DIFFRACTION AND HOLOGRAPHY WITH PHOTOELECTRONS AND FLUORESCENT X-RAYS

We consider studies of the atomic and magnetic structure near surfaces by photoelectron diffraction and by the holographic inversion of both photoelectron diffraction data and diffraction data involving the emission of fluorescent x-rays. The current status of photoelectron diffraction studies of surfaces, interfaces, and other nanostructures is first briefly reviewed, and then several recent developments and proposals for future areas of application are discussed. The application of full-solid-angle diffraction data, together with simultaneous characterization by low energy electron diffraction and scanning tunneling microscopy, to the epitaxial growth of oxides and metals is considered. Several new avenues that are being opened up by third-generation synchrotron radiation sources are also discussed. These include site-resolved photoelectron diffraction from surface and interface atoms, the possibility of time-resolved measurements of surface reactions with chemical-state resolution, and circular dichroism in photoelectron angular distributions from both non-magnetic and magnetic systems. The addition of spin to the photoelectron diffraction measurement is also considered as a method for studying short-range magnetic order, including the measurement of surface magnetic phase transitions. This spin sensitivity can be achieved through either core-level multiplet splittings or circular-polarized excitation of spin-orbit-split levels. The direct imaging of short-range atomic structure by both photoelectron holography and two distinct types of x-ray holography involving fluorescent emission is also discussed. Both photoelectron and x-ray holography have demonstrated the ability to directly determine at least approximate atomic structures in three dimensions. Photoelectron holography with spin resolution may make it possible also to study short-range magnetic order in a holographic fashion. Although much more recent in its first experimental demonstrations, x-ray fluorescence holography should permit deriving more accurate atomic images for a variety of materials, including both surface and bulk regions.     

Influence of process parameters on the sol–gel synthesis of nano hydroxyapatite using various phosphorus precursors

Hydroxyapatite Ca₁₀(PO₄)₆(OH)₂ has attracted widespread interest from both orthopedic and dental fields due to its excellent biocompatibility and tissue bioactivity properties. Since nanophase materials can mimic the dimensions of constituent components of natural tissues, the implants developed from nanophase material could serve as a successful alternative. However, the defects of hydroxyapatite ceramics, mainly brittleness and low fracture toughness, have been overcome by the use of nanophase hydroxyapatite coatings on the implant surfaces that integrate the good mechanical properties of metals and the bioactivity of hydroxyapatite. In the present investigation, Sol?Cgel hydroxyapatite was prepared from two different phosphorus precursors such as triethyl phosphate and phosphorus pentoxide respectively with calcium nitrate tetrahydrate as a calcium precursor. The effects of pH and liquid P³¹ Nuclear Magnetic Resonance spectroscopy for the solution aged at different periods were investigated and the synthesized hydroxyapatite powder was characterized by Transmission electron microscopy, X-ray Powder Diffraction, Fourier transform infrared spectroscopy and thermal analysis respectively. In order to fully understand the bioactivity of the synthesized materials, they were coated on 316L Stainless Steel implant surface by spin coating method at the spin speed of 2,000 Revolutions per minute. The effect of nanoparticles on the surface of 316L Stainless Steel implant was studied by adhesive strength measurements. The corrosion resistance property of the hydroxyapatite coatings was evaluated by electrochemical impedance analysis. From the results, it was observed that the hydroxyapatite coatings obtained from different precursors have very high resistance to corrosion with higher adhesive strength.     

Effect of thermal annealing of poly(3-octylthiophene) films covered stainless steel on corrosion properties

The effect of thermal annealing of poly(3-octylthiophene) (P3OT) coatings on the corrosion inhibition of stainless steel in an NaCl solution was investigated. P3OT was synthesized by direct oxidation of the 3-octylthiophene monomer with ferric chloride (FeCl₃) as oxidant. P3OT films were deposited by drop-casting technique onto 304 stainless steel electrode (304SS). 304SS coated with P3OT films were thermally annealed during 30 h at different temperatures (55°C, 80°C, and 100°C). The corrosion resistance of stainless steel coated with P3OT in 0.5 M NaCl aqueous solution at room temperature was investigated by using potentiodynamic polarization curves, linear polarization resistance, and electrochemical impedance spectroscopy. The results indicated that the thermal treatment at 80°C and 100°C of P3OT films improved the corrosion resistance of the stainless steel in NaCl solution; the speed of corrosion diminished in an order of magnitude with regard to the 304SS. In order to study the temperature effect in the morphology of the coatings before and after the corrosive environment and correlate it with corrosion protection, atomic force microscopy and scanning electron microscopy were used. Morphological study showed that when the films are heated, the grain size increased and a denser surface was obtained, which benefited the barrier properties of the film.     

