Effect of molecular interactions on the miscibility and structure of polymer blends

The effect of polymer-polymer interactions on the miscibility and macroscopic properties of PVC/PMMA, PVC/PS and PMMA/PS blends were studied in the entire composition range. The miscibility of the components was characterized by the Flory-Huggins interaction parameter or by quantities related to it. Thermal analysis, light transmittance measurements, and scanning electron microscopy were carried out on the blends and their mechanical properties were characterized by tensile tests. Interactions were analyzed by infrared spectroscopy and contact angle measurements. All three polymer pairs form heterogeneous blends, but the strength of molecular interactions is different in them, the highest is in PVC/PMMA system resulting in partial miscibility of the components and beneficial mechanical properties. The structure of these blends depends strongly on composition. A phase inversion can be observed between 0.5 and 0.6 PMMA content accompanied with a significant change in structure and properties. The PVC/PS and the PMMA/PS pairs are immiscible, though the results indicate the partial solubility of the components. The analysis of the surface characteristics of the components and the comparison of quantities derived from them with miscibility as well as with the macroscopic properties of blends revealed that blend properties cannot be predicted in this way, since they are affected by several factors.     

Solvent effect on the miscibility of polymer blends

Starting from the Flory-Huggins theory applied to a polymer/polymer/solvent solution, an expression has been derived showing the overall effect of solvent on the composition of the polymer blend in the final solid state. This expression has been experimentally verified by investigating the miscibility of two polymer blends: polystyrene/poly(α-methylstyrene) cast from tetrahydrofuran and cyclohexane, and polystyrene/poly (methyl methacrylate) obtained from tetrahydrofuran and chloroform. Besides the usual differential scanning calorimetry technique, thermogravimetric analysis might be helpful for detecting the miscibility of polymer blends.     

Monte Carlo simulation of miscibility of polymer blends with repulsive interactions: effect of chain structure

The effects of the chain structure and the intramolecular interaction energy of an A/B copolymer on the miscibility of the binary blends of the copolymer and homopolymer C have been studied by means of a Monte Carlo simulation. In the system, the interactions between segments A, B and C are more repulsive than those between themselves. In order to study the effect of the chain structure of the A/B copolymer on the miscibility, the alternating, random and block copolymers were introduced in the simulations, respectively. The simulation results show that the miscibility of the binary blends strongly depends on the intramolecular interaction energy () between segments A and B within the A/B copolymers. The higher the repulsive interaction energy, the more miscible the A/B copolymer and homopolymer C are. For the diblock copolymer/homopolymer blends, they tend to form micro phase domains. However, the phase domains become so small that the blend can be considered as a homogeneous phase for the alternating copolymer/homopolymer blends. Furthermore, the investigation of the average end-to-end distance () in different systems indicates that the copolymer chains tend to coil with the decrease of whereas the of the homopolymer chains depends on the chain structure of the copolymers. As for the system containing the alternating or the random copolymers, the homopolymer chains also tend to coil with the decrease of . However, for the systems including the block copolymers, there is a slight difference in the of the homopolymer chains with the variation of .     

Orientation-dependent interactions in polymer systems: Segmental orientation,miscibility, and self-organization

Three co-operative phenomena that are supposed to originate in the orientation-dependent interactions among polymer segments are discussed and attempted to be interpreted in terms of a common set of polymer models.     

Extraction of nanofibers from polymer blends: A brief review

This review is about the naturally formed and intentionally produced nanofibrils or nanofibers (NFs) that have been extracted and utilized or expected to be used for special applications. The diameter of NFs ranges between a few to a few hundred nanometers. Methods to arrange synthetic NFs assembly in yarns or pads forms have been examined. High throughput productions, versatility of various thermoplastics, and less environmental pollution are the advantages of the methods of extraction, which seems to make it as an economical process. It can also be used for the polymers that are difficult to be converted to NFs by electrospinning. The process is challenging and scientifically fascinating to attract the investigators. There are many more polymers to be considered, and there are many more envisioned applications that have to be practiced in the future. A theoretical base is needed for the evaluation of the effects of polymer flow parameters on the extracted NFs properties.     

