Palladium/GF-Phos-catalyzed asymmetric carbenylative amination to access chiral pyrrolidines and piperidines

The cross-coupling of N-tosylhydrazones has emerged as a powerful method for the construction of structurally diverse molecules, but the development of catalytic enantioselective versions still poses considerable challenges and only very limited examples have been reported. We herein report an asymmetric palladium/GF-Phos-catalyzed carbenylative amination reaction of N-tosylhydrazones and (E)-vinyl iodides pendent with amine, which allows facile access to a range of chiral pyrrolidines and piperidines in good yields (45–93%) with up to 96.5 : 3.5 er. Moreover, mild conditions, general substrate scope, scaled-up preparation, as well as the efficient synthesis of natural product (−)-norruspoline are practical features of this method.

An efficient asymmetric palladium/GF-Phos-catalyzed carbenylative amination reaction to access structurally diverse chiral pyrrolidines and piperidines in good yields with high chemo-, regio- and enantioselectivities has been developed.

N-tosylhydrazones, readily prepared from aldehydes or ketones, served as a safe source of carbene precursors and have attracted much attention of chemists.¹N-tosylhydrazone-mediated applications have been continuously developed, such as cyclopropanation or cyclopropenation, X–H insertion, ylide formation, cycloaddition, aza-Wacker-type cyclization, asymmetric allylic substitution, etc.² Among them, transition-metal-catalyzed cross-coupling is one of the powerful protocols for C–X or C C bond formation in organic synthesis involving versatile intermediates, of which in situ generation of diazo compounds and carbene migratory insertion are considered key steps.^3–5 Over the past decades, considerable progress has been made in the asymmetric cross-coupling reactions of N-tosylhydrazones with various coupling partners, including cyclobutanols, terminal alkynes, silacyclobutanes and so on.⁴ Relatively, only a few examples focus on the cross-coupling reactions of aryl halides with N-tosylhydrazones involving benzyl metal intermediates [Scheme 1A, eqn. (a)].⁶ For example, Gu,^6a Wu,^6b Lassaletta^6c and coworkers have developed a palladium-catalyzed asymmetric synthesis of axial chiral compounds from aryl bromides and N-tosylhydrazones, ending with β-H elimination. Very recently, we realized palladium/GF-Phos catalyzed asymmetric three component cross-coupling reactions of aryl halides, N-tosylhydrazones, with terminal alkynes.^6f In contrast, much less progress has been made in N-tosylhydrazone-based carbenylative insertions from vinyl halides, which would generate a π-allylic metal intermediate followed by nucleophile attack, providing a unique approach for building C–X bonds, especially for N-heterocyclic compounds [Scheme 1A, eqn. (b)].⁷N-heterocycles are important structural motifs for the development of various types of valuable chemicals and materials.⁸ Importantly, optically active 2-substituted pyrrolidine and piperidine derivatives are privileged scaffolds in many natural products and pharmaceuticals with a wide range of biological activities,⁹ as well as the backbone of organocatalysts in asymmetric catalysis (Fig. 1).¹⁰Open in a separate windowScheme 1Asymmetric transition-metal-catalyzed carbenylative cross-coupling reactions.Open in a separate windowFig. 1Selected natural products and pharmaceuticals containing chiral 2-substituted pyrrolidine and piperidine units.Notably, Van Vranken and coworkers reported an elegant palladium-catalyzed carbenylative amination reaction of N-tosylhydrazones and (E)-vinyl iodides pendent with amine, providing facile access to pyrrolidine and piperidine ring systems that are common to alkaloid natural products (Scheme 1B).¹¹ Unfortunately, only up to 58.5 : 41.5 er was obtained after they made a lot of efforts to screen a series of chiral phosphine ligands, indicating that this asymmetric reaction indeed poses considerable challenges in addition to competitive side reactions such as the dimerization of vinyl iodides,¹² the formation of diene via the palladatropic rearrangement/β-H elimination or allene via β-H elimination from C_sp²,¹³ and the π-allylpalladium intermediate trapped by the byproduct sulfinic acid salt.¹⁴ Given the significance of chiral pyrrolidines and piperidines as core structures in alkaloid natural products, the development of an asymmetric version of this elegant carbenylative amination reaction is highly desirable. In recent years, our group has developed a series of chiral sulfinamide phosphine ligands (so-called Sadphos), which showed unique potential in asymmetric transition-metal catalysis,^6f,15 so we wondered whether Sadphos could address this challenging asymmetric carbenylative amination reaction (Scheme 1C).Initially, our study began with (E)-vinyl iodide 1a and N-tosylhydrazone 2a in the presence of Pd₂(dba)₃, t-BuOLi, Et₃N, and triethylbenzylammonium chloride (TEBAC) in THF at 30 °C. A series of commercially available chiral ligands were first screened (Fig. 2). Only (R, R)-DIOP (L1), (R)-DTBM-SegPhos (L3) and (R)-MOP (L4) provided the desired product 3aa with poor enantioselectivity and other ligands such as (R, R)-Ph-BPE (L2), (R, S)-Josiphos (L5) and (S, S)-ⁱPr-FOXAP (L6) showed low reactivity. We next turned to systematically investigate Sadphos, such as Wei-Phos,¹⁶ Xiao-Phos,^15d,17 Ming-Phos,^15a,18 Xu-Phos,^15b,19 Xiang-Phos²⁰ and PC-Phos^15c,21 (Fig. 2). To our delight, PC1 delivered 3aa in 32% yield and 85.5 : 14.5 er. Inspired by this result, we further screened PC2–PC5 which vary in the substituent of phenyl, but unfortunately none of them showed better results. Surprisingly, the reactivity of this reaction could be greatly improved with our recently developed GF-Phos GF1, delivering 71% yield. When steric hindered tert-butyl groups were introduced on the phenyl group (GF2), the product 3aa was obtained in 77% yield with 91.5 : 8.5 er. After screening different palladium catalysts and solvents (Open in a separate windowFig. 2Screened chiral ligands.Optimization of reaction conditions^a

Ligand design for Rh(iii)-catalyzed C–H activation: an unsymmetrical cyclopentadienyl group enables a regioselective synthesis of dihydroisoquinolones

We report the regioselective synthesis of dihydroisoquinolones from aliphatic alkenes and O-pivaloyl benzhydroxamic acids mediated by a Rh(iii) precatalyst bearing sterically bulky substituents. While the prototypical Cp* ligand provides product with low selectivity, sterically bulky Cp^t affords product with excellent regioselectivity for a range of benzhydroxamic acids and alkenes. Crystallographic evidence offers insight as to the source of the increased regioselectivity.C–H activation mediated processes have provided a unique retrosynthetic approach to access a variety of substituted heterocycles.¹ One tactic that has received increased attention is the coupling of π-components with heteroatom containing molecules.² A variety of transition metals are capable of catalyzing this type of transformation, providing access to dozens of heterocyclic motifs.^1–3 A challenge for these methods is controlling the regioselectivity of migratory insertion across alkenes and alkynes after the metallacycle forming C–H activation (eqn 1).Steric and electronic effects are understood to control migratory insertion of unsymmetrical alkynes in Rh(iii) catalyzed isoquinolone syntheses (eqn 1). When the substituents are electronically similar, the larger group resides β- to Rh in the metallacycle to avoid unfavorable steric interactions (selectivity is generally >10 : 1).⁴ When the substituents are electronically different, the more electron-donating group prefers being α- to rhodium in the metallacycle, presumably to stabilize the electron poor metal.^5,6 The type of C–H bond being activated also plays an important role in the regioselectivity of migratory insertion; aromatic substrates typically provide synthetically useful regioselectivities when electronically different alkynes are used (>10 : 1) but alkenyl C–H activation leads to products with lower regioselectivities, presumably due to minimal steric interactions during migratory insertion.^7,8 We found that sterically bulky di-tert-butylcyclopentadienyl ligand (Cp^t) enhances the regioselectivity of the alkyne migratory insertion event in these cases, delivering regioselectivities (>10 : 1) modestly above those achievable by Cp* ligated Rh complexes (<6 : 1). However, when the alkyne migratory insertion was poorly selective with RhCp* (<3 : 1), RhCp^t complex was ineffective at providing synthetically useful levels of selectivity. Furthermore, the Cp^t ligand was only effective with aryl substituted alkynes, presumably because of strong steric interactions between the ligand and alkyne in the insertion event. Migratory insertion of alkenes to access heterocycles using C–H activation chemistry is still relatively rare, with seminal studies by Glorius and Fagnou reporting the synthesis of dihydroisoquinolones.^9–11 Similar to alkynes, alkenyl electron-donating groups favor the position adjacent to the metal in the metallacycle delivering high regioselectivity. In contrast to alkynes, aliphatic alkenes afford product with poor regioselectivity (2 : 1) (eqn 2).^5h,12 We hypothesized competing steric and electronic effects cause the low regioselectivity, with steric effects favoring the formation of a 4-substituted product and electronics favoring the formation of a 3-substituted product.¹³ As a temporary solution to this problem, our group and others have employed tethering strategies to increase the regioselectivity of the migratory insertion event (eqn 3).^14,15 Of course, regioselectivity controlled by the ligand on Rh would be the optimal solution to the selectivity problem (eqn 4).¹⁶ Consequently, we focused our attention toward developing an intermolecular variant of this reaction that would provide product with improved regioselectivity.As a model system, we explored the impact ligands have on the coupling of O-pivaloyl-benzhydroxamic acid 1a with 1-decene 2a to provide dihydroisoquinolones 3a and 3a′. When Cp* is used as a ligand, the desired products are isolated in excellent yield but poor selectivity (2.4 : 1 3a : 3a′) ( a

Ligand-promoted palladium-catalyzed β-methylene C–H arylation of primary aldehydes

The transient directing group (TDG) strategy allowed long awaited access to the direct β-C(sp³)–H functionalization of unmasked aliphatic aldehydes via palladium catalysis. However, the current techniques are restricted to terminal methyl functionalization, limiting their structural scopes and applicability. Herein, we report the development of a direct Pd-catalyzed methylene β-C–H arylation of linear unmasked aldehydes by using 3-amino-3-methylbutanoic acid as a TDG and 2-pyridone as an external ligand. Density functional theory calculations provided insights into the reaction mechanism and shed light on the roles of the external and transient directing ligands in the catalytic transformation.

Aliphatic aldehydes are among the most common structural units in organic and medicinal chemistry research. Direct C–H functionalization has enabled efficient and site-selective derivatization of aliphatic aldehydes.

Simple aliphatic functional groups enrich the skeletal backbones of many natural products, pharmaceuticals, and other industrial materials, influencing the utility and applications of these substances and dictating their reactivity and synthetic modification pathways. Aliphatic aldehydes are some of the most ubiquitous structural units in organic materials.¹ Their relevance in nature and industry alike, combined with their reactivity and synthetic versatility, attracted much attention from the synthetic organic and medicinal chemistry communities over the years (Fig. 1).² Efficient means to the functionalization of these molecules have always been highly sought after.Open in a separate windowFig. 1Select aliphatic aldehyde-containing medicines and biologically active molecules.Traditionally, scientists have utilized the high reactivity of the aldehyde moiety in derivatizing a variety of functional groups by the means of red-ox and nucleophilic addition reactions. The resourceful moiety was also notoriously used to install functional groups at the α-position via condensation and substitution pathways.³ Although β-functionalization is just as robust, it has generally been more restrictive as it often requires the use of α,β-unsaturated aldehydes.^4,5 Hence, transition metal catalysis emerged as a powerful tool to access β-functionalization in saturated aldehydes.⁶ Most original examples of metal-catalyzed β-C–H functionalization of aliphatic aldehydes required the masking of aldehydes into better metal coordinating units since free unmasked aldehydes could not form stable intermediates with metals like palladium on their own.⁷ Although the masking of the aldehyde moiety into an oxime, for example, enabled the formation of stable 5-membered palladacycles, affording β-functionalized products, this system requires the installation of the directing group prior to the functionalization, as well as the subsequent unmasking upon the reaction completion, compromising the step economy and atom efficiency of the overall process.⁸ Besides, some masking and unmasking protocols might not be compatible with select substrates, especially ones rich in functional groups. As a result, the development of a one-step direct approach to the β-C–H functionalization of free aliphatic aldehydes was a demanding target for synthetic chemists.α-Amino acids have been demonstrated as effective transient directing groups (TDGs) in the remote functionalization of o-alkyl benzaldehydes and aliphatic ketones by the Yu group in 2016.⁹ Shortly after, our group disclosed the first report on the direct β-C–H arylation of aliphatic aldehydes using 3-aminopropanoic acid or 3-amino-3-methylbutanoic acid as a TDG.¹⁰ The TDG was found to play a similar role to that of the oxime directing group by binding to the substrate via reversible imine formation, upon which, it assists in the assembly of a stable palladacycle, effectively functionalizing the β-position.¹¹ Since the binding of the TDG is reversible and temporary, it is automatically removed upon functionalization, yielding an efficient and step-economic transformation. This work was succeeded by many other reports that expanded the reaction and the TDG scopes.^12–14 However, this system suffers from a significant restriction that demanded resolution; only substitution of methyl C–H bonds of linear aldehydes was made possible via this approach (Scheme 1a–e). The steric limitations caused by incorporating additional groups at the β-carbon proved to compromise the formation of the palladacycle intermediate, rendering the subsequent functionalization a difficult task.¹²Open in a separate windowScheme 1Pd-catalyzed β-C–H bond functionalization of aliphatic aldehydes enabled by transient directing groups.Encouraged by the recent surge in use of 2-pyridone ligands to stabilize palladacycle intermediates,^15,16 we have successfully developed the first example of TDG-enabled Pd-catalyzed methylene β-C–H arylation in primary aldehydes via the assistance of 2-pyridones as external ligands (Scheme 1f). The incorporation of 2-pyridones proved to lower the activation energy of the C–H bond cleavage, promoting the formation of the intermediate palladacycles even in the presence of relatively bulky β-substituents.¹⁷ This key advancement significantly broadens the structural scopes and applications of this process and promises future asymmetric possibilities, perhaps via the use of a chiral TDG or external ligand or both. Notably, a closely related work from Yu''s group was published at almost the same time.¹⁸We commenced our investigation of the reaction parameters by employing n-pentanal (1a) as an unbiased linear aldehyde and 4-iodoanisole (2a) in the presence of catalytic Pd(OAc)₂ and stoichiometric AgTFA, alongside 3-amino-3-methylbutanoic acid (TDG1) and 3-(trifluoromethyl)-5-nitropyridin-2-ol (L1) at 100 °C (ii) sources proved Pd(OAc)₂ to be the optimal catalyst, while Pd(TFA)₂, PdCl₂ and PdBr₂ provided only moderate yields (entries 10–12). Notably, a significantly lower yield was observed in the absence of the 2-pyridone ligand, and no desired product was isolated altogether in the absence of the TDG (entries 13 and 14). The incorporation of 15 mol% Pd catalyst was deemed necessary after only 55% yield of 3a was obtained when 10 mol% loading of Pd(OAc)₂ was instead used (entry 15).Optimization of reaction conditions^a

Entry	Pd source	L (mol%)	TDG1 (mol%)	Solvent (v/v, mL)	Yield (%)
1	Pd(OAc)2	L1 (30)	TDG1 (40)	HFIP	30
2	Pd(OAc)2	L1 (30)	TDG1 (40)	AcOH	<5
3	Pd(OAc)2	L1 (30)	TDG1 (40)	HFIP/AcOH (1 : 1)	28
4	Pd(OAc)2	L1 (30)	TDG1 (40)	HFIP/AcOH (9 : 1)	47
5	Pd(OAc)2	L1 (30)	TDG1 (40)	HFIP/AcOH (1 : 9)	<5
6	Pd(OAc)2	L1 (30)	TDG1 (60)	HFIP/AcOH (9 : 1)	50
7	Pd(OAc)2	L1 (30)	TDG1 (80)	HFIP/AcOH (9 : 1)	25
8	Pd(OAc)2	L1 (60)	TDG1 (60)	HFIP/AcOH (9 : 1)	70(68)b
9	Pd(OAc)2	L1 (75)	TDG1 (60)	HFIP/AcOH (9 : 1)	51
10	Pd(TFA)2	L1 (60)	TDG1 (60)	HFIP/AcOH (9 : 1)	60
11	PdCl2	L1 (60)	TDG1 (60)	HFIP/AcOH (9 : 1)	52
12	PdBr2	L1 (60)	TDG1 (60)	HFIP/AcOH (9 : 1)	54
13	Pd(OAc)2	—	TDG1 (60)	HFIP/AcOH (9 : 1)	9
14	Pd(OAc)2	L1 (60)	—	HFIP/AcOH (9 : 1)	0
15c	Pd(OAc)2	L1 (60)	TDG1 (60)	HFIP/AcOH (9 : 1)	55

Open in a separate window^aReaction conditions: 1a (0.2 mmol), 2a (0.4 mmol), Pd source (15 mol%), AgTFA (0.3 mmol), L1, TDG1, solvent (2.0 mL), 100 °C, 12 h. Yields are based on 1a, determined by ¹H-NMR using dibromomethane as an internal standard.^bIsolated yield.^cPd(OAc)₂ (10 mol%).To advance our optimization of the reaction conditions, a variety of 2-pyridones and TDGs were tested (Scheme 2). Originally, pyridine-2(1H)-one (L2) was examined as the external ligand, but it only yielded the product (3a) in 7% NMR yield. Similarly, other mono- and di-substituted 2-pyridone ligands (L3–L10) also produced low yields, fixating L1 as the optimal external ligand. Next, various α- and β-amino acids (TDG1–10) were evaluated, yet TDG1 persisted as the optimal transient directing group. These amino acid screening results also suggest that a [5,6]-bicyclic palladium species is likely the key intermediate in this protocol since only β-amino acids were found to provide appreciable yields, whereas α-amino acids failed to yield more than trace amounts of the product. The supremacy of TDG1 when compared to other β-amino acids is presumably due to the Thorpe–Ingold effect that perhaps helps facilitate the C–H bond cleavage and stabilize the [5,6]-bicyclic intermediate further.Open in a separate windowScheme 2Optimization of 2-pyridone ligands and transient directing groups.With the optimized reaction conditions in hand, substrate scope study of primary aliphatic aldehydes was subsequently carried out (Scheme 3). A variety of linear primary aliphatic aldehydes bearing different chain lengths provided the corresponding products 3a–e in good yields. Notably, relatively sterically hindered methylene C–H bonds were also functionalized effectively (3f and 3g). Additionally, 4-phenylbutanal gave rise to the desired product 3h in a highly site-selective manner, suggesting that functionalization of the methylene β-C–H bond is predominantly favored over the more labile benzylic C–H bond. It is noteworthy that the amide group was also well-tolerated and the desired product 3j was isolated in 60% yield. As expected, with n-propanal as the substrate, β-mono- (3k1) and β,β-disubstituted products (3k2) were isolated in 22% and 21% yields respectively. However, in the absence of the key external 2-pyridone ligand, β-monosubstituted product (3k1) was obtained exclusively, albeit with a low yield, indicating preference for functionalizing the β-C(sp³)–H bond of the methyl group over the benzylic methylene group.Open in a separate windowScheme 3Scope of primary aliphatic aldehydes. Reaction conditions: 1 (0.2 mmol), 2a (0.4 mmol), Pd(OAc)₂ (15 mol%), AgTFA (0.3 mmol), L1 (60 mol%), TDG1 (60 mol%), HFIP (1.8 mL), HOAc (0.2 mL), 100 °C, 12 h. Isolated yields. ^aL1 (60 mol%) was absent and yields are given in parentheses.Next, substrate scope study on aryl iodides was surveyed (Scheme 4). Iodobenzenes bearing either an electron-donating or electron-withdrawing group at the para-, meta-, or ortho-position were all found compatible with our catalytic system (3l–3ah). Surprisingly, ortho-methyl- and fluoro-substituted aryl iodides afforded the products in only trace amounts. However, aryl iodide with ortho-methoxy group provided the desired product 3ac in a moderate yield. Notably, a distinctive electronic effect pattern was not observed in the process. It should be mentioned that arylated products bearing halogen, ester, and cyano groups could be readily converted to other molecules, which significantly improves the synthetic applicability of the process. Delightfully, aryl iodide-containing natural products like ketoprofen, fenchol and menthol were proven compatible, supplying the corresponding products in moderate yields. Unfortunately, (hetero)aryl iodides including 2-iodopyridine, 3-iodopyridine, 4-iodopyridine and 4-iodo-2-chloropyridine failed to produce the corresponding products. Although our protocol provides a novel and direct pathway to construct β-arylated primary aliphatic aldehydes, the yields of most examples are modest. The leading reasons for this compromise are the following: (1) aliphatic aldehydes are easily decomposed or oxidized to acids; (2) some of the prepared β-arylated aldehyde products may be further transformed into the corresponding α,β-unsaturated aldehydes.Open in a separate windowScheme 4Scope of aryl iodides. Reaction conditions: 1a (0.2 mmol), 2 (0.4 mmol), Pd(OAc)₂ (15 mol%), AgTFA (0.3 mmol), L1 (60 mol%), TDG1 (60 mol%), HFIP (1.8 mL), HOAc (0.2 mL), 100 °C, 12 h. Isolated yields.Density functional theory (DFT) calculations were performed to help investigate the reaction mechanism and to elucidate the role of the ligand in improving the reactivity (Fig. 2). The condensation of the aliphatic aldehyde 1a with the TDG to form imine-1a was found thermodynamically neutral (ΔG° = −0.1 kcal mol⁻¹). As a result, it was permissible to use imine-1a directly in the calculations. According to the calculations results, the precatalyst [Pd(OAc)₂]₃, a trimeric complex, initially experiences dissociation and ligand metathesis with imine-1a to generate the Pd(ii) intermediate IM1, which is thermodynamically favorable by 21.9 kcal mol⁻¹. Consequently, the deprotonated imine-1a couples to the bidentate ligand to form the stable six-membered chelate complex IM1. Therefore, IM1 is indeed the catalyst resting state and serves as the zero point to the energy profile. We have identified two competitive pathways for the Pd(ii)-catalyzed C–H activation starting from IM1, one of which incorporates L1 and another which does not. On the one hand, an acetate ligand substitutes one imine-1a chelator in IM1 to facilitate the subsequent C–H activation leading to IM2, which undergoes C(sp³)–H activation through concerted metalation-deprotonation (CMD) viaTS1 (ΔG^‡ = 37.4 kcal mol⁻¹). However, this kinetic barrier is thought to be too high to account for the catalytic activity at 100 °C. On the other hand, the chelate imine-1a could be replaced by two N-coordinated ligands (L1) leading to the Pd(ii) complex IM3. This process is endergonic by 6.4 kcal mol⁻¹. To allow the ensuing C–H activation, IM3 dissociates one ligand (L1) producing the active species IM4, which undergoes TS2 to cleave the β-C(sp³)–H bond and form the [5,6]-bicyclic Pd(ii) intermediate IM5. Although this step features an energy barrier of 31.2 kcal mol⁻¹, it is thought to be feasible under the experimental conditions (100 °C). Possessing similar coordination ability to that of pyridine, the ligand (L1) effectively stabilizes the Pd(ii) center in the C–H activation process, indicating that this step most likely involves a manageable kinetic barrier. This result explicates the origin of the ligand-enabled reactivity (TS2vs.TS1). Additionally, we considered the γ-C(sp³)–H activation pathway viaTS2′ which was found to have a barrier of 35.5 kcal mol⁻¹. The higher energy barrier of TS2′ compared to that of TS2 is attributed to its larger ring strain in the [6,6]-bicyclic Pd(ii) transition state, which reveals the motive for the site-selectivity. Reverting back to the supposed pathway, upon the formation of the bicyclic intermediate IM5, it undergoes ligand/substrate replacement to afford intermediate IM6, at which the Ar–I coordinates to the Pd(ii) center to enable oxidative addition viaTS3 (ΔG^‡ = 27.4 kcal mol⁻¹) leading to the five-coordinate Pd(iv) complex IM7. Undergoing direct C–C reductive elimination in IM7 would entail a barrier of 29.6 kcal mol⁻¹ (TS4). Alternatively, iodine abstraction by the silver(i) salt in IM7 is thermodynamically favorable and irreversible, yielding the Pd(iv) intermediate IM8 coordinated to a TFA ligand. Subsequently, C–C reductive coupling viaTS5 generates the Pd(ii) complex IM9 and concludes the arylation process. This step was found both kinetically facile (6.1 kcal mol⁻¹) and thermodynamically favorable (30.7 kcal mol⁻¹). Finally, IM9 reacts with imine-1avia metathesis to regenerate the palladium catalyst IM1 and release imine-3a in a highly exergonic step (21.0 kcal mol⁻¹). Ultimately, imine-3a undergoes hydrolysis to yield the aldehyde product 3a and to release the TDG.Open in a separate windowFig. 2Free energy profiles for the ligand-promoted Pd(ii)-catalyzed site-selective C–H activation and C–C bond formation, alongside the optimized structures of the C–H activation transition states TS1 and TS2 (selected bond distances are labelled in Å). Energies are relative to the complex IM1 and are mass-balanced.     

