Adsorption of tartrazine from an aqueous solution by octadecyltrimethylammonium bromide-modified bentonite: Kinetics and isotherm modeling

A modified bentonite was prepared at different surfactant (ODTMA) loadings through ion exchange. The obtained organobentonite adsorbent materials were then used for the removal of an anionic dye, tartrazine, from an aqueous solution. The bentonite was characterized by X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, and Brunauer- Emmett-Teller (BET) method. The modification of organophilic bentonite by ODTMA increases the basal spacing d₀₀₁ from 24.1 to 39.1 Å when the cation exchange capacity increases from 1 to 4. The increase in the spacing, due to the basic organic modifications, was confirmed by the results of thermogravimetric analysis, Fourier transform infrared spectroscopy, and BET. The effects of contact time, initial concentration, and solution pH onto an adsorbed amount of tartrazine were investigated. To predict adsorption isotherm, the experimental data were analyzed using the Langmuir and Freundlich isotherm equations. It was determined that the isotherm data were fitted to the Langmuir isotherm. The adsorption process was also found to follow a pseudo-second-order kinetic model.     

A thermal,sorptive and spectral study of HDTMA-bentonite loaded with uranyl phosphate

The influence of phosphate ions on the thermal stability of complexes obtained by adsorption of uranium(VI) on organobentonite was determined. Organoclay samples were prepared by the reaction of hexadecyltrimethylammonium bromide with bentonite. The isotherms of sorption/desorption of U(VI) from aqueous solutions containing phosphate ions onto different forms of bentonite were measured using the batch method. The highest amount of uranium was absorbed on HDTMA-bentonite in the presence of phosphates. This may have been associated with the complexing of U(VI) ions by phosphate ions, which interacted with surfactant cations probably via electrostatic forces. A TG–DSC–MS study showed that the thermal decomposition of the surfactant sorbed on bentonite proceeded in two stages: at 200–400 and at 600–800 °C. The first stage involved defragmentation and oxidation of surfactant cations present in the interior and on the surface of the mineral. The second stage involved oxidation of charcoal and simultaneous dehydroxylation of the sorbent. The oxidation of surfactant cations and the dehydroxylation of the mineral were suppressed in the presence of phosphates.     

Curing Characteristics and Tear Properties of Bentonite Filled Ethylene Propylene Diene (EPDM) Rubber Composites

The effect of bentonite clay loading on curing characteristics and tear strength of bentonite filled ethylene propylene diene monomer (EPDM) composite were studied. Compounding was carried out on two-roll mill and vulcanization was done at 150⁰C. Torque values, scorch time and optimum cure time of the prepared rubber compound were assessed by using Mosanto Disc Rheometer (MDR 2000). Results indicated that the maximum torque of EPDM/Bt composite decreases at high bentonite loading. Increasing in values with increasing bentonite loading was recorded for minimum torque and optimum cure time of EPDM/Bt composite. The increase is related with the increase in viscosity due to the increasing of bentonite clay loading in EPDM matrix. Scorch time was found to be decreasing up to 30 phr bentonite clay. Results also show that tear strength of EPDM/Bt composite increased with increasing bentonite loading up to 90 phr. The reason is probably due to agglomeration occur causes the reduction in properties at high loading above 90 phr bentonite clay. The scanning electron microscopy (SEM) of tear fracture surface of EPDM/Bt composite illustrated that with increasing bentonite loading up to 90 phr bentonite clay, a better dispersion of bentonite clay is achieved as compared to lower loading, resulting in high tear strength value for EPDM/Bt composite.     

有机膨润土结构对吡虫啉吸附热力学和动力学的影响机理

为深入了解有机膨润土结构对农药吸附性能的影响机理,论文制备十六烷基三甲基氯化铵(HTMA)载量系列变化的有机膨润土,通过吸附热力学和动力学研究了新烟碱杀虫剂吡虫啉与改性有机膨润土的相互作用和影响农药分子在有机膨润土层间扩散的结构因素。结果显示,季铵盐改性削弱了膨润土片层与吡虫啉的静电结合,但是增强与吡虫啉的疏水相互作用。吡虫啉吸附动力学与有机膨润土层间结构密切相关,低载量(<0.8′CEC)的HTMA对膨润土层间距的影响很小,但是层间堆积密度的增加导致吡虫啉吸附速率常数急剧下降。HTMA载量的进一步增加导致其层间排列方式由单层平铺向双层平铺的转变,层间距急剧增加使得吡虫啉吸附速率常数略有增大。     