Universal and state-resolved imaging of chemical dynamics

We showcase the use of high-resolution ion imaging with complementary state-resolved and "universal" vacuum ultraviolet probes to address a broad range of fundamental problems in chemical reaction dynamics. Examples from our recent work include applications in state-correlated unimolecular reactions, ion pair dissociation dynamics and spectroscopy, crossed-beam reactive scattering, and atomic angular momentum polarization in photodissociation. These studies are all directed to achieving a detailed understanding of atomic and molecular interactions, with particular emphasis on reaction mechanisms outside the scope of transition state theory; on spectroscopy and dynamics of highly excited, transient species; on nonadiabatic reaction mechanisms; and on chemical dynamics in polyatomic systems.     

Capture of polarized electrons into excited terms of fast atoms during grazing surface collisions

Fast ions are scattered from magnetized surfaces under grazing angles of incidence. During the interaction with the surface charge exchange is effective and results in a population of stable and excited atomic terms. This capture of electrons is characterized by anisotropic distributions of atomic orbital angular momenta and in addition — for magnetized targets — by anisotropic distributions of electronic spins. We will discuss in some detail, how these anisotropic distributions can be studied via the analysis of the state of polarization of the fluorescent light, emitted in electronic transitions from excited terms of free atoms after the impact with the surface. We show that a defined variation of the magnetization of the target affects the polarization of the emitted light in a characteristic way, which allows to deduce the electronic spin polarization of the atoms. The method implies some perspectives with respect to the study of magnetic properties of the vacuum-solid interface well above the topmost layer of surface atoms.     

The Covalent Functionalization of Layered Black Phosphorus by Nucleophilic Reagents

Layered black phosphorus has been attracting great attention due to its interesting material properties which lead to a plethora of proposed applications. Several approaches are demonstrated here for covalent chemical modifications of layered black phosphorus in order to form P−C and P‐O‐C bonds. Nucleophilic reagents are highly effective for chemical modification of black phosphorus. Further derivatization approaches investigated were based on radical reactions. These reagents are not as effective as nucleophilic reagents for the surface covalent modification of black phosphorus. The influence of covalent modification on the electronic structure of black phosphorus was investigated using ab initio calculations. Covalent modification exerts a strong effect on the electronic structure including the change of band‐gap width and spin polarization.     

Investigation of ferromagnetic surfaces with spin polarized metastable He(23 S) atoms

Electron spectra of tungsten (110) and of thin cobalt (0001) films, clean and after oxygen exposure, have been taken using metastable de-excitation spectroscopy (MDS). The spectra of remanently magnetized Co(0001), obtained with spin polarized MDS (SPMDS), show different intensities in the cobalt induced structure when reversing the polarization of the incident spin polarized He(2³ S) atomic beam. Due to theextreme surface sensitivity and thespin selectivity of the de-excitation process, this is evidence of differences in thespin resolved density of states of theoutermost cobalt layer.     

Electronic structure study by means of x-ray spectroscopy and theoretical calculations of the "ferric star" single molecule magnet

The electronic structure of the single molecule magnet system {M[Fe(L(1))(2)](3)}4CHCl(3) [M=Fe,Cr;L(1)=CH(3)N(CH(2)CH(2)O)(2) (2-)] has been studied using x-ray photoelectron spectroscopy, x-ray-absorption spectroscopy, soft-x-ray emission spectroscopy, as well as theoretical density-functional-based methods. There is a good agreement between theoretical calculations and experimental data. The valence band mainly consists of three bands between 2 and 30 eV. Both theory and experiments show that the top of the valence band is dominated by the hybridization between Fe 3d and O 2p bands. From the shape of the Fe 2p spectra it is argued that Fe in the molecule is most likely in the 2+ charge state. Its neighboring atoms (O,N) exhibit a magnetic polarization yielding effective spin S=52 per iron atom, giving a high-spin state molecule with a total S=5 effective spin for the case of M=Fe.     

