Lipase-catalyzed interesterification of soybean oil with an omega-3 polyunsaturated fatty acid concentrate prepared from sardine oil

To reduce the content of linoleoyl moiety in soybean oil, soybean oil that contains 53.0% linoleoyl moiety as molar acyl moiety composition was interesterified with an omega-3 polyunsaturated fatty acid (PUFA) concentrate (24.0 mol% eicosapentaenoic acid [EPA], 40.4 mol% docosahexaenoic acid [DHA]) prepared from sardine oil, using an immobilized sn-1,3-specific lipase from Rhizomucor miehei (Lipozyme IM). The reaction was carried out in a batch reactor at 37 degrees C under the following conditions: 500 micromol of soybean oil, molar ratio of omega-3 PUFA concentrate to soybean oil = 1.0-6.0,5.0 mL of heptane, and 30 batch interesterification units of enzyme. After the reaction time of 72 h, modified soybean oil, which contains 34.9% linoleoyl, 10.1% eicosapentaenoyl, and 14.2% docosahexaenoyl moieties, was produced at the molar reactant ratio of 6.0. In this oil, the total omega-3 acyl moiety composition reached 34.1%; the molar ratio of omega-3 to omega-6 acyl moieties was enhanced by five times compared with soybean oil. Compared with palmitic acid, DHA was kinetically six times less reactive, although the EPA was by 16% more reactive.     

In Vitro and In Vivo Digestibility of Soybean,Fish, and Microalgal Oils,and Their Influences on Fatty Acid Distribution in Tissue Lipid of Mice

The digestion rates of microalgal (docosahexaenoic acid, DHA, 56.8%; palmitic acid, 22.4%), fish (DHA, 10.8%; eicosapentaenoic acid, EPA, 16.2%), and soybean oils (oleic, 21.7%; linoleic acid, 54.6%) were compared by coupling the in vitro multi-step and in vivo apparent digestion models using mice. The in vitro digestion rate estimated based on the released free fatty acids content was remarkably higher in soybean and fish oils than in microalgal oil in 30 min; however, microalgal and fish oils had similar digestion rates at longer digestion. The in vivo digestibility of microalgal oil (91.49%) was lower than those of soybean (96.50%) and fish oils (96.99%). Among the constituent fatty acids of the diet oils, docosapentaenoic acid (DPA) exhibited the highest digestibility, followed by EPA, DHA, palmitoleic, oleic, palmitic, and stearic acid, demonstrating increased digestibility with reduced chain length and increased unsaturation degree of fatty acid. The diet oils affected the deposition of fatty acids in mouse tissues, and DHA concentrations were high in epididymal fat, liver, and brain of mice fed microalgal oil. In the present study, microalgal oil showed lower in vitro and in vivo digestibility, despite adequate DHA incorporation into major mouse organs, such as the brain and liver.     

Determination of the fatty acid composition of saponified vegetable oils using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

