Synthesis and characterization of α,ω-bis(4-hydroxybutyl) polydimethylsiloxanes

α,ω-Bis(4-hydroxybutyl) polydimethylsiloxane (molecular weight 1500 to 4500) can be pre-pared with well-controlled molecular weight through the reaction of 1,3-bis(4-hydroxybu-tyl)tetramethyl disiloxane and dimethoxydimethyl silane or diethoxydimethyl silane in the presence of a stoichiometric amount of water and hydrochloric acid. The molecular weight of these hydroxybutyl-terminated polysiloxanes can be determined fairly consistently by a titration method. These polysiloxanes are stable toward cyclization. © 1995 John Wiley & Sons, Inc.     

α,ω-diols from polymerization of ethylene

Polyethylene is prepared in silver perchlorate solution by initiation with dialkyl peroxydicarbonates at 0–40°C. Saponification of the polymer endgroups yields a product rich in α,ω-diols. Well-known reactions convert the hydroxyl groups to other functional groups. The diol may be condensed with phosgene so as to increase its molecular weight severalfold or crosslinked with silicon tetrachloride to form a network.     

α,ω-Disubstituted polymethylpolyphosphonates and polyphenylpolyphosphonates from condensation polymerization

Condensation polymerization of phosphonates through formation of P? O? P linkages has been achieved by (1) volatilization of methyl chloride from mixtures of CH₃P(O)Cl₂ with CH₃P(O)(OCH₃)₂; (2) volatilization or chemical removal of water from CH₃P(O)(OH)₂; and (3) volatilization of HCl from mixtures of CH₃P(O)Cl₂ with CH₃P(O)(OH)₂ or C₆H₅P(O)Cl₂ with C₆H₅P(O)(OH)₂. Depending on the proportions of the reagents, the polymerization products consist of various mixtures of chain molecules of the type \documentclass{article}\pagestyle{empty}\begin{document}${\rm X \hbox{--} P}({\rm O})({\rm R})\rlap{--}[{\rm O \hbox{--} P}({\rm O})({\rm R})\rlap{--}]_n {\rm X}$\end{document} for R = CH₃ and X = OCH₃, Cl, or OH, or for R = C₆H₅, x = Cl or OH. ³¹P nuclear magnetic resonance (NMR) was used to investigate both the polymethylpolyphosphonates and the polyphenylpolyphosphonates; and ¹H NMR of the CH₃P and CH₃O moieties was also used to study the polymethylpolyphosphonates. In the methoxyl-terminated polymethylpolyphosphonates, which was the system studied most extensively, no detectable amounts of cyclic molecules were found at equilibrium, but a crystalline methylphosphonic anhydride, CH₃PO₂, exhibited some ring structures. The equilibrium size distributions gave evidence that the sorting of the mono- and difunctional phosphorus-based units making up the oligomeric chains is affected by neighboring units. Kinetic measurements demonstrated that the condensation polymerization is a complicated process involving considerable scrambling of terminal groups with bridging oxygen atoms.     

α,ω-Dihydroxyalkan-α,α-diphosphonsäuren durch Desaminierung von ω-Aminoalkandiphosphonsäuren

α,ω-Dihydroxyalkane-α,α-diphosphonic Acids by Desamination of ω-Aminoalkanediphosphonic Acids The title compounds represent a new group of complexing diphosphonic acids which are synthesized by desamination of ω-amino-α-hydroxyalkane-α,α-diphosphonic acids. In case of α,ω-dihydroxypropane-α,α-diphosphonic acid ( 1 ) a phosphonylated phostone is formed by dehydration. In contrast, the ω-phenyl drivative of ( 1 ) yields in a smooth reaction under the same conditions 2-hydroxy-5-phenyl-3-phosphono-1.2-oxaphosphol-3-en-2-oxide ( 6 ).     

Oligomers with four 3,4-quinolinediyl units and α,ω-bis (4-chloro-3-quinolinylthio)alkanes

Starting from the reaction of thioquinanthrene 1 with sodium methoxide followed by the reaction with α,ω-dihalogenoalkanes, title bis-methoxy oligomers 4a-c with four 3,4-quinolinediyl units were prepared (40–91%). Acid catalysed hydrolysis of methoxy groups in 4a-c gave tetramers 5a-c (46–94%) with two 4(1H)-quinolinone functions. The reactions of bis-quinolinones 5a-c with phosphoryl chloride in DMF run as deoxo-chlorination and afforded tide dichlorotetramers 6a-c (51–66%) with 4-chloroquinolinyl groups. The treatment of bis-methoxy tetramers 4a -c with boiling phosphoryl chloride led to title α,ω-bis(4-chloro-3-quinolinylthio)alkanes 7a-c (52–56%) and thioquinanthrene (65–70%).     

Preparation of α,ω-ditriazinylperfluoroalkane derivatives

The synthesis of 2-oxa and 2-thiaperfluoroglutaric acids and their corresponding ethyl esters, amides, nitriles, acid chlorides, and also 2-thiaperfluoroglutaric anhydride are described. These compounds were prepared as precursors to α,ω-ditriazinylperfluoroalkane derivatives containing a heteroatom in the perfluoroalkylene chain. The ditrazinylpropanes were prepared most satisfactorily from the diacid chlorides rather than the dinitriles.     