Correction: Expanding medicinal chemistry into 3D space: metallofragments as 3D scaffolds for fragment-based drug discovery

Correction for ‘Expanding medicinal chemistry into 3D space: metallofragments as 3D scaffolds for fragment-based drug discovery’ by Christine N. Morrison et al., Chem. Sci., 2020, 11, 1216–1225, https://doi.org/10.1039/C9SC05586J.

The authors regret that in the original article, inhibitory values reported for some metallofragments were incorrect. Unfortunately, DMSO stock solutions of reportedly active ferrocene-based metallofragments were found to decompose in the presence of light, which resulted in inaccurate inhibition values. The authors maintain that the core conclusions of the paper are accurate and the utility of three-dimensional metal complexes for fragment-based drug discovery has merit.In the original article, ‘class A’ metallofragments are comprised of ferrocene derivatives (Fig. 1). Some of these ferrocene fragments (specifically those containing carbonyl groups) are reported as broadly inhibiting several protein targets. It was noted in our original report that the ferrocene scaffold was likely promiscuous due to its lipophilicity and potential redox activity, but that it might still serve as a useful metallofragment for fragment-based drug discovery (FBDD) campaigns. However, re-evaluation of these compounds against the influenza endonuclease (PA_N) failed to reproduce our original inhibition results for the class A metallofragments using freshly prepared stocks, indicating a problem with the materials used in the original study.Open in a separate windowFig. 1Chemical structures of class A metallofragments.Several compounds from class A were originally reported as having near complete (100%) inhibition against PA_N endonuclease at an inhibitor concentration of 200 μM (​and2).2). However, when re-evaluated under identical conditions, using freshly prepared DMSO stock solutions, inhibition was only observed with one fragment of this class (A22, Fig. 1), with the previously reported highly active fragments (A4, A7–A21, CompoundA1A2A3A4A5A7A8A9A10A11Reported12 ± 6<1<145 ± 148 ± 7103 ± 5103 ± 453 ± 546 ± 790 ± 5Corrected3 ± 10n.d.18 ± 36 ± 321 ± 59 ± 310 ± 54 ± 216 ± 410 ± 7Open in a separate window^an.d. = not determined.

Polycyclic heteroaromatics via hydrazine-catalyzed ring-closing carbonyl–olefin metathesis

The use of hydrazine-catalyzed ring-closing carbonyl–olefin metathesis (RCCOM) to synthesize polycyclic heteroaromatic (PHA) compounds is described. In particular, substrates bearing Lewis basic functionalities such as pyridine rings and amines, which strongly inhibit acid catalyzed RCCOM reactions, are shown to be compatible with this reaction. Using 5 mol% catalyst loadings, a variety of PHA structures can be synthesized from biaryl alkenyl aldehydes, which themselves are readily prepared by cross-coupling.

Hydrazine catalysis enables the ring-closing carbonyl–olefin metathesis (RCCOM) to form polycyclic heteroaromatics, especially those with basic functionality.

Polycyclic heteroaromatic (PHA) structures comprise the core framework of many valuable compounds with a diverse range of applications (Fig. 1A).¹ For example, polycyclic azines (e.g. quinolines) are embedded in many alkaloid natural products, including diplamine² and eupolauramine³ to name just a few. These types of structures are also of interest for their biological activity, such as with the inhibitor of the Src-SH3 protein–protein interaction shown in Fig. 1A.⁴ Many nitrogenous PHAs are also useful as ligands for transition metal catalysis, as exemplified by the widely used ligand 1,10-phenanthroline.⁵ Meanwhile, chalcogenoarenes⁶ such as dinaphthofuran⁷ and benzodithiophene⁸ have attracted high interest for both their medicinal properties⁹ and especially for their potential use as organic light-emitting diodes (OLEDs), organic photovoltaics (OPVs), and organic field-effect transistors (OFETs).¹⁰ These and numerous other examples have inspired the development of a wide variety of strategies to construct PHAs.^1,11–14 Although these approaches are as varied as the structures they target, the wide range of molecular configurations within PHA chemical space and the challenges inherent in exerting control over heteroatom position and global structure make novel syntheses of these structures a topic of continuing interest.Open in a separate windowFig. 1(A) Examples of PHAs. (B) RCCOM strategy for PHA synthesis. (C) Lewis base inhibition for Lewis acid vs. hydrazine catalyzed RCCOM. (D) Hydrazine-catalyzed RCCOM for PHA synthesis.One potentially advantageous strategy for PHA synthesis is the use of ring-closing carbonyl–olefin metathesis¹⁵ (RCCOM) to forge one of the PHA rings, starting from a suitably disposed alkenyl aldehyde precursor 2 that can be easily assembled by cross-coupling (Fig. 1B). In related work, the application of RCCOM to form polycyclic aromatic hydrocarbons (PAHs) was reported by Schindler in 2017.¹⁶ In this case, 5 mol% FeCl₃ catalyzed the metathesis of substrates to form phenanthrenes and related compounds in high yields at room temperature. This method was highly attractive for its efficiency, its use of an earth-abundant metal catalyst, and the production of benign acetone as the only by-product. Nevertheless, one obvious drawback to the use of Lewis acid activation is that the presence of any functionality that is significantly more Lewis basic than the carbonyl group can be expected to strongly inhibit these reactions (Fig. 1C). Such a limitation thus renders this method incompatible with a wide swath of complex molecules, especially PHAs comprised of azine rings. This logic argues for a mechanistically orthogonal RCCOM approach that allows for the synthesis of PHA products with a broader range of ring systems and functional groups.We have developed an alternative approach to catalytic carbonyl–olefin metathesis that makes use of the condensation of 1,2-dialkylhydrazines 5 with aldehydes to form hydrazonium ions 6 as the key catalyst–substrate association step.^17–19 This interaction has a much broader chemoorthogonality profile than Lewis acid–base interactions and should thus be much less prone to substrate inhibition than acid-catalyzed approaches. In this Communication, we demonstrate that hydrazine-catalyzed RCCOM enables the rapid assembly of PHAs bearing basic functionality (Fig. 1D).For our optimization studies, we chose biaryl pyridine aldehyde 7 as the substrate (20 salt 11 was also productive (entry 2), albeit somewhat less so. Notably, iron(iii) chloride generated no conversion at either ambient or elevated temperatures (entries 3 and 4). Trifluoroacetic acid (TFA) was similarly ineffective (entry 5). Meanwhile, a screen of various solvents revealed that, while the transformation could occur in a range of media (entries 6–9), THF was optimal. Finally, by raising the temperature to 90 °C (entry 10) or 100 °C (entry 11), up to 96% NMR yield (85% isolated yield) of adduct 8 could be obtained in the same time period.Optimization studies^a

Non-directed Pd-catalysed electrooxidative olefination of arenes

The Fujiwara–Moritani reaction is a powerful tool for the olefination of arenes by Pd-catalysed C–H activation. However, the need for superstoichiometric amounts of toxic chemical oxidants makes the reaction unattractive from an environmental and atom-economical view. Herein, we report the first non-directed and regioselective olefination of simple arenes via an electrooxidative Fujiwara–Moritani reaction. The versatility of this operator-friendly approach was demonstrated by a broad substrate scope which includes arenes, heteroarenes and a variety of olefins. Electroanalytical studies suggest the involvement of a Pd(ii)/Pd(iv) catalytic cycle via a Pd(iii) intermediate.

The Fujiwara–Moritani reaction using electric current is a powerful tool for the olefination of arenes by Pd-catalysed C–H activation.

Transition metal-catalysed C–H functionalisation reactions have increasingly gained importance over the last few decades since they allow direct and rapid installation of functionality. Regardless of the undeniable synthetic value of such transformations, the need for superstoichiometric quantities of expensive and hazardous oxidants (e.g., silver and copper salts) remains a major drawback from a sustainable chemistry perspective.^1,2 Additionally, chemical oxidants often lead to the formation of by-products, hindering purification and decreasing atom economy. Nevertheless, very few reports were also reported in the literature wherein mild oxidant such as molecular oxygen can also serve as the oxidising agent.^2j To make chemical processes and transformations intrinsically sustainable, organic chemists re-discovered synthetic electrochemistry as an environmentally friendly approach.^3–6 In the domain of synthetic electrochemistry, the Lei group achieved a significant milestone and installed C–C bonds through a different cross-coupling strategy.^1k,2f–h Electroorganic synthesis utilizes electric current to realize redox processes and thereby avoids the use of dangerous, expensive, and polluting chemical oxidising or reducing agents. Precise control of electrochemical reaction parameters often leads to commendable reactivity and chemoselectivity and hence to an improved atom economy. In addition, electrochemical processes fulfil the expectations of sustainability since electricity can be generated from renewable energy sources, such as wind, sunlight or biomass. Recent efforts in the field of electrochemical C–H activation resulted in significant progress towards efficient C–C and C–heteroatom bond formations.^7–10 Hence, the utilization of electric current as an alternative oxidant in Pd-catalysed C–H functionalisations is emerging as an attractive alternative to stoichiometric reagents.^11–13The Fujiwara–Moritani reaction is one of the earliest known examples of Pd-catalysed oxidative C–H functionalisations for C–C bond formation.¹⁴ This extraordinary C(sp²)-H alkenylation reaction avoids the use of prefunctionalised starting materials; however, it suffers from the drawbacks of regioselectivity, reactivity and use of excess arenes.¹⁵ Since its development, a number of modified strategies have been reported by different research groups to address the issue of reactivity and selectivity.^16–21 In recent times, the ligand assisted oxidative C–H alkenylation of arenes without directing substituents has been established as one of the major strategies to overcome the reactivity issue and to elaborate the substrate scope.However, regioselectivity for most of the sterically and electronically unbiased arenes is still not up to the mark. The most recent studies on the non-directed oxidative C–H olefination of arenes were reported independently by Yu and van Gemmeren (Scheme 1). The Yu group employed electron-deficient 2-pyridone as an X-type ligand for the olefination of both electron-rich and electron-poor arenes including heteroarenes as the limiting reagent (Scheme 1a).¹⁸ The pyridone ligand improves the selectivity in a non-directed approach as compared to the directed C–H olefination reaction by enhancing the influence of steric effects. On the other hand, the van Gemmeren group utilizes two complementary ligands N-Ac–Gly–OH and a 6-methylpyridine derivative in a 1 : 1 ratio to accomplish the non-directed olefination reaction of arenes (Scheme 1b).²⁰ Despite the indisputable advances made by these research groups in the area of non-directed oxidative C–H olefination of arenes, the use of superstoichiometric amounts of toxic and waste-generating oxidants (Ag salts) deciphers into a strong call for an environmentally responsive and atom-economic protocol. To address these shortcomings, we recently introduced Pd-photoredox catalysed olefination of non-directed arenes with excellent site selectivity under oxidant free conditions.²¹Open in a separate windowScheme 1Recent approaches to sustainable C–H alkenylation reactions.In 2007, Jutand reported the directing group assisted Pd-electracatalysed ortho-olefination of acetyl protected aniline in a divided cell by utilizing catalytic amounts of benzoquinone as a redox mediator (Scheme 1c).^22a A Rh-catalysed ortho-C–H olefination of benzamide was developed through an electrooxidative pathway by the Ackermann group (Scheme 1d).^22b Simple arenes that bear no directing groups are cheap, easily available and very desirable starting materials. However, the use of such arenes is significantly more challenging for selective functionalisation as transformations often result in the formation of complex product mixtures. With no report of an electrooxidative Pd-catalysed C(sp²)-H alkenylation of simple arenes present, we wish to present such a variant of the Fujiwara–Moritani reaction (Scheme 1e). The developed method proceeds through a non-directed pathway and is controlled by stereoelectronic factors. This protocol does not require additional chemical oxidizing agents and is executed using an operator-friendly undivided cell setup.To start our study, naphthalene was chosen as a challenging substrate because of its ability to form α- and β-products. We examined various reaction conditions for the desired Pd-catalysed electrooxidative C–H alkenylation in a simple undivided cell setup (†) with n-butyl acrylate as the coupling partner. After rigorous optimisation, we found that naphthalene reacts with n-butyl acrylate in dichloroethane (DCE) in the presence of Pd(OAc)₂ (10 mol%), ligand L1 (20 mol%), and the electrolyte tetra-n-butylammonium hexafluorophosphate (TBAPF₆, 0.5 equiv.) while employing a graphite felt anode and a platinum cathode maintaining constant current electrolytic conditions (j = 2.5 mA cm⁻², EntryAlteration from standard conditionsYield of 1^b (%)Selectivity (β : α)1None70>25 : 12Co(OAc)₂·4H₂O instead of Pd(OAc)₂91 : 13[Ru(p-cymene)Cl₂]₂ instead of Pd(OAc)₂NR4Pd(OAc)₂·(5 mol%)51>25 : 15Pd(OAc)₂·(20 mol%)71>25 : 16L2 instead of L1458 : 17L3 instead of L15920 : 18L4 instead of L1195 : 19L5 instead of L181 : 110Benzoquinone (10 mol%)68>25 : 111PivOH (1.0 equiv.)6120 : 112Ni foam instead of Pt64>25 : 113GF instead of Pt4915 : 114Steel instead of Pt3113 : 1156 mA cm⁻² instead of 2.5 mA cm⁻²2711 : 11624 h reaction time4720 : 11712 h reaction time5621 : 118No electricityNR—19No Pd(OAc)₂NR— Open in a separate window^aStandard reaction conditions: undivided cell, GF anode, Pt cathode, j = 2.5 mA cm⁻², naphthalene (0.2 mmol), n-butyl acrylate (0.5 mmol), Pd(OAc)₂ (10 mol%), L1 (20 mol%), TBAPF₆ (0.5 equiv.), DCE (3 mL), 15 h, under air.^bYield determined by ¹H-NMR of crude reaction mixture. NR = no reaction; TBAPF₆ = tetra-n-butylammonium hexafluorophosphate. GF = graphite felt. Surface area of electrodes dipped in solution = 0.7 cm × 0.7 cm, current = 1.225 mA and current density = 2.5 mA cm⁻² (electrochemical surface area = 1.23 cm²).Notably, in the present transformation the ligand has a major influence on the reactivity and selectivity aspects (see the ESI, Table S4^†). After studying a series of 2-pyridone, pyridine and amino acid-based ligands L2–L5 it was found that L1 is the optimal ligand since it provided superior yield and selectivity (entries 6–9). Addition of catalytic amounts of p-benzoquinone as a redox mediator (entry 10) or pivalic acid as an additive (entry 11, Scheme 2). Following the olefination of naphthalene (68%, >25 : 1 β : α selectivity), 1,2,3,4-tetrahydronaphthalene was successfully reacted (52%, 11 : 1 β : α-selectivity). Next, we applied our standard reaction conditions to benzene and found them not to be equally effective as only 25% of the olefinated product 3 was obtained. As a result, further optimizations of electric current density and solvent were carried out to enhance the yield (see the ESI, Table S9^†). To our satisfaction, the yield of product 3 increased to 63% when the electrolysis was carried out with an electric current density of j = 1.5 mA cm⁻² and in a solvent mixture of DCE/HFIP (5 : 1). These modified reaction conditions were applied to the electrosynthesis of all other olefinated products 4–26 (Scheme 2). The olefination of 1,3,5-trimethoxybenzene and mesitylene with n-butyl acrylate proceeded smoothly under the revised reaction conditions to afford products 4–5 in up to 65% yield. The regioselectivity issue was more prominent for arenes bearing two or more electronically similar C–H bonds (e.g., electron-rich arenes: ortho vs. para). Dimethoxy benzene gives β-selective olefinated product 6 (β : α; 7 : 1). While toluene was converted with para-selectivity (7 : 1) to 7, phenol afforded olefinated product 8 with ortho-selectivity (o : others; 9 : 1, Scheme 2). On the other hand, subjecting TBDMS (tert-butyldimethylsilyl) protected phenol to the established protocol furnished 9 with 8 : 1 para-selectivity (Scheme 2). The TBDPS (tert-butyldiphenylsilyl) protected phenol afforded exclusively the para-olefinated product 10 which might be due to the steric repulsion caused by the bulky protecting group. Conversion of 2,6-diiso-propylphenol provided olefinated product 11 as a single para-olefinated isomer with 67% yield. Anisole and ethoxybenzene both reacted smoothly to produce 12 (72%, 15 : 1) and 13 (70%, 10 : 1) with ortho-selectivity (Scheme 2). The compatibility of the present transformation was further showcased by the olefination of N,N-dimethyl aniline in 70% yield (14) and 8 : 1 ortho-selectivity. Similarly, methyl ferrocene carboxylate and biologically active caffeine reacted smoothly with n-butyl acrylate to produce olefinated products 15 and 16 in good yields (Scheme 2). Moderately electron-withdrawing arenes such as a phenyl acetic acid derivative (17, 51%, o : others = 7 : 1), a homoveratric acid derivative (18, 48%, o : others = 15 : 1) or 4-methoxy acetophenone (19, 59%, m : others = 7 : 1) gave the corresponding products in satisfactory yields. The coupling of unsubstituted thiophene and furan with n-butyl acrylate afforded the olefinated products 20 and 21 (64% and 68%) with synthetically useful C2-selectivity, respectively (C2 : others; 18 : 1 and C2 : others; 19 : 1, Scheme 2). In contrast, thiophenes bearing a substituent at the C2 position such as 2-phenylthiophene and 1-(4-(thien-2-yl)phenyl)ethan-1-one reacted with high C5-selectivity (>20 : 1) to afford the arylated α,β-unsaturated esters 22 and 23 (76% and 73% yield). Conversion of 2-(2-nitrophenyl)thiophene delivered the desired product 24 in 64% yield with exclusive C5-selectivity. A C3-substituted thiophene also reacted with the acrylate to afford 25 in 72% yield (C5 : others; 6 : 1 selectivity). Heteroarenes bearing electron-withdrawing substituents such as 2-acetyl thiophene (26) afforded the C5-olefinated product in moderate yield and selectivity (60%, C5 : others = 8 : 1). However, aromatic rings bearing strong electron-withdrawing groups (–NO₂, –CHO, –CF₃, –F etc.) are not compatible under our present reaction conditions (see details in the ESI, Section 4.3^†).Open in a separate windowScheme 2Evaluation of simple arenes and heteroarenes in the electrochemical olefination.^a Reaction conditions: undivided cell, GF anode, Pt cathode, j = 2.5 mA cm⁻² or j = 1.5 mA cm⁻², corresponding arenes or heteroarenes (0.2 mmol), n-butyl acrylate (0.5 mmol), Pd(OAc)₂ (10 mol%), L1 (20 mol%), TBAPF₆ (0.5 equiv.), DCE (3 mL) or 5 : 1 ration of dichloroethane (DCE) and 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP), 15 h, under air. ^bYields of isolated products are reported.Next, we investigated the applicability of other olefins by reacting them with simple arenes (Scheme 3). In addition to other acrylates (methyl 27, ethyl 28 and tert-butyl 29), acrylic acid was successfully converted with naphthalene to its arylated product 30. Moderate yields (54–60%) and moderate to high β : α selectivities (up to >25 : 1) were obtained for all reactions. Coupling of methyl acrylate with benzene under adjusted electrochemical conditions (j = 1.5 mA cm²; DCE/HFIP mixtures) gave 62% of olefinated product 31. Other activated olefins such as methyl vinyl sulfone, and acrylonitrile were also amenable to the present olefination protocol. Subjecting these substrates in combination with different arenes to our protocol led to a variety of arylated products 32–35 in good yields and regioselectivities. α,β-Unsaturated ester derivatives of bioactive molecules such as δ-tocopherol and cholesterol were efficiently reacted with naphthalene to the olefinated products 36–37 in moderate yields. To further elaborate the scope of present protocol, un-activated olefins such as aliphatic olefins and styrene derivatives were tested. However, none of them afford olefinated products under our reaction conditions (see details in the ESI, Section 4.3^†). To monitor the scalability of the present transformation, two reactions were performed with the model reaction at scales of 0.504 g (46%, β : α = 7 : 1) and 1.08 g (41%, β : α = 7 : 1; see ESISection 4.2^†).Open in a separate windowScheme 3Evaluation of other α,β-unsaturated systems in the electrochemical olefination of arenes. ^aReaction conditions: undivided cell, GF anode, Pt cathode, j = 2.5 mA cm⁻² or j = 1.5 mA cm⁻², corresponding arenes or heteroarenes (0.2 mmol), activated olefins (0.5 mmol), Pd(OAc)₂ (10 mol%), L1 (20 mol%), TBAPF₆ (0.5 equiv.), DCE (3 mL) or 5 : 1 ratio of dichloroethane (DCE) and 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP), 15 h, under air. ^bYields of isolated products are reported.To gain insights into the catalytic mode of action, electrochemical and spectroelectrochemical experiments were performed. Cyclic voltammetry (CV) of Pd(OAc)₂ in DCE revealed two oxidation waves at +1.42 V vs. NHE (Normal Hydrogen Electrode) and at +2.47 V vs. NHE (Fig. 1a) which might refer to the redox conversion of Pd(ii/iii) and Pd(iii/iv).²³Fig. 1b shows the CVs of naphthalene (substrate), ligand L1, n-butyl acrylate, and Pd(OAc)₂. In comparison to the Pd(ii/iii) redox pair, a significantly higher oxidation potential (+2.16 V vs. NHE) was observed for naphthalene, which suggests that substrate activation is potentially induced by a Pd species with an oxidation state greater than +II (Fig. 1b). The CVs of other substrates followed the same pattern (see the ESI, Fig. S2^†). According to an electrochemical study on approximate ranges of standard redox potentials for Pd intermediates in catalytic reactions, the oxidation of Pd(ii) to Pd(iv) is usually observed in the range of +1.00–2.00 V (vs. Fc/Fc⁺ = ferrocene) or 1.63–2.63 V (vs. NHE).²³ The CV profile of Pd(OAc)₂ in the negative scan revealed two reduction waves at −0.23 V and at −1.06 V vs. NHE (Fig. S6^†) which might refer to the redox conversion of Pd(ii/i) and Pd(i/0). Taking these results into account, involvement of a Pd(ii/iv) catalytic cycle during the present transformation appears to be likely as the negative scan rules out a Pd(ii/0) cycle.^23d,eOpen in a separate windowFig. 1(a) Cyclic voltammograms of Pd(OAc)₂ and L1-Pd(OAc)₂ (1 mM, 100 mV s⁻¹ scan rate, glassy carbon, potential vs. NHE, 0.1 M TBAPF₆ in DCE); (b) cyclic voltammogram of reactants (1 mM, 100 mV s⁻¹ scan rate, glassy carbon, potential vs. NHE, 0.1 M TBAPF₆ in DCE); (c) in situ UV-Vis spectroelectrochemical spectra of the reaction mixture during bulk electrolysis at +2.61 V vs. NHE; (d) in situ UV-Vis spectroelectrochemical spectra of the Pd-ligand complex during bulk electrolysis at +2.61 V vs. NHE.In order to obtain further evidence for this hypothesis, we examined the reaction mixture at a constant potential of +2.61 V (vs. NHE) spectroelectrochemically (SEC) to check any changes in optical features during the reaction. This in situ UV-visible analysis of the reaction mixture revealed the gradual decrease of an absorption band at 379 nm and a new peak (∼350 nm) appeared over time (Fig. 1c). Similar behaviour was observed for the Pd-ligand complex as a blue shift of optical bands was found from 368 nm to 352 nm at the same potential of +2.61 V (vs. NHE, Fig. 1d). The differences in the observed UV-Vis peak positions are presumably due to a change in the geometry of the Pd-complex upon oxidation in the analysed reaction mixtures.To further consolidate this hypothesis, the same SEC experiment was repeated with only Pd(OAc)₂ which showed an absorption peak at 404 nm (Fig. S3^†). Electrolysis of Pd(OAc)₂ at +2.61 V (vs. NHE) also resulted in a blue shift with a new peak appearing at almost the same wavelength of 349 nm (Fig. S4^†). All these results led us to postulate that the new peak was associated with a change in the oxidation state of the Pd(ii) center. Moreover understand the nature of intermediates involved in the catalytic cycle, a series of electron paramagnetic resonance (EPR) experiments of the reaction mixture were conducted at different time intervals employing optimised reaction conditions. The EPR spectra (273 K) after 1 h showed a strong peak at g = 2.005 which was presumably due to the formation of an organic radical (Fig. 2a), however no naphthalene homo-coupled product was detected after different time intervals or under different conditions. At longer time intervals (4 h and 7 h), weak peaks at g_x = 2.139, g_y = 2.081 and g_z = 2.055 arose due to the asymmetry of the electronic distribution. The appearance of rhombic signals suggested the formation of a Pd(iii) intermediate having a d⁷ center (Fig. 2a).²⁴ An enlarged version of the spectra for Pd(iii) after 7 h is shown with simulated data in Fig. 2b. Time-dependent EPR spectra highlight that the build-up of Pd(iii) was concomitant with the decreased formation of an organic radical (Pd^III–R to Pd^IIR^.) as the corresponding peak diminished. This implied that the catalytically active Pd(iii) species got accumulated as the reaction approached towards completion. Furthermore, the EPR data in the absence of n-butyl acrylate (after 2 h) also revealed a very strong peak at g = 2.005; hence the formation of a radical species from the olefin was ruled out (Fig. S5^†).Open in a separate windowFig. 2(a) EPR spectrum of the reaction mixture under the standard reaction conditions at different time intervals (273 K); (b) enlarged EPR spectra of Pd(iii) after 7 h of experiment at 273 K (experimental vs. simulated).Additionally, radical quenching experiments with TEMPO did not show any effects under the standard reaction conditions. Furthermore, electrochemical arene oxidation to generate organic radicals has been well reported in the literature.^5f All these control experiments suggest that a phenoxy radical from L1 (C′) might be formed from intermediate C (Scheme 4).Open in a separate windowScheme 4Proposed catalytic cycle for the electrooxidative olefination of arenes.All of the performed experiments give a strong indication that a Pd(ii)/Pd(iv) cycle is involved in this electrochemical variant of the Fujiwara–Moritani reaction. Also, a palladium complex Pd^II(L1)₄ was synthesised and characterised by X-ray crystallography (Fig. 3). This Pd^II(L1)₄ complex was found to be a competent intermediate for the Pd-catalysed electrooxidative olefination of arenes.Open in a separate windowFig. 3Single X-ray crystal structure of Pd-complex [Pd(L1)₄].²⁵Based on these results and literature precedence,²³ a plausible Pd(ii/iv)-catalytic cycle is proposed for the electro-oxidative olefination of simple arenes (Scheme 4). The catalytic cycle starts with the anodic oxidation of the Pd(ii) catalyst A to form a Pd(iii) intermediate B. Arene C (sp²)–H bond activation delivers the organopalladium complex C which is converted to the Pd(iv) species D by anodic oxidation. Next, olefin coordination to form E followed by migratory insertion results in the formation of another organopalladium intermediate F. Finally, β-hydride elimination followed by reduction of Pd furnishes the olefinated product 1 and the Pd(ii) catalyst A is regenerated.     