Treatment of anionic dye aqueous solution using Ti,HDTMA and Al/Fe pillared bentonite. Essay to regenerate the adsorbent

In this study, the adsorption removal of an anionic dye (Congo red) by a local bentonite before and after modification was studied. The modification of the bentonite was made by organophilisation using surfactant (HDTMA) and by pillaring process to obtain a bentonite with Ti pillars and with mixed pillars of Fe/Al. The various synthesized materials are characterized by different techniques such as DRX, MET, N₂ adsorption-desorption, Zeta potential measurement. Results show the development of the texture and the structure of the bentonite after modification. The various adsorbents synthesized show an increase in the adsorption capacity of Congo Red compared to the initial bentonite. Adsorption isotherms are described by the Langmuir model in all cases except that for Ti pillared bentonite, the Freundlich model is more suitable. Pseudo-second order is better for describing the adsorption process. Also, regeneration of the adsorbent is approached in this study by photochemical way and the results show a total regeneration of the adsorbent.     

Chloride ion migration in natural bentonite

The disposal of nuclear wastes in geological formations demands the construction of engineering barriers. Bentonite clay rock is frequently used both as natural and engineering barrier. The natural bentonite rock in its original form is considered as compacted bentonite if the density is higher than 1.2 g/cm³. In this paper, the risk of the extrapolation of the laboratory experiments to field conditions and the high differences of the natural samples are emphasized: as much as 52 % standard deviation was obtained in the migration coefficients characterizing bentonite samples collected from the same site with a very small extent of sampling. Moreover, the bulk densities (1.18–1.87 g/cm³) and montmorillonite content are also rather different (45–71 m/m %).The contradictions of the effects of the swelling clay mineral (montmorillonite) content and the bulk density of bentonite are illustrated: it is shown that the migration rate of chloride anion is determined by the ratio of the different water types (interlayer water of montmorillonite to free pore water of bentonite, including the electric double layer water). The apparent migration coefficients of bentonite clay and concrete (natural and artificial engineering barrier) are compared.     

Depolymerization and ionic conductivity of enzymatically deproteinized natural rubber having epoxy group

Preparation of liquid epoxidized natural rubber (ENR) was made by oxidative depolymerization of ENR in latex stage without loss of epoxy group. Epoxidation of fresh natural rubber latex, which was purified by deproteinization with proteolytic enzyme and surfactant, was carried out with freshly prepared peracetic acid. The glass transition temperature (T_g) and gel content of the rubbers increased after the epoxidation, both of which were dependent upon an amount of peracetic acid. The gel content was significantly reduced by oxidative depolymerization of the rubber with (NH₄)₂S₂O₈ in the presence of propanal. The resulting liquid epoxidized rubber (M_n≈10⁴) was found to have well-defined terminal groups, i.e. aldehyde groups and α-β unsaturated carbonyl groups. The novel rubber was applied to transport Li⁺ as an ionic conducting medium, that is, solid polymer electrolyte.     

Zeta potential of inorganic fine particle—Na-bentonite binder mixture systems

The zeta potential of single and multi-inorganic fine particle mixtures (hematite and gangues, i.e., SiO₂ + Al₂O₃) with Na-bentonite was investigated to understand and properly control the mineral surface properties relevant to pelletization of low-grade fine iron ores. The zeta potential of hematite-bentonite mixture showed more negative charge up to 1 wt.% bentonite dosage and became constant. In the multiparticle mixture systems with bentonite, the SiO₂ amount in the system controlled the changes in zeta potential due to its high negative charge (−54.9 mV at natural pH) and the bentonite attachment on its surface based on the electrostatic interaction while Al₂O₃ had no effect due to its negligible surface charge (−1.6 mV at natural pH). This article reports the new insight into the characterization of surface chemistry of inorganic/mineral mixture systems to understand their surface charge properties in relation to fine mineral particle processing, and to show a direction toward the elucidation of particle dispersion/aggregation mechanism in complex ore systems aiming for their beneficiations.     

Low temperature degradation and characterization of natural rubber

Low temperature degradation of natural rubber was performed with potassium persulfate (K₂S₂O₈, KPS) in the latex stage at 30 °C to accomplish a good processability of the rubber. Various grades of natural rubbers were used as a source rubber. Gel content, molecular weight and chemical structure of the rubbers were characterized by swelling method, size exclusion chromatography and ¹H NMR spectroscopy, respectively. The well characterized natural rubber was subjected to oxidative degradation with KPS at 30 °C. Mooney viscosity decreased when the latex was degraded with 1.0 phr of KPS and it was dependent upon the amount of KPS. Molecular weight and gel content of the degraded natural rubber were about one-half as low as those of the source rubber. Chemical structure of the rubber was analyzed through Fourier transform infrared and ¹H NMR spectroscopic methods. The degraded natural rubber was found to contain carbonyl and formyl groups as an evidence of the oxidative degradation. Tensile strength of a vulcanizate prepared from the degraded natural rubber was the same as that prepared from the source rubber, even though the gel content and the molecular weight of the degraded rubber were distinguished from those of the source rubber.     

Adsorption study of an industrial dye by an organic clay

In this study, the adsorption of an industrial dye Supranol Yellow 4GL onto Cetyltrimethylammonium-bentonite (CTAB-bentonite) is investigated. The organobentonite is synthesised by exchanging cetyltrimethylammonium cations (CTAB) with inorganic ions on the surface of bentonite. The adsorption of Supranol Yellow 4GL onto organobentonite is found to be maximum when the concentration of CTAB exchanged is 100% according to the cation exchange capacity of the clay (CEC). The modification of organobentonite is examined using XRD and FTIR techniques. The effect of the process parameters such as: contact time, adsorbate concentration, adsorbent dose, pH and temperature are reported. Nearly 1200 seconds of contact time are found to be sufficient for the adsorption to reach equilibrium. The pseudo second order model is used to describe the kinetic data, and the rate constant is therefore evaluated. The dye adsorption to organobentonite is characterized by monolayer isotherm and caused by adsorption with relatively strong uptake. The Langmuir and Freundlich models adsorption are applied to describe the isotherm equilibrium and to determine its constants. The Langmuir and Freundlich models agree well with the experimental data with a adsorption capacity of 0.5 g of dye per g of organobentonite. A better fixation was obtained at acidic pH. The effect of temperature on the adsorption of dye has been also studied and the thermodynamic parameters ΔH, ΔS, ΔG, were determined. Organobentonite is found to be effective for removing Supranol Yellow 4GL dye from wastewater.     

Protein-free natural rubber

Some properties of protein-free natural rubber were investigated by measurements of both water uptake and stress versus strain. The protein-free natural rubber was prepared in latex stage by the novel procedure to remove all proteins from natural rubber with urea and a polar organic solvent in the presence of surfactant, which had been developed in our recent work. First, the condition for the removal of the proteins was investigated in terms of affinity of the polar organic solvents, concentration of the solvents, type of surfactant, and repeating times for washing latex with a centrifuge. Acetone and anionic surfactant were found to be effective for the removal of the proteins. Under an optimum condition, total nitrogen content and amount of extractable proteins of deproteinized natural rubber were 0.000 w/w% and 0.00 μg/ml, respectively. The removal of the proteins from natural rubber was confirmed through Fourier transform infrared (FT-IR) spectroscopy. Water uptake, hydration, and tensile strength of the rubbers were measured by water swelling method, FT-IR spectroscopy, and measurement of stress versus strain, respectively. The water uptake and the hydration were dependent upon the content of the proteins. The tensile strength of the rubbers, which were prepared to be as-cast films without crosslinking, decreased after removal of the all proteins.     

Organometallic polymers. III. Organometallic modifications of diene polymers

A process for the chemical modification of polybutadienes and natural rubber by various metallocene compounds is described. Soluble products of up to 43% ferrocene content were obtained. The effect of substrate, metallocene, and reaction conditions on the course and extent of substitution was investigated. The glass transition temperature T_g was found to increase considerably with the degree of substitution, e.g., cis-polybutadiene substituted with ferrocene (18 mole-%) has a T_g of 30°C, as compared with ?91°C for the unsubstituted polymer.     

