Synthesis and surface treatment of magnetite nanoparticles for tuning hydrophobicity and colloidal stability

Post-synthetic surface modification of magnetite nanoparticles synthesized by a modified co-precipitation process was carried out with triethoxy-terminated perfluoropolyether (PFPE) oligomers. The chemisorption of PFPE oligomers on the surface of magnetites was confirmed by ATR-FTIR and TGA analyses. The efficiency of surface modification of the oligomer to prevent the aggregation of magnetite nanoparticles was studied with the dynamic light scattering technique by measuring the hydrodynamic diameter and polydispersity index of the surface treated nanoparticles, together with their zeta potential. Aggregation kinetics profiles were constructed for surface treated nanoparticles. The obtained data was compared with magnetite nanoparticles treated with critic acid, to assess the efficiency of the surface modification with the PFPE oligomers. The comparison showed that the bifunctional PFPE oligomer treated nanoparticles are characterized by improved colloidal stability and hydrophobicity.     

Use of a polycation spacer for noncovalent immobilization of albumin on thermally modified virus particles

The noncovalent immobilization of the protein bovine serum albumin on the surface of spherical nanoparticles 330 ± 60 nm in diameter is described. These nanoparticles are prepared by the thermal treatment of tobacco mosaic virus and are preliminarily covered with a layer of the cationic polymer poly(N-ethyl-4-vinylpyridinium bromide). The electrostatic adsorption of the polycation on the surface of negatively charged spherical nanoparticles (on average 1.2 × 10⁴ macromolecules per particle) is accompanied by recharging of the surface; as a result, the negatively charged protein bovine serum albumin can be adsorbed on it in an amount of 1.7 × 10⁴ molecules per particle. The modification of spherical nanoparticles with the polycation and protein does not cause the aggregation of particles. The spherical-nanoparticle-polycation-protein ternary complex demonstrates increased stability in salt solutions relative to the spherical-nanoparticle-polycation binary complex. Because of the simplicity of the method used to modify the surface of spherical nanoparticles, it shows promise for preparation of functionally active complexes.     

Effect of surface functionalization of metal wire on electrophysical properties of inductive elements

The development of the microelectronics industry requires a new element basis with reduced size and increased functionality. The most important components in modern microelectronic integrated circuits are passive elements. One of the key challenges in order to improve the functionality of integrated circuits is to increase the quality of passive elements composing them. In this paper we suggest a novel approach to increase the quality factor Q of inductors by the surface modification and functionalization of the metal components. Ultrasound induced surface modification of metal wires led to the formation of a porous surface structure, which further can be functionalized with magnetite nanoparticles using layer-by-layer assembly technique. The surface modification and deposition of magnetite nanoparticles was investigated with SEM, XRD, and contact angle measurements. Additionally, inductance and resistance measurements, as the main parameters determining the Q-factor of inductors, were carried out. Samples with high number of magnetic nanoparticle-polyelectrolyte bilayers demonstrate a significant increase in inductance and a slight decrease in resistance in comparison to uncoated ones. The combination of these factors led to enhancement the Q-factor of the investigated inductive elements.     

DNA Hybridization at Magnetic Nanoparticles with Electrochemical Stripping Detection

A simple and practical method for electrochemical DNA hybridization assay has been developed to take advantage of magnetic nanoparticles for ssDNA immobilization and zinc sulfide nanoparticle as oligonucleotide label. Magnetic nanoparticles were prepared by coprecipitation of Fe²⁺ and Fe³⁺ with NH₄OH, and then amino silane was coated onto the surface of magnetite nanoparticles. The magnetic nanoparticles have the advantages of easy preparation, easy surface modification and low cost. The target ssDNA with the phosphate group at the 5′ end was then covalently immobilized to the amino group of magnetite nanoparticles by forming a phosphoramidate bond in the presence of 1‐ethyl‐3‐(3‐dimeth‐ylaminopropyl)carbodiimide (EDAC). The zinc sulfide (ZnS) nanoparticle‐labeled oligonucleotides probe was used to identify the target ssDNA immobilized on the magnetic nanoparticles based on a specific hybridization reaction. The hybridization events were assessed by the dissolution of the zinc sulfide nanoparticles anchored on the hybrids and the indirect determination of the dissolved zinc ions by anodic stripping voltammetry (ASV) at a mercury film glassy carbon electrode (GCE). The proposed method couples the high sensitivity of anodic stripping analysis for zinc ions with effective magnetic separation for eliminating nonspecific adsorption effects and offers great promise for DNA hybridization analysis.     

Surface modification of monodisperse magnetite nanoparticles for improved intracellular uptake to breast cancer cells

Nanoparticles have been widely used for a variety of biomedical applications and there is a growing need for highly specific and efficient uptake of the nanoparticles into target cells. Poly(ethylene glycol) (PEG), folic acid (FA), and their conjugate PEG-FA were attached to magnetite nanoparticles to compare their effects on the improvement of intracellular uptake of the nanoparticles to human breast cancer cells, BT-20. AFM and TEM results indicated that the nanoparticles after surface modification were monodisperse, with coatings on individual nanoparticles. The cell culture experiments showed that the PEG-FA coated nanoparticles were internalized into BT-20 cancer cells and exhibited higher efficiency of intracellular uptake than only PEG- or FA-coated nanoparticles. The surface modification protocols can also be used to modify the surfaces of other nanoparticles for targeting intracellular delivery.     

New advances in gated materials of mesoporous silica for drug controlled release

Drug delivery systems (DDS) are used to deliver therapeutic drugs to improve selectivity and reduce side effects. With the development of nanotechnology, many nanocarriers have been developed and applied to drug delivery, including mesoporous silica. Mesoporous silica nanoparticles (MSNs) have attracted a lot of attention for simple synthesis, biocompatibility, high surface area and pore volume. Based on the pore system and surface modification, gated mesoporous silica nanoparticles can be designed to realize on-command drug release, which provides a new approach for selective delivery of antitumor drugs. Herein, this review mainly focuses on the “gate keepers” of mesoporous silica for drug controlled release in nearly few years (2017–2020). We summarize the mechanism of drug controlled release in gated MSNs and different gated materials: inorganic gated materials, organic gated materials, self-gated drug molecules, and biological membranes. The facing challenges and future prospects of gated MSNs are discussed rationally in the end.     

Fabrication of hollow multifunctional spheres containing MCM-41 nanoparticles and magnetite nanoparticles using layer-by-layer method

Macroscopic mesoporous silica spheres have been fabricated by alternatively depositing preformed MCM-41 nanoparticles and polyelectrolytes onto polystyrene lattices. High surface area hollow mesoporous spheres were obtained by removal of the core by solvent or calcination. Further, the versatility of the layer-by-layer (LBL) method was extended to fabricate magnetite-mesoporous silica composites by depositing magnetite and MCM-41 nanoparticles onto polystyrene beads. Such high surface area composites are important since the mesopores can be used for encapsulation of varied materials like enzymes and drugs while the presence of magnetite ensures application in biocatalysis and separation under magnetic field.     

Click functionalization of magnetite nanoparticles: A new magnetically recoverable catalyst for the selective epoxidation of olefins

A new magnetically recoverable heterogeneous molybdenum catalyst was developed by means of a click chemistry approach. First, silica‐coated magnetite nanoparticles were functionalized using a bidentate ligand via thiol–ene click reaction of mercaptopropyl‐modified magnetite nanoparticles with acrylic acid. Then, a molybdenum complex was covalently supported on the surface of the clicked silica‐coated magnetite nanoparticles. The prepared catalyst was characterized using Fourier transform infrared and inductively coupled plasma optical emission spectroscopies, X‐ray diffraction, vibrating sample magnetometry and transmission electron microscopy. The catalytic performance of the prepared heterogeneous catalyst was investigated in the epoxidation of olefins with tert‐butyl hydroperoxide as oxidant. This catalyst could be reused for five runs without significant loss of activity and selectivity.     

醇热解法合成超顺磁性氧化铁纳米粒子及其性能

以甲氧基聚乙二醇同时作为溶剂、还原剂及修饰剂,在高温下分解乙酰丙酮铁,制备了纳米Fe3O4粒子,采用透射电子显微镜和X射线衍射分析表征材料的形貌和相组成,傅里叶变换红外光谱仪表征材料的表面修饰物,超导量子干涉仪测试合成的纳米粒子的磁性能,纳米粒度与zeta电势分析仪测试磁性纳米粒子在水中的zeta电势。 结果表明,纳米Fe3O4粒子的大小为（10.1±1.6） nm,粒度均一,单分散性好,在300 K下具有超顺磁性,饱和磁化强度为45 A·m2/kg。 红外结果表明,-COO-共价结合在粒子表面。 zeta电势为-25 mV。 其在水中的稳定性与以三甘醇为反应介质、高温分解法制备的纳米Fe3O4粒子作比较,表现出长时间（60 d以上）的良好分散性。 静电作用及空间位阻效应是其高稳定分散性的原因。     

Fabrication of magnetically separable palladium–graphene nanocomposite with unique catalytic property of hydrogenation

One step solvothermal route has been developed to prepare a well dispersed magnetically separable palladium–graphene nanocomposite, which can act as a unique catalyst against hydrogenation due to the uniform decoration of palladium nanoparticles throughout the surface of the magnetite–graphene nanocomposite and hence can be reused for several times. In addition to catalytic activity, palladium nanoparticles also facilitate the formation and homogeneous distribution of magnetite (Fe₃O₄) nanoparticles onto the graphene surfaces or else an agglomerated product has been obtained after the solvothermal reduction of graphene oxide in presence of Fe³⁺ alone.     

A novel capacitive immunosensor based on gold colloid monolayers associated with a sol-gel matrix

A capacitive sensing method based on self-assembling gold nanoparticles to the surface of the sol-gel modified electrode has been developed for the direct detection of the human IgG in human serum. The capacitance of the immunosensor corresponding to the concentration of human IgG is investigated by alternating current impedance. The formed mercaptopropyltriethoxysilane (MPTS) film is ultrathin; the immobilization density of antibodies is high because of high surface-volume area of the assembled gold nanoparticles and the biological macromolecules when immobilized on gold nanoparticles can retain their bioactivity. This capacitive immunosensor prepared with present method can provide high sensitivity. The linear calibration curve was obtained in the range 8.3-2128 ng/ml, with a detection limit of 3.3 ng/ml when plotted versus the logarithm of the antigen concentration. After each immunoassay, the regeneration of the electrode could be performed through washing in basic solution without obvious decrease in response. No cross-reactivity was observed with other protein species. The dependence of sol-gel modified electrode stability on the pH value and ion strength was studied. The insulating properties of the different layers of the immunosensor were also investigated.     

Surfactant-free preparation of supported cubic platinum nanoparticles

A novel method has been developed for preparing supported cubic platinum nanoparticles. Carbon monoxide and hydrogen are used to reduce platinum precursors present at a solid-gas interface and to control the shape of the growing Pt nanoparticles. By avoiding the use of any organic agents in the synthesis, cubic Pt particles free of hydrocarbons are formed, thereby avoiding possible contamination of the catalyst surface. The approach used is simple and readily scalable.     

叶酸对磁性Fe_3O_4纳米粒子的表面修饰

以FeCl3·6H2O作为单一铁源,1,6-己二胺作为胺化试剂,利用无模板的溶剂热方法制备了胺基功能化的磁性Fe3O4纳米粒子,并利用其键合叶酸分子,制备出表面修饰了叶酸的磁性Fe3O4复合纳米粒子。利用傅里叶变换红外光谱仪、X-射线衍射仪、透射电镜、差热-热重分析仪和振动样品磁强计对所得纳米粒子的形貌、粒径、化学组成和磁性能进行了表征。结果表明,叶酸分子通过化学键牢固键合在磁性纳米Fe3O4粒子表面,叶酸修饰的复合纳米粒子仍然具有良好的磁性能。     