Direct synthesis of pentasubstituted pyrroles and hexasubstituted pyrrolines from propargyl sulfonylamides and allenamides

Multisubstituted pyrroles are important fragments that appear in many bioactive small molecule scaffolds. Efficient synthesis of multisubstituted pyrroles with different substituents from easily accessible starting materials is challenging. Herein, we describe a metal-free method for the preparation of pentasubstituted pyrroles and hexasubstituted pyrrolines with different substituents and a free amino group by a base-promoted cascade addition–cyclization of propargylamides or allenamides with trimethylsilyl cyanide. This method would complement previous methods and support expansion of the toolbox for the synthesis of valuable, but previously inaccessible, highly substituted pyrroles and pyrrolines. Mechanistic studies to elucidate the reaction pathway have been conducted.

This method is a toolbox for the synthesis of valuable, but previously inaccessible, highly substituted pyrroles and pyrrolines.

Pyrroles are molecules of great interest in a variety of compounds including pharmaceuticals, natural products and other materials. Pyrrole fragments for example are key motifs in bioactive natural molecules, forming the subunit of heme, chlorophyll and bile pigments, and are also found in many clinical drugs, including those in Fig. 1a.¹ Although many classical methods of pyrrole synthesis, including the Paal–Knorr condensation,² the Knorr reaction,³ the Hantzsch reaction,⁴ transition metal-catalyzed reactions,⁵ and multicomponent coupling reactions,⁶ have been developed over many years, the efficient synthesis of multisubstituted pyrroles is still challenging. In condensation syntheses of pyrroles, the major problems lie in the extended syntheses of complex precursors and limited substitution patterns that are allowed. Multicomponent reactions are superior when building pyrrole core structures with more substituents. Among these, the [2+2+1] cycloaddition reaction of alkynes and primary amines is attractive because of the readily available alkyne and amine substrates and the ability to construct fully substituted pyrroles.⁷ However, with the exception of some rare examples,⁸ most [2+2+1] cycloaddition reactions afford pyrroles with two or more identical substituents. The synthesis of multisubstituted pyrroles with all different substituents from simple starting materials therefore remains a major challenge.Open in a separate windowFig. 1Previous reports and this work on propargylamides transformation.Easily accessible propargylamides are classical, privileged building blocks broadly utilized for the synthesis of a large variety of heterocyclic molecules such as pyrroles, pyridines, thiazoles, oxazoles and other relevant organic frameworks.⁹ For example, Looper¹⁰et al. reported the synthesis of 2-aminoimidazoles from propargyl cyanamides and Eycken¹¹ reported a method starting from propargyl guanidines which undergo a 5-exo-dig heterocyclization as shown in Fig. 1b. Subsequently, Wan¹²et al. revealed the cyclization of N-alkenyl propargyl sulfonamides into pyrroles via sulfonyl migration. Inspired by these transformations and multi-substituted pyrrole synthesis, we report herein a direct synthesis of pentasubstituted pyrroles and hexasubstituted pyrrolines with all different substituents from propargyl sulfonylamides and allenamides.Previously, Zhu,¹³ Ji¹⁴ and Qiu^13b,15 reported efficient syntheses of 2-aminopyrroles from isocyanides. Ye¹⁶ and Huang¹⁷ independently developed gold-catalyzed syntheses of 2-amino-pentasubstituted pyrroles with ynamides. Despite the many advantages of these methods, they all afford protected amines, rather than free amines. The deprotection of these amines may cause problems in further transformations of the products. Our method delivers pyrroles with an unprotected free amino group and are often complementary to the previously well-developed classical methods.Initially, the cyclization reaction of N-(1,3-diphenylprop-2-yn-1-yl)-N-ethylbenzenesulfonamide (1a) with trimethylsilyl cyanide (TMSCN) was carried out with Ni(PPh₃)₂Cl₂ as a catalyst, a base (Cs₂CO₃) and DMF as a solvent. Different metal catalysts, such as Ni(PPh₃)₂Cl₂, Pd(OAc)₂, Cu(OAc)₂, and Co(OAc)₂ provided the desired product with similar yields ( EntryCat.BaseSolventYield1Ni(PPh₃)₂Cl₂Cs₂CO₃DMF67%2Pd(OAc)₂Cs₂CO₃DMF65%3Cu(OAc)₂Cs₂CO₃DMF65%4Co(OAc)₂Cs₂CO₃DMF63%5Cs₂CO₃DMF65%6KFDMFTrace7K₃PO₄DMFTrace8K₂CO₃DMF48%9KOHDMF52%10KO^tBuDMF46%11Et₃NDMFTrace12Cs₂CO₃CH₃CN18%13Cs₂CO₃DME23%14Cs₂CO₃TolueneTrace15Cs₂CO₃DCETrace16Cs₂CO₃DioxaneTraceOpen in a separate window^aReaction conditions: 1a (0.1 mmol, 1 equiv.), TMSCN (0.3 mmol, 3 equiv.), cat. (0 or 10 mol%), base (0.3 mmol, 3 equiv.) and solvent (1 mL), at 80 °C for 10 h; isolated yield.With the optimal reaction conditions in hand, we investigated the scope of this reaction. As shown in Fig. 2, the transformation tolerates a broad variety of substituted propargylamides (1). The R¹ group could be an aryl group containing either electron-donating groups or electron-withdrawing groups, and the corresponding products (2b–2h) were obtained in yields of 62–80%. The substituent R¹ could also be an alkyl group such as 1-hexyl in which case the reaction provided the corresponding pyrrole (2i) in 53% yield. Exploration of the R² substituent was also conducted. Electron-rich and electron-deficient substituents in the aromatic ring of R² gave the desired products (2j–2o) with yields of 70–81%. The product bearing a furyl group (2p) can be produced in 61% yield. However, when R² group is an aliphatic group, the reaction failed to provide the desired product. Substituent groups R³, such as benzyl (2q) or 3,4-dimethoxyphenylethyl (2r) were also compatible in the reaction, providing the corresponding products in moderate yields. Significantly, this method has the potential to produce core structures (for example 2s) similar to that in Atorvastatin. Interestingly, when alkynyl substituted isoquinolines (1t–1v) were used as the substrates, the reactions smoothly afforded fused pyrrolo[2,1-α]isoquinoline derivatives (2t–2v), members of a class of compounds that are found widely in marine alkaloids and exhibit anticancer and antiviral activity.¹⁸Open in a separate windowFig. 2Substrate scope of propargylamides. Reaction conditions: 1 (0.20 mmol, 1 equiv.), TMSCN (0.60 mmol, 3 equiv.), Cs₂CO₃ (0.60 mmol, 3 equiv.) and DMF (2 mL), at 80 °C for 10 h; isolated yield.Allenes are key intermediates in the synthesis of many complex molecules.¹⁹ As a subtype of allenes, allenamines are also useful as reaction intermediates.²⁰ Although the transformation of allenamides to multisubstituted pyrroles has not been previously recorded, this reaction probably goes through the allenamide intermediates which can be derived from propargyl sulfonamides under basic conditions. To verify this hypothesis, the trisubstituted allenamide (3) was synthesized and subjected to the standard reaction conditions. A pyrrole (2a) was isolated in 82% yield from this reaction (Fig. 3). This result confirmed our assumption and raised a new question: is it possible to build hexasubstituted pyrrolines from tetrasubstituted allenamides? A range of tetrasubstituted allenamides²¹ was tested under the standard reaction conditions, and the hexasubstituted pyrrolines were obtained as is shown in Fig. 4. The R¹ group could be an aryl substituent or an alkyl chain, and the corresponding products (5a–5e) were obtained with good yields. Various aryl groups with either electron-donating groups or electron-withdrawing groups in the aromatic ring of R² provided the desired products (5f–5k) in 62–83% yields. In addition, the difluoromethyl group can also be replaced by a phenyl group, and the reaction provided the corresponding product 5l in 82% yield. It is worth noting that these pyrroline products are not easily accessible from other methods.Open in a separate windowFig. 3Synthesis of substituted pyrroles from allenes.Open in a separate windowFig. 4Substrate scope of tetrasubstituted allenamides. Reaction conditions: 4 (0.10 mmol, 1 equiv.), TMSCN (0.30 mmol, 3 equiv.), K₂CO₃ (0.30 mmol, 3 equiv.) and DMF (1 mL), at 80 °C for 10 h, isolated yield.Some synthetic applications of this method are shown in Fig. 5. The amide is a naturally occurring and ubiquitous functional group. When using benzoyl chloride to protect the free amino group of the fully-substituted pyrrole (2a), a bis-dibenzoyl amide (6) was obtained in the presence of a base, triethylamine while the monobenzoyl protected amide (7) was obtained in the presence of pyridine as the base (Fig. 5a). This method also provides a straightforward approach to pyrrole fused lactam structures (Fig. 5b). For examples, a five-membered lactam and a six-membered lactam were generated separately in a one pot reaction, directly from, (8 and 10), respectively. Taking advantage of this method, an analogue of the drug Atorvastatin was synthesized in 5 steps (Fig. 5c), demonstrating the synthetic value of the reaction.Open in a separate windowFig. 5Synthetic applications.Mechanistic experiments were performed (Fig. 6) to explore the mechanism of the reaction. When 3 equivalents of TEMPO were added, the reaction was not inhibited and the desired product (2a) was formed in 62% yield (Fig. 6a). This result suggested that the reaction might not involve a radical process. To probe the reaction further, a kinetic study was conducted (Fig. 6b). According to this study, the propargylamide (1a) was completely converted to an allenamide (3a) in 10 min under the standard conditions. The multi-substituted pyrrole (2a) was then gradually produced from the intermediate allenamide and no other reaction intermediates were observed or identified. On the other hand, DFT calculations of substrates 3b and 4a were carried out at the B3LYP-D3(SMD)/Def2-TZVP//B3LYP-D3/Def2-SVP level of theory to identify the natural bond orbital (NBO) charges on the carbons of the allene moieties. NBO charges on the internal carbon in both 3b and 4a are 0.11 and 0.18, respectively (Fig. 6c) indicating that the nucleophilic addition of cyanide anion onto the internal carbon should be reasonable as opposed to its addition onto the terminal carbon. Pathways of the cyano addition to 3b were also calculated (Fig. 6d). The transition state of cyano addition on the internal carbon (TS1), is indeed much lower than addition on the terminal carbon (TS2). The intermediate of internal carbon addition int1, is more stable than int2, implying that the internal carbon addition pathway is not only kinetically but also thermodynamically favoured.Open in a separate windowFig. 6Mechanistic studies and proposed mechanism.Based on the results of these mechanistic studies, a plausible reaction mechanism for the synthesis of pentasubstituted pyrroles and hexasubstituted pyrrolines is proposed and is shown in Fig. 6e. First, under basic conditions, the propargylamide isomerizes to an intermediate allenamide (A), which can be attacked nucleophilically by the cyanide anion to afford an intermediate imine (B) with release of the sulfonyl group. Then, the second cyanide anion attacks the imine to form an intermediate (C), which can undergo cyclization and protonation to afford the fully substituted pyrrole (2). Similarly, the hexasubstituted pyrroline product (5) can be obtained from double nucleophilic attack of the intermediate (A) by the cyanide ion.     

Redox-neutral manganese-catalyzed synthesis of 1-pyrrolines

This report describes a manganese-catalyzed radical [3 + 2] cyclization of cyclopropanols and oxime ethers, leading to valuable multi-functional 1-pyrrolines. In this redox-neutral process, the oxime ethers function as internal oxidants and H-donors. The reaction involves sequential rupture of C–C, C–H and N–O bonds and proceeds under mild conditions. This intermolecular protocol provides an efficient approach for the synthesis of structurally diverse 1-pyrrolines.

Described herein is a novel manganese-catalyzed radical [3 + 2] cyclization of cyclopropanols and oxime ethers, leading to valuable multi-functionalized 1-pyrrolines.

Pyrroline and its derivatives appear frequently as the core of the structure of natural products and biologically active molecules (Fig. 1A).¹ Such compounds also serve as versatile feedstocks in various transformations, such as 1,3-dipolar cyclization, ring opening, reduction and oxidation, leading to diverse and valuable compounds.^2–4 Over the past few decades, great effort has been devoted to the preparation of pyrrolines. This has resulted in several elegant approaches that rely on photoredox catalysis (Fig. 1B).⁵ The groups of Studer,^5a,b Leonori,^5c and Loh^5d–f disclosed intramolecular addition of the intermediate iminyl radical to alkenes to construct pyrrolines. Generally, the synthetic value of a method can be further improved by using an intermolecular reaction pattern. For example, Alemán et al. recently reported a radical-polar cascade reaction involving the addition to ketimines of alkyl radicals formed in hydrogen atom transfer (HAT) reactions.^5g That the existence of benzylic C–H bonds in the substrates is requisite for the HAT, compromises the substrate scope. Despite the appealing photochemical processes, development of new redox approaches to enrich the product diversity of pyrrolines, especially with inexpensive transition-metal catalysts, is still in demand.Open in a separate windowFig. 1(A) Importance of pyrrolines, and (B and C) synthetic approaches to pyrrolines.Prompted by extensive applications of cyclopropanols in synthesis⁶ and our achievements in manganese-catalyzed ring-opening reactions,⁷ we conceived a radical [3 + 2] cyclization using cyclopropanol as a C3 synthon and oxime ethers as a nitrogen source (Fig. 1C). Hypothetically, single-electron oxidation of cyclopropanol by Mnⁿ generates the β-keto radical (I), which undergoes a radical [3 + 2] cascade reaction with an oxime ether to give the alkoxy radical species (II). Conversion of II to the intermediate (III), the pyrroline precursor, requires an extra H-donor to support a HAT process and an oxidant for recovery of Mnⁿ to perpetuate the catalytic cycle. In this scenario, the strategic inclusion of oxime ether is crucial to the overall transformation. The oxime ether is not only an internal oxidant and H-donor, but should also be subject to in situ deprotection by cleaving the N–O bond during the reaction. The choice of a proper Mnⁿ/Mnⁿ⁻¹ pair with suitable redox potentials is also vital to the catalytic cycle.Herein, we provide proof-of-principle studies for this hypothesis. The desired radical [3 + 2] cyclization of cyclopropanols and O-benzyl oxime ethers is accomplished with manganese catalysis. This redox-neutral process involves sequential rupture of C–C, C–H, and N–O bonds under mild conditions. The intermolecular protocol provides an ingenious approach to the synthesis of multi-functionalized 1-pyrrolines.With these considerations in mind, phenylcyclopropanol (1a) and oxime ether (2a) were initially chosen as model substrates to evaluate reaction parameters in the presence of manganese salt ( N bond of 2a (entry 2). The optimization of organic solvents was then conducted (entries 3–8), and it was found that the use of fluorinated alcohols, such as trifluoroethanol (TFE) and hexafluoroisopropanol (HFIP) as solvents provided excellent yields (entries 7 and 8). Decreasing the amount of Mn(acac)₃ to 1.2 equiv. gave a comparable yield (entry 9), but further reducing the amount compromised the yield (entry 10). Replacing Mn(acac)₃ with Mn(OAc)₃ or MnCl₂ significantly decreased the reaction yield (entries 11 and 12). However, the use of Mn(acac)₂ gave a similar yield to Mn(acac)₃ (entries 13 vs. 9). The above results prompted us to think over the counteranion effect that the acetylacetone (acac) anion may be requisite to the reaction. Indeed, the synergistic use of stoichiometric MnCl₂ and acetylacetone led to a good yield of the desired product (entry 14). More importantly, a comparable yield was obtained with only 0.2 equiv. of MnCl₂ and added acetylacetone, realizing this reaction under a catalytic amount of Mn salts (entry 15). Given that the low solubility of the Mn salt may lead to poor efficiency, a reaction with 0.067 M concentration was carried out and gave a 89% yield (entry 16). Further reducing the amount of acetylacetone to 1.0 equiv. had no influence on the outcome of the reaction (entry 17), but the reaction efficiency slightly decreased when 0.6 equiv. of acetylacetone was used as the additive (entry 18). Use of a decreased amount (1.0 equiv.) of acetic acid led to the best yield (91%, entry 19), whereas the reaction in the presence of 0.5 equiv. acetic acid (entry 20) or without acetic acid (entry 21) also gave high yields. It is noted that acetic acid is not crucial to the reaction using MnCl₂ as catalyst, as the reaction could generate cat. HCl in situ. The reaction with substoichiometric amount (0.6 equiv.) of acac gave a decreased but also good yield (entry 22). Reducing the catalytic loading of MnCl₂ to 10 mol% slightly compromised the yield (entry 23).Optimization of the synthesis of 1-pyrrolines