A thermodynamic surface model for caesium sorption on bentonite

Caesium sorption on Wyoming bentonite MX-80 has been studied in solutions of NaCl, KCl, MgCl₂, CaCl₂, NaNO₃ and Ca (NO₃)₂ of concentrations varying between 0.025 and 1 mol/L, as well as in a weakly saline (I=0.004 ml/L) and a strongly saline (I=0.46 mol/L) natural groundwater. These experiments have been used to derive a thermodynamic model for the interaction of caesium with the bentonite surface in accordance with a surface chemical model, including acid/base reactions developed recently for montmorillonite. The sorption behaviour of caesium on bentonite can be described, within the experimental and model uncertainties, in terms of a one-site ion exchange model. The ion exchange constant obtained for the reaction NaX+Cs⁺CsX+Na⁺ (where X represents the ion exchange sites on montmorillonite) is log₁₀K⁰_ex=1.6. Impurities in the bentonite, influencing the concentrations of competing cations, such as Na⁺, K⁺, Mg²⁺ and Ca²⁺, have a crucial impact on the sorption of caesium. This impact can be adequately quantified with the present model. The model predictions compare well with sorption data published in the open literature on both Wyoming bentonite MX-80 and other types of bentonite. Distribution coefficients from the literature obtained from both batch and diffusion experiments and varying over four orders of magnitude are reproduced and explained successfully by the model.     

UO 2 2+ sorption on bentonite

The capacity of bentonite and purified bentonite to remove UO ₂ ²⁺ ions from aqueous solutions has been investigated. The UO ₂ ²⁺ uptake in these clays was determined for 0.2 and 0.002M uranyl nitrate solutions. It was found that under these conditions (0.2M) the maximum UO ₂ ²⁺ uptake was 1.010±0.070 meq UO ₂ ²⁺ /g of bentonite and 0.787±0.020 meq UO ₂ ²⁺ /g of purified bentonite. In purified bentonite UO ₂ ²⁺ sorption is irreversible up to 50 hours as no desorption was observed. Such is not the case in the natural bentonite. X-ray diffraction, thermal analyses, and transmission electron microscopy were used to characterize the solids. The uranium content was determined by neutron activation analysis.     

Thermoelectric Properties of Natural Chalcopyrite from Zacatecas,Mexico

The phase and chemical compositions of the mineral chalcopyrite from the sulfide footwall vein in La Cantera (Zacatecas, Mexico) is examined by powder X‐ray diffraction, energy dispersive X‐ray spectroscopy, and chemical ICP‐OES analyses. The influence of the detected impurities on the thermoelectric parameters (i.e. thermopower, electrical and thermal conductivities) is discussed. Thermoelectric figure of merit, ZT, of the studied natural minerals is found to be of the same order of magnitude (ca. 10^–3) as reported for CuFeS₂ synthesized in the laboratory.     

Characterization of kaolinite/emulsion-polymerization styrene butadiene rubber (ESBR) nanocomposite prepared by latex blending method: Dynamic mechanic properties and mechanism

The latex blending method was chosen to prepare Kaolinite/emulsion-polymerization styrene butadiene rubber (ESBR) nanocomposite to improve the interaction between filler particles and rubber matrix chains. The influences of kaolinite particles size, filler contents, and flocculants types on dynamic mechanical properties and the relative reinforcement mechanism of the prepared composite were systematic investigated and proposed. The transmission electron microscopy (TEM) and scanning electron microscopy (SEM) showed that the kaolinite particles were finely dispersed into the rubber matrix and arranged in parallel orientation. The prepared nanocomposites by latex blending exhibited improved crosslinking characteristic and dynamic mechanical parameters. The KAl (SO₄)₂ flocculant presented obvious modification in dynamic properties and crosslinking characteristic. Both the decrease in kaolinite particle size and the increase in kaolinite content can greatly improve the storage modulus and reinforcing effect of kaolinite/ESBR nanocomposites. The dynamic reinforcement mechanism of kaolinite can be explained by filler network including a certain thickness of rubber shell on the surface of kaolinite lamellar structure and the aggregations network between kaolinite particles The optimum way to balance the dynamic properties of rubber nanocomposites at different temperatures is to reduce the surface difference between kaolinite and rubber matrix and the degree of filler-filler networking on the basis of kaolinite with nanoscale (nanometer effect).     