A method using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) for the determination of the fatty acid composition of vegetable oils is described and illustrated with the analysis of palm kernel oil, palm oil, olive oil, canola oil, soybean oil, vernonia oil, and castor oil. Solutions of the saponified oils, mixed with the matrix, meso-tetrakis(pentafluorophenyl)porphyrin, provided reproducible MALDI-TOF spectra in which the ions were dominated by sodiated sodium carboxylates [RCOONa + Na]+. Thus, palm kernel oil was found to contain capric acid, lauric acid, myristic acid, palmitic acid, oleic acid, and stearic acid. Palm oil had a fatty acid profile including palmitic, linoleic, oleic, and stearic. The relative percentages of the fatty acids in olive oil were palmitoleic (1.2 +/- 0.5), palmitic (10.9 +/- 0.8), linoleic (0.6 +/- 0.1), linoleic (16.5 +/- 0.8), and oleic (70.5 +/- 1.2). For soybean oil, the relative percentages were: palmitoleic (0.4 +/- 0.4), palmitic (6.0 +/- 1.3), linolenic (14.5 +/- 1.8), linoleic (50.1 +/- 4.0), oleic (26.1 +/- 1.2), and stearic (2.2 +/- 0.7). This method was also applied to the analysis of two commercial soap formulations. The first soap gave a fatty acid profile that included: lauric (19.4% +/- 0.8), myristic (9.6% +/- 0.5), palmitoleic (1.9% +/- 0.3), palmitic (16.3% +/- 0.9), linoleic (5.6% +/- 0.4), oleic (37.1% +/- 0.8), and stearic (10.1% +/- 0.7) and that of the second soap was: lauric (9.3% +/- 0.3), myristic (3.8% +/- 0.5), palmitoleic (3.1% +/- 0.8), palmitic (19.4% +/- 0.8), linoleic (4.9% +/- 0.7), oleic (49.5% +/- 1.1), and stearic (10.0% +/- 0.9). The MALDI-TOFMS method described in this communication is simpler and less time-consuming than the established transesterification method that is coupled with analysis by gas chromatography/mass spectrometry (GC/MS). The new method could be used routinely to determine the qualitative fatty acid composition of vegetable oils, and, when fully validated by comparison with standard analytical methodologies, should provide a relatively fast quantitative measurement of fatty acid mixtures and/or soap formulations that contain saturated and unsaturated hydrocarbon moieties.     

Application of the calorimetric and spectroscopic methods in analytical evaluation of the human milk fat substitutes

The aim of this paper was the analytical evaluation of human milk fat substitutes (HMFS) by the calorimetric and spectroscopic methods. The HMFS were obtained by enzymatic interesterification of blend of lard or milk fat with rapeseed oil and concentrate of fish oil. The enzymatic reactions were carried out at 60, 70, and 80 °C for 2 h. A commercially immobilized 1,3-specific lipase, Lipozyme RM IM, was used as a biocatalyst. Oxidative stability of HMFS was determined using the calorimetric method. The oxidative induction time was obtained from the pressure differential scanning calorimetry curves. Peroxide value (PV) and anisidine value were determined using spectroscopic method. Interesterification caused a decrease in oxidative stability. Samples with lower induction times were characterized by higher PV. There was also a strong relation between total polar compound content and induction time. The induction times obtained for analyzed fats can be used as primary parameters for the assessment of the resistance of tested fats to their oxidative decomposition.     

高效液相色谱法测定猪油甘油三酯中的脂肪酸位置分布

 建立了一种采用高效液相色谱法(HPLC)分析猪油甘油三酯中的脂肪酸组成及其位置分布的方法。利用sn-1,3位专一性脂肪酶对甘油三酯sn-1,3位上的脂肪酸进行水解,形成sn-2位甘油单酯和游离脂肪酸；之后,通过甘油三酯中脂肪酸总含量和sn-1,3位上脂肪酸含量之间的差值计算出sn-2位上的脂肪酸含量。利用2-溴苯乙酮仅同游离脂肪酸作用的特点,将脂肪酸酯化为苯乙酰甲酯,然后进行HPLC分析。分析所用色谱柱为ZORBAX SB C18柱,以十七酸作为内标，甲醇-乙腈-水为流动相,采用梯度洗脱(梯度洗脱程序为甲醇-乙腈-水由80∶10∶10（体积比，下同）在35 min内线性变化到86∶10∶4,然后在5　min内恢复到起始比例，流动相流速为1 mL/min),通过测定苯乙酰甲酯在254 nm处的吸光度值来测定脂肪酸含量。结果表明,猪油甘油三酯中的脂肪酸主要是棕榈酸和油酸(分别占总量的26.61%和43.18%),其中油酸主要分布于sn-1,3位上,而棕榈酸分布于sn-2位上。这些测定结果与传统气相色谱法的测定结果相吻合。该方法简单可行,省去了传统测定中费时的薄层色谱分离步骤,可成为一种有效的实验室分析方法。     

