Formation of direct metal-metal bonds from 16-electron "pseudo-aromatic" half-sandwich complexes Cp'M[E2C2(B10H10)

Continuous study on preparation of multimetallic clusters is stimulated by their rich coordination chemistry and promising applications in a variety of interesting fields. Although numerous efforts have been devoted to this field, the rational design of homo- and hetero-multimetallic compounds with direct metal-metal bonding supported by 1,2-dicarba-closo-dodecarborane-1,2-dichalcogenolates will still be an important step forward. This tutorial review focuses on the synthetic approach via redox reactions between the pseudo-aromatic half-sandwich oraganometallic carborane precursors and low-valent transition metal reagents. The tailoring of reaction conditions and the structural information from the resulting products are discussed extensively.     

Multinuclear self-assembly via half-sandwich complexes Cp*M[S2C2(B10H10)] and pyridine-based ligands

The study on transition metal mediated self-assemblies has drawn considerable attention during the past decade. This article focused on the significant progress made in the area of multinuclear supramolecular construction through pseudo-aromatic carboