Nanoparticle Microreactor: Application to Synthesis Of Titania by Thermal Decomposition of Titanium Tetraisopropoxide

The nanoparticle microreactor (NPMR) is a new concept that we have introduced to describe a very small-scale system capable of converting an aerosol precursor to solid particles. The liquid precursor of about 1 µl is injected by a syringe through a septum into a tubular evaporator of 1.0 cm³ in volume with stopcocks at both ends. The evaporator has been preheated by a heating tape to a temperature sufficiently high for vaporization to occur in half a minute. By opening the stopcocks, the vaporized precursor is transported by a carrier gas stream into a quartz tube which is mounted along the axis of a tubular furnace. The nanoparticle aggregates produced in the reactor are sampled by deposition on an electron micrograph grid at the reactor exit. The NPMR was applied first to the synthesis of TiO₂ particles by thermal decomposition of titanium tetraisopropoxide (TTIP) in a nitrogen carrier gas, with TTIP concentrations varying from 1.0 to 7.0 mol% or 2.35×10^–6 to 1.65×10^–5 in TiO₂ volume loading, and decomposition temperatures from 300°C to 1000°C. Studies were made with a 2 mm reaction tube and a 4 mm tube with sheath gas. With the 2 mm tube, a considerable fraction of the TTIP precursor was consumed at the wall by surface reaction, resulting in very small particles. With the 4 mm tube, the primary particle size was comparable to that reported in the literature for steady flow experiments using a 22.2 mm tube. Primary particle sizes ranged from 200 to 400 nm. Depending on TTIP concentration and reactor temperature, the particles exhibited a bimodal size distribution, probably due to a two-stage nucleation. A fourfold increase in the gas flow rate had little effect on particle size, indicating that particle growth ended early, within one-fourth the tube length. Residence time in the reactor was between 0.35 and 1.4 s, and total run time about 1 min. The NPMR has potential for rapid assembly of large databases and is adaptable to combinatorial discovery of nanoparticles with novel properties. Design requirements for an ideal aerosol microreactor are discussed briefly.     

The crystal structure of (L-proline-L-alanine) copper (II)·2·5 H2O

The crystal and molecular structure of (L-proline-L-alanine) Cu·2·5 H₂O has been determined by the heavy atom method with 583 visually estimated reflexions and refined by full matrix least squares toR=0·101. The crystals are monoclinic witha=16·47 (3),b=7·74 (2),c=9·51 (3) Å andβ=109·7 (5)°; space groupC2;Z=4. The copper coordination is nearly square pyramidal with one water in the basal plane and another occupying the apical together with the aminoN, peptideN and the carboxylO of the dipeptide in the coordination. The Cu-peptide-Cu linkage isvia the hydrogen bonding between the water in the basal plane and the carbonyl O atom of the proline residue. One water is on the 2-fold axis.     

Temperature dependence of Cu2O orientations in oxidation of Cu (111)/ZnO (0001) by oxygen plasma

The role of temperature on the oxidation dynamics of Cu₂O on ZnO (0001) was investigated during the oxidation of Cu (111)/ZnO (0001) by using the oxygen plasma as oxidant. A transition from single crystalline Cu₂O (111) orientation to micro-zone phase separation with multiple orientations was revealed when the oxidation temperature increased from 300 ℃ to higher. The experimental results clearly showed the effect of oxidation temperature with the assistance of oxygen plasma on changing the morphology of Cu (111) film and enhancing the lateral nucleation and migration abilities of cuprous oxides. A vertical top-down oxidation mode and a lateral migration model were proposed to explain the different nucleation and growth dynamics of the temperature-dependent oxidation process in the oxidation of Cu (111)/ZnO (0001).     