深海鱼油中脂肪酸的分析

用氢氧化四甲胺／甲醇酯化法使深海鱼油内的三酸甘油酯中的脂肪酸和游离脂肪酸转化成脂肪酸甲酯,用气相色谱和气相色谱／质谱进行分析,鉴定出４１个组分,并对其中的主要组分顺式－５,８,１１,１４,１７－十二碳五稀酸（ＥＰＡ）和顺式－４,７,１０,１３,１６,１９－二十二碳六烯酸（ＤＨＡ）建立了定量分析方法。方法的相对标准偏差分别为４．３％（ＥＰＡ）和４．７％（ＤＨＡ）。ＥＰＡ和ＤＨＡ的回收率分别为１００．     

Mass spectrometry characterisation of fatty acids from metabolically engineered soybean seeds

Improving the quality and performance of soybean oil as biodiesel depends on the chemical composition of its fatty acids and requires an increase in monounsaturated acids and a reduction in polyunsaturated acids. Despite its current use as a source of biofuel, soybean oil contains an average of 25 % oleic acid and 13 % palmitic acid, which negatively impacts its oxidative stability and freezing point, causing a high rate of nitrogen oxide emission. Gas chromatography and ion mobility mass spectrometry were conducted on soybean fatty acids from metabolically engineered seed extracts to determine the nature of the structural oleic and palmitic acids. The soybean genes FAD2-1 and FatB were placed under the control of the 35SCaMV constitutive promoter, introduced to soybean embryonic axes by particle bombardment and down-regulated using RNA interference technology. Results indicate that the metabolically engineered plants exhibited a significant increase in oleic acid (up to 94.58 %) and a reduction in palmitic acid (to <3 %) in their seed oil content. No structural differences were observed between the fatty acids of the transgenic and non-transgenic oil extracts.

气相色谱-质谱联用鉴定基于水酶法制备的虹鳟鱼骨油组分

采用水酶法制备虹鳟鱼骨油,单因素分析法优化虹鳟鱼骨酶解的工艺条件,考察了料液比、pH值、酶解时间、酶解温度、加酶量5个因素对鱼油提取率的影响,采用气相色谱-质谱联用 (GC-MS) 技术对鱼骨油的脂肪酸组成和含量进行了分析鉴定.结果表明,在55℃、pH 7.5、酶解时间为3 h、料液比为1∶1、加酶量为2000 U/g的条件下,利用碱性蛋白酶提取的虹鳟鱼骨油中的油脂含量最高.GC-MS分析结果表明,虹鳟鱼骨油中主要成分是不饱和脂肪酸,含量为脂肪酸总量的80.4% (w/w),其中单不饱和脂肪酸和多不饱和脂肪酸分别约占不饱和脂肪酸的76.9%和23.1% (w/w), DHA和EPA的总量为3.4% (w/w).本研究优化了虹鳟鱼油的提取技术,对虹鳟鱼油的主要挥发性物质进行了分析鉴定,初步确定了其中对鱼油风味起主要贡献的物质,对鱼油产品的分析与鉴别具有参考价值.     

高效液相色谱法分离制备鱼油中的EPA和DHA

采用反相高效液相色谱技术,以μ－ＢｏｎｄａｐａｋＣ１８作固定相,ＣＨ３ＯＨ／ＴＨＦ／Ｈ２Ｏ作流动相,对鱼同中的二十碳五烯酸（ＥＰＡ）和二十二碳六烯酸（ＤＨＡ）进行了分离纯化,制备溶液经减压蒸馏,乙酸乙酯萃取后所得ＥＰＡ和ＤＨＡ质量分数可分别达到９８％和８６％以上。     

Clean synthesis of biodiesel over solid acid catalysts of sulfonated mesopolymers

FDU-15-SO₃H, a solid acid material prepared from the sulfonation of FDU-15 mesoporous polymer, has been demonstrated to serve as an efficient catalyst in the esterification of palmitic acid with methanol as well as in the transesterification of fatty acid-edible oil mixture. FDU-15-SO₃H achieved an acid conversion of 99.0% when the esterification was carried out at 343 K with a methanol/palmitic acid molar ratio of 6:1 and 5 wt% catalyst loading. It was capable of giving 99.0% yield of fatty acid methyl esters (FAME) when the transesterification of soybean oil was performed at 413 K and the methanol/oil weight ratio of 1:1. FDU-15-SO₃H was further applied to the transesterification/esterification of the oil mixtures with a varying ratio of soybean oil to palmitic acid, which simulated the feedstock with a high content of free fatty acids. The yield of FAME reached 95% for the oil mixtures containing 30 wt% palmitic acid. This indicated the sulfonated mesopolymer was a potential catalyst for clean synthesis of fuel alternative of biodiesel from the waste oil without further purification.     

Fatty acid composition and volatile compounds of caviar from farmed white sturgeon (Acipenser transmontanus)

The present study was conducted to characterize caviar obtained from farmed white sturgeons (Acipenser transmontanus) subjected to different dietary treatments. Twenty caviar samples from fish fed two experimental diets containing different dietary lipid sources have been analysed for chemical composition, fatty acids and flavour volatile compounds. Fatty acid make up of caviar was only minimally influenced by dietary fatty acid composition. Irrespective of dietary treatments, palmitic acid (16:0) and oleic acid (OA, 18:1 n-9) were the most abundant fatty acid followed by docosahexaenoic acid (DHA, 22:6 n-3) and eicopentaenoic (EPA, 20:5 n-3). Thirty-three volatile compounds were isolated using simultaneous distillation-extraction (SDE) and identified by GC-MS. The largest group of volatiles were represented by aldehydes with 20 compounds, representing the 60% of the total volatiles. n-Alkanals, 2-alkenals and 2,4-alkadienals are largely the main responsible for a wide range of flavours in caviar from farmed white surgeon.     

复热食用植物油结构变化的红外吸收光谱分析

利用衰减全反射(ATR)傅立叶红外光谱(FTIRS)法对市售优质品牌的8种植物油(转基因豆油、非转基因豆油、葵花籽油、花生油、玉米油、红花籽油、调和油、橄榄油)未加热及反复高温加热后的红外二阶导数光谱进行比较,发现复热食用油在反复高温加热下会使不饱和脂肪酸亚油酸、亚麻酸的含量降低,饱和脂肪酸棕榈酸和硬脂酸的含量增加;顺式脂肪酸的含量下降,反式脂肪酸的含量明显增加。确定以二阶导数光谱中3 009、988、966 cm-13处特征吸收峰的峰高判定是否为反复加热用油。此方法样品用量少、分析速度快,可从整体上了解油品的质量及成分,并可作为市场复热食用油的快速筛查方法,也可为地沟油检测方法的建立提供理论依据。     

Analysis of thermal,oxidative and cold flow properties of methyl and ethyl esters prepared from soybean and mustard oils

Oilseed crop with high oil content and promising ecological adaptability are potential sources for competitive biodiesel production. This study investigates the scope of utilizing biodiesel development through the methyl and ethyl ester from soybean and mustard oil as an alternative fuel. Methyl and ethyl esters of oils having different fatty acids compositions such as soybean (SOME and SOEE) and mustard oil (MUME and MUEE) were prepared by transesterification with methanol and ethanol in the presence of an alkali-KOH catalyst. The gas chromatographic (GC) analysis of oil samples revealed that primary fatty acid composition in soybean oil was linoleic acid (C_18:2, 51.93%), followed by oleic acid (C_18:1, 22.82%), palmitic acid (C_16:0, 11.56%), linolenic acid (C_18:3, 5.95%) and stearic acid (C_18:0, 4.32%). Whereas, the main components in mustard oil were erucic acid (C_22:1, 32.81%), oleic acid (C_18:1, 24.98%), eicosenoic acid (C_20:1, 10.44%), linolenic acid (C_18:3, 8.61%) and palmitic acid (C_16:0, 2.80%). The physicochemical properties (acid value, iodine value, calorific value, flash point, pour point etc.) of methyl and ethyl ester samples were estimated and found to be within the acceptable range of ASTM D6751 standards specifications. The prepared esters and oil samples were examined for cold flow properties by differential scanning calorimetry (DSC). Results revealed better cold flow properties for MUME (−2.55 °C) and MUEE (−3.10 °C) than SOME (3.21 °C) and SOEE (1.83 °C) due to more unsaturated fatty acid content in MU. Thermal and oxidative stability of samples was determined by thermogravimetric analysis (TG) and differential thermal analysis (DTA). The thermal and oxidative stability ranking of the samples was in the order of oil > methyl esters > ethyl esters.