Small-angle neutron scattering study on the miscibility and concentration fluctuation of hydrogen-bonded polymer blends

Thermal concentration fluctuation in the blends of deuterated poly(ethylene oxide) (dPEO) and poly(vinyl acetate-co-vinyl alcohol) [P(VAc-VOH)] with various VOH contents f_OH were examined by small angle neutron scattering techniques at a fixed blend composition, dPEO/P(VAc-VOH) = 20/80 which is close to the critical composition. Blends at the highest f_OH (=0.35) showed a non-Lorentzian scattering profile: specifically the scattering intensities at the low q (angle) region were suppressed compared to those expected from the random phase approximation (RPA) theory. However, for the blends at lower f_OH (≤0.28), the profiles could be represented by the RPA. Using the RPA we determined effective values of the Flory-Huggins interaction parameter χ_eff as a function of f_OH (=0–0.28). The χ_eff showed the minimum around f_OH = 0.1–0.18 meaning the highest miscibility of the blend at these f_OH. On the basis of the random copolymer theory, we evaluated the three interaction parameters χ_Ac–EO, χ_EO–OH, and χ_Ac–OH separately from the χ_eff(f_OH) and found the order of magnitude; χ_Ac–EO < 0 < χ_EO–OH < χ_Ac–OH. The largest positive χ_Ac–OH showing intrachain interaction in the P(VAc-VOH) copolymer was concluded to be the origin of the enhanced miscibility at around f_OH = 0.1–0.18. On the basis of the Coleman and Painter's theory, the effects of hydrogen bonding on these three χ_A-B were discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2556–2565, 2008     

FTIR studies of polar interactions in polymer blends

Specific interactions in binary blends of poly(vinyl chloride) (PVC) with ethylene–vinyl acetate copolymers (EVA) and ethylene-methyl acrylate copolymers (EMA) were investigated by observation of band shifts of the carbonyl absorption using ATR-FTIR spectroscopy at variable temperature. Blends of PVC with EVA and EMA could be prepared as heterogeneous, homogeneous or metastable homogeneous mixtures, depending on the copolymer composition. The miscible systems as well as the heterogeneous ones showed only very small or no band shifts. The metastable blends exhibited shifts of several wave numbers to lower values, which vanished at higher temperatures as the blends demixed. Strong interactions in the metastable blends could be related to good impact properties of the corresponding two-phase systems.     

Influence of blend miscibility on the proton conductivity and methanol permeability of polymer electrolyte blends

The influence of miscibility on the transport properties of polymer electrolyte blends composed of a proton conductor and an insulator was investigated. The proton‐conductive component in the blends was sulfonated poly(ether ketone ketone) (SPEKK), while the nonconductive component was either poly(ether imide) (PEI) or poly(ether sulfone) (PES). The phase behavior of PEI‐SPEKK blends was strongly influenced by the sulfonation level of the SPEKK. At low sulfonation levels (ion‐exchange capacity (IEC) = 0.8 meq/g), the blends were miscible, while at a slightly higher level (IEC = 1.1 meq/g), they were only partially miscible and for IEC ≥ 1.4 meq/g they were effectively immiscible over the entire composition range. The PES‐SPEKK blends were miscible over the entire range of SPEKK IEC considered in this study (0.8–2.2 meq/g). At high IEC (2.2 meq/g) and at low mass fractions of SPEKK (<0.5), the miscible blends (PES‐SPEKK) had higher proton conductivities and methanol permeabilities than the immiscible ones (PEI‐SPEKK). The opposite relationship was observed for high mass fractions of SPEKK (>0.5). This behavior was explained by the differences in morphology between these two blend systems. At low IEC of SPEKK (0.8 meq/g), where both PEI‐SPEKK and PES‐SPEKK blend systems exhibited miscibility, the transport properties were not significantly different. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2253–2266, 2006     

Intermolecular interactions in polymer blends: 1D and 2D NMR studies

Most mixtures of high molecular weight polymers are not miscible in the absence of specific intermolecular interactions. We have used two dimensional NMR in solutions and in the solid state to probe these interactions and to gain a molecular level understanding of the forces that control polymer blend formation. The results show that weak, but specific intermolecular interactions often control the phase structure of polymer blends.     

