2-(2-喹啉偶氮)-1,5-二氨基苯固相萃取光度法测定钴

合成了新试剂2 (2 喹啉偶氮) 1,5 二氨基苯(QADAB),研究了其与钴的显色反应及C18固相萃取小柱对显色络合物的固相萃取,在pH3.5磷酸盐缓冲介质中,CTMAB存在下,QADAB与钴反应生成2∶1稳定络合物,该络合物可用C18固相萃取小柱富集,小柱上富集的络合物用乙醇(内含2%乙酸)洗脱后用光度法测定,λmax=590nm,ε=8.36×104L·mol-1·cm-1。钴含量在0.01～0.80mg·L-1内符合比耳定律,方法用于环境样品中钴含量的测定,结果满意。     

2-(2-喹啉偶氮)-1,5-苯二酚光度法测定银的研究

研究了2 (2 喹啉偶氮) 1,5 苯二酚(QADHB)试剂与银的显色反应,在pH 5.0的柠檬酸氢氧化钠缓冲(内含0. 01 mol·L-1 的Na2EDTA)介质中,十二烷基磺酸钠(SDS)存在下,QADHB与银反应生成2∶1 稳定的络合物,λmax=550 nm,ε=6.56×104L·mol-1·cm-1。银含量在0~30μg/25 mL内符合比耳定律,方法用于环境水样中银含量的测定,结果满意。     

2-（2-喹啉偶氮）-1，5-二氨基苯固相萃取光度法测定痕量钯

根据2-（2-喹啉偶氮）-1,5-二氨基苯（QADAB）与钯的显色反应及MCI—GEL反相固相萃取小柱对显色络合物的固相萃取,建立了一种测定痕量钯的方法。在0．2～3.0mol·L^-1高氯酸介质中,溴化十六烷基三甲胺（CTMAB）存在下,QADAB与钯反应生成2：1稳定络合物,该络合物可被MCI—GEL反相固相萃取小柱萃取富集,富集的络合物用丙酮洗脱后用光度法测定,在丙酮介质中体系的最大吸收波长为600nm,表观摩尔吸光率为9．63×10^4L·mol^-1·cm^-1。钯质量浓度在0．01～1.5mg·L^-1内符合比耳定律,方法用于几种实样中痕量钯的测定,测得回收率在86％～96％间。     

2-(2-喹啉偶氮)-4-甲基-1,3-苯二酚固相萃取光度法测定铜的研究

合成了新试剂2-(2-喹啉偶氮)-4-甲基-1,3-苯二酚(QAMDHB),并研究了试剂与铜的显色反应,在pH 2.2磷酸-磷酸二氢钾缓冲介质中,溴化十六烷基三甲基胺(CTMAB)存在下,QAMDHB与铜反应生成21稳定络合物,该络合物可被Waters PorapakR Sep-Park-C18固相萃取小柱萃取,用乙醇洗脱后用光度法测定,在乙醇相中λmax=550nm,ε=3.92×104L@mol-1@cm-1.铜含量在0～1.0μg@ml-1范围内符合比耳定律,方法用于环境水样中铜含量的测定,结果满意.     

2-(4-羧基苯偶氮)苯并噻唑固相萃取分光光度法测定铂的研究

根据新试剂2-(4-羧基苯偶氮)苯并噻唑(CPABT)与铂的显色反应及C8固相萃取小柱对显色络合物的固相萃取,建立了一种测定痕量铂的新方法,在pH为3.8~5.5的乙酸-乙酸钠缓冲介质中,在Tween-80存在下,铂与CPABT发生反应形成1∶1的稳定络合物,该络合物可用C8固相萃取小柱富集,小柱上富集的络合物用二甲基甲酰胺洗脱后用分光光度法测定,在富集后的测定液中,络合物最大吸收波长为508 nm,摩尔吸光系数ε=2.29×105L.mol-1.cm-1,Pt4 量在0.1~1.2μg/mL内符合比尔定律,方法已用于测定催化剂中的铂。     

微波消解和固相萃取光度法测定氰化渣中痕量钯

根据 2_(2_喹啉偶氮 )_5_二甲氨基苯甲酸 (QADMAB)与钯的显色反应及C18固相萃取小柱对显色络合物的固相萃取 ,并结合微波消解样品 ,建立了一种测定氰化渣中痕量钯的方法。即在pH为 3 5的HAc_NaAc缓冲介质中 ,溴化十六烷基三甲胺 (CTMAB)存在下 ,QADMAB与钯反应生成 2 1稳定络合物 ,该络合物可被C18小柱萃取富集 ,富集的络合物用乙醇洗脱后用光度法测定 ,在乙醇介质中体系λmax=63 0nm ,ε=1 2 0× 1 0 5L·mol-1·cm-1。钯含量在 0 0 1～ 1 5mg L内符合比尔定律 ,方法用于氰化渣中钯含量的测定 ,结果令人满意。     

磺硝酚偶氮若丹宁固相萃取光度法测定环境样品中的铅

在pH 4.5的HAc NaAc缓冲介质中 ,吐温 - 80存在下 ,磺硝酚偶氮若丹宁 (NSPAR)与铅反应生成 2∶1稳定络合物 ,该络合物可被WatersSep PakC1 8小柱固相萃取 ,用氮 氮二甲基甲酰胺 (DMF)洗脱后用光度法测定。在洗脱液介质中 ,λmax=5 5 5nm ,体系摩尔吸光系数ε=1 .0 2× 1 0 5L·mol- 1 ·cm- 1 。铅质量浓度在 0 .0 5～ 4.0 μg/mL内符合比尔定律 ,本方法可用于环境样品中铅的测定     

5-苯基偶氮-8-(4-羧基苯偶氮氨基)喹啉与铜(Ⅱ)显色反应研究

合成了5-苯基偶氮-8-(4-羧基苯偶氮氨基)喹啉(PACPAQ)。在pH8.2的硼砂缓冲介质中,在CTMAB存在下,铜(Ⅱ)与PACPAQ形成1:4紫红色络合物,λ_(max)为540nm,ε=6.9×10~4·L·mol~(-1)·cm~(-1),铜量在0～10μg/25ml范围内符合比尔定律.用于粗铅和水中铜的测定,结果满意。     

2-(2-喹啉偶氮)-1,5-二氨基苯固相萃取光度法测定痕量钯

根据2-(2-喹啉偶氮)-1,5-二氨基苯(QADAB)与钯的显色反应及MCI-GEL反相固相萃取小柱对显色络合物的固相萃取,建立了一种测定痕量钯的方法.在0.2～3.0 mol·L-1高氯酸介质中,溴化十六烷基三甲胺(CTMAB)存在下,QADAB与钯反应生成2:1稳定络合物,该络合物可被MCI-GEL反相固相萃取小柱萃取富集,富集的络合物用丙酮洗脱后用光度法测定,在丙酮介质中体系的最大吸收波长为600 nm,表观摩尔吸光率为9.63×104L·mol-1·cm-1.钯质量浓度在0.01～L 5 mg·L-1内符合比耳定律,方法用于几种实样中痕量钯的测定,测得回收率在86%～96%间.     

新试剂1-(4-安替比林偶氮)-4-氨基-2-萘甲酸与铜显色反应研究

在pH60HAc－NH4Ac缓冲介质中,CTMAB存在下,1－（4-安替比林偶氮）－4氨基一2一萘甲酸（AANA）与铜生成2：1红色络合物,λmax＝540nm,ε=4.06×104L·Lmol-1·cm-1,铜含量在0－30μg/25内符合比尔定律,方法用于食品中铜的测定,结果满意。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.