Structure of isolated and solvated peroxyl radicals

We have investigated the structure of HO₂ and a series of alkyl peroxyl radicals ROO using a variety of quantum mechanical methods. We first compute the geometries, vibrational frequencies, electronic charge distributions, and spin densities for the series of radicals considered in the gas phase. Significant differences with respect to previous calculations have been pointed out in a few cases. In particular, we show the fundamental importance of electronic correlation when computing net atomic charges and spin densities, which have generally been estimated in the litterature by means of Hartree–Fock SCF electronic densities. Solvation effects on the geometry and electronic structure have been estimated by carrying out self-consistent reaction field computations in a polarizable continuum environment with relative dielectric permittivity equal to that of liquid water. Large electronic polarization is predicted in such conditions. This may be important in order to understand reactive properties of the radicals in different media. ©1999 John Wiley & Sons, Inc. J Comput Chem 20: 1039–1048, 1999     

Probing signal amplification by reversible exchange using an NMR flow system

Hyperpolarization methods are used in NMR to overcome its inherent sensitivity problem. Herein, the biologically relevant target nicotinamide is polarized by the hyperpolarization technique signal amplification by reversible exchange. We illustrate how the polarization transfer field, and the concentrations of parahydrogen, the polarization‐transfer‐catalyst and substrate can be used to maximize signal amplification by reversible exchange effectiveness by reference to the first‐order spin system of this target. The catalyst is shown to be crucial in this process, first by facilitating the transfer of hyperpolarization from parahydrogen to nicotinamide and then by depleting the resulting polarized states through further interaction. The 15 longitudinal one, two, three and four spin order terms produced are rigorously identified and quantified using an automated flow apparatus in conjunction with NMR pulse sequences based on the only parahydrogen spectroscopy protocol. The rates of build‐up of these terms were shown to follow the order four~three > two > single spin; this order parallels their rates of relaxation. The result of these competing effects is that the less‐efficiently formed single‐spin order terms dominate at the point of measurement with the two‐spin terms having amplitudes that are an order of magnitude lower. We also complete further measurements to demonstrate that ¹³C NMR spectra can be readily collected where the long‐lived quaternary ¹³C signals appear with significant intensity. These are improved upon by using INEPT. In summary, we dissect the complexity of this method, highlighting its benefits to the NMR community and its applicability for high‐sensitivity magnetic resonance imaging detection in the future. © 2014 The Authors. Magnetic Resonance in Chemistry by John Wiley & Sons, Ltd.     

Surface properties of biospecific coatings based on polyelectrolyte complexes of maleic acid copolymers

The surface properties of PE with bilayer and multilayer coatings based on polyelectrolyte complexes of the biospecific modified N-vinylpyrrolidone-maleic acid copolymer with chitosan, amphiphilic chitosan, or albumin have been investigated by atomic force microscopy, multiple attenuated total reflection spectroscopy, X-ray photoelectron spectroscopy, and goniometry. The copolymer of N-vinylpyrrolidone and maleic acid contains affine ligands to plasminogen—fragments of α-amino-bonded lysine—and imparts thromboresistant properties to the surface being modified. The surface morphology and the size of particles of deposited intermediate layers of chitosan or albumin differ from those of the bilayer (multilayer) coatings containing an additional external layer of the biospecific copolymer. The deposition of the multilayer polymeric coatings promotes a more thorough coverage of the protected surface. Characteristic absorption bands that demonstrate the presence of the modifying polymers on the PE surface have been revealed; this fact is also confirmed by the X-ray photoelectron spectroscopy data on the atomic composition of the analyzed surface. A significant increase in the hydrophilicity of the modified surface is established by the contact angle technique.     