Improving thermal and ozone stability of skim natural rubber by diimide reduction

The physical, chemical and thermal properties of diene-based polymers are improved by a chemical modification method such as hydrogenation. Skim natural rubber (SNR) which is mainly comprised of cis-1,4-polyisoprene was hydrogenated by diimide reduction in latex form, using hydrazine and hydrogen peroxide with copper sulfate as catalyst. The effect of various parameters on the level of hydrogenation calculated from proton nuclear magnetic resonance spectroscopy (¹H NMR) was investigated. The kinetic results indicated that the diimide hydrogenation of skim natural rubber latex (SNRL) exhibited a first order behavior with respect to the CC concentration. The apparent activation energy of the catalytic and non-catalytic hydrogenation of SNRL was calculated as 9.5 and 21.1 kJ/mol, respectively. From the TEM micrograph of hydrogenated SNRL particles, non-hydrogenated rubber core and hydrogenated rubber layer were observed according to a layer model. The results from thermal analysis confirmed that thermal stability of hydrogenated SNR was improved compared with the starting SNR. In addition, the thermal aging and ozone resistance of vulcanized hydrogenated SNR blends were also investigated.     

Solid polyelectrolyte (SPE) membranes containing a textured platinum catalyst

Perfluorinated cation-exchange flat-sheet membranes were treated with cetyltrimethylammonium bromide surfactant (CH₃(CH₂)₁₅N(CH₃)₃Br) to investigate the effect of the membranes modification with the surfactant on the morphology of deposition of a Pt catalyst. The electroless chemical deposition of a platinum catalyst onto the membranes treated with the surfactant was achieved by the Takenaka–Torikai method. The effect of the membranes modification on their electrical conductivity was studied. The morphology of the platinum micro-particles deposited onto the membranes modified with the surfactant was investigated by means of atomic force microscopy (AFM).     

Preparation and characterization of protein‐free natural rubber

Protein‐free natural rubber was prepared by incubation of natural rubber latex with urea and polar organic solvent in the presence of surfactant. Effect of the polar organic solvent on the removal of the proteins was investigated with respect to chemical affinity and concentration of the solvents. Under a suitable condition, nitrogen content of the deproteinized natural rubber (DPNR) was 0.000 wt%, which was less than that of natural rubber deproteinized with proteolytic enzyme or urea in the presence of surfactant. The removal of all proteins from natural rubber was proved through FT‐IR spectroscopy. Changes in morphology of the DPNR were also investigated by transmission electron microscopy. Copyright © 2011 John Wiley & Sons, Ltd.     

Polystyrene/Fe3O4 composite latex via miniemulsion polymerization‐nucleation mechanism and morphology

In this research, oil‐based Fe₃O₄ nanoparticles were prepared by means of coprecipitation method followed by a surface modification using lauric acid. Oil‐based Fe₃O₄ could disperse in styrene, and polystyrene/Fe₃O₄ (PS/Fe₃O₄) composite particles were prepared via miniemulsion polymerization in the presence of potassium peroxide (KPS) as an initiator, sodium dodecyl sulphate as a surfactant, hexadecane or sorbitan monolaurate(Span 20) as a costabilizer. The effects of Fe₃O₄ content, homogenization energy, amount of initiator, amount of surfactant and costabilizer on the conversion, size distributions of droplets and latex particles, nucleation mechanism and morphology of composite latex particles were investigated. The results showed that different nucleation mechanisms dominated during the course of reaction when polymerization conditions changed. The most important two key factors to influence the nucleation mechanism were homogenization energy and initiator. High homogenization energy provided critically stabilized size of droplets. Otherwise, secondary nucleation, including micellar and/or homogeneous nucleation, would take place rather than droplet nucleation when a water‐soluble initiator, KPS, was used. It resulted in two populations of latex particles, pure PS particles in smaller size and PS/Fe₃O₄ composite particles in larger size. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1014–1024, 2008