     

GC／MS法分析鳗鱼骨油的脂肪酸

用乙醚／已烷混合溶剂抽提鳗鱼骨油，用ＫＯＨ－ＣＨ_３ＯＨ酯交换法甲酯化，以毛细管色谱／质谱方法测定脂肪酸的组成。共检出２７种脂肪酸，其中以棕榈油酸、棕榈酸、油酸、硬脂酸、花生烯酸为主。     

Fatty Acid Composition of Tobacco Seed Oil and Synthesis of Alkyd Resin

The fatty acid composition of tobacco seed oil revealed that the oil is rich in unsaturated fatty acids, having linoleic acid （71.63%）, oleic acid （13.46%） and palmitic acid （8.72%） as the most abundant unsaturated and saturated fatty acids respectively. So the tobacco oil was characterized as semi-drying type on the basis of fatty acid composition. The synthesis of alkyd resin was carried out by alcoholysis or monoglyceride process using an alkali refined tobacco seed oil, pentaerythritol, cis-1,2,3,6-tetrahydrophthalic anhydride along with lithium hydroxide as catalyst. The alkyd resin so prepared was found to be bright and of low color with high gloss. The drying and hardness properties and adhesion of the tobacco seed oil derived alkyd resin were also found a bit superior to those of other alkyd resins of the same oil length. In addition, the water and acid resistance of the said alkyd was also found comparable to the other alkyds.     

杏仁油的物化性能及其脂肪酸组成的分析

用３种不同溶剂萃取杏仁得到杏仁油,并对其物化常数进行测定。杏仁油用饱和氢氧化钾 甲醇皂化,再用甲醇 硫酸（体积比为４∶１）甲酯化后,将乙醚萃取液作气相色谱分析。太原杏仁油中脂肪酸的主要成分为油酸（Ｃ１８∶１,质量分数约６８％）和亚油酸（Ｃ１８∶２,质量分数约２５％）,少量棕榈酸（Ｃ１６∶０）、棕榈烯酸（Ｃ１６∶１）和硬脂酸（Ｃ１８∶０）,微量花生酸（Ｃ２０∶０）。     

Preparation of a Crosslinked Bioimprinted Lipase for Enrichment of Polyunsaturated Fatty Acids from Fish Processing Waste

Geotrichum sp. lipase modified with a combined method composed of crosslinking and bioimprinting was employed to selectively hydrolyze waste fish oil for enrichment of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) in glycerides. Crosslinked polymerization by monomer (polyethylene glycol 400 dimethyl acrylate), crosslinker (trimethylolpropane trimethylacrylate), and photoinitiator (benzoin methyl ether) coupled to bioimprinting using palmitic acid as imprint molecule, resulted in much more effective enzyme preparation used in aqueous hydrolysis reaction. Since the crosslinked polymerization modification maintained bioimprinted property and gave good dispersion of enzyme in reaction mixture, the crosslinked bioimprinted enzyme exhibited higher hydrolysis temperature, enhanced specific activity, shorter hydrolysis time, and better operational stability compared to free lipase. Crude fish oil was treated at 45 °C with this crosslinked bioimprinted lipase for 8 h, and 46% hydrolysis degree resulted in the production of glycerides containing 41% of EPA and DHA (EPA+DHA), achieving 85.7% recovery of initial EPA and DHA. The results suggested that bioimprinted enzymes did not lose their induced property in aqueous environment when prepared according to the described crosslinking–bioimprinting method. It could also be seen that the crosslinked bioimprinted lipase was effective in producing glycerides that contained a higher concentration of polyunsaturated fatty acid with better yield.     