A density functional theory study on the adsorption of CO and O2 on Cu-terminated Cu2O （111） surface

The adsorptions of CO and 02 molecules individually on the stoichiometric Cu-terminatcd Cu20 （111） surface are investigated by first-principles calculations on the basis of the density functional theory. The calculated results indicate that the CO molecule preferably coordinates to the Cu2 site through its C atom with an adsorption energy of-1.69 eV, whereas the 02 molecule is most stably adsorbed in a tilt type with one O atom coordinating to the Cu2 site and the other O atom coordinating to the Cul site, and has an adsorption energy of -1.97 eV. From the analysis of density of states, it is observed that Cu 3d transfers electrons to 2π orbital of the CO molecule and the highest occupied 5σ orbital of the CO molecule transfers electrons to the substrate. The sharp band of Cu 4s is delocalized when compared to that before the CO molecule adsorption, and overlaps substantially with bands of the adsorbed CO molecule. There is a broadening of the 2π orbital of the 02 molecule because of its overlapping with the Cu 3d orbital, indicating that strong 3d-2π interactions are involved in the chemisorption of the 02 molecule on the surface.     

Spin-Hamiltonian Parameters and Defect Structure of the Copper (2+) Center in Lithium Borate

The spin-Hamiltonian parameters (the anisotropic g factors g _|| and g _⊥ and the hyperfine structure constants A _|| and A _⊥) for the impurity Cu²⁺ in Li₂B₄O₇ are theoretically investigated using the high-order perturbation formulas of these parameters for a 3d ⁹ ion in tetragonally elongated octahedra. In the calculation formulas, the tetragonal field parameters D_s and D_t are determined from the superposition model, by considering the relative axial elongation of the oxygen octahedron around Cu²⁺ due to the Jahn-Teller effect. Based on the calculations, the relative axial elongation of about 0.21 Å for the tetragonal Cu²⁺ center was found.     

Theoretical studies of the defect structures and spin Hamiltonian parameters for manganese(II) and nickel(II) doped Zn(en)3(NO3)2 single crystals

The spin Hamiltonian parameters (g factors, hyperfine structure constants and zero-field splittings D and E) and local structures for Mn²⁺ and Ni²⁺ in [Zn(en)₃](NO₃)₂ single crystal are theoretically investigated from the perturbation calculations for trigonally distorted 3d⁵ and trigonally (or orthorhombically) distorted 3d⁸ cluster. The trigonal Mn²⁺ and Ni²⁺ centres are found to undergo the moderate angular variations Δβ of 4.5° and 5.2°, respectively, related to host Zn²⁺ site due to size mismatch. The orthorhombic Ni²⁺ centre shows the relative axial elongation ratio ρ (≈ 2.5%) and the relative perpendicular bond length variation ratio τ (≈0.2%). For Mn²⁺ centre, the contributions to g-shifts Δg_CT (or hyperfine structure constants A_CT and zero-field splitting D_CT) from charge-transfer (CT) mechanism are opposite in sign and five times (or 5% and 8%) in magnitude compared with those from crystal-field (CF) mechanism. For the trigonal Ni²⁺ centre, Δg_CT (or D_CT) are the same (or opposite) in sign and 17% (or 2%) in magnitude related to those from CF mechanism. For the orthorhombic Ni²⁺ centre, Δg_CT and E_CT (or D_CT) are same (or opposite) in sign and 16% and 48% (or 442%) in magnitude with respect to those from the CF mechanism. The signs and magnitudes of the trigonal distortion angles δβ (≈ ?0.3 and 0.4°) related to an ideal octahedron and the local angular variations Δβ related to the host bond angle are suitably illustrated by those of the axial distortion degree (ADD) and the angular variation degree (AVD) of the systems, respectively.     

铂基团簇Pt3X(X=Al，Si，Cu)催化水制氢及其水解副产物氧化CO

本文基于第一性原理研究了利用具有幻数结构特点的Pt₃X(X=Al,Si,Cu)团簇仅通过一步反应就能催化分解水制氢的反应过程. 吸附物H₂O@Pt₃X团簇在波长300∽760 nm的紫外和可见光范围内有强吸收,表明太阳光可以方便地用于Pt₃X的催化水解制氢的反应. 此外,水解后滞留在团簇上的O原子可在反应活化能为0.34∽0.58 eV内与CO氧化反应生成CO₂. 这个通过氧化消除“毒性”CO的结果表明了反应副产物有能作催化剂的循环再利用能力. 本文发现生成的CO₂分子还可以在323 K的温度下脱离Pt₃X小团簇.     

Preparation of flower-like Cu2O nanoparticles by pulse electrodeposition and their electrocatalytic application

A pulsed electrodeposition technique based on a multipulse sequence of potentials of equal amplitude, duration and polarity was employed for preparation of highly dispersed flower-like cuprous oxide (Cu₂O) nanoparticles. The morphology analysis of the particles using scanning electron microscope (SEM) reveals that the flower-like particles were from sequential growth of Cu₂O along the (1 1 1) direction on the cubic Cu₂O (1 0 0). The structure and the chemical composition of the deposits were characterized by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Optical property and band gap of the Cu₂O was investigated using UV/vis diffuse reflection spectra (DRS), and the measured value of energy gap is 2.18 eV. The dark and light open circuit potential-time characterization study showed that the flower-like Cu₂O nanoparticles exhibited good photoelectric response. Cyclic voltammetry carried out in the presence of p-nitrophenol (p-NP) shows that the electrocatalytic performance of the Cu₂O particles for the reduction of p-NP, which was characterized by a cathodic peak at around −0.6 V. The influence of the incidence of light on the electrocatalysis is also discussed.     

Determination of optical nonlinearities in Cu(mpo)2 by Z-scan technique

The optical nonlinearities of Cu(mpo)₂ [formula = C₁₀H₈N₂CuO₂S₂] complex have firstly been investigated by using the Z-scan technique with a nanosecond-pulsed Nd:YAG laser at its second harmonic (532 nm) radiation. The nonlinear optical absorption and refraction coefficients of Cu(mpo)₂ have been measured with the different on-axial peak irradiances I ₀ at the waist ranging from 0.48 to 5.66 GW/cm². The nonlinear transmittance characteristics exhibit the near resonant two-photon absorption (TPA) at 532 nm and are explained by a population redistribution model. The nonlinear absorption originates from the near resonant TPA while the mechanism of the nonlinear refraction is the near resonant TPA transition enhancement. The linear increasing dependences of the optical nonlinearities on the incident irradiance arise from the population redistribution due to the near resonant TPA.     

在氧-水蒸气存在下单相Sr2(Gd,Ce)2Cu2RuO10的合成及其电学性质

传统固相反应所合成的锶系钌铜氧化物，通常总伴有少量铁磁性SrRuO₃杂相.采 用氧(或空 气)_水蒸气混合气氛下的新型固相反应，既能成功合成锶系钌铜氧化物的前驱物纯相Sr₂G dRuO₆(211相), 也能进一步在相对低的温度下成功合成锶系钌铜氧1222纯相化 合物RuSr₂(Gd,Ce)₂Cu₂O₁₀ (Ru_1222）， 使其中SrRuO _{关键词： 水蒸气参与的新型固相反应 2}(Gd')" href="#">RuSr₂(Gd 2Cu_{2< /sub>O10纯相')" href="#">Ce)2Cu2< /sub>O10纯相 3杂相')" href="#">SrRuO3杂相 电学性质}     

Preparation and Characterization of Poly(Methyl Methacrylate) Coated TiO2 Nanoparticles

Titanium dioxide (TiO₂) nanoparticles were modified with poly(methyl methacrylate) (PMMA) to improve the dispersion stability of the nanoparticles in a dielectric medium and to reduce the density mismatch between TiO₂ and a dielectric medium for a microcapsule‐type electrophoretic display application. Nanoparticles were coated with PMMA by in situ dispersion polymerization. The PMMA‐coated TiO₂ nanoparticles were characterized by fourier transform‐infrared spectrometrey (FT‐IR), electrophoretic light scattering (ELS), and scanning electron microscopy (SEM). Density of PMMA‐coated TiO₂ nanoparticles was found to be dependent on the thickness of the PMMA coating on the nanoparticles. An increase of thermal stability of the PMMA layer and the contents of PMMA on the surface of the nanoparticles were measured via thermogravimetric analysis (TGA).     

生物油及生物质炭电催化制氢

报道了以生物质热裂解产物-生物油和生物质炭为原料,利用双固定床反应器和电催化水蒸气重整方法高效制氢过程研究．获得的最大绝对氢产率达到110.9 g H₂/1 kg干生物质,气相产物包括72%H₂、26%CO₂、1.9%CO和痕量的CH₄．研究了添加生物质炭对生物油制氢效果的影响,以及重整反应温度、通入催化床的电流等反应条件对生物油和生物质炭制氢效果的影响．结果表明,生物质炭的添加使绝对氢产率增加了大约20%～45%,提     

Initial oxidation kinetics and energetics of Cu0.5Au0.5 (0 0 1) film investigated by in situ ultrahigh vacuum transmission electron microscopy

The initial oxidation behavior of Cu_0.5Au_0.5 (0 0 1) thin film was investigated by in situ ultrahigh vacuum transmission electron microscopy to model nano-oxidation of alloys with one active component and one noble component. The formation of irregular-shaped octahedron Cu₂O islands with cube-on-cube crystallographic orientation to the substrate film was observed at all temperature studied. The energetics of Cu₂O nucleation for Cu and Cu_0.5Au_0.5 oxidation was compared. Cu_0.5Au_0.5 oxidation has lower nucleation activation energy due to the reduced mismatch strain between Cu₂O and Cu_0.5Au_0.5 films. On the other hand, the reaction kinetics for Cu_0.5Au_0.5 alloy oxidation is slower due to the higher diffusion activation energy of Cu.     

Photooxidation of different organic dyes (RB, MO, TB, and BG) using Fe(III)-doped TiO2 nanophotocatalyst prepared by novel chemical method

The nano-structured Fe(III)-doped TiO₂ photocatalysts with anatase phase have been developed for the oxidation of non-biodegradable different organic dyes like methyl orange (MO), rhodamine B (RB), thymol blue (TB) and bromocresol green (BG) using UV-Hg-lamp. The different compositions of Fe_xTi_1−xO₂ (x = 0.005, 0.01, 0.05, and 0.1) nanocatalysts synthesized by chemical method (CM), have been characterized by X-ray diffraction (XRD), UV-vis diffuse reflectance spectra, specific surface area (BET), transmission electronic microscopy (TEM) analysis, XPS, ESR and zeta potential. From XRD analysis, the results indicate that all the compositions of Fe(III) doped in TiO₂ catalysts gives only anatase phase not rutile phase. For complete degradation of all the solutions of the dyes (MO, RB, TB, and BG), the composition with x = 0.005 is more photoactive compared all other compositions of Fe_xTi_1−xO₂, and degussa P25. The decolorization rate of different dyes decreases as Fe(III) concentration in TiO₂ increases. The energy band gap of Fe(III)-doped TiO₂ is found to be 2.38 eV. The oxidation state of iron has been found to be 3+ from XPS and ESR show that Fe³⁺ is in low spin state.     

Analysis of the magnetic structure of the manganese oxychalcogenides R2Mn2Se2O (R=LaO,BaF) by density functional calculations

We examined the magnetic structures of R₂Mn₂Se₂O (R=LaO, BaF) by evaluating the spin exchange interactions on the basis of density functional theory (DFT) calculations, and compared how they differ from that of the Fe analog (BaF)₂Fe₂Se₂O. In R₂Mn₂Se₂O (R=LaO, BaF), the two-dimensional antiferromagnetic square lattice defined by J₁ is spin-frustrated, and the exchange J₁ is stronger for (LaO)₂Mn₂Se₂O than for (BaF)₂Mn₂Se₂O by a factor of 1.5 explaining why the magnetic susceptibility maximum occurs at a higher temperature for (LaO)₂Mn₂Se₂O than for (BaF)₂Mn₂Se₂O (360 vs. 210 K). We identified two probable reasons why the specific heat anomaly at the long-range antiferromagnetic ordering temperature T_N is significantly weaker for R₂Mn₂Se₂O than for (BaF)₂Fe₂Se₂O.     

Influence of laser power on the orientation and microstructure of CeO2 films deposited on Hastelloy C276 tapes by laser chemical vapor deposition

CeO₂ films were prepared on LaMnO₃/MgO/Gd₂Zr₂O₇ multi-coated Hastelloy C276 tapes by laser chemical vapor deposition at different laser power (P_L) from 46 to 101 W. Epitaxial (1 0 0) CeO₂ films were prepared at P_L = 46-93 W (deposition temperature, T_dep = 705-792 K). Epitaxial CeO₂ films had rectangular-shaped grains at P_L = 46-77 W (T_dep = 705-754 K), while square-shaped grains were obtained at P_L = 85-93 W (T_dep = 769-792 K). CeO₂ films showed a columnar microstructure. Epitaxial (1 0 0) CeO₂ films with rectangular grains exhibited full width at half maximum of ω-scan on (2 0 0) reflection and ?-scan on (2 2 0) reflection of 3.4-3.2° and 6.0-7.2°, respectively. The deposition rate of the epitaxial (1 0 0) CeO₂ films had a maximum of 4.6 μm h⁻¹ at P_L = 77 W (T_dep = 754 K).     

A density functional theory study on the adsorption and dissociation of N2O on Cu2O(1 1 1) surface

Density functional theory has been employed to investigate the adsorption and the dissociation of an N₂O at different sites on perfect and defective Cu₂O(1 1 1) surfaces. The calculations are performed on periodic systems using slab model. The Lewis acid site, Cu_CUS, and Lewis base site, O_SUF are considered for adsorption. Adsorption energies and the energies of the dissociation reaction N₂O → N₂ + O(s) at different sites are calculated. The calculations show that adsorption of N₂O is more favorable on Cu_CUS adsorption site energetically. Cu_CUS site exhibits a very high activity. The Cu_CUS-N₂O reaction is exothermic with a reaction energy of 77.45 kJ mol⁻¹ and an activation energy of 88.82 kJ mol⁻¹, whereas the O_SUF-N₂O reaction is endothermic with a reaction energy of 205.21 kJ mol⁻¹ and an activation energy of 256.19 kJ mol⁻¹. The calculations for defective surface indicate that O vacancy cannot obviously improve the catalytic activity of Cu₂O.     

Growth of Sn(O,S)2 buffer layers and its application to Cu(In,Ga)Se2 solar cells

Sn-based thin films as new buffer layer for Cd-free Cu(In,Ga)Se₂ (CIGS) solar cells were developed. The Sn(O,S)₂ films were formed on CIGS substrates by chemical bath deposition from an alkaline ammonia solution by reacting tin(IV) chloride with thiourea. Optimization of the growth process allowed the smooth and conformal coverage of the films on the CIGS substrates with a thickness of 20 nm that was a self-limited thickness in the chemical bath deposition process. XPS analysis revealed that the as-deposited films contained Sn–O, Sn–OH, and Sn–S bondings and the ratio of Sn–S bonding to Sn–O bonding was 0.3. The CIGS solar cell fabricated with a 20-nm thick Sn(O,S)₂ buffer layer had the best efficiency of 11.5% without AR coating. The open circuit voltage, short circuit current, and fill factor were 0.55 V, 34.4 mA/cm², and FF = 0.61, respectively. The open circuit voltage and fill factor were low compared to the conventional CIGS solar cell with a 50-nm thick CdS buffer due to too thin Sn(O,S)₂ buffer layer.