Dendrimer modified magnetite nanoparticles for protein immobilization

A cascading polyamidoamine (PAMAM) dendrimer was synthesized on the surface of magnetite nanoparticles to allow enhanced immobilization of bovine serum albumin (BSA). Characterization of the synthesis revealed exponential doubling of the surface amine from generations one through four starting with an amino silane initiator. Furthermore, transmission electron microscopy (TEM) revealed clear dispersion of the dendrimer-modified magnetite nanoparticles in methanol solution. The dendrimer-modified magnetite nanoparticles were used to carry out magnetic immobilization of BSA. BSA immobilizing efficiency increased with increasing generation from one to five and BSA binding amount of magnetite nanoparticles modified with G5 dendrimer was 7.7 times as much as that of magnetite nanoparticles modified with only aminosilane. There are two major factors that improve the BSA binding capacity of dendrimer-modified magnetite nanoparticles: one is that the increased surface amine can be conjugated to BSA by a chemical bond through glutaraldehyde; the other is that the available area has increased due to the repulsion of surface positive charge.     

Influence of iron oxide nanoparticles on the rheological properties of hybrid chitosan ferrogels

Magnetite nanoparticles have been successfully synthesized in the presence of chitosan using an in situ coprecipitation method in alkali media. This method allows obtaining chitosan ferrogels due to the simultaneous gelation of chitosan. The chitosan concentration has been varied and its effects on the particle synthesis investigated. It has been demonstrated that high chitosan concentrations prevents the formation of magnetite due to the slow diffusion of the alkali species through the viscous medium provided by chitosan, instead iron hydroxides are formed. The presence of magnetite nanoparticles increases the elastic modulus which results in a reinforcement of the chitosan ferrogels. This effect is counterbalanced by the disruption of hydrogen bonding responsible for the formation of chitosan hydrogels in alkali media.     

Preparation of fluoroalkyl end-capped oligomers/magnetite nanocomposites possessing a good dispersibility and stability

Fluoroalkyl end-capped vinylphosphonic acid cooligomers-encapsulated magnetite nanocomposites were prepared by the magnetization of aqueous ferric and ferrous ions in the presence of the corresponding fluorinated cooligomers and magnetic nanoparticles under alkaline conditions. These fluorinated cooligomers magnetic composites are nanometer size-controlled very fine particles and have a good dispersibility and stability in water and traditional organic solvents. These fluorinated nanocomposites were also applied to the surface modification of poly(methyl methacrylate) to exhibit a good oleophobicity imparted by fluorine on their surface. Fluoroalkyl end-capped 2-methacryloyloxyethanesulfonic acid oligomer-encapsulated magnetite nanocomposites and fluoroalkyl end-capped 2-acrylamide-2-methylpropanesulfonic acid oligomer-encapsulated magnetite nanocomposites were prepared in good isolated yields by the magnetization of iron chlorides in the presence of the corresponding oligomers and magnetic nanoparticles under similar conditions. Colloidal stability of these fluorinated nanocomposites thus obtained in water was demonstrated to become extremely higher than that of fluorinated vinylphosphonic acid cooligomers/magnetic nanocomposites.     

Synthesis of aligned hematite nanoparticles on chitosan–alginate films

Iron oxide nanoparticles are being viewed with interest owing to the great potential they have in the biomedical applications like MRI contrast enhancement, targeted drug delivery, hyperthermia and recently in magnetic separation of cancer cells from the body. Templated synthesis has been considered ideal for synthesis of iron oxide nanoparticles as particles are attracted magnetically, in addition to usual flocculation through van der Waals attraction. Biological templates are attractive owing to their biocompatibility and the attractive porosity and surface chemistry that nature provides. Polysaccharides like chitosan and alginate have been employed in the synthesis of a polyion complex, which provided the active-binding sites for iron(II) ions in solution to bind. The natural organization of chitosan and alginate into a porous film has been exploited to synthesize spherical iron oxide nanoparticles through careful calcination of the iron(II) conjugate film. Our experiments indicate that the formed nanoparticles are highly crystalline, confirm to the hematite structure and have a superparamagnetic response with a low coercivity of 116 Oe. Particles thus synthesized were highly monodisperse with hydrodynamic diameter of 1.8 nm. The symmetric porosity of the film translates into the synthesis of well-aligned nanoparticles of iron oxide. Compared to synthesis in solution, the film-assisted synthesis offered a greater degree of control over the particle size distribution pattern, with the chitosan–alginate template providing the needed spatial separation to prevent the aggregation due to magnetostatic coupling. Such hematite nanoparticles can either be used directly or converted to paramagnetic magnetite by reduction. Zeta potential measurements indicate highly stable nanoparticles, which can therefore be conjugated to cationic liposomes carrying drugs and magnetically guided to target sites.     