Synthesis of α,ω-arylamine functionalized poly(dimethylsiloxane)s

This research has focused on the development of telechelic, aromatic amine functional, poly(dimethylsiloxane) oligomers without any aliphatic components in the polymer backbone. The intent is to produce flexible oligomers with enhanced thermal stability for incorporation into materials which will be processed at elevated temperatures. The poly(dimethylsiloxane)s have been synthesized using living polymerization of hexamethylcyclotrisiloxane with protected aniline derivatives as initiators and termination reagents for the reactions. Low molecular weight oligomers prepared using the living polymerization method can be easily converted to a range of higher, controlled molecular weight materials in redistribution reactions. A basic tetramethylammonium siloxanolate catalyst in conjunction with octamethylcyclotetrasiloxane has been used for the equilibration procedure. © 1993 John Wiley & Sons, Inc.     

Polyenaminoesters from α,α′-bis(carbomethoxy)diacetylbenzenes and phenylene diamines

Polyenaminoesters are prepared by condensation of α,α′-bis(carbomethoxy)diacetylbenzenes with phenylene diamines in the presence of N,N-dimethylaniline hydrochloride. Thermogravimetric analysis allowed the determination of the optimum temperature at which to conduct cyclization of the polymers to form thermally stable polypyridoquinolones. The structures of the polymers were assigned by spectroscopic comparisons with appropriate model compounds.     

Functional polymers and sequential copolymers by phase transfer catalysis. 18. Synthesis and characterization of α,ω-bis(2,6-dimethylphenol)–poly(2,6-dimethyl-1,4-phenylene oxide) and α,ω-bis(vinylbenzyl)–poly(2,6-dimethyl-1,4-phenylene oxide) oligomers

A novel and convenient synthetic method for the preparation of α,ω-bis(2,6-dimethylphenol)–poly(2,6-dimethyl-1,4-phenylene oxide) (PPO-2OH) is presented. It is based on the oxidative copolymerization of 2,6-dimethylphenol (DMP) with 2,2′-di(4-hydroxy-3,5-dimethylphenyl propane) (TMBPA) in a mixture of water–methanol or chlorobenzene–methanol. By using a 4/1 mole ratio of DMP to TMBPA and different solvent mixtures, it was possible to obtain bifunctional PPO-2OHs with number average molecular weights between 1000 and 5000. A phase-transfer-catalyzed etherification of PPO-2OH chain ends with a mixture of m- and p-chloromethylstyrene was used to synthesize α,ω-bis(vinylbenzyl)-poly(2,6-dimethyl-1,4-phenylene oxide)s (PPO-2VBs). The thermal polymerization of the PPO-2VBs was studied by differential scanning calorimetry, and has demonstrated a very high thermal reactivity for this new class of reactive oligomers.     

Vinylation and polymerization with trivinylaluminum. II. Synthesis of α,ω-diene-polyisobutylene

The polymerization of isobutylene by 3-chloro-1-butene/trivinylaluminum (V₃Al) and t-butyl chloride/V₃Al initiator systems with methyl chloride and methylene chloride as solvents has been investigated in the range from ?30 to ?72?C. The rate of polymerization increases with decreasing temperatures from ?30 to ?50°C and then decreases when the temperature is further lowered, for example, to ?72°C. Mayo plots and a determination of the number of polymer molecules n? formed per molecule of initiator employed suggests a transfer-less, i.e., termination-dominated system. A critical analysis shows that for systems containing both free ions and ion pairs, the Mayo equation is meaningful only when the degree of dissociation α remains constant over the whole [M] range investigated. This condition is achieved in RCl/V₃Al-initiated systems by using an initiator (t-BuCl) for which the rate of catalyst destruction is insignificant compared to rate of initiation, R_i, i.e., initiation efficiency, f ≈ 1 and R_i independent of [M]. Polyisobutylene, containing, 1.8 ± 0.1 terminal unsaturation, has been synthesized by the use of 3-chloro-1-butene initiator in conjunction with V₃Al coinitiator, and avenues for further efficient synthesis of α,ω-diene-polyisobutylenes have been outlined.     

Solid-state photopolymerization of α,α′-bis(4-acetoxy-3-methoxybenzylidene)-p-benzenediacetonitrile

One crystalline form of α,α′-bis(4-acetoxy-3-methoxybenzylidene)-p-benzenediacetonitrile is photopolymerized by a four-center reaction to give a polymer containing alternating benzene and cyclobutane rings. The polymer is highly crystalline and insoluble in most solvents. Location of groups around the cyclobutane ring is deduced from the products obtained on thermal decomposition. Chain contained benzene rings are located in positions 1 and 3; aromatic groups alternate sides of the cyclobutane ring. Special characterization and quantum yield of the polymerization are reported, as well as polymer solution viscosity and alkaline depolymerization of the polymer.