Effects of fatty acids on growth and poly-3-hydroxybutyrate production in bacteria

The effects of saturated and unsaturated fatty acids (lauric acid, palmitic acid, steric acid, oleic acid, linoleic acid, soybean oil) on Sphaerotilus natans, 0B17 (Pseudomonas sp.), and recombinant Escherichia coli DH5(/pUC19/CAB were studied. Oleic acid enhances Poly-3-hydroxybutyrate (PHB) production in these three bacterial strains, suggesting that the single double bond of the acid activates the polyhydroxylkanoate accumulation enzymatic reaction. Under the effect of lauric acid and linoleic acid, the growth of S. natans and 0B17 were totally inhibited. However, the enhanced PHB accumulation in recombinant E. coli was observed.     

Lipase-Catalyzed Acidolysis of Palm Mid Fraction Oil with Palmitic and Stearic Fatty Acid Mixture for Production of Cocoa Butter Equivalent

Cocoa butter equivalent (CBE) was prepared by enzymatic acidolysis reaction of substrate consisting of refined palm mid fraction oil and palmitic–stearic fatty acid mixture. The reactions were performed in a batch reactor at a temperature of 60 °C in an orbital shaker operated at 160 RPM. Different mass ratios of substrates were explored, and the composition of the five major triacylglycerols (TAGs) of the structured lipids was identified and quantified using cocoa butter certified reference material IRMM-801. The reaction resulted in production of cocoa butter equivalent with the TAGs' composition (1,3-dipalmitoyl-2-oleoyl-glycerol 30.7 %, 1-palmitoyl-2-oleoyl-3-stearoyl-rac-glycerol 40.1%, 1-palmitoy-2,3- dioleoyl glycerol 9.0 %, 1,3-distearoyl-2-oleoyl-glycerol 14.5 %, and 1-stearoyl-2,3-dioleoyl glycerol 5.7 %) and with onset melting temperature of 31.6 °C and peak temperature of 40.4 °C which are close to those of cocoa butter. The proposed kinetics model for the acidolysis reaction presented the experimental data very well. The results of this research showed that palm mid fraction oil TAGs could be restructured to produce value added product such as CBE.     

Determination of docosahexaenoic acid and n-3 fatty acids in refined fish oils by 1H-NMR spectroscopy: IUPAC interlaboratory study

A high-resolution proton nuclear magnetic resonance (NMR) method for determining the concentration (mg/g) of docosahexaenoic acid (DHA), the molar proportion (mol%) of DHA, and the molar proportion of total n-3 fatty acids in fish oils was validated by an IUPAC interlaboratory study (the Commission VI-6 on Oils, Fats, and Derivatives WG 3/98). Thirteen laboratories from 5 countries tested 6 pairs of blind duplicate fish oils: a refined tuna oil, 2 extracted tuna oils, an extracted bonito oil, an extracted salmon oil, and an extracted sardine oil ranging from 9 to 30 mol% DHA and from 20 to 35 mol% n-3 fatty acids. Before 1 D-proton NMR measurements with 300-500 MHz instruments, oil samples were weighed and diluted with deuterochloroform solution containing ethylene glycol dimethyl ether as internal standard. To achieve precise performance, a detailed procedure for signal area measurement was described in the protocol, and all participants were instructed about the critical importance of following the protocol. Statistical performances with invalid and outlier data removed were as follows: repeatability relative standard deviations (RSDr) ranged from 0.91 to 2.62% and reproducibility relative standard deviation (RSDR) ranged from 1.73 to 4.27% for DHA concentration (mg/g); RSDr ranged from 0.39 to 2.06%, and RSDR ranged from 0.59 to 3.46% for mol% DHA; RSDr ranged from 0.23 to 0.90% and RSDR ranged from 0.85 to 2.01 % for mol% total n-3 fatty acids. The method is expected to be recommended by IUPAC.