Entrya	Mn salt (equiv.)	Additive (equiv.)	Solvent	Yield (%)
1	Mn(acac)3 (1.7)	None	CH3CN	33
2b	Mn(acac)3 (1.7)	None	CH3CN	Trace
3	Mn(acac)3 (1.7)	None	DCM	31
4	Mn(acac)3 (1.7)	None	Acetone	25
5	Mn(acac)3 (1.7)	None	DMSO	Trace
6	Mn(acac)3 (1.7)	None	DMF	Trace
7	Mn(acac)3 (1.7)	None	TFE	80
8	Mn(acac)3 (1.7)	None	HFIP	82
9	Mn(acac)3 (1.2)	None	HFIP	83
10	Mn(acac)3 (0.9)	None	HFIP	55
11	Mn(OAc)3·2H2O (1.2)	None	HFIP	36
12	MnCl2 (1.2)	None	HFIP	Trace
13	Mn(acac)2 (1.2)	None	HFIP	88
14	MnCl2 (1.2)	acac (3.6)	HFIP	80
15	MnCl2 (0.2)	acac (3.6)	HFIP	81
16c	MnCl2 (0.2)	acac (3.6)	HFIP	89
17c	MnCl2 (0.2)	acac (1.0)	HFIP	89
18c	MnCl2 (0.2)	acac (0.6)	HFIP	83
19c,d	MnCl2 (0.2)	acac (1.0)	HFIP	91
20c,e	MnCl2 (0.2)	acac (1.0)	HFIP	83
21c,b	MnCl2 (0.2)	acac (1.0)	HFIP	80
22c,d	MnCl2 (0.2)	acac (0.6)	HFIP	82
23c,d	MnCl2 (0.1)	acac (1.0)	HFIP	81

Open in a separate window^aReaction conditions: 1a (0.45 mmol), 2a (0.3 mmol), AcOH (2.0 equiv.), and Mn salt (as shown) in solvent (2.0 mL), at room temperature (rt) under N₂, for 16 h.^bWithout AcOH.^c0.067 M reaction.^d1.0 equiv. AcOH.^e0.5 equiv. AcOH. acac = acetylacetone.With the optimized conditions in hand for the synthesis of 1-pyrrolines, the compatibility of various cyclopropanols was inspected (Scheme 1). Common functional groups on the phenyl ring, including halides (3b–3d), ester (3f), ether (3j), were compatible under the reaction conditions. Regardless of the presence of electron-withdrawing or -donating substituents at the para-position of this phenyl ring, the reactions readily proceeded with generally high yields (3b–3j). The cyclopropanol (1k) with an ortho-methyl substituent underwent a cyclization reaction with excellent yield, demonstrating that steric effects had little effect on product of the reaction (3k). By replacing the phenyl group with a naphthyl or thienyl group, the corresponding products (3l and 3m) were produced with slightly lower yields. When 2-substituted cyclopropanols were utilized, these reactions gave rise to a portfolio of trisubstituted 1-pyrrolines (3n–3u).The relative configuration of 3u was determined by comparison with a reported structure.⁸ Remarkably, this protocol provided a convenient method for the construction of an N-containing spiro skeleton (3t). The reaction with alkyl cyclopropanols could also furnish the desired products (3v–3x) smoothly and with good yields.Open in a separate windowScheme 1Scope of cyclopropanols. Reaction conditions: 1 (0.3 mmol), 2a (0.2 mmol), AcOH (0.2 mmol), MnCl₂ (0.04 mmol), and acac (0.2 mmol) in HFIP (3.0 mL), at rt under N₂. The d.r. values were determined by ¹H NMR analysis with crude reaction mixture, and major isomers are shown with relative configurations. ^aThe reaction is scaled up for 10 times.Next, we studied the scope of oxime ethers (Scheme 2). Steric hindrance from the ester moiety in the oxime ethers appeared not to influence the reaction outcome. Oxime ethers bearing various esters, such as phenyl (3y), biphenyl (3z and 3ab), 2-naphthyl (3aa), 2,4-di-tert-butylphenyl (3ac and 3ad), and 2,6-dimethylphenyl (3ae) esters all reacted smoothly. In addition, the substrate with tert-butyl ester also readily underwent cyclization to afford the desired product 3af with excellent yield. Remarkably, the trifluoromethyl-substituted pyrroline (3ag) was afforded almost quantitatively from the corresponding ketoxime ether. However, if the trifluoromethyl group was replaced by a methyl or phenyl group, the reaction failed to give rise to the desired product (3ah or 3ai), and this might be attributed to poorer electrophilic nature of the methyl or phenyl substituted substrate.Open in a separate windowScheme 2Scope of oxime ethers. Reaction conditions: 1 (0.3 mmol), 2 (0.2 mmol), AcOH (0.2 mmol), MnCl₂ (0.04 mmol), and acac (0.2 mmol) in HFIP (3.0 mL), at rt under N₂. The d.r. values were determined by ¹H NMR analysis with crude reaction mixture, and major isomers are shown with relative configurations.To illustrate the utility of this protocol, we carried out a set of synthetic applications using 1-pyrroline (3a) (Scheme 3). Upon treatment with acetyl chloride and pyridine at 42 °C, 1-pyrroline (3a) could be readily converted into the acyclic amino acid derivative (4). The reaction between 3a and LiAlH₄ gave rise smoothly to the corresponding alcohol (5). In the presence of 2,3-dichloro-5,6-dicyano-1,4-benzoquin-4-one (DDQ) and triethylamine, the 2,5-disubstituted pyrrole (6) was obtained. Moreover, treatment of 3a with MeOTf and NaBH₄ delivered the N-methyl proline derivative (7).⁹Open in a separate windowScheme 3Synthetic applications. Reaction conditions: (a) AcCl, pyridine, dry DCE, 42 °C, 63% yield; (b) LiAlH₄, THF, reflux, 90% yield; (c) DDQ, Et₃N, DCM, rt, 53% yield; (d) MeOTf, DCM, and then NaBH₄, THF, 40% yield, cis : trans = 6.6 : 1.To probe the mechanistic pathways, we performed a radical trapping experiment in the presence of 2.0 equiv. of radical scavenger TEMPO. The radical trapping product (8) was detected by high-resolution mass spectrometry (HRMS) (Scheme 4A, top). In addition, the reaction was obviously suppressed when 1,1-diphenylethylene was added under standard condition (Scheme 4A, bottom). These results suggested that this process engaged in a radical pathway. Kinetic studies illustrated that the reaction immediately started with 20 mol% Mn(acac)₂ but an approximate 15 min of induction period was appeared by using Mn(acac)₃, which probably indicated that the reaction was initiated with Mn(ii) rather than Mn(iii), and the Mn(ii)/Mn(i) cycle might be involved in the transformation (Scheme 4B, for details see ESI^†).Open in a separate windowScheme 4(A and B) Mechanistic studies, and (C) proposed mechanism.On the basis of these results, a plausible mechanism for this radical process was proposed in Scheme 4C. Initially, the interaction between cyclopropanol (1a) and Mn(ii) salt gives rise to the alkoxy manganese species (I), which undergoes a ligand-to-metal charge transfer (LMCT) process, leading to the alkoxy radical (II).^5f Subsequent ring-opening of the alkoxyl radical (II) provides the alkyl radical (III). The addition of intermediate (III) to the oxime ether, possibly activated by HFIP or HOAc, furnishes the N-centered radical (IV), which intramolecularly attacks the ketone to afford a new alkoxy radical (V).¹⁰ The subsequent 1,5-hydrogen atom transfer (HAT) process delivers the alkyl radical (VI) at the α-position adjacent to the O atom, thus driving N–O bond cleavage to generate the N-centered radical (VII),^5b,11 and benzaldehyde which was detected by TLC. This radical intermediate (VII) undergoes a single electron transfer (SET) mediated by the reduced-state Mn(i) species, and protonation to yield the cyclic pyrrolidine (VIII). Finally, dehydration of this intermediate produces 1-pyrroline (3a).     

Phosphine-catalyzed activation of cyclopropenones: a versatile C3 synthon for (3+2) annulations with unsaturated electrophiles

We herein report a phosphine-catalyzed (3 + 2) annulation of cyclopropenones with a wide variety of electrophilic π systems, including aldehydes, ketoesters, imines, isocyanates, and carbodiimides, offering products of butenolides, butyrolactams, maleimides, and iminomaleimides, respectively, in high yields with broad substrate scope. An α-ketenyl phosphorous ylide is validated as the key intermediate, which undergoes preferential catalytic cyclization with aldehydes rather than stoichiometric Wittig olefinations. This phosphine-catalyzed activation of cyclopropenones thus supplies a versatile C₃ synthon for formal cycloadditon reactions.

A phosphine-catalyzed (3 + 2) annulation of cyclopropenones with a wide variety of electrophilic π systems has been developed, in which an α-ketenyl phosphorous ylide is validated as the key intermediate used as a versatile C₃ synthon.

The development of effective strategies to construct cyclic molecular architectures has attracted long-standing interest from the chemistry community.¹ In this regard, phosphine catalysis² has emerged as a powerful and versatile approach for the construction of various carbo- and heterocyles. Lu''s (3 + 2),³ Kwon''s (4 + 2),⁴ and Tong''s (4 + 1)⁵ annulations represent seminal advances in this field, from which a plethora of reactions⁶ and asymmetric variants^2b have been inspired. Since phosphine-catalyzed reactions are usually initiated by the conjugate addition of a phosphine to a polar double or triple bond to generate reactive zwitterionic intermediates, the prevalent substrates of phosphine catalysis rely almost entirely on electron-deficient alkenes, alkynes, allenes, and their derivatives^2a (Fig. 1a). These substrate entities serve as effective C₁ to C₄ synthons for generating various ring systems. Alternatively, we envisaged that the integration of the C–C bond activation of strained carbocycles within phosphine catalysis would significantly expand the scope. In 2018, we disclosed that electron-deficient vinylcyclopropanes (VCPs) undergo phosphine-catalyzed activation to generate zwitterions A that triggers the rearrangement of vinylcyclopropylketones to cycloheptenones (Fig. 1b, up).⁷ Very recently, an elegant phosphine-catalyzed enantioselective (3 + 2) annulation of electron-deficient vinylcyclopropanes with N-tosylaldimines with a zwitterion B as the key intermediate has been developed by Lu and co-workers⁸ (Fig. 1b, down). In the meantime, we have established that electron-deficient alkylidenecyclopropanes (ACPs) also readily undergo phosphine-catalyzed substrate-controlled rearrangements to afford polysubstituted furans and dienones.⁹Open in a separate windowFig. 1Substrates of phosphine-catalyzed annulation reactions. (a) Commonly used substrates of phosphine catalysis. (b) The use of electron-deficient vinylcyclopropanes (VCPs) as substrates in a phosphine-catalyzed rearrangement reaction (up), and (3 + 2) annulation with N-tosylaldimines (down). (c) This work describes the use of cyclopropenones as a versatile C₃ synthon for annulation reactions under phosphine catalysis.As part of ongoing studies, we hypothesized that cyclopropenones, as triggered by phosphines, would serve as C₃ synthons for possible (3 + n) annulations (Fig. 1c). Mechanistically, the nucleophilic addition of a phosphine to cyclopropenones followed by ring cleavage would generate an α-ketenyl phosphorus ylide C.¹⁰ Prescher and co-workers¹¹ have previously employed such ylides to react with nucleophiles, e.g. primary amines, for applications in bioorthogonal ligations. By virtue of its amphiphilic structure bearing both a nucleophilic ylide and an electrophilic ketene moiety, we proposed that it might be used as a 1,3-dipole surrogate for annulation reactions with unsaturated electrophiles (Fig. 1c).As a subclass of “non-benzenoid aromatic compounds”, cyclopropenones¹² are strained, highly unsaturated, and readily available building blocks which have drawn tremendous interest in contemporary organic synthesis due to their unique and versatile reactivities.¹³ The activation of these strained compounds is typically achieved through transition metal catalysis, via oxidative addition to the C–C single bond¹⁴ to bring about various transformations,^13b especially annulation reactions.¹⁵ Wender and co-workers^15b pioneered the Rh-catalyzed (3 + 2) cycloaddition of cyclopropenones with alkynes to build cyclopentadienones, whereas Li and co-workers^15f developed a Ni-catalyzed (3 + 2) annulation of cyclopropenones with α,β-unsaturated ketones/imines to access butenolides and lactams. Gleiter and co-workers^15k,l also demonstrated an interesting Co-mediated dimerization of cyclopropenones to form Co-capped benzoquinones. Other metal complexes involving Pd,^15c,i Ru,^15a,16 Ag,¹⁷ and so forth,¹⁸ are also known to facilitate a range of annulations with cyclopropenones. Compared to transition metal-catalyzed methods, however, the organocatalytic activation of cyclopropenones toward practical transformations remains far less explored.¹⁹ Stemming from our interest in Lewis base catalysis,^7,9,20 we now report the phosphine-catalyzed activation of cyclopropenones as a new subset of C₃ synthons that are capable of undergoing (3 + 2) annulations with various unsaturated electrophiles (vide infra).Initially, we examined the phosphine-catalyzed reaction of diphenylcyclopropenone 1a with several activated alkenes such as acrylates and maleates. These attempts were unsuccessful; however, the employment of benzaldehyde 2a as the reaction partner led to the anticipated (3 + 2) annulation to afford a butenolide product 3a (21 Another point of note is that the aforementioned α-ketenyl phosphorus ylide C does not undergo the usual Wittig reaction with aldehydes but enters into a catalytic cycloaddition pathway (see mechanism discussions below).Survey on conditions^a

C(sp3)–C(sp3) coupling of non-activated alkyl-iodides with electron-deficient alkenes via visible-light/silane-mediated alkyl-radical formation

Here, we present a remarkably mild and general initiation protocol for alkyl-radical generation from non-activated alkyl-iodides. An interaction between a silane and an alkyl iodide is excited by irradiation with visible light to trigger carbon–iodide bond homolysis and form the alkyl radical. We show how this method can be developed into an operationally simple and general Giese addition reaction that can tolerate a range of sensitive functionalities not normally explored in established approaches to this strategically important transformation. The new method requires no photocatalyst or other additives and uses only commerical tris(trimethylsilyl)silane and visible light to effectively combine a broad range of alkyl halides with activated alkenes to form C(sp³)–C(sp³) bonds embedded within complex frameworks.

Here, we present a remarkably mild and general initiation protocol for alkyl-radical generation from non-activated alkyl-iodides.

The efficient and straightforward construction of C(sp³)–C(sp³) bonds is a crucial process in organic synthesis. Over the past 80 years, the polar conjugate addition reaction has become a powerful method to forge a variety of C(sp³)–C(sp³) bonds.¹ Alongside two-electron nucleophiles, alkyl-radicals – neutral yet nucleophilic species – have emerged as alternatives to organometallic reagents for additions to electron deficient alkenes.² Since the 1960s, a variety of methods have been reported for the formation of alkyl-radicals; early examples include the decomposition of in situ generated organomercurial hydrides, the fragmentation of xanthate or Barton esters, or the UV-mediated homolysis of alkyl halides, amongst many others.³ Although these strategies tolerate a broad range of functionalities, the initiation processes can be complicated by the need for aggressive reaction conditions and frequently require toxic reagents such as tributyltin hydride, with notable exceptions.^4,5The emergence of photoredox catalysis has obviated many of the potential drawbacks to the generation and use of alkyl-radicals. The exploitation of the multifaceted reactivity of visible light excited transition metal or organic-photocatalysts, whose properties can be tuned through modification of the ligand, metal and/or scaffold, facilitates optimization of the single electron transfer event towards alkyl-radical generation from a wide range of functionalized alkyl groups.⁶ In addition, the reactivity of electron donor–acceptor (EDA) complexes has also provided a straightforward means to form alkyl-radicals from a variety of precursors.⁷ As such, a plethora of methods have been developed for the generation of C(sp³)-centred radicals from a variety of commercially available native functionalities, which dramatically expand the scope of alkyl-radical chemistry^†. In this context, the single electron reduction of non-activated alkyl halides provides a useful means to generate alkyl radicals.⁸ As an example, Leonori and co-workers recently developed a method wherein halogen atom abstraction pathways were leveraged using radical species forged through photocatalyst-mediated oxidation event leading to a general alkyl-radical generation.⁹ Related to the current study, Jørgensen and co-workers published a visible-light mediated reduction of alkyl halides under very mild conditions. Accordingly, there remains a need for further innovation towards orthogonal, general and benign methods of alkyl-radical generation that tolerate a broad range of functionalities, thereby enabling the construction of a greater variety of C(sp³)–C(sp³) bonds.¹⁰Recently, we reported a general reaction to form tertiary alkylamines via the addition of alkyl-radicals (generated from non-activated alkyl-iodides) to in situ-generated all-alkyl iminium ions.^11a This carbonyl alkylative amination (CAA) reaction was promoted by the action of blue LEDs and tris(trimethylsilyl)silane ((Me₃Si)₃Si–H). No photoredox catalyst is required. We believe that the alkyl-radical formation step, devoid of traditional initiating reagents, proceeds through the visible-light excitation of a transient ternary EDA complex, which stimulates homolysis of the carbon–iodide bond that would be otherwise stable under such irradiation conditions (Fig. 1B). The presence of an enamine was important to the initiation pathway, as revealed by an absorption band in the UV/vis spectrum of its mixture with an alkyl-iodide and (Me₃Si)₃Si–H.^11a Gouverneur and co-workers have also reported an elegant example of visible-light mediated addition of more functionalized alkyl halides, such as iodofluoromethane, to electron deficient alkenes.¹² They proposed that light mediated homolytic cleavage of iodofluoromethane was responsible for radical initiation prior to a classical chain process.Open in a separate windowFig. 1(A) Selected visible-light mediated methods for the generation of alkyl-radicals; (B) previous work – a method for tertiary amine formation exploiting a visible-light activation of a ternary EDA complex to promote alkyl-radical formation. (C) Previous work from Gouverneur & Gaunt labs on radical fluoromethylation. (D) This work – alkyl-radical formation promoted solely by visible light and tris-trimethylsilyl silane demonstrated through a remarkably practical and straightforward Giese reaction.Gouverneur et al. also showed methyl iodide was only efficient as a radical source under these conditions when an organic photocatalyst was present and the reaction of other simple non-activated alkyl iodides was only demonstrated in the presence of iodofluoromethane, which was presumably responsible for the initiation pathway (vide supra). Our prior work in this area also identified iodofluoromethane as a visible-light activated source of fluoromethyl radical and its addition to iminium ions and electron deficient alkenes (Fig. 1C).^11b Taken together, these works reveal that the use of visible light and (Me₃Si)₃Si–H to initiate radical formation from non-activated alkyl halides has not been achieved in an unbiased transformation without the requirement of an initiation process via of the reaction components or a photocatalyst. Accordingly, we questioned whether a pathway mediated by visible-light and (Me₃Si)₃Si–H alone might facilitate alternative modes of radical initiation from non-activated alkyl halides, and therefore enable the general coupling of unbiased alkyl fragments with a wider range of acceptors under practical, straightforward reaction conditions.Herein, we report the successful realization of this idea through the development of a remarkably straightforward visible-light mediated method for alkyl-radical generation from non-activated alkyl iodides using only non-toxic tris(trimethylsilyl)silane as a reagent (Fig. 1D). While we are not certain of the precise pathway for the radical initiation, it seems likely that excitation of a species resulting from the interaction of tris(trimethylsilyl)silane and the alkyl iodide, leading to carbon–iodide bond homolysis. The utility of this activation mode is demonstrated through a broad and chemoselective Giese addition to electron deficient alkenes and is notable by its tolerance to a range of synthetically valuable functionalities in both alkyl iodide and alkene components. In comparison to other methods for Giese-addition,^2,3,8,9,12 the conditions are mild and do not require expensive catalysts or cocktails of additives.Our studies were stimulated from an observation arising from the development of the visible light mediated carbonyl alkylative amination (shown in Fig. 1B). High yields of the tertiary amine product, arising from the union of alkyl-radical, aldehyde and secondary amine were maintained when using a 455 nm long-pass filter, which discounted UV-mediated carbon–iodide bond homolysis as the initiation pathway for alkyl-radical formation.^11a To explore the formation of an alkyl-radical independently from the enamine component, the reaction conditions were simplified to comprise a representative alkyl halide and (Me₃Si)₃Si–H, which allowed us to first assess any impact solvent might have on the radical forming process. As shown in 13 However, 47% of 5 was still obtained after visible-light irradiation of a reaction mixture from which air had been rigorously excluded (entry 10), suggesting an alternative initiation pathway excluding oxygen could also operate.¹⁴ A reaction at 80 °C in the absence of light showed no conversion to 5. This data shows the nature of the solvent is not relevant for the initiation step and suggests a straightforward radical initiation process that results from visible-light excitation of an intermediate arising from an interaction between the alkyl halide and (Me₃Si)₃Si–H.Effect of different parameters on radical initiation^a

Hypervalent iodine-mediated β-difluoroalkylboron synthesis via an unusual 1,2-hydrogen shift enabled by boron substitution

β-Difluoroalkylborons, featuring functionally important CF₂ moiety and synthetically valuable boron group, have great synthetic potential while remaining synthetically challenging. Herein we report a hypervalent iodine-mediated oxidative gem-difluorination strategy to realize the construction of gem-difluorinated alkylborons via an unusual 1,2-hydrogen migration event, in which the (N-methyliminodiacetyl) boronate (BMIDA) motif is responsible for the high regio- and chemoselectivity. The protocol provides facile access to a broad range of β-difluoroalkylborons under rather mild conditions. The value of these products was demonstrated by further transformations of the boryl group into other valuable functional groups, providing a wide range of difluorine-containing molecules.

