 3 h under an N₂ atmosphere. The formation of bicontinuous morphology was confirmed by laser scanning confocal microscopy, reversible swelling behavior, differential scanning calorimetry, texture analysis, and permeability to vitamin B₁₂ in aqueous solution. Incorporating polymerizable surfactants into the microemulsion aided in stabilizing the initial microemulsion structure during polymerization, yielding a more uniform IPN morphology with domain sizes of <200 nm at equilibrium swelling. The process developed here demonstrates a simple, single-step polymerization approach to forming IPNs from low viscosity microemulsion templates, and could potentially be extended to a variety of hydrophilic and hydrophobic monomers.     

DNA adsorption via Co(II) immobilized cryogels

The separation and purification of important biomolecule deoxyribonucleic acid (DNA) molecules are extremely important. The adsorption technique among these methods is highly preferred as the adsorbent cryogels are pretty much used due to large pores and the associated flow channels. In this study, the adsorption of DNA via Co(II) immobilized poly(2-hydroxyethyl methacrylate-glycidyl methacrylate) [poly(HEMA-GMA)] cryogels was performed under varying conditions of pH, interaction time, initial DNA concentration, temperature, and ionic strength. For the characterization of cryogels; swelling test, Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), surface area (BET), elemental and ICP-OES analysis were performed. L-lysine amino acid was chosen as Co(II)-chelating agent and the adsorption capacity of cryogels was determined as 33.81 mg DNA/g cryogel. Adsorption of pea DNA was studied under the optimum adsorption conditions and DNA adsorption capacity of cryogels was found as 10.14 mg DNA/g cryogel. The adsorption process was examined via Langmuir and Freundlich isotherm models and the Langmuir adsorption model was determined to be more appropriate for the DNA adsorption onto cryogels.     

Adsorption of protein on the surface of thermosensitive poly(methyl methacrylate) microspheres modified with the N-(2-hydroxypropyl)methacrylamide and 2-(methacryloyloxy)ethyl phosphorylcholine moieties

A series of microspheres composed of methyl methacrylate (MMA) and N-(2-hydroxypropyl)methacrylamide (HPMA), and/or 2-(methacryloyloxy)ethyl phosphorylcholine (MPC), i.e., binary copolymer microspheres [poly(HPMA-co-MMA)_KPS and poly(HPMA-co-MMA)_ABIP] and ternary ones [poly(HPMA/MPC-co-MMA)_KPS and poly(HPMA/MPC-co-MMA)_ABIP], were prepared by emulsifier-free emulsion copolymerization using potassium peroxodisulfate (KPS) or 2,2′-azobis[2-(imidazolin-2-yl)propane] dihydrochloride (ABIP) as initiators. The decrease in ζ-potential of the polymer microspheres is caused by the addition of the HPMA and/or MPC moieties. Equilibrium water content of poly(HPMA-co-MMA)_ABIP showed a remarkable swelling change with a change in response to temperature: the hydrated conformation at 28°C and the dehydrated one at above 40°C. The adsorption of protein on the polymer microspheres also changed in response to change in temperature. The ternary polymer microspheres effectively suppressed the adsorption both of Alb and Glo, less than binary ones. A series of polymer microspheres are expected to apply as a novel drug carrier with both thermosensitive and nonthrombogenic functions. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3349–3357, 1997