The use of near infrared (NIR) spectroscopy to study specific interactions in polymer blends

The purpose of this brief communication is to demonstrate how near infrared (NIR) spectroscopy can be used to study specific interactions is miscible polymer blends. We will first demonstrate, using model systems and blends of polycaprolactone (PCL) and phenoxy [poly(hydroxypropylether of bisphenol-A)], that information obtained from the OH stretch overtone absorption in the NIR is consistent with the information obtained from the OH stretch fundamental in the mid-IR region. We will then illustrate the advantages of NIR analysis of specific interaction with spectra obtained, over a range of temperatures, from thick (2 mm) films of blends of Nylon-6 and the zinc salt of sulfonated polystyrene (ZnSPS). © 1994 John Wiley & Sons, Inc.     

Δχ effects on the miscibility of polymer blends

The Δχ effect on the miscibility of polymer blends prepared by solution-casting has been investigated using the mixture of poly(methyl methacrylate)(PMMA) with poly(vinyl acetate) (PVAc). The PMMA/PVAc blends have been prepared by casting from eleven different solutions. The Δχ effect of the solution–cast PMMA/PVAc blends was discussed in terms of Hansen's specified solubility parameters. It was found that the miscibility of the blends could be defined mainly by the solubility parameter contributed by the hydrogen–bonding of a solvent.     

Study of the miscibility and segmental motion of STMAA-PBMA polymer blends and semi-interpenetrating polymer networks by an ESR spin probe method

Linear polymer blends and semi-interpenetrating polymer networks (IPNs) with controlled hydrogen bonding interactions based on poly(styrene-co-methacrylic acid) (STMAA) and poly(butyl methacrylate) (PBMA) were studied by an ESR spin probe method. The observed composite ESR spectra with fast- and slow-motion components in all the samples were ascribed to two-phase morphology. For linear blends, the temperatures T(a) corresponding to appearance of the fast motion, T(d) corresponding to the disappearance of slow motion, T(5mT) and the rotational correlation times tau(c) increased with increasing carboxylic acid content in STMAA. It was concluded that the degree of mixing of the blends was improved with increasing carboxylic acid content, owing to the enhanced hydrogen bonding interactions between the carboxylic acids in STMAA and the ester groups in PBMA. With respect to semi-IPN samples, there existed a competition in the microphase structure between the intercomponent hydrogen bonding interactions, which improved the miscibility of the samples and the intracomponent cross-linking, which might lead to phase separation in the systems with strong specific interactions. When the semi-IPN contained 29 mol% carboxylic acid, the temperatures T(d), T(5mT) and tau(c) reached their minimum values, which indicated that the sample reached its maximum miscibility.     

Ternary blends of poly(ethylene oxide) and acrylate-based copolymers: Crystallinity, miscibility, interactions and proton conductivity

In the present work, blends of poly(ethylene oxide) (PEO), poly(acrylonitrile-co-methyl acrylate) (PANMA) and poly(4-vinylphenol-co-2-hydroxyethyl methacrylate) (PVPh-HEM) were studied by DSC, FTIR and electrochemical impedance spectroscopy (EIS). PEO/PANMA blends were found to be immiscible, while PEO/PVPh-HEM blends are miscible and PVPh-HEM/PANMA exhibits partial miscibility behaviour. The ternary PEO/PANMA/PVPh-HEM blends exhibited miscible compositions for PVPh-HEM and PEO-rich systems. The miscibility observed is a direct consequence of the hydrogen bond interactions among the polymer chains, in which the phenol groups in PVPh-HEM interact with both PEO and PANMA chains. The proton conductivity of a selected membrane based on the ternary blend containing 60% PEO and doped with H₃PO₄ aqueous solution reached 8 × 10⁻³ Ω⁻¹ cm⁻¹ at room temperature and 3 × 10⁻² Ω⁻¹ cm⁻¹ at 80 °C.     