A hypervalent iodine-mediated gem-difluorination allows the facile synthesis of β-difluoroalkylborons. An unusual 1,2-hydrogen migration, triggered by boron substitution, is involved.

Organofluorine compounds have been widely applied in medicinal chemistry and materials science.^1a–d In particular, the gem-difluoro moiety featuring unique steric and electronic properties can act as a chemically inert isostere of a variety of polar functional groups.^2a–c Therefore, the construction of gem-difluoro-containing compounds has received considerable attention in recent years. Efficient methods including deoxyfluorination of carbonyl compounds,^3a,b photoredox difluorination,⁴ radical difluorination,⁵ and cross-coupling reactions with suitable CF₂ carriers^6a–f are well developed. Alternatively, iodoarene-mediated oxidative difluorination reactions provide valuable access to these motifs by using simple alkenes as starting materials.^7a–i Previously, these reactions were generally associated with a 1,2-aryl or 1,2-alkyl migration (Scheme 1a).^7a–f Recent developments also allowed the use of heteroatoms as migrating groups, thereby furnishing gem-difluoro compounds equipped with easily transformable functional groups (Scheme 1b). In this regard, Bi and coworkers reported an elegant 1,2-azide migrative gem-difluorination of α-vinyl azides, enabling the synthesis of a broad range of novel β-difluorinated alkyl azides.^7g Jacobsen developed an iodoarene-catalyzed synthesis of gem-difluorinated aliphatic bromides featuring 1,2-bromo migration with high enantioselectivity.^7h Almost at the same time, research work from our group demonstrated that not only bromo, but also chloro and iodo could serve as viable migrating groups.⁷ⁱOpen in a separate windowScheme 1Hypervalent iodine-mediated β-difluoroalkylboron synthesis.We have been devoted to developing new methodologies for the assembly of boron-containing building blocks by using easily accessible and stable MIDA (N-methyliminodiacetyl) boronates^8a–c as starting materials.^9a–e Recently, we realized a hypervalent iodine-mediated oxidative difluorination of aryl-substituted alkenyl MIDA boronates.^9d Depending on the substitution patterns, the reaction could lead to the synthesis of either α- or β-difluoroalkylborons via 1,2-aryl migration (Scheme 1c). Recently, with alkyl-substituted branched alkenyl MIDA boronates, Szabó and Himo observed an interesting bora-Wagner–Meerwein rearrangement, furnishing β-difluorinated alkylboronates with broader product diversity (Scheme 1d).¹⁰ While extending the scope of our previous work,^9d we found that the use of linear alkyl-substituted alkenyl MIDA boronates also delivers β-difluoroalkylboron products. Intriguingly, instead of an alkyl- or boryl-migration, an unusual 1,2-hydrogen shift takes place. It should be noted that internal inactivated alkenes typically deliver the 1,2-difluorinated products, with no rearrangement taking place.^11a–d Herein, we disclose our detailed study of our second generation of β-difluoroalkylborons synthesis (Scheme 1e). The starting linear 1,2-disubstituted alkyl-substituted alkenyl MIDA boronates, unlike the branched ones,¹⁰ could be readily prepared via a two-step sequence consisting of hydroborylation of the terminal alkyne and a subsequent ligand exchange with N-methyliminodiacetic acid. This intriguing 1,2-H shift was found to be closely related to the boron substitution, probably driven thermodynamically by the formation of the β-carbon cation stabilized by a σ(C–B) bond via hyperconjugation.^12a–dTo start, we employed benzyl-substituted alkenyl MIDA boronate 1a as a model substrate (9d the use of F sources such as CsF, AgF and Et₃N·HF in association with PhI(OAc)₂ (PIDA) as the oxidant and DCM as the solvent led to no reaction (entries 1 to 3). The use of Py·HF (20 equiv) successfully provided β-difluorinated alkylboronate 2a, derived from an unusual 1,2-hydrogen migration, in 39% yield (entry 4). By simply increasing the loading of Py·HF to 40 equivalents, a higher conversion and thus an improved yield of 61% was obtained (entry 5). No further improvement was observed by using a large excess of Py·HF (100 equiv) (entry 6). Other hypervalent iodine oxidants such as PhIO or PIFA were also effective but resulted in reduced yields (entries 7 and 8). A brief survey of other solvents revealed that the original DCM was the optimal one (entries 9 and 10).Optimization of reaction conditions

Direct electrochemical hydrodefluorination of trifluoromethylketones enabled by non-protic conditions

CF₂H groups are unique due to the combination of their lipophilic and hydrogen bonding properties. The strength of H-bonding is determined by the group to which it is appended. Several functional groups have been explored in this context including O, S, SO and SO₂ to tune the intermolecular interaction. Difluoromethyl ketones are under-studied in this context, without a broadly accessible method for their preparation. Herein, we describe the development of an electrochemical hydrodefluorination of readily accessible trifluoromethylketones. The single-step reaction at deeply reductive potentials is uniquely amenable to challenging electron-rich substrates and reductively sensitive functionality. Key to this success is the use of non-protic conditions enabled by an ammonium salt that serves as a reductively stable, masked proton source. Analysis of their H-bonding has revealed difluoromethyl ketones to be potentially highly useful dual H-bond donor/acceptor moieties.

The electrochemical hydrodefluorination of trifluoromethylketones under non-protic conditions make this single-step reaction at deeply reductive potentials uniquely amenable to challenging electron-rich substrates and reductively sensitive functionalities.

The difluoromethyl group (CF₂H) has attracted significant recent attention in medicinal chemistry,^1,2 which complements the well-documented importance and growing use of fluorine in small molecule pharmaceuticals.^3–6 The CF₂H group is an H-bond donor^7,8 that is also lipophilic,^9,10 a unique combination that positions it as an increasingly valuable tool within drug-discovery.¹¹ CF₂H has been used as a bioisostere of OH and SH in serine and cystine moieties, respectively, as well as NH₂ groups, where greater lipophilicity and rigidity provide advantages to pharmacokinetics and potency.^12–14The hydrogen-bond acidity of CF₂H groups is exceptionally dependent on the atom or group to which it is appended (Fig. 1A).^1,2 The H-bond acidity of alkyl-CF₂H groups is half that of O–CF₂H and even a quarter of SO₂–CF₂H groups.¹ This mode of control allows the H-bonding strength and, therefore its function, to be finely tuned. While much research has focused on the synthesis, behaviour and use of XCF₂H groups, where X = O, S, SO, SO₂, Ar, it is surprising that the corresponding carbonyl containing moiety (X = CO) has remained relatively elusive in these contexts. Not only would difluoromethyl ketones (DFMK) be expected to provide a relatively strong H-bond, but the carbonyl unit provides a complementary, yet proximal mode of intermolecular interaction (Fig. 1B). Indeed, the dual action of neighbouring H-bond donor and acceptor functionalities provides the fundamental basis for many biological systems, including in the secondary structure assembly mechanisms for proteins and DNA/RNA nucleobase pairing, as well as in enzyme/substrate complexes. Indeed, the DFMK functionality has demonstrated important utility in biological applications, including anti-malarial and -coronaviral properties.¹⁵ Finally, the carbonyl provides a useful synthetic handle for further derivatization.Open in a separate windowFig. 1H-Bonding in DFMKs and their synthesis via hydrodefluorination.While some progress has been made on the synthesis of DFMKs,¹⁶ there still remains a need for a general and more broadly accessible route to their preparation. Current strategies for DFMK preparation require multi-step processes, expensive reagents, installation of activating groups, or are inherently low yielding.^15a,16–25 The hydrodefluorination of trifluoromethyl ketones (1) potentially represents the most accessible strategy, as the starting materials are most readily prepared through a high-yielding trifluoroacetylation of C–H or C–X bonds.^26–29 In 2001, Prakash demonstrated the viability of this approach using 2 equivalents of magnesium metal as stoichiometric reductant to drive the defluorination, with a second hydrolysis step (HCl (3–5 M) or fluoride, overnight stirring) to reveal the product.³⁰ The scope in this 2-step process (6 substrates) reflects the limitations of using a reductant, such as Mg, that has a fixed reduction potential, as well as incompatibilities arising from Mg/halide exchange with aryl halides. Similar limitations with the use of electron-rich substrates were revealed in related contributions from Uneyama.³¹In order to access more electron-rich and reductively challenging substrates, such as those containing medicinally relevant heterocycles, we postulated that electrochemical reduction could be employed (Fig. 1C). Electrosynthesis is becoming an increasingly valuable enabling technology and has seen a recent resurgence due to the precise control, unique selectivity, and the potential scalability and sustainability benefits that it offers.^32–36 This strategy would avoid the undesirable use of stoichiometric metals and the ‘deep-reduction’ potentials required are readily accessed by simply selecting the applied potential. Pioneering early work from Uneyama on the cathodic formation of silylenol ether intermediate 2, suggested this approach could be viable.^37,38 The fundamental challenge in designing a practical, single-step process under highly reducing potentials (<−2.0 V vs. Fc/Fc⁺), is to avoid the reduction of the proton source, which would otherwise compete to generate H₂ gas and leave the starting material untouched. Uneyama does not demonstrate hydrodefluorination, presumably due to this problem. Additional challenges posed by ‘deep-reduction’ include a lack of tolerance for reduction-sensitive functionality (alkene, C–X bonds etc.), low mass balance due to substrate decomposition and the undesirable use of sacrificial metal anodes.³⁹ Solving these problems should provide generally applicable, safe and scalable conditions for the hydrodefluorination of readily accessible trifluoromethyl ketones (1).Given the electron-rich nature of indoles, their ubiquity in bioactive compounds, and their ease of functionalisation, we chose indole 1a as the model substrate for optimisation. The highly reductive potentials required will render it a challenging substrate, which should lead to more general conditions suitable for other important substrate classes. Indeed, when we applied the Mg conditions of Prakash to this substrate, no silyl enol ether intermediate (2a) was observed, nor product 3a, and the starting material remained completely untouched ( EntryConditions different from aboveReductantProton source 1a ^a/%(2a) 3a^a/%1 Mg ⁰, THF, no electricity (Prakash conditions for3)Mg⁰—100(0) n/a2^bUndivided cell, TBAPF₆Sacrificial Mg anode—100(0) n/a3^bPb:C (cath:an), 0 ^oC, 30 mA (Uneyama conditions for2)TBABr (4 eq.)—33(32) 04^b—TBABr (2 eq.)(a) Acetic acid; (b) oxalic acid.51; 1000; 05^b—TBABr (2 eq.)Dimethylurea8206^b—TBABr (2 eq.)TEAPF₆ (4 eq.)49457TMSCl (0 eq.)TBABr (2 eq.)TEAPF₆ (4 eq.)8308^bTMSCl (6 eq.)TBABr (2 eq.)TEAPF₆ (4 eq.)49499^c TMSCl (3 + 3 eq.) TBABr (2 eq.) TEAPF ₆ (4 eq.) 0 97 10^cEntry 9, but Pt:Gr (cath:An)TBABr (2 eq.)TEAPF₆ (4 eq.)09411^cEntry 9, but Ni:Pt (cath:An)TBABr (2 eq.)TEAPF₆ (4 eq.)08312^cEntry 9, but Stainless Steel:Pt (cath:An)TBABr (2 eq.)TEAPF₆ (4 eq.)08513^cEntry 9, but Gr:Pt (cath:An)TBABr (2 eq.)TEAPF₆ (4 eq.)018Open in a separate window^{a 19}F NMR yields.^bTMSCl only added to cathodic chamber.^cTMSCl added to both cathodic and anodic chambers.The electrochemical conditions of Uneyama for preparing silylenol ethers (2) were applied to our indole 1a (entry 3). Unsurprisingly, no hydrodefluorinated product was observed, however intermediate 2a was formed in a 32% yield. In an effort to improve this yield we explored several solvents, reductants, additives and electrode materials, all of which were conducted in a divided cell at constant current and ambient temperature.⁴⁰ In addition, as we were keen to develop a single-step protocol, by avoiding the second hydrolysis step that can readily form homo-coupled aldol side products,³⁸ we surveyed a range of added proton sources for in situ delivery of 3a. The addition of carboxylic acids, such as acetic or oxalic acid (entry 4), gave no desired product, as the competing reduction of protons to H₂ gas dominated. Dimethylurea was recently used as a proton source in an electrochemical ‘deep-reduction’,⁴¹ but it returned no trace of intermediate 2a or product 3a (entry 5). We hypothesized that increasing the conductivity of the system, with additional tetraalkylammonium salts (from 2 to 4 eq.), the formation of intermediate 2a may be facilitated by avoiding large cell potentials. While this change did facilitate a lower cell potential, we discovered these salts behaved as reductively stable yet competent masked proton donors: 4 eq. NEt₄PF₆ gave 45% yield of product 3a, with no sign of intermediate 2a (entry 6). The detection of triethylamine in solution suggests donation through a Hoffmann elimination.⁴² With the exception of NMe₄⁺, other tetraalkylammonium salts were also competent proton donors (NEt₄⁺ > NBu₄⁺ > NPr₄⁺).A critical improvement to the yield was observed when the use of the radical anion trapping agent, TMSCl, was optimised. With no TMSCl, 3a was not observed (entry 7), and a loading of 6 equivalents saw little improvement over 3 equivalents (entry 8 vs. 6). Experiments hitherto described were conducted with TMSCl added only to the cathodic chamber (entries 2–8). Only when the 6 equivalents was split between both chambers was a drastic improvement observed (entry 9), giving an optimised yield of 97%. Notably, the increase in conversion still occurred with only 2 F, implying that a lower steady-state concentration may be important in the cathode chamber. To test this hypothesis, TMSCl was slowly added to the catholyte by syringe-pump addition over the course of the reaction, which gave a similar yield of 94%.⁴⁰ Although intermediate 2a is transient and was never observed, the importance of TMSCl to trap and stabilise reduced 1a was revealed by DFT (B3LYP/6-311+g(d)) calculations,⁴⁰ which suggested a thermodynamically highly challenging reaction in its absence.The oxidation of bromide to tribromide occurs on the anode, which is an ideal counter-electrode process: not only is bromide an inexpensive and metal-free sacrificial reductant, but as the produced Br₃⁻ is anionic, it does not rapidly migrate to the cathodic chamber, preventing unwanted side reactions.⁴³ The generated Br₃⁻ can even be used in follow-up bromination reactions.⁴⁴ An increase in the applied cell potential during the reaction signifies the consumption of Br⁻, and the oxidation of Br₃⁻ to Br₂ (Fig. 2).⁴⁵ Despite needing 3 equivalents of Br⁻ to form 2 equivalents of Br₃⁻ after 2 F, the loading of Br⁻ could be reduced to 2 equivalents without affecting yield. No over-reduction of 3a to the monofluoromethyl ketone was observed, which is significant considering the small difference in reduction potentials.⁴⁰ This emphasises the importance of a flat chronopotentiometry trace that is achieved with Br⁻ oxidation. Other reductants were found to be sub-optimal, including diisopropylamine and oxalic acid.⁴⁰Open in a separate windowFig. 2Reaction of 1a to 3a with 3 different Br⁻ concentrations.A graphite anode performed equally well as platinum for the counter electrode reaction (entry 10). Only marginally reduced yields were observed with nickel and stainless-steel cathodes (entries 11 and 12), however, a drastic decrease in the yield was observed with a graphite cathode (entry 13), possibly due to substrate grafting.³⁹We proceeded to explore the substrate scope with our optimized conditions, Fig. 3. As expected, our electrochemical conditions were suitable for the hydrodefluorination of electron-poor acetophenone derivatives (1b, 1c). However, unlike with the use of Mg,³⁰ substrates containing electron donating substituents are now well tolerated (1d–k). In addition, no hydrodebromination was observed for 1b, highlighting the selectivity and orthogonality granted by the use of our Mg-free, non-protic conditions. A selection of extended π-systems was tolerated, producing pyridyl 3l, biphenyl 3m, benzothiophene 3n, primary amine 3o, and pyrimidines 3p and 3q and in moderate to excellent yields. Chromoionophore dye 1r and stilbene 1s and were transformed in excellent yield, demonstrating tolerance to reductively sensitive alkenes, which would otherwise hydrogenate under protic electrochemical conditions.⁴⁶ Anthracenyl 1t and naphthyl substrates 1u and 1v all transformed efficiently in good to excellent yields, the latter of which underwent direct double hydrodefluorination. 4.5% over-reduction was observed in the double defluorination product, 3v, which was the only instance where this side-product was observed in greater than 1% quantities.⁴⁰ The good mass-balance and faradaic efficiency is notable considering the delocalization of charge around extended π-systems increases the likelihood of grafting.⁴⁷Open in a separate windowFig. 3Isolated yields of DFMKs tested under the reaction conditions at 0.5 mmol scale. NMR yields in parentheses. ^aReaction run at 10 mA; ^breaction run in IKA Divided ProSyn: quantitative yield based on RSM; ^c5 mmol scale, Ni foil:Gr (cath:an); ^disolated as the corresponding ketone following purification on silica.⁴⁹The model indole substrate 1a gave an excellent yield of DFMK at 0.5 mmol scale, which gave equally high yields when scaled up 10-fold (5 mmol), thereby demonstrating the robustness and practicality of the technique. We were also able to successfully prepare 3a in a commercially available divided cell set-up.⁴⁰ Alternative groups on nitrogen, including Boc, perfluoropyridyl and benzyl (3w–y), as well as the free indole 3z, were well tolerated and gave moderate to good yields of 3. Tosyl and acetyl groups on nitrogen were less well tolerated.⁴⁰ As with the acetophenones, indoles with electron donating (1aa) and withdrawing (1ab) groups proceeded to product. Methoxy demethylation of 3aa should lead to the corresponding phenol,⁴⁸ which is difficult to prepare using other methodologies due to competing side-reactions. Halide substitution also successfully yielded DFMKs (3ac–ag). The inclusion of the aryl-iodide functionality is especially notable due to its facile reduction; when a silver cathode was used to convert 1ag, hydrodeiodination was observed, but which was absent under our non-protic conditions with a Pt cathode. Increased steric bulk around the reacting center in thiophenyl and phenyl-substituted substrates 1ah and 1ai had no negative influence and gave good yields of product.Heterocyclic trifluoromethylketones were successfully hydrodefluorinated under the standard conditions, including indole 3aj, carbazole 3ak, pyrrole 3al, pyridine 3am, and pyrazoles 3an and 3ao, the latter of which leads to a compound with anti-malarial activity.^15a Alkyl trifluoromethylketones are more difficult to reduce compared to aromatic trifluoromethylketones, and are therefore challenging substrates to hydrodefluorinate, and impossible to convert using other methods. Nevertheless, oleyl 1ap, cyclohexyl 1aq and ethyl 1ar substrates were all amenable to the conditions, although the smaller alkyl products were cumbersome to isolate due to their volatility. The non-protic optimized conditions ensured no loss of mass-balance at these enhanced reduction potentials (|E_cell| = ca. 3.4–3.7 V for alkyl substrates vs. ca. 2.3–2.7 V for acetophenones and indoles). Finally, we tested the conditions on trifluoroacetamide 1as, thioester 1at and imines 1au and 1av. For each of these, the corresponding product was returned in moderate to good yields. Despite some complications in their isolation, these results are notable considering their difference in structure and lack of precedent. Unsuccessful substrates included a nitro-substituted indole, which was insoluble in the reaction medium, and hydrated TFMKs.⁴⁰We tested a variety of substrates with the Mg-mediated conditions reported by Prakash to gauge the level of complementary between the methods.³⁰ While acetophenone derivatives 1k and 1am were amenable to reduction with Mg, bromide substitution in 1b was unsurprisingly not tolerated with Grignard formation dominating. Indoles – 1a, 1ai, pyrazole – 1an, alkyl – 1aq, 1ar and anilide – 1as based trifluoromethylketones were untouched by Mg in all cases, with starting materials recovered only.To explore the value of the DFMK moiety in synthesis, we derivatized it in a variety of ways, Fig. 4. Resubjecting the product 3a to our non-protic hydrodefluorination conditions led to monofluorinated product 4, providing an alternative to the use of electrophilic fluorine sources.⁵⁰ Reduction of the ketone in 3ae to the methyl ether and alcohol successfully gave products, 5 and 6, respectively. The dithiane of 3a, which is a useful synthetic intermediate, was formed in excellent yield (7). A Corey–Chaykovsky methenylation gave epoxide 8 in good yield. A Horner–Wadsworth–Emmons reaction transformed the carbonyl to give alkene 9. Nucleophilic attack of the ketone was demonstrated with a trifluoromethylation reaction to give highly fluorinated alcohol 10. Orthogonal reactivity was also demonstrated with a Suzuki–Miyaura cross-coupling that gave biaryl 11. Interestingly, deuterium was not exchanged into 3a when stirred in a mixture of D₂O and MeCN, providing evidence for a less favourable enolization.Open in a separate windowFig. 4[A] Derivatization of DFMKs. X = H (3a) for 4, 7, and 8, X = Br (3ae) for others; [B] H-bond strength (A-value) correlated to σ_m Hammett parameter; [C] intermolecular H-bond revealed in X-ray crystal structure of 3ae; [D] DFT calculated (B3LYP/6-311+g(d)) relative energies of conformers with rotation around HC–CO bond. Brown arrows indicate direction of dipole.The H-bond strength (A-value) was measured for a series of phenyl substituted X–CF₂H derivatives using the NMR method from Abraham, Fig. 4B.^51–53 These experiments confirmed the sensitivity of the H-bonding ability to the identity of X. DFMK 3g and sulfoxide–CF₂H were found to be comparable H-bond donors, which were only marginally less than the sulfone–CF₂H. The H-bond strength correlated best with the σ_m parameter, reflecting the strong influence of inductive effects. Multiple regression analysis showed that any contribution of σ_p was statistically insignificant (P value = 0.33).Analysis of the X-ray crystal structure of 3ae, showed an inter-molecular H-bond between the CF₂H and a carbonyl from a neighbouring molecule (Fig. 4C). DFT was used to calculate the relative conformer energy with rotation about the (O)C–CF₂H dihedral bond (Fig. 4D). The lowest energy conformer eclipsed the H with the carbonyl, implying the possibility of an energy lowering intra-molecular H-bond. However, analysis of the other derivatives in the set (C(O)CH₃, C(O)CFH₂ and C(O)CF₃) revealed that the alignment of dipoles was the dominant effect (brown arrows, Fig. 4D).⁴⁰ The absence of an unusually low or even negative A-value also provides evidence against an intramolecular H-bond.⁵¹ Interestingly, in the solid-state structure (Fig. 4C), the highest energy conformer (with dipoles aligned) is adopted, highlighting the stronger propensity of this moiety to engage in H-bonding interactions.In conclusion, we have developed a mono-selective hydrodefluorination to access a broad scope of DFMKs, enabled by non-protic electrochemical conditions at deeply reducing potentials. These moieties have been studied and diversified and reveal themselves to be potentially useful dual H-bond donor/acceptor moieties. This is especially interesting considering the structurally related trifluoromethylketones are known reversible protease inhibitors;^54,55 thus, the additional H-bonding moiety could enhance interaction within enzymatic active sites.¹⁵     

Simplifying and expanding the scope of boron imidazolate framework (BIF) synthesis using mechanochemistry

Mechanochemistry enables rapid access to boron imidazolate frameworks (BIFs), including ultralight materials based on Li and Cu(i) nodes, as well as new, previously unexplored systems based on Ag(i) nodes. Compared to solution methods, mechanochemistry is faster, provides materials with improved porosity, and replaces harsh reactants (e.g. n-butylithium) with simpler and safer oxides, carbonates or hydroxides. Periodic density-functional theory (DFT) calculations on polymorphic pairs of BIFs based on Li⁺, Cu⁺ and Ag⁺ nodes reveals that heavy-atom nodes increase the stability of the open SOD-framework relative to the non-porous dia-polymorph.