Heteronuclear proton assisted recoupling

We describe a theoretical framework for understanding the heteronuclear version of the third spin assisted recoupling polarization transfer mechanism and demonstrate its potential for detecting long-distance intramolecular and intermolecular (15)N-(13)C contacts in biomolecular systems. The pulse sequence, proton assisted insensitive nuclei cross polarization (PAIN-CP) relies on a cross term between (1)H-(15)N and (1)H-(13)C dipolar couplings to mediate zero- and∕or double-quantum (15)N-(13)C recoupling. In particular, using average Hamiltonian theory we derive effective Hamiltonians for PAIN-CP and show that the transfer is mediated by trilinear terms of the form N(±)C(?)H(z) (ZQ) or N(±)C(±)H(z) (DQ) depending on the rf field strengths employed. We use analytical and numerical simulations to explain the structure of the PAIN-CP optimization maps and to delineate the appropriate matching conditions. We also detail the dependence of the PAIN-CP polarization transfer with respect to local molecular geometry and explain the observed reduction in dipolar truncation. In addition, we demonstrate the utility of PAIN-CP in structural studies with (15)N-(13)C spectra of two uniformly (13)C,(15)N labeled model microcrystalline proteins-GB1, a 56 amino acid peptide, and Crh, a 85 amino acid domain swapped dimer (MW=2×10.4 kDa). The spectra acquired at high magic angle spinning frequencies (ω(r)∕2π>20 kHz) and magnetic fields (ω(0H)∕2π=700-900 MHz) using moderate rf fields, yield multiple long-distance intramonomer and intermonomer (15)N-(13)C contacts. We use these distance restraints, in combination with the available x-ray structure as a homology model, to perform a calculation of the monomer subunit of the Crh protein.     

Vibrational mode selectivity in hyperfine interactions: polarization quantum beat spectroscopy of HCF(A1A")

We report on the vibrational mode dependence of the 19F and 1H hyperfine interaction constants in the A1A" state of HCF, determined using polarization quantum beat spectroscopy. The nuclear spin/overall rotation coupling constants display a pronounced energy dependence and mode selectivity which can be traced to variations in both the A rotational constant and nuclear spin/electron orbital coupling constant a. In particular, modes containing C-F stretching excitation display significantly larger 19F spin-rotation constants, which is explained in terms of a decrease in back donation of electron density into the C 2p(pi) orbitals.     

Ultrafast charge transfer and atomic orbital polarization

The role of orbital polarization for ultrafast charge transfer between an atomic adsorbate and a substrate is explored. Core hole clock spectroscopy with linearly polarized x-ray radiation allows to selectively excite adsorbate resonance states with defined spatial orientation relative to the substrate surface. For c(4 x 2)S/Ru(0001) the charge transfer times between the sulfur 2s(-1)3p*+1 antibonding resonance and the ruthenium substrate have been studied, with the 2s electron excited into the 3p perpendicular* state along the surface normal and the 3p parallel* state in the surface plane. The charge transfer times are determined as 0.18+/-0.07 and 0.84+/-0.23 fs, respectively. This variation is the direct consequence of the different adsorbate-substrate orbital overlap.     

Protecting Aluminum from Atmospheric Corrosion via Surface Hydrophobization with Stearic Acid and Trialkoxysilanes

The possibility of subjecting aluminum to hydrophobization and superhydrophobization (SHP) with ethanol solutions of trialkoxysilanes and stearic acid is explored. It is shown that SHP coatings are highly effective in protecting Al against atmospheric corrosion. The thicknesses of surface SHP layers are determined via X-ray photoelectron spectroscopy and ellipsometry. The protective ability of SHP coatings is determined by polarization measurements and corrosion tests in a salt fog chamber.     