Equilibrium constants and the prediction of miscibility windows for polymer blends containing poly(tetrafluoroethylene-alt-vinyl alcohol)

Theoretical calculations of miscibility windows for binary polymer blends in which one component is an essentially alternating copolymer of tetrafluoroethylene and vinyl alcohol (FVOH) are reported. FVOH has an inherently low solubility parameter [≈ 6.2 (cal. cm^?3)^0.5] that is outside the range commonly encountered in miscible polymer blends and thus represents a stringent test of the predictive capabilities of an association model we have used in previous work. The application of this model requires that we determine dimensionless equilibrium constants describing the self-association of a model compound 3,4-pentafluorobutan-2-ol (PFB) at 25°C from infrared spectroscopic data. Analogous equilibrium constants for FVOH were scaled from those of PFB by taking into account differences in the molar volume of the model and the specific repeat of the copolymer (see M. M. Coleman, J. F. Graf, and P. C. Painter: Specific Interactions and the Miscibility of Polymer Blends, Technomic, Lancaster, PA, 1991). Equilibrium constants describing the inter-association of FVOH with ester type carbonyl groups were obtained from spectroscopic studies of miscible blends with poly(ethyl methacrylate). These equilibrium constant values were then used to calculate theoretical miscibility windows for the complete range of blends of FVOH with polymethacrylates, ethylene-co-methyl acrylate, styrene-co-methyl acrylate, and ethylene-co-vinyl acetate copolymers. Experimental results performed in our laboratories confirm the general validity of the predicted miscibility windows. © 1993 John Wiley & Sons, Inc.     

Modeling of interface mobility in the description of flow-induced coalescence in immiscible polymer blends

A new semiempirical equation has been proposed for the rate of approach of highly flattened droplets, applicable in the whole range of the ratios, p, of viscosity of the dispersed droplets and matrix. The equation is utilized to calculate the probability, P _c, that the droplet collision induced by shear or extensional flow is followed by the droplet fusion for systems with Newtonian droplets and Newtonian or viscoelastic matrix. The comparison of the results of these calculations with available experimental data and with the calculation using the trajectory analysis shows that the proposed model of the matrix drainage provides more reasonable results than the broadly applied model of partially mobile interface.     

Eutectic crystallization and hydrogen bonding interactions in polymer/surfactant blends

The unusual eutectic crystallization behavior in the poly(ε‐caprolactone) (PCL) and 3‐pentadecylphonel (PDP) binary blends was investigated by differential scanning calorimetry and Fourier transform infrared (FTIR) spectroscopy. A eutectic system was found with the eutectic composition at 60 wt % PDP and the eutectic melting temperature at 35 °C. The melting process of the blend at the eutectic composition was studied by in situ FTIR. The concurrence of the melting of PCL and PDP crystallites and the sequential formation of hydrogen bonding interaction between PDP molecules and PCL chains were traced. It was also found that a further increase in temperature above the eutectic melting temperature would impair the hydrogen bonding and increase the content of nonassociated phenol hydroxyl group. The semicrystalline morphology of blends affected by the composition was also investigated. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1015–1023, 2009     

多金属氧化物立方纳米晶体的可控合成及其与朊蛋白的特异性相互作用

研究表明,在有机小分子二甲基甲酰胺（DMF）的调控作用下Keggin型多金属氧化物在水溶液中形成规则的纳米立方体,随温度改变该纳米立方体转变为空心立方结构．该多金属氧化物纳米立方体可以与朊蛋白（PrP^c）相互作用,产生显著的光散射信号增强,且增强程度在3．36-840ng·mL^-1范围内与朊蛋白浓度呈线性关系．