Mechanochemistry enables rapid access to boron imidazolate frameworks (BIFs), including ultralight materials based on Li and Cu(i) nodes, as well as new, previously unexplored systems based on Ag(i) nodes.

Mechanochemistry^1–7 has emerged as a versatile methodology for the synthesis and discovery of advanced materials, including nanoparticle systems^8–10 and metal–organic frameworks (MOFs),^11–15 giving rise to materials that are challenging to obtain using conventional solution-based techniques.^16–18 Mechanochemical techniques such as ball milling, twin screw extrusion¹⁹ and acoustic mixing^20,21 have simplified and advanced the synthesis of a wide range of MOFs, permitting the use of simple starting materials such as metal oxides, hydroxides or carbonates,^22,23 at room temperature and without bulk solvents, yielding products of comparable stability and, after activation, higher surface areas than solution-generated counterparts.^24–29 The efficiency of mechanochemistry in MOF synthesis was recently highlighted by accessing zeolitic imidazolate frameworks (ZIFs)^30,31 that were theoretically predicted, but not accessible under conventional solution-based conditions.¹⁷The advantages of mechanochemistry in MOF chemistry led us to address the possibility of synthesizing boron imidazolate frameworks (BIFs),^32–34 an intriguing but poorly developed class of microporous materials analogous to ZIFs, comprising equimolar combinations of tetrahedrally coordinated boron(iii) and monovalent Li⁺ or Cu⁺ cations as nodes (Fig. 1A–C). Although BIFs offer an attractive opportunity to access microporous MOFs with lower molecular weights, particularly in the case of “ultralight” systems based on Li⁺ and B(iii) centers, this family of materials has remained largely unexplored – potentially due to the need for harsh synthetic conditions, including the use of n-butyllithium in a solvothermal environment.^32–34Open in a separate windowFig. 1Structures of previously reported BIFs with: (A) zni-, (B) dia-, or (C) SOD-topology (M = Li, Cu); (D) tetrakis(imidazolyl)boric acids used herein for mechanochemical BIF synthesis; and (E) schematic representation of the herein developed mechanosynthesis of dia- and SOD BIF polymorphs based on Li, Cu or Ag metal nodes.We now show how switching to the mechanochemical environment enables lithium- and copper(i)-based BIFs to be prepared rapidly (i.e., within 60–90 minutes), without elevated temperatures or bulk solvents, and from readily accessible solid reactants, such as hydroxides and oxides (Fig. 1D and E). While the mechanochemically-prepared BIFs exhibit significantly higher surface areas than the solvothermally-prepared counterparts, mechanochemistry allows for expanding this class of materials towards previously not reported Ag⁺ nodes. The introduction of BIFs isostructural with those based on Li⁺ or Cu⁺ but comprising of Ag⁺ ions, enables a periodic density-functional theory (DFT) evaluation of their stability. This reveals that switching to heavier elements as tetrahedral nodes improves the stability of sodalite topology (SOD) open BIFs with respect to close-packed diamondoid (dia) topology polymorphs.As a first attempt at mechanochemically synthesis of BIFs, we targeted the synthesis of previously reported zni-topology LiB(Im)₄ and CuB(Im)₄ frameworks (Li-BIF-1 and Cu-BIF-1, respectively, Fig. 1A) using a salt exchange reaction between LiCl or CuCl with commercially available sodium tetrakis(imidazolyl)borate (Na[B(Im)₄]) (Fig. 2A). Milling of LiCl and Na[B(Im)₄] in a 1 : 1 stoichiometric ratio for up to 60 minutes led to the appearance of Bragg reflections consistent with the target Li-BIF-1 (CSD MOXJEP) and the anticipated NaCl byproduct. The reaction was, however, incomplete, as seen by X-ray reflections of Na[B(Im)₄] starting material. In order to improve reactant conversion, we explored liquid-assisted grinding (LAG), i.e. milling in the presence of a small amount of a liquid phase (measured by the liquid-to-solid ratio η³⁵ in the range of ca. 0–2 μL mg⁻¹). Using LAG conditions with acetonitrile (MeCN, 120 μL, η = 0.5 μL mg⁻¹) led to the complete disappearance of reactant X-ray reflections, concomitant with the formation of Li-BIF-1 alongside NaCl within 60 minutes.Open in a separate windowFig. 2(A) Reaction scheme for the mechanochemical synthesis of Li-BIF-1 by a salt metathesis strategy. Selected PXRD patterns for: (B) Na[B(Im)₄] (C) LiCl, (D) simulated Li-BIF-1 (CSD MOXJPEP) and (E) synthesized BIF-1-Li by LAG for 60 minutes with MeCN (η = 0.5 μL mg⁻¹), (F) CuCl, (G) simulated Cu-BIF-1 (CSD MOXJIT), and (H) synthesized BIF-1-Cu by LAG for 60 minutes with MeOH (η = 0.50 μL mg⁻¹). Asterisks denote NaCl, a byproduct of the metathesis reaction. (Fig. 2B–E, also see ESI^†). The copper-based zni-CuB(Im)₄ (Cu-BIF-1) was readily obtained from CuCl within 60 minutes using similar LAG conditions. We also explored LAG with methanol (MeOH), revealing that the exchange reaction to form NaCl took place with both LiCl and CuCl starting materials. With LiCl, however, the PXRD pattern of the product could not be matched to known phases involving Li⁺ and B(Im)₄⁻ (see ESI^†). With CuCl as a reactant, LAG with MeOH (η = 0.5 μL mg⁻¹) cleanly produced Cu-BIF-1 alongside NaCl (see ESI^†).Next, we explored an alternative synthesis approach, analogous to that previously used to form ZIFs and other MOFs: an acid–base reaction between a metal oxide or hydroxide and the acid form of the linker: tetrakis(imidazolato)boric acid, HB(Im)₄ (Fig. 3A).^36–40 Neat milling LiOH with one equivalent of HB(Im)₄ in a stainless steel milling assembly led to the partial formation of Li-BIF-1, as evidenced by PXRD analysis (see ESI^†). Complete conversion of reactants into Li-BIF-1 was achieved in 60 minutes by LAG with MeCN (η = 0.25 μL mg⁻¹), as indicated by PXRD analysis (Fig. 3B–E), Fourier transform infrared attenuated total reflectance spectroscopy (FTIR-ATR), thermogravimetric analysis (TGA) in air, and analysis of metal content by inductively-coupled plasma mass spectrometry (ICP-MS) (see ESI^†).Open in a separate windowFig. 3(A) Reaction scheme for the mechanochemical synthesis of Li-BIF-1 using the acid–base strategy. Selected PXRD patterns for: (B) H[B(Im)₄] (C) LiOH, (D) simulated Li-BIF-1 (CSD MOXJPEP), (E) synthesized BIF-1-Li by LAG for 60 minutes with MeCN (η = 0.25 μL mg⁻¹), (F) Cu₂O, (G) simulated Cu-BIF-1 (CSD MOXJIT), and (H) synthesized Cu-BIF-1 by ILAG for 60 minutes with MeOH (η = 0.50 μL mg⁻¹) and NH₄NO₃ additive (5% by weight).Neat milling of HB(Im)₄ with Cu₂O under similar conditions gave a largely non-crystalline material, as evidenced by PXRD (see ESI^†). Switching to the ion- and liquid-assisted grinding (ILAG) methodology, in which the reactivity of a metal oxide is enhanced by a small amount of a weakly acidic ammonium salt, and which was introduced to prepare zinc and cadmium ZIFs from respective oxides,^37–40 enabled the synthesis of Cu-BIF-1 from Cu₂O. Specifically, PXRD analysis revealed complete disappearance of the oxide in samples obtained by ILAG with either MeOH or MeCN (η = 0.5 μL mg⁻¹) in the presence of NH₄NO₃ additive (5% by weight, see ESI^†). Notably, achieving complete disappearance of Cu₂O reactant signals also required switching from stainless steel to a zirconia-based milling assembly, presumably due to more efficient energy delivery.⁴¹ After washing with MeOH, the material was characterized by FTIR-ATR, TGA in air, and analysis of metal content by ICP-MS (see ESI^†).Whereas both the metathesis and acid–base approaches can be used to mechanochemically generate Li- and Cu-BIF-1, the latter approach has a clear advantage of circumventing the formation of the NaCl byproduct. Consequently, in order to further the development of mechanochemical routes to other BIFs, we focused on the acid–base strategy. As next targets, we turned to MOFs based on tetrakis(2-methylimidazole)boric acid H[B(Meim)₄],³⁶ previously reported³² to adopt either a non-porous diamondoid (dia) topology (BIF-2) or a microporous sodalite (SOD) topology (BIF-3) with either Li⁺ or Cu⁺ as nodes (Fig. 4). Attempts to selectively synthesize either Li-BIF-2 or Li-BIF-3 by neat milling or LAG (using MeOH or MeCN as liquid additives) with LiOH and a stoichiometric amount of HB(Meim)₄ were not successful. Exploration of different milling times and η-values produced only mixtures of residual reactants with Li-BIF-2, Li-BIF-3, and/or not yet identified phases (see ESI^†). Consequently, we explored milling in the presence of 2-aminobutanol (amb), which is a ubiquitous component of solvent systems used in the solvothermal syntheses of BIFs.^32,33 Gratifyingly, using a mixture of amb and MeCN in a 1 : 3 ratio by volume as the milling liquid led to an effective strategy for the selective synthesis of both the dia-topology Li-BIF-2 (CSD code MOXKUG), and the SOD-topology Li-BIF-3 (CSD code MUCLOM).^‡ The selective formation of phase-pure samples of Li-BIF-2 and Li-BIF-3 was confirmed by PXRD analysis, which revealed an excellent match to diffractograms simulated based on the previously reported structures (Fig. 4B–G). Systematic exploration of reaction conditions, including time (between 15 and 60 minutes) and η value (between 0.25 and 1 μL mg⁻¹) revealed that the open framework Li-BIF-3 is readily obtained at η either 0.75 or 1 μL mg⁻¹ after milling for 45 minutes or longer (Fig. 4B–G, also see ESI^†).^§ Lower η-values of 0.25 and 0.5 μL mg⁻¹ preferred the formation of the dia-topology Li-BIF-2, which was obtained as a phase-pure material upon 60 minutes milling at η = 0.5 μL mg⁻¹, following the initial appearance of a yet unidentified intermediate. The preferred formation of Li-BIF-2 at lower η-values is consistent with our previous observations that lower amounts of liquid promote mechanochemical formation of denser MOF polymorphs.³⁷Open in a separate windowFig. 4(A) Reaction scheme for the mechanochemical synthesis of Li-BIF-3. Comparison of selected PXRD patterns for the synthesis of Li-BIF-2 and Li-BIF-3: (B) H[B(Meim)₄] reactant; (C) LiOH reactant; (D) simulated for Li-BIF-3 (CSD MUCLOM); (E) simulated for Li-BIF-2 (CSD MOXKUG); (F) Li-BIF-3 mechanochemically synthesized by LAG for 60 minutes with a 1 : 3 by volume mixture of amb and MeCN (η = 1 μL mg⁻¹); and (G) Li-BIF-2 mechanochemically synthesized by LAG for 60 minutes with a 1 : 3 by volume mixture of amb and MeCN (η = 0.5 μL mg⁻¹). Comparison of selected PXRD patterns for the synthesis of Cu-BIF-2 and Li-BIF-3: (H) Cu₂O; (I) Cu-BIF-3 (CSD MOXJOZ); (J) Cu-BIF-2 (CSD MUCLIG); (K) Cu-BIF-3 mechanochemically synthesised by ILAG for 60 minutes using NH₄NO₃ ionic additive (5% by weight) and MeOH (η = 1 μL mg⁻¹); and (L) mechanochemically synthesised Cu-BIF-2 by ILAG for 90 minutes using NH₄NO₃ ionic additive (5% by weight) and MeOH (η = 0.5 μL mg⁻¹).Samples of both Li-BIF-2 and Li-BIF-3 after washing with MeCN were further characterized by FTIR-ATR, TGA in air, and analysis of metal content by ICP-MS (see ESI^†). Nitrogen sorption measurement on the mechanochemically obtained Li-BIF-3, after washing with MeCN and evacuation at 85 °C, revealed a highly microporous material with a Brunauer–Emmett–Teller (BET) surface area of 1010 m² g⁻¹ (Fig. 5A), which is close to the value expected from the crystal structure of the material (1200 m² g⁻¹, 32 For direct comparison with previous work,³² we also calculated the Langmuir surface area, revealing an almost 40% increase (1060 m² g⁻¹) compared to samples made solvothermally (762.5 m² g⁻¹) (Fig. 5A, inset).Experimental Brunauer–Emmett–Teller (BET) and Langmuir surface area (in m² g⁻¹) of mechanochemically synthesized SOD-topology BIFs, compared to previously measured and theoretically calculated values, along with average particle sizes (in nm) established by SEM and calculated energies (in eV) for all Li-, Cu-, and Ag-BIF polymorphs. The difference between calculated energies for SOD- and dia-polymorphs in each system is given as ΔE (in kJ mol⁻¹)

Lithium achieves sequence selective ring-opening terpolymerisation (ROTERP) of ternary monomer mixtures

Heteroatom-containing degradable polymers have strong potential as sustainable replacements for petrochemically derived materials. However, to accelerate and broaden their uptake greater structural diversity and new synthetic methodologies are required. Here we report a sequence selective ring-opening terpolymerisation (ROTERP), in which three monomers (A, B, C) are selectively enchained into an (ABA′C)_n sequence by a simple lithium catalyst. Degradable poly(ester-alt-ester-alt-trithiocarbonate)s are obtained in a M_n range from 2.35 to 111.20 kDa which are not easily accessible via other polymerisation methodologies. The choice of alkali metal is key to achieve high activity and to control the terpolymer sequence. ROTERP is mechanistically compatible with ring-opening polymerisation (ROP) allowing switchable catalysis for blockpolymer synthesis. The ROTERP demonstrated in this study could be the first example of an entirely new family of sequence selective terpolymerisations.

A sequence selective ring-opening terpolymerisation of epoxides with CS₂ and phthalic thioanhydride yielding poly(ester-alt-ester-alt-trithiocarbonates) is reported.

Synthetic polymers are now more in demand than ever before and looking at their annually increasing production, a polymer free society is at best a vague memory rather than a vision for the future.¹ As most commodity polymers are based on chemically inert aliphatic –C–C– backbones, most polymer waste shows unappreciable degradation with respect to the polymer''s time in application.^2,3 In answer to the ever-increasing amount of plastic pollution, much effort focuses on the exploration of new heteroatom containing polymers which, because of their more polar bonds making up the backbone, are more susceptible to degradation via physical, chemical and biochemical pathways and even facilitate new chemical recycling methods.^4–8 Besides, there is also a constant demand for entirely new materials to enable technological innovation making new methodologies to synthesise heteroatom containing polymers necessary.Arguably one of the most popular methods to make such polymers is the ring-opening polymerisation (ROP) of a heterocycle A.^9–11 These polymerise under release of their associated ring strain energy to make polymers (A)_n such as poly(thio)ethers, poly(thio)ester and poly(thio)carbonates, only to name a few. Early on it has been realised that in some cases the ROP of three or four-membered heterocycles A can be coupled to the insertion of typically heteroallenes or cyclic anhydrides B to generate alternating copolymers (AB)_n.^12–14 The underlying requirements for (AB)_n polymerisations are a combination of kinetic factors, i.e. monomer A inserting orders of magnitude faster into the active catalyst growing chain-bond than monomer B, and chemoselectivities, i.e. insertion of monomer A resulting in type A active catalyst growing chain-bond that does not show appreciable reactivity with A but only with B (and vice versa). Prominent examples of this alternating (AB)_n ring-opening copolymerisation (ROCOP) include CO₂/epoxide ROCOP yielding polycarbonates and cyclic anhydride/epoxide ROCOP yielding polyesters.^15–17 Sulfur analogous are also accessible such as polythiocarbonate from CS₂/(epoxide or thiirane) and polythioesters from thioanhydride/(epoxide or thiirane) ROCOP.^18–31 Such sulfur rich polymers are attractive high-refractive index materials that can show improved crystallinity and degradability over their all-oxygen analogues and in some cases enable chemical polymer to monomer recycling.^32–39Most relevant to this study is a report by Werner and coworkers on lithium alkoxide catalysed CS₂/epoxide ROCOP yielding poly(monothio-alt-trithiocarbonate)s featuring R–O–C( S)–O–R and R–S–C( S)–S–R links (Fig. 1).^40,41 Such a polymer sequence is unexpected, as the formal product of alternating insertion would be a poly(dithiocarbonate) with R–O–C( S)–S–R links. Furthermore, the polymer shows an unusual “head-to-head-alt-tail-to-tail” selectivity meaning that the R–O–C( S)–O–R links sit adjacent to the tertiary CHR₃ positions of the ring opened epoxide (i.e. “head” position) and that the R–S–C( S)–S–R links sit adjacent to the secondary CH₂R₂ position of the ring opened epoxide (i.e. “tail” position). This sequence let the authors postulate a mechanism involving tail-selective epoxide ring-opening by a dithiocarbonate chain end which is formed by CS₂ insertion into an alkoxide intermediate. The resulting alkoxide intermediate was proposed to backbite into the adjacent dithiocarbonate link which after a rearrangement process resulted in an O/S exchange of the chain end. The rearrangement transforms the alkoxide into a thiolate chain end and the adjacent dithiocarbonate R–O–C( S)–S–R into a monothiocarbonate R–O–C( S)–O–R. CS₂ insertion of the thiolate generates a trithiocarbonate R–S–C( S)–S–R which after epoxide insertion regenerates the alkoxides. In contrast to alkoxides sitting adjacent to R–O–C( S)–S–R links, alkoxides next to R–S–C( S)–S–R links were not proposed to undergo backbiting and O/S exchange. Importantly the initial regioselectivity of the epoxide ring-opening was preserved throughout the rearrangement which explained the “head-to-head-alt-tail-to-tail” selectivity. Interestingly lithium appeared to be crucial as other alkali metal alkoxides failed to catalyse this ROCOP, while more sophisticated catalysts result in much more uncontrolled polymer sequences. Hence it appears that the Li controls which alkoxide intermediate precisely undergoes O/S exchange and to which degree this rearrangement occurs, but the reasons behind the special role of Li remains to be explored. Relatedly the ROCOP of thioanhydrides with epoxides has also been reported and similar exchange processes have been proposed as side reactions.²³ Although not directly proven, this mechanism seemed reasonable and let us hypothesise that lithium catalysts could grant a general access to control the O/S exchange process in ROCOP and even in the polymerisation of ternary monomer mixtures. Furthermore, we reasoned that the two distinct chain ends formed via O/S exchange, i.e. alkoxide and thiolate (type A vide supra), could enable discrimination between two different type B monomers and enable sequence selective terpolymerisations. It should be noted that reports exist in which mixtures of A, B and C (e.g. epoxide A, cyclic anhydride B and CO₂ C) either yield random terpolymers, (AB)_n-ran-(AC)_m poly(esters-ran-carbonate), or block-terpolymers, (AB)_n-b-(AC)_m, polyester-b-polycarbonate. In this case the monomer sequence depends on catalyst selection and reaction conditions, but sequence selective terpolymers, e.g. (ABC)_n or (ABAC)_n, are unknown.^42–48 The hypothesis of O/S exchange here led us to discover a new type of polymerisation, sequence selective ring-opening terpolymerisation (ROTERP) that we report in this contribution. ROTERP produces poly(ester-alt-ester-alt-trithiocarbonates), i.e. (ABA′C)_n sequences, from a mixture of the monosubstituted epoxides propylene oxide (PO) or butylene oxide (BO) A, phthalic thioanhydride (PTA) B and CS₂ C, employing simple lithium salts as the catalyst. Furthermore, model reactions proof the previously postulated O/S rearrangement that enable ROTERP and elucidate the role of the lithium catalyst. Finally, we employed ROTERP in so-called switchable catalysis, in which the onset of ROTERP stops the occurrence of ROP, for the construction of blockpolymers.Open in a separate windowFig. 1(Top) CS₂/epoxide ROCOP and postulated mechanism involving a central O/S exchange reaction, (middle) phthalic thioanhydride (PTA)/epoxide ROCOP and (bottom) PTA/CS₂/epoxide ROTERP reported in this study. R = Me, Et; [R_n] = polymer chain.ROTERP of mixtures of PTA, PO and CS₂ at loadings typically employed in ROCOP catalysis with lithium hexamethyldisilazide (LiHDMS) or lithium benzyloxide (LiOBn) as the catalyst at loadings in the range of 1 eq. LiX : (6.25–500 eq.) PTA : (31.25–2500 eq.) PO : (62.5–5000 eq.) CS₂ yield polymeric materials in 95% selectivity at 80 °C (see 40,47 Spectroscopic analysis of the isolated polymer reveals surprisingly clean NMR spectra given the potential for statistical terpolymerisation of these three monomers. The ¹H NMR spectrum (Fig. 2) shows two main aryl resonances for a symmetrically substituted terephthalate unit from ring opened PTA (δ = 7.72 and 7.56 ppm) as well as one main resonance for the CHMe (δ = 5.42 ppm; head position of the ring-opened epoxide) and CH₂ (δ = 3.90–3.40 ppm; tail position of the ring opened epoxide) groups respectively stemming from the ring opened PO. Correspondingly the ¹³C{¹H} NMR spectrum (ESI Fig. S1^†) reveals the almost exclusive presence of trithiocarbonate R–S–C( S)–S–R (δ = 222.8 ppm) and arylester R–C( O)–O–R (δ ∼166.6 ppm) resonances (94–98%) alongside minor thioester R–C( O)–S–R (δ = 192.7 ppm) resonances (2–6%). ¹H and 2D NMR spectra (ESI Fig. S3^†) show that trithiocarbonate units are positioned adjacent to CH₂ groups while arylesters are connected to the tertiary CHMe groups. The spectra remain unchanged after multiple precipitations from DCM : MeOH or THF : pentane and DOSY NMR shows that all ¹H NMR resonances diffuse at the same rate confirming that these are part of the same species. Furthermore, no other type of thiocarbonate R–(O/S)–C( O/S)–(O/S)–R are part of the polymer. Linkage identity was further substantiated by the ATR-IR spectrum (ESI Fig. S5^†) of these polymers showing an arylester C O stretch at = 1716 cm⁻¹ as well as a thiocarbonate C S stretch at = 1062 cm⁻¹ (ESI Fig. S5^†). Accordingly, the polymers are obtained as yellow solids due the presence of the C S chromophore (λ_abs = 435 nm, ESI Fig. S6^†). MALDI-TOF analysis unfortunately only led to decomposition of the materials and no signals could be identified as previously reported for sulfur-rich polymers.^26,38 Nevertheless ¹H NMR allows some conclusions regarding the topology as both for LiHMDS or LiOBn initiation, resonances for the HMDS and OBn groups can be identified to be part of the purified polymers. Insertion of alkalimetal alkoxides and amides into CS₂ yielding alkali dithiocarbonates and dithiocarbamates have been previously reported.^40,79 This makes initiation via CS₂ insertion likely which defines one end of the polymer and hence indicates that chains are linear rather than cyclic. As ROTERP is followed by CS₂/epoxide coupling once all PTA is consumed (vide infra) we infer that chains are terminated by CS₂ because heteroallene insertion products are generally established to be the resting states of heteroallene/heterocycle coupling reactions.¹²Data showing PTA/CS₂/epoxide ROTERP under different conditions

Illuminating anti-hydrozirconation: controlled geometric isomerization of an organometallic species

A general strategy to enable the formal anti-hydrozirconation of arylacetylenes is reported that merges cis-hydrometallation using the Schwartz Reagent (Cp₂ZrHCl) with a subsequent light-mediated geometric isomerization at λ = 400 nm. Mechanistic delineation of the contra-thermodynamic isomerization step indicates that a minor reaction product functions as an efficient in situ generated photocatalyst. Coupling of the E-vinyl zirconium species with an alkyne unit generates a conjugated diene: this has been leveraged as a selective energy transfer catalyst to enable E → Z isomerization of an organometallic species. Through an Umpolung metal–halogen exchange process (Cl, Br, I), synthetically useful vinyl halides can be generated (up to Z : E = 90 : 10). This enabling platform provides a strategy to access nucleophilic and electrophilic alkene fragments in both geometric forms from simple arylacetylenes.