Poly(3-octylthiophene) and polystyrene blends thermally treated as coatings for corrosion protection of stainless steel 304

The effect of thermal annealing of poly(3-octylthiophene) (P3OT) and polystyrene (PS) blend coatings on the corrosion inhibition of stainless steel in a 0.5 M NaCl solution was investigated. P3OT was synthesized by direct oxidation of the 3-octylthiophene monomer with ferric chloride (FeCl₃) as oxidant. Stainless steel electrodes with mirror finish were coated with P3OT/PS blend by drop-casting technique. In order to study the temperature effect on the function like physical barrier against the corrosive species of P3OT/PS polymeric blend, the coatings were thermally annealed at three different temperatures (55?°C, 80?°C, and 100?°C). The corrosion behavior of P3OT/PS-coated stainless steel was investigated in 0.5 M NaCl at room temperature, by using potentiodynamic polarization curves, linear polarization resistance (LPR), and electrochemical impedance spectroscopy. The LPR values indicated that, at 100?°C, P3OT/PS coatings showed a better protection of the 304 stainless steel in 0.5 M NaCl; the corrosion rate diminished in two orders of magnitude with regard to the bare stainless steel. The superficial morphology of the coatings before and after the corrosive environment was researched by atomic force microscopy, optic microscopy, and scanning electronic microscopy. Morphological study showed that the increased temperature benefited the integration of the two polymeric phases, which improved the barrier properties of the coatings. The coating/metal adhesion and the coating thickness were evaluated. The temperature increases the adhesion degree coating/substrate; thus, the coating annealed at 100?°C showed the best adhesion.     

Effect of spin polarization for hydrogen adsorbed on Si(111)(1×1) surface: First‐principles calculations

The role of spin polarization on adsorption of atomic and molecular hydrogen on Si(111)(1×1) surface is examined by comparing the results of the local spin density approximation (LSD) and those of the local density approximation (LDA). A large improvement of the adsorption energies (around 0.8 eV/H) was found for the H atom adsorbed on Si(111)(1×1) surface. The inclusion of spin polarization reduces the overbinding between the H atom and the silicon surface and its effect is much more pronounced when the H atom is far away from the surface. Despite of the large changes in the adsorption energies, the main character of the potential energy surface of the H atom on Si(111)(1×1) surface is retained. An opposite effect is found in the charge‐density‐transfer map of LSD results as compared to LDA results for the H atom approaching the surface through the H3 path, in which the H atom loses electrons rather than gains electrons from the surface. The fact that the H atom tends to lose electrons in the silicon bulk has already been reported by the experimental studies for the behavior of the H atom in the p‐type silicon. For the molecular hydrogen on Si(111)(1×1) surface, the effect of the spin polarization is so small that it can be neglected. © 2000 John Wiley & Sons, Inc. Int J Quant Chem 79: 47–55, 2000     

Density functional restricted-unrestricted approach for nonlinear properties: application to electron paramagnetic resonance parameters of square planar copper complexes

The density functional restricted-unrestricted approach for treatments of spin polarization effects in molecular properties using spin restricted Kohn-Sham theory has been extended from linear to nonlinear properties. It is shown that the spin polarization contribution to a nonlinear property has the form of a quadratic response function that includes the zero-order Kohn-Sham operator, in analogy to the lower order case where the spin polarization correction to an expectation value has the form of a linear response function. The developed approach is used to formulate new schemes for computation of electronic g-tensors and hyperfine coupling constants, which include spin polarization effects within the framework of spin restricted Kohn-Sham theory. The proposed computational schemes are in the present work employed to study the spin polarization effects on electron paramagnetic resonance spin Hamiltonian parameters of square planar copper complexes. The obtained results indicate that spin polarization gives rise to sizable contributions to the hyperfine coupling tensor of copper in all investigated complexes, while the electronic g-tensors of these complexes are only marginally affected by spin polarization and other factors, such as choice of exchange-correlation functional or molecular structures, will have more pronounced impact on the accuracy of the results.     

Plasmon single- and multi-quantum excitation in free metal clusters as seen by photoelectron spectroscopy

Plasmons are investigated in free nanoscale Na, Mg, and K metal clusters using synchrotron radiation-based x-ray photoelectron spectroscopy. The core levels for which the response from bulk and surface atoms can be resolved are probed over an extended binding energy range to include the plasmon loss features. In all species the features due to fundamental plasmons are identified, and in Na and K also those due to either the first order plasmon overtones or sequential plasmon excitation are observed. These features are discussed in view of earlier results for planar macroscopic samples and free clusters of the same materials.