One-step synthesis of highly water-soluble magnetite colloidal nanocrystals

A high-temperature solution-phase hydrolysis approach has been developed for the synthesis of colloidal magnetite nanocrystals with well-controlled size and size distribution, high crystallinity, and high water solubility. The synthesis was accomplished by the hydrolysis and reduction of iron(III) cations in diethylene glycol with a rapidly injected solution of sodium hydroxide at an elevated temperature. The high reaction temperature allows for control over size and size distribution and yields highly crystalline products. The superior water solubility is achieved by using a polyelectrolyte, that is, poly(acrylic acid) as the capping agent, the carboxylate groups of which partially bind to the nanocrystal surface and partially extend into the surrounding water. The direct synthesis of water-soluble nanocrystals eliminates the need for additional surface modification steps which are usually required for treating hydrophobic nanocrystals produced in nonpolar solvents through the widely recognized pyrolysis route. The abundant carboxylate groups on the nanocrystal surface allow further modifications, such as bioconjugation, as demonstrated by linking cysteamine to the particle surface. The monodisperse, highly water-soluble, superparamagnetic, and biocompatible magnetite nanocrystals should find immediate important biomedical applications.     

Controlled clustering and enhanced stability of polymer-coated magnetic nanoparticles

The clustering and stability of magnetic nanoparticles coated with random copolymers of acrylic acid, styrenesulfonic acid, and vinylsulfonic acid has been studied. Clusters larger than 50 nm are formed when the coatings are made using too low or too high molecular weight polymers or using insufficient amounts of polymer. Low-molecular-weight polymers result in thin coatings that do not sufficiently screen van der Waals attractive forces, while high-molecular-weight polymers bridge between particles, and insufficient polymer results in bare patches on the magnetite surface. The stability of the resulting clusters is poor, but when an insufficient polymer is used as primary coating, and a secondary polymer is added to coat remaining bare magnetite, the clusters are stable in high salt concentrations (>5 M NaCl), while retaining the necessary cluster size for efficient magnetic recovery. The magnetite cores were characterized by TEM and vibrating sample magnetometry, while the clusters were characterized by dynamic light scattering. The clustering and stability are interpreted in terms of the particle-particle interaction forces, and the optimal polymer size can be predicted well on the basis of these forces and the solution structure and hydrophobicity of the polymer. The size of aggregates formed by limited polymer can be predicted with a diffusion-limited colloidal aggregation model modified with a sticking probability based on fractional coating of the magnetite cores.     

An easy synthesis of nanostructured magnetite-loaded functionalized carbon spheres and cobalt ferrite

An easy method in a solvothermal system has been developed to synthesize nanostructured magnetite (Fe₃O₄)-loaded functionalized carbon spheres (CSs) and cobalt ferrite (CoFe₂O₄). Surface-tunable CSs loaded with iron oxide (Fe₃O₄) nanoparticles were prepared using an acetylferrocene Schiff base (OPF), whereas spinel cobalt ferrite (CoFe₂O₄) was synthesized via metal complexes of a ferrocenyl Schiff base with phenol moiety (Co-OPF). The formed composite powder was investigated using X-ray powder diffraction, Raman spectrometry, Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and vibrating sample magnetometry. It was found that most of the iron oxide nanoparticles were evenly distributed upon the surface of the CSs. Furthermore, the surface of the iron oxide-loaded CSs has large numbers of functional groups. Good saturation magnetization was achieved for the formed magnetic nanoparticles.