A general strategy to enable the formal anti-hydrozirconation of arylacetylenes is reported that merges cis-hydrometallation using the Schwartz Reagent (Cp₂ZrHCl) with a subsequent light-mediated geometric isomerization at λ = 400 nm.

The venerable Schwartz reagent (Cp₂ZrHCl) is totemic in the field of hydrometallation,¹ where reactivity is dominated by syn-selective M–H addition across the π-bond.^2,3 This mechanistic foundation can be leveraged to generate well-defined organometallic coupling partners that are amenable to stereospecific functionalization. Utilizing terminal alkynes as readily available precursors,⁴ hydrozirconation constitutes a powerful strategy to generate E-configured vinyl nucleophiles that, through metal–halogen exchange, can be converted to vinyl electrophiles in a formal Umpolung process.⁵ Whilst this provides a versatile platform to access the electronic antipodes of the E-isomer, the mechanistic course of addition renders access to the corresponding Z-isomer conspicuously challenging. To reconcile the synthetic importance of this transformation with the intrinsic challenges associated with anti-hydrometallation and metallometallation,⁶ it was envisaged that a platform to facilitate geometric isomerization⁷ would be of value. Moreover, coupling this to a metal–halogen exchange would provide a simple Umpolung matrix to access both stereo-isomers from a common alkyne precursor (Fig. 1).Open in a separate windowFig. 1The stereochemical course of alkyne hydrometallation using the Schwartz reagent and an Umpolung platform to generate both stereo-isomers from a common alkyne precursor.Confidence in this conceptual blueprint stemmed from a report by Erker and co-workers, in which irradiating the vinyl zirconium species derived from phenyl acetylene (0.5 M in benzene) with a mercury lamp (Philips HPK 125 and Pyrex filter) induced geometric isomerization.⁸ Whilst Hg lamps present challenges in terms of safety, temperature regulation, cost and wavelength specificity, advances in LED technology mitigate all of these points. Therefore, a process of reaction development was initiated to generalize the anti-hydrozirconation of arylacetylenes. Crucial to the success of this venture was identifying the light-based activation mode that facilitates alkene isomerization. Specifically, it was necessary to determine whether this process was enabled by direct irradiation of the vinyl zirconium species, or if the E → Z directionality results from a subsequent selective energy transfer process involving a facilitator. Several accounts of the incipient vinyl zirconium species reacting with a second alkyne unit to generate a conjugated diene have been disclosed.^9,10 It was therefore posited that the minor by-product diene may be a crucial determinant in driving this isomerization (Fig. 2).Open in a separate windowFig. 2A working hypothesis for the light-mediated anti-hydrozirconation via selective energy transfer catalysis.To advance this working hypothesis and generalize the formal anti-hydrozirconation process, the reaction of Cp₂ZrHCl with 1-bromo-4-ethynylbenzene (A-1) in CH₂Cl₂ was investigated (‡ for full details). This generates a versatile electrophile for downstream synthetic applications. Gratifyingly, after only 15 minutes, a Z : E-composition of 50 : 50 was reached (entry 1) and, following treatment with NBS, the desired vinyl bromide (Z)-1 was obtained in 76% yield (isomeric mixture) over the two steps. Further increasing the irradiation by 15 minute increments (entries 2–4) revealed that the optimum reaction time for the isomerization is 45 minutes (74%, Z : E = 73 : 27, entry 3). Extending the reaction time to 60 minutes (entry 4, 54%) did not lead to an improvement in selectivity and this was further confirmed by irradiating the reaction mixture for 90 minutes (entry 5). In both cases, a notable drop in yield was observed and therefore the remainder of the study was performed using the conditions described in entry 3. Next, the influence of the irradiation wavelength on the isomerization process was examined (entries 6–11). From a starting wavelength of λ = 369 nm, which gave a Z : E-ratio of 27 : 73 (entry 6), a steady improvement was observed by increasing the wavelength to λ = 374 nm (Z : E = 44 : 56, entry 7) and λ = 383 nm (Z : E = 53 : 47, entry 8). The selectivity reached a plateau at λ = 400 nm, with higher wavelengths proving to be detrimental (Z : E = 60 : 40 at λ = 414 nm, entry 9; Z : E = 26 : 74 at λ = 435 nm, entry 10). It is interesting to note that at λ = 520 nm, Z-1 was not detected by ¹H NMR (entry 11).Reaction optimization^a

Pd/Cu-Catalyzed amide-enabled selectivity-reversed borocarbonylation of unactivated alkenes

The addition reaction between CuBpin and alkenes to give a terminal boron substituted intermediate is usually fast and facile. In this communication, a selectivity-reversed procedure has been designed and established. This selectivity-reversed borocarbonylation reaction is enabled by a cooperative action between palladium and copper catalysts and proceeds with complete regioselectivity. The key to the success of this transformation is the coordination of the amide group and slower CuBpin formation by using KHCO₃ as the base. A wide range of β-boryl ketones were produced from terminal unactivated aliphatic alkenes and aryl iodides. Further synthetic transformations of the obtained β-boryl ketones have been developed as well.

A selectivity-reversed borocarbonylation reaction has been developed with complete regioselectivity.

The catalytic borocarbonylation of alkenes represents a novel synthetic tool for the simultaneous installation of boron and carbonyl groups across alkenes, enabling rapid construction of molecules with high complexity from abundant alkenes. In particular, the obtained organoboron compounds are versatile synthetic intermediates that can be readily converted into a wide range of functional groups with complete stereospecificity.¹ Consequently, several catalytic systems have been developed to diversify the molecular frameworks through carbonylative borofunctionalization.² In general, carbonylative borofunctionalization of alkenes proceeds via an alkyl-copper intermediate, which was produced by the addition of CuBpin to the terminal position of the alkene starting material,³ followed by CO insertion and other related steps. A new C–B bond is formed at the terminal position of the alkene and a carbonyl group has been installed at the β-position simultaneously (Scheme 1a). However, in contrast to the progress in the borocarbonylation, a selectivity-reversed procedure (the boryl group is installed at the internal position) to give β-boryl ketone products is still unprecedented.Open in a separate windowScheme 1Strategies for borocarbonylation of activated alkenes.Recently, several attractive strategies have emerged for the borofunctionalization of unactivated alkenes to give β-boryl products.^4–7 In 2015, Fu, Xiao and their co-workers established a copper-catalyzed regiodivergent alkylboration of alkenes.^4a In the same year, Miura and Hirano''s group reported a copper-catalyzed aminoboration of terminal alkenes.^4b In these two attractive procedures, the regioselectivity was controlled by the ligand applied. More recently, an intermolecular 1,2-alkylborylation of alkenes was described by Ito''s research group.⁵ A radical-relay strategy was used to achieve the targeted regioselective addition. Furthermore, Engle and co-workers explored a palladium-catalyzed 1,2-carboboration and -silylation reaction of alkenes.⁶ Stereocontrol can be achieved in this new procedure with the assistance of a chiral auxiliary which is a coordinating group in this case.Inspired by these pioneering studies, we assumed that if the reaction could be initiated by the insertion of an acylpalladium complex into alkenes, followed by transmetalation with CuBpin before reductive elimination, β-boryl ketones can finally be produced (Scheme 1b). However, due to the inherent reactivity of the palladium species toward alkenes, olefin substrates were usually restricted to styrenes and a large excess of them is typically required (>6 equivalents).^8,9 Therefore, the critical part of the reaction design is to promote the reaction of the acylpalladium intermediate with alkenes faster than the insertion of CuBpin into olefins. One of the ideas is taking advantage of the coordinating group to transform the reaction from intermolecular to intramolecular. Among the developed directing groups,¹⁰ 8-aminoquinoline (AQ) is interesting and has been relatively well studied by various groups in a number of novel transformations.^11–13 Although the AQ directing group contains a NH group which can participate in intramolecular C–N bond formation,¹⁴ we believe that the selectivity-reversed borocarbonylation of alkenes can potentially be achieved through cooperative Pd/Cu catalysis. Then, valuable β-boryl ketones can be produced from readily available substrates directly and effectively.To test the viability of our design on selectivity-reversed borocarbonylation of alkenes, N-(quinolin-8-yl)pent-4-enamide (1a), iodobenzene (2a), and bis(pinacolato)diboron (B₂pin₂) were chosen as model substrates for systematic studies. As shown in 15 In the testing of palladium precursors, allylpalladium chloride dimer proved to be the best palladium catalyst for this reaction, affording 3a in 41% yield (†) and tend to generate the by-product β-aminoketone. Xantphos was found to be superior to the other tested bidentate ligands ( Entry[Pd]LigandCuBaseYield of 3a (%)1Pd(TFA)₂ L1 IMesCuClK₂CO₃292Pd(OAc)₂ L1 IMesCuClK₂CO₃343[Pd(η³-C₃H₅)Cl]₂ L1 IMesCuClK₂CO₃414[Pd(cinnamyl)Cl]₂ L1 IMesCuClK₂CO₃365[Pd(η³-C₃H₅)Cl]₂ L1 IPrCuClK₂CO₃06[Pd(η³-C₃H₅)Cl]₂ L1 CuClK₂CO₃337[Pd(η³-C₃H₅)Cl]₂ L1 CuBrK₂CO₃418[Pd(η³-C₃H₅)Cl]₂ L1 CuIK₂CO₃509[Pd(η³-C₃H₅)Cl]₂ L2 CuIK₂CO₃3810[Pd(η³-C₃H₅)Cl]₂ L3 CuIK₂CO₃4711[Pd(η³-C₃H₅)Cl]₂ L4 CuIK₂CO₃012[Pd(η³-C₃H₅)Cl]₂ L5 CuIK₂CO₃013[Pd(η³-C₃H₅)Cl]₂ L6 CuIK₂CO₃<214[Pd(η³-C₃H₅)Cl]₂ L7 CuIK₂CO₃1015[Pd(η³-C₃H₅)Cl]₂ L8 CuIK₂CO₃1216[Pd(η³-C₃H₅)Cl]₂ L1 CuIKHCO₃58 (51)^b17[Pd(η³-C₃H₅)Cl]₂ L1 CuIK₂HPO₄2618[Pd(η³-C₃H₅)Cl]₂ L1 CuINaHCO₃019[Pd(η³-C₃H₅)Cl]₂ L1 CuINaO^tBu1120^c[Pd(η³-C₃H₅)Cl]₂ L1 CuIKHCO₃<521[Pd(η³-C₃H₅)Cl]₂ L7 CuIKHCO₃40 Open in a separate window^aAll reactions were carried out on a 0.1 mmol scale with alkene (0.1 mmol) and aryl iodide (2.0 equiv.). Yields were determined by ¹H NMR analysis of the crude reaction mixture using 1,3,5-trimethoxybenzene as the internal standard.^bIsolated yield.^cXantphos (10 mol%).With the optimized reaction conditions in hand, we examined the scope of this selectivity-reversed borocarbonylation with various unactivated alkenes and aryl iodides toward the synthesis of β-boryl ketones ( C bond even when there are two C C bonds in the amide substrates (4i and 4j). In addition, sterically hindered 4-pentenoic amide was subjected to the optimized reaction conditions, and the corresponding product was formed in 42% yield (4k). Furthermore, mono-substitution at the β-position of 4-pentenoic amides could also be employed, affording the corresponding products in moderate yields (4l and 4m). Iodoarenes containing more complex substrates such as L-menthol, L-borneol, vitamin E, diacetonfructose and nerol were also competent substrates and gave moderate to good yields of the corresponding products. Finally, no desired product could be detected when 3-butenoic amide, 2-vinylbenzamide or internal alkene was tested under our standard conditions.Substrate scope for the synthesis of β-boryl ketones^aOpen in a separate window^aAll reactions were carried out on a 0.1 mmol scale. Alkenes (0.1 mmol), aryl iodides (2.0 equiv.), B₂pin₂ (1.5 equiv.), CuI (10 mol%), [Pd(η³-C₃H₅)Cl]₂ (2.5 mol%), xantphos (5 mol%), KHCO₃ (2.0 equiv.), CO (10 bar), and DMSO (0.2 M) were stirred at 70 °C for 18 h. The dr value given was determined by ¹H NMR.To demonstrate the synthetic utilities of the obtained borocarbonylation products, a series of further synthetic transformations of the β-boryl ketones were performed (Scheme 2). From a practical point of view, the reaction can be easily performed on the gram-scale and gave the target product 3m in 67% yield. β-Hydroxyl ketone 6a (CCDC: 2079475;^† determined by X-ray crystallography and the ORTEP drawing with 50% thermal ellipsoids) was produced in 95% yield by oxidation of the parent β-boryl ketone 3a. Furthermore, the C–B bond can be easily converted into a C–N bond, affording β-aminoketone 6b in 60% yield. Upon the reduction reaction of 3m with NaBH₄, the corresponding reduced oxaborole amide 6c could be isolated in 70% yield. Finally, a two-step transamination process was performed to remove the AQ group.¹⁶Open in a separate windowScheme 2Diversification of β-boryl ketones.To gain some insight into the mechanism of this selectivity-reversed borocarbonylation of alkenes, several control experiments were performed. The target product 3a was not formed, instead byproduct 6b was obtained in 40% yield, in the case without xantphos. Possible explanations for this result are: (i) the bidentate directing group AQ increases the stability of Pd(ii) species and promotes the carbonylation step; (ii) the role of xantphos is to coordinate to C(sp³)–Pd(ii) species after its formation and inhibit the formation of the C–N bond to give byproduct 6b (Scheme 3a). In addition, copper and B₂pin₂ were proven to be important, and KHCO₃ was essential for the carbonylation step (Scheme 3b). Analysis of the copper system in the absence of palladium and iodobenzene revealed that alkenes failed to undergo CuBpin insertion under this condition and no hydroboration products could be detected after work-up (Scheme 3c). Additionally, alkenes without the directing group were also tested under our standard conditions, and no reaction occurred.Open in a separate windowScheme 3Control experiments.Although we did not observe compound 7a during our optimization and substrate scope processes, even after stopping the reaction after 8 hours, we tested the possibility that 7a might act as an intermediate. When 7a was subjected to this transformation, the product 3a was delivered in 24% yield and 6b was generated in 37% (Scheme 3d). No significant difference in the yield outcome was observed when xantphos was added. Additionally, in our deuterated substrate testing, the amount of the deuterated product obtained is lower than the theoretical value (Scheme 3e). Thus, a pathway of β-H elimination followed by hydroboration could be involved as well. However, we believe the direct reaction between palladium and copper intermediates is the main one for this procedure due to the proven importance of the AQ group and the known achievements of copper-catalyzed hydroboration of enones, even with enantioselective versions.¹⁷On the basis of the above results and related literature studies,^7,11–14 a possible reaction pathway is proposed (Scheme 4). Initially, the AQ directing group coordinates with Pd⁰, which produces the active AQ-Pd⁰ catalyst I. This is followed by oxidative addition to aryl iodides to generate Pd^II species II, and then by base promoted iodine dissociation to form complex III. After the CO insertion step, the acyl-Pd^II species IV coordinates with the alkene and undergoes migratory insertion to generate C(sp³)–Pd^II intermediate V, which is stabilized by the xantphos ligand and AQ directing group. Subsequently, C(sp³)–Pd^II complex V reacts especially with CuBpin to give the desired product β-boryl ketone and regenerate the Pd(0) complex. Finally, ligand exchange of Pd⁰Ln regenerates AQ-Pd⁰I for the next catalytic cycle. Additionally, another minor pathway that involves the carbonylative Heck reaction to give an enone derivative, followed by its hydroboration to give the final product could be included as well.Open in a separate windowScheme 4Proposed catalytic cycle.In summary, a novel Pd/Cu catalyzed amide-directed selectivity-reversed borocarbonylation for the selective synthesis of β-boryl ketones from terminal alkenes has been developed. Various aryl iodides and aliphatic alkenes were transformed into the desired β-boryl ketones in moderate to excellent yields. In this catalyst system, the assistance from the AQ directing group is essential for successful reaction design.     

Ligand-dependent,palladium-catalyzed stereodivergent synthesis of chiral tetrahydroquinolines

The most fundamental tasks in asymmetric synthesis are the development of fully stereodivergent strategies to access the full complement of stereoisomers of products bearing multiple stereocenters. Although great progress has been made in the past few decades, developing general and practical strategies that allow selective generation of any diastereomer of a reaction product bearing multiple stereocentres through switching distinct chiral catalysts is a significant challenge. Here, attaining precise switching of the product stereochemistry, we develop a novel P-chirogenic ligand, i.e.YuePhos, which can be easily derived from inexpensive and commercially available starting materials in four chemical operations. Through switching of three chiral ligands, an unprecedented ligand-dependent diastereodivergent Pd-catalyzed asymmetric intermolecular [4 + 2] cycloaddition reaction of vinyl benzoxazinanone with α-arylidene succinimides was developed. This novel method provides an efficient route for the stereodivergent synthesis of six stereoisomers of pyrrolidines bearing up to three adjacent stereocenters (one quaternary center). Despite the anticipated challenges associated with controlling stereoselectivity in such a complex system, the products are obtained in enantiomeric excesses ranging up to 98% ee. In addition, the synthetic utilities of optically active hexahydrocarbazoles are also shown.

An unprecedented ligand-dependent stereodivergent Pd-catalyzed asymmetric intermolecular [4 + 2] cycloaddition reaction of vinyl benzoxazinanone with α-aryliene succinimides was developed.

The chirality of a biologically active molecule can alter its physiological properties. Therefore, highly efficient access to and fully characterizing all possible stereoisomers of a chiral molecule is one of the fundamental challenges in organic synthesis, drug discovery and development processes. However, most asymmetric catalytic transformations afford products enantioselectively and diastereoselectively and only form one of the stereoisomers containing multiple stereocenters. Stereodivergent access to all possible stereoisomers of the products is incredibly difficult because diastereochemical preference is largely dominated by the inherent structural and stereoelectronic characteristics of substrates, while absolute conformation can be dictated by the choice of the chiral catalyst.¹ In 2013, Carreira and co-workers addressed this limitation by introducing the concept of stereodivergent dual-catalytic synthesis, reporting the allylation of aldehydes in a diastereodivergent fashion by the synergistic reactivity of iridium and amine catalysts under acidic conditions.² Soon after, Carreira,³ Zhang,⁴ Hartwig,⁵ Dong,⁶ Wang,⁷ Zi,⁸ Lee,⁹ and other groups¹⁰ reported using an appropriate combination of dual chiral catalysts in a series of elegant studies (Scheme 1A). Recently, chemists found, in some cases, that tuning non-chiral parameters, including solvents or additives, also controlled the stereochemical outcomes through subtle perturbation of the key diastereomeric transition states.¹¹ In 2018, You and co-workers reported a solvent-controlled palladium-catalyzed enantioselective dearomative formal [3 + 2] cycloaddition, affording stereodivergent synthesis of two diastereomeric tetrahydrofuroindoles.¹² However, a rapid and predictable way to access complete stereoisomers of products bearing multiple stereocentres (for example, three contiguous stereocentres) remains an unsolved challenge through switching of ligands. To the best of our knowledge, only two successful examples were reported by Buchwald and Zhang, in which eight stereoisomers were obtained through tuning catalysts and reactive substrates (Scheme 1B).^4a,13Open in a separate windowScheme 1Strategy for stereodivergent synthesis of different stereoisomers.In metal-catalyzed reactions, ligands can manipulate the reactivity and selectivity by affecting the steric and electronic properties of metal catalysts. Therefore, the design and development of new ligands to improve the utility, activity and selectivity of their related metal catalysts are greatly desired by organic chemists. Recently, our groups have synthesized a new and promising class of P-chiral ligands ZD-Phos (including Ganphos and Jiaphos), and their conformational rigidity and chemical robustness have endowed the structure and its variants with outstanding activity and selectivity as well as excellent stereocontrol features essential to asymmetric cycloaddition reactions.¹⁴ Inspired by these advances, we are interested in continuing the development of P-chiral ligands with new structural motifs in the search for new reactivity and selectivity to tackle current synthetic challenges. More recently, Sadphos has emerged as another superior chiral skeleton, owing to the pioneering contributions by Zhang.¹⁵ Thus its aminophosphine scaffold is envisaged to be introduced into our 1-phosphanorbornene framework (ZD-Phos).¹⁶ We aim to combine the advantages of the aforementioned two types of chiral motifs, thus developing a novel P,P-bidentate ligand. Thus the novel P-chiral ligands, called Yuephos, may show unique stereoselectivity in a metal-catalyzed asymmetric cycloaddition reaction (Fig. 1).Open in a separate windowFig. 1Design of the Yuephos framework.Tetrahydroquinolines are important molecular skeletons that widely occur in natural molecules, pharmaceuticals, and functional materials. For this reason, realizing stereodivergent synthesis of all stereoisomers of fully substituted tetrahydroquinolines has been an important and challenging task in organic synthesis. However, to date, full control of absolute and relative stereochemical configuration of these molecules has remained an unmet synthetic challenge. Considering the potentiality of fully substituted chiral tetrahydroquinolines in drug discovery and stereodivergent synthesis,¹⁷ we envisioned that using our new palladium/ZD-Phos catalytic system may offer an efficient strategy for overcoming the challenges related to regio-, enantio-, and diastereo-selectivity. Herein, we report our studies on the unexplored stereodivergent synthesis of fully substituted tetrahydroquinolines through ligand-controlled, metal-catalyzed asymmetric annulation. Six possible stereoisomers bearing two tertiary and one quaternary stereocenters were easily synthesized in good yields with high enantio- and diastereo-selectivities from the same starting materials (Scheme 1C).The new bisphosphorus ligands we report herein can be easily synthesized by a two-pot method with good yields (Scheme 2). Starting from the corresponding aldehyde¹⁸ and commercially available chiral amine, one-pot sequential reaction gave diastereomers Y1 and Y1′ with 1 : 1 dr, which could be straightforwardly separated by column chromatography. The subsequent reduction using Raney Ni produced the final Yuephos in good yields. The absolute configuration of Yue-1′ was established by single crystal X-ray diffraction.¹⁹ Importantly, the ligands Yuephos can remain stable in air and moisture for more than one year.Open in a separate windowScheme 2Synthesis of Yuephos ligands.With new Yuephos ligands in hand, we began our study by choosing vinyl benzoxazinanone 1a with α-phenylidene succinimide 2a as the model substrate, combined with the Pd₂dba₃·CHCl₃/L complex as the catalyst. Details of [Pd] source and solvent screening can be found in the ESI (Table S1 and S2^†). Notably, using Pd₂dba₃·CHCl₃/Yuephos as the catalyst in ethyl acetate, the reaction proceeded smoothly, affording the desired product 3a in 69% yield with 96% ee and >20 : 1 dr (entry 1). It should be noted that Yuephos ligands were found to be efficient for this reaction, and the product 3a was obtained in good enantioselectivity with seemingly irregular yields and diastereoselectivities (entries 2–6). Trost''s ligand (L1) and chiral diphosphine ligand (L2) promoted the reaction with good diastereoselectivity but in a low yield and poor enantioselectivity (entries 7–8). However, (R)-SegPhos (L3) failed to afford the desired product (entry 9). To our surprise, when the phosphoramidite ligand (L4) was used, the diastereoselectivity was reversed compared to that in Yuephos (entry 10). Thus, a diastereodivergent phenomenon induced by the chiral ligand was discovered. To further improve the yield and selectivity, various solvents and [Pd] sources were screened (Table S3 and S4 in the ESI^†), and an obvious improvement in the enantioselectivity and diastereoselectivity was observed when using DCM as the solvent (entries 10 vs. 11). The reaction enantioselectivity was further increased to 92% with good yield (85%) when the reaction temperature was reduced to −20 °C (entries 12–14).With the optimal conditions established for (S, R, S)-3a (20Optimization of reaction conditions^a

Organocatalytic asymmetric formal oxidative coupling for the construction of all-aryl quaternary stereocenters

A new catalytic asymmetric formal cross dehydrogenative coupling process for the construction of all-aryl quaternary stereocenters is disclosed, which provides access to rarely explored chiral tetraarylmethanes with excellent enantioselectivity. The suitable oxidation conditions and the hydrogen-bond-based organocatalysis have enabled efficient intermolecular C–C bond formation in an overwhelmingly crowded environment under mild conditions. para-Quinone methides bearing an ortho-directing group serve as the key intermediate. The precise loading of DDQ is critical to the high enantioselectivity. The chiral products have also been demonstrated as promising antiviral agents.

A one-pot oxidation of racemic triarylmethanes to form para-quinone methides followed by enantioselective construction of all-aryl quaternary stereocenters has been developed.

Cross dehydrogenative coupling (CDC) is a powerful tool to forge intermolecular C–C bonds from two C–H bonds without prefunctionalization.¹ Specifically, the benzylic C–H bond is relatively prone to oxidation and thus it has evolved into a versatile arena for the implementation of this reaction, leading to efficient construction of various benzylic stereogenic centers. As a result, CDC has proved to be useful for the establishment of a wide range of 1,1-diaryl stereocenters (Scheme 1a).² Recently, Liu and coworkers reported a elegant synthesis of enantioenriched triarylacetonitriles via in situ oxidation of α-diarylacetonitriles to para-quinone methides (p-QMs) followed by asymmetric nucleophilic addition with stereocontrol induced by a chiral phosphoric acid catalyst. This represents a rare example of formal CDC for the synthesis of 1,1,1-triarylalkanes (Scheme 1b).³ However, the establishment of tetraaryl-substituted carbon stereocenters by this approach remains unknown (Scheme 1c).Open in a separate windowScheme 1Catalytic asymmetric synthesis of chiral tetraarylmethanes.Distinct from the asymmetric synthesis of triaryl-substituted stereocenters,⁴ substantial steric hindrance in establishing tetraaryl-substituted quaternary stereocenters poses significant synthetic challenges.^5–8 Indeed, even racemic or achiral syntheses of tetraarylmethanes have been an elusive topic of investigation in organic synthesis.⁶ In this context and in continuation of our effort in the studies of asymmetric reactions of para-quinone methides (p-QMs)^9,10 as well as the synthesis of chiral tetraarylmethanes,⁸ we envisioned that suitable oxidation of racemic triarylmethane 1 is expected to generate triarylmethyl cation IM1 (Scheme 1c). With one aryl group as para-hydroxyphenyl, this cation could be stabilized in the form of p-QM IM2. Subsequent asymmetric nucleophilic addition by another electron-rich arene to the p-QM intermediate is expected to generate chiral tetraarylmethanes 2. The challenges associated with this one-pot process mainly include the compatibility problem between the oxidative condition and the catalytic asymmetric system in order to achieve both high efficiency and enantioselectivity.We commenced our study with racemic triarylmethane 1a as the model substrate. The initial study was directed to the search for a suitable oxidant to mildly generate the p-QM intermediate (11 At room temperature, the use of superstoichiometric amounts of Ag₂O or benzoquinone was completely ineffective (entries 1 and 2). Similarly, the reaction did not proceed using oxygen as the oxidant in combination with catalyst Mn(acac)₃ (entry 3). Subsequently, considerable efforts were devoted to screening many other oxidation systems, almost all of which were completely incapable for this oxidation (entries 4–8). However, eventually we were delighted to identify DDQ as the superior oxidant, leading to complete and clean conversion to the desired QM at room temperature (entry 9). In contrast, a combination of catalytic DDQ with 5 equivalents of MnO₂ gave only 60% conversion (entry 10).Evaluation of oxidants

Radical 1,2,3-tricarbofunctionalization of α-vinyl-β-ketoesters enabled by a carbon shift from an all-carbon quaternary center

Herein, we report an intermolecular, radical 1,2,3-tricarbofunctionalization of α-vinyl-β-ketoesters to achieve the goal of building molecular complexity via the one-pot multifunctionalization of alkenes. This reaction allows the expansion of the carbon ring by a carbon shift from an all-carbon quaternary center, and enables further C–C bond formation on the tertiary carbon intermediate with the aim of reconstructing a new all-carbon quaternary center. The good functional group compatibility ensures diverse synthetic transformations of this method. Experimental and theoretical studies reveal that the excellent diastereoselectivity should be attributed to the hydrogen bonding between the substrates and solvent.

Herein, we report an intermolecular, radical 1,2,3-tricarbofunctionalization of α-vinyl-β-ketoesters to achieve the goal of building molecular complexity via the one-pot multifunctionalization of alkenes.

A leading motive for the impressive achievements in the area of assembling molecular complexity is the transformation of simple feedstock chemicals into complex molecular skeletons with superior bioactive properties. In this respect, the direct functionalization of alkenes has been demonstrated as one of the most effective and simple strategies to meet this criterion at a high level. While the difunctionalization of alkenes in a one-pot process is the major theme of considerable interest in this field,¹ the multifunctionalization of alkenes,² for example, a 1,2,3-trifunctionalization of alkenes, has the power to simultaneously incorporate multifunctional groups. Therefore, this multifunctionalization reaction model can be regarded as an efficient and novel strategy to afford molecules with high structural diversity and complexity. However, such methods are elusive.During the last decades, radical alkene functionalizations have been revealed to be a powerful tool for building complex molecular frameworks by employing a radical initiator, a transition metal catalyst, or a photocatalyst.^1f–i However, only several successful methods for the radical multifunctionalization of alkenes have been achieved. For example, the Studer group reported an elegant 1,2-boryl shift-enabled radical 1,2,3-trifunctionalization of allylboronic esters using AIBN as the radical initiator (Fig. 1a).³ Shi et al. disclosed an excellent photocatalytic perfluoroalkylation of a vinyl-substituted all-carbon quaternary center through 1,2-aryl migration (Fig. 1b).⁴ Herein, we report a new one-pot protocol to realize an intermolecular, radical 1,2,3-tricarbofunctionalization of α-vinyl-β-ketoesters through a cascade process of deconstruction–reconstruction of the all-carbon quaternary center (Fig. 1c).⁵Open in a separate windowFig. 1Radical 1,2,3-trifunctionalization of alkenes. (a) Studer''s work; (b) Shi''s work; (c) This work.The direct incorporation of a fluorine atom or fluorinated moieties into organic compounds has been extensively investigated and proved to be an significant synthetic strategy in the field of discovering new pharmaceuticals.⁶ Recently, we are interested in the radical functionalization of alkenes with fluoroalkyl groups,⁷ and we envisioned that, different from the typical Dowd–Beckwith⁸ ring expansion reaction,⁹ the addition of a fluoroalkyl radical to the C C double bond would generate an adduct radical species I, which will transform into the radical intermediate II upon ring expansion (Fig. 1c). Finally, the cascade C–C coupling affords the product with a reconstructed all-carbon quaternary center. However, there are several challenging issues that need to be addressed: (1) the carbon shift from an all-carbon quaternary center to afford a tertiary carbon center which is bulkier than the tertiary carbon center formed in a typical Dowd–Beckwith ring expansion reaction; (2) the reconstruction of all-carbon quaternary center from tertiary carbon radical II will meet the associated conformational restriction and steric congestion; (3) side reactions, such as 1,2-radical addition to the alkenyl group, homolytic couplings of the carbon radical intermediates I and II, and direct H-atom abstraction;¹⁰ (4) how to control the diastereomeric ratio of the products. To meet these challenges, we developed a novel method for the 1,2,3-trifunctionalization of alkenes using alkynyl triflones as both the CF₃ (ref. 6) and alkynyl sources, providing the ring-expanded cyclic β-ketoesters with excellent diastereoselectivity and functional group diversity. In addition, good functional group compatibility of this method was observed, which ensures the diverse synthetic transformations. Moreover, hydrogen bonding between the substrates and 2,2,2-trifluoroethanol solvent was revealed to be the key factor for the excellent diastereoselectivity obtained in this reaction, and this result was confirmed by both experimental and theoretical studies.This study began by surveying radical initiators for 1,2,3-tricarbofunctionalizing α-vinyl-β-ketoester 1a with alkynyl triflone 2a¹¹ (12 (13 dramatically increased the diastereoselectivity and (±)-3a could be obtained in an identical yield with an even higher dr value (dr > 20 : 1) (14 Without the addition of a radical initiator, a reaction did not happen ( EntrySolventYield^b (%)1EA60 (dr = 13 : 1)^c2EA55 (dr = 11 : 1)^d3EA63 (dr = 12 : 1)4MTBE45 (dr = 10 : 1)5DCE63 (dr = 15 : 1)6TolueneTrace7DMFTrace8MeOHTrace9TFE63 (dr > 20 : 1)10^eTFE60 (dr > 20 : 1)11^fTFE56 (dr > 20 : 1)12^gTFE70 (dr > 20 : 1)13^hTFE76 (65)ⁱ (dr > 20 : 1)14^jTFE71 (dr > 20 : 1)15TFETraceOpen in a separate window^aReaction conditions: alkene 1a (0.2 mmol, 1 equiv.), 2a (0.6 mmol, 3.0 equiv.), and AIBN (0.3 equiv.) in 3 mL of solvent at 85 °C for 18 h in a sealed tube under a nitrogen atmosphere.^bCrude yield and crude diastereomeric ratio were determined by ¹⁹F NMR.^cLPO was used as the initiator.^dBPO was used as the initiator.^eThe reaction was performed at 100 °C.^fThe reaction was performed at 120 °C.^gAIBN (60 mol%) was used.^h2a (3.0 equiv.) and AIBN (60 mol%) were added as two equal portions with an interval of 9 h.ⁱIsolated yield in parentheses.^j2a (3.0 equiv.) and AIBN (60 mol%) were added as three equal portions with an interval of 6 h.Under optimal conditions, a diverse array of α-vinyl-β-ketoesters serve as substrates in this metal-free deconstruction–construction of all-carbon quaternary centers for the synthesis of carbon-ring expanded cyclic β-ketoesters (Fig. 2). In most of the cases, excellent diastereoselectivities (dr > 20 : 1) were observed by crude ¹⁹F NMR analysis. Substrates with the substituents at the 5- or 6-position of the α-vinyl-β-ketoesters generally produced the corresponding product (±)-3 in higher yields than those with the substituents at the 4-position. Apart from the carbonyl group and the ester group, functional groups such as chloride ((±)-3b and (±)-3f), fluoride ((±)-3c), a methoxyl group ((±)-3d and (±)-3h), a methyl group ((±)-3e and (±)-3g) and a phenyl group ((±)-3i) can be tolerated under the reaction conditions. Notably, the phenyl ring of the core structure with two substituents reacted smoothly to afford the corresponding products ((±)-3j and (±)-3k). When substrate 1l that lacks the fused benzene ring was used for this carbon-ring expansion reaction, a dramatical loss of diastereoselectivity was detected, presumably because of the feasible interconversion of the boat and chair conformations of the intermediate. Substrates with an ethyl ester or a benzyl ester group, as opposed to a methyl ester group, delivered the corresponding products ((±)-3m and (±)-3n) with moderate yields and excellent diastereoselectivity. When the CH₂ unit of the six membered-ring was replaced by a CMe₂ group, only a trace amount of the desired product (±)-3o was detected. A reaction with the purpose of realizing an extension from the six-membered ring was also carried out and (±)-3p was obtained, although with a low yield and low diastereoselectivity. Notably, the diastereochemistries of products (±)-3e and (±)-3h have been confirmed by X-ray crystallography.Open in a separate windowFig. 2Substrate scope of α-vinyl-β-ketoesters. ^aThe reaction was performed with 1p and 2b.The scope with respect to the alkynyl triflones was also investigated and the results are summarized in Fig. 3. Generally, substituents on the phenyl ring of the arylethynyl moiety have little impact on the yields of the corresponding products. The functional groups at the para-, meta-, or ortho-position of the phenyl ring produced the desired products ((±)-4a–(±)-4k) with excellent diastereoselectivities. Furthermore, the method is compatible with alkynyl triflones that have a thienyl group or a perfluorobutyl group and the reactions afforded the product ((±)-4l or (±)-4m) with an excellent dr value, respectively. However, when the arylethynyl moiety was replaced by an alkylethynyl or a silylethynyl part, the reaction failed to produce the targeted tricarbofunctionalization product ((±)-4n or (±)-4o).¹⁵ Moreover, when triflic azide or (Z)-TolCH CHSO₂CF₃ was used in place of the alkynyl triflone, the desired product was not obtained and most of the starting material was recovered. Notably, the diastereochemistry of product (±)-4a has been confirmed by X-ray crystallography.Open in a separate windowFig. 3Substrate scope of alkynyl triflones.This 1,2,3-trifunctionalization reaction not only allows the deconstruction and reconstruction of all-carbon quaternary centers, but features good functional group tolerance and excellent diastereoselectivity. Regarding the diverse reactivities of these functional groups, many valuable synthetic transformations have been successfully achieved (Fig. 4). For example, the C–C triple bond of (±)-4a can be completely reduced to a CH₂CH₂ unit ((±)-5) in the presence of hydrogen and a Pd/C catalyst,¹⁶ while the selective reduction of (±)-4a gives rise to a Z-alkene (±)-6 when quinoline is added as an additive for the Lindlar reduction.¹⁷ The diastereochemistry of (±)-6 has been confirmed by X-ray crystallography. The selective reducing methods afford formal approaches for radical 1,3-trifluoromethylalkylation and 1,3-trifluoromethylalkenylation of α-vinyl-β-ketoesters, respectively, to produce the corresponding products which are otherwise difficult to obtain. In addition, the C–C triple bond can be oxidized under oxidative conditions with RuCl₃/NaIO₄, and (±)-4a can be smoothly transformed into the trifluoromethylated triketone (±)-7 in 65% yield.¹⁸ With a large excess amount of reducing agent LiAlH₄, the carbonyl group and the ester group, together with the C–C triple bond, can be unexpectedly reduced simultaneously, affording the alkenyl diol (±)-8 in excellent regioselectivity. The hydrolysis process under basic conditions provided a reliable method for access to a free carboxylic acid (±)-9. Interestingly, when the reaction was performed under milder conditions compared to those for the synthesis of (±)-8, (±)-4a was successfully converted into an alkynyl diol (±)-10, which can be cyclized into a spiro compound (±)-11 (ref. 19) and an endocyclic compound (±)-12,²⁰ respectively. Notably, in the majority of these cases, the excellent diastereoselectivity was reserved. These synthetic applications can demonstrate the significant value of this method.Open in a separate windowFig. 4Synthetic transformations.In order to gain some mechanistic insights into this radical cascade reaction, subsequent efforts have been made (Fig. 5). First, the detection of trifluoromethylated toluene (with toluene as the solvent, Fig. 5a, see ESI^† for details). Second, we were curious about the excellent diastereoselectivity associated with the use of TFE as the solvent. As can be seen in Fig. 5b, ¹H NMR titration of 1a with increasing amounts of TFE showed a chemical shift of the resonance signal corresponding to protons. The 2D NOESY spectrum indicates the existence of an interaction between 1a and TFE (Fig. 5c). Moreover, Job plot studies by both ¹H NMR and ¹⁹F NMR imply a 1 : 1.5 stoichiometry of the complex adduct resulting from 1a and TFE (Fig. 5d). These mechanistic studies strongly suggest that the excellent diastereoselectivity of this reaction might be attributed to the hydrogen bonding between TFE and the α-vinyl-β-ketoester.Open in a separate windowFig. 5Mechanism studies. (a) Radical probe; (b) ¹H NMR titration; (c) 2D NOESY; (d) Job plot studies.On the other hand, density functional theory (DFT) calculations have also been performed at the B3LYP-D3(SMD)/Def2-TZVP//B3LYP-D3(SMD)/Def2-SVP level of theory in the TFE solvent model to further investigate the reaction pathways (Fig. 6). On the basis of the experimental results, herein, the radical pathway was considered. Initially, the CF₃ radical addition onto 1a was calculated, and a transition state, TS1, was located with a free energy barrier of 10.9 kcal mol⁻¹ to deliver the radical intermediate int1 with an exergonicity of 20.5 kcal mol⁻¹. Then, a bicyclic transition state, TS2,²¹ with a barrier of 11.0 kcal mol⁻¹ through a concerted 1,2-shift route was found to be the lower barrier TS for int2 formation than that of the addition to 2b for the byproduct (see Fig. S5 in ESI^†), which is consistent with the experimental results of the mainly hexacyclic products. Moreover, the intrinsic reaction coordinate (IRC) calculations and the root mean square (RMS) gradient of the potential energy surface from TS2 suggested that no transition state for the formation of the previously proposed strained alkoxyl radical was found. Next, the radical intermediate int2 attacking 2b was calculated. To understand the diastereoselectivity of this step, the transition states of the addition of 2b onto the Re and Si faces of C3 in int2 were located with barriers of 12.5 and 17.4 kcal mol⁻¹ (TS3 and TS3′), respectively. It is noteworthy that the torsion angle of C1–C2–C3–C4 in TS3′ is −62.3°, larger than that of −40.9° in int2 and −49.0° in TS3, indicating that the distortion factor in TS3′ is large due to the steric effect from the trifluoroethyl group in int2 and, therefore, increases the barrier. The transition states of 2b addition were also optimized in solvents DCE and EA, and the free energy barrier differences between TS3 and TS3′ [ΔG^‡ = G^‡(TS3′) − G^‡(TS3)] are 3.6 and 3.0 kcal mol⁻¹, respectively, in agreement with the experimental observations. Finally, dissociation of a SO₂ molecule with a CF₃ radical from int3 to deliver the product was conducted, and a transition state TS4 with a much lower barrier of only 7.1 kcal mol⁻¹ was located, which led to the major product (±)-4a with a relative free enthalpy of −51.6 kcal mol⁻¹.Open in a separate windowFig. 6Gibbs free energy profile for the synthesis of 4a in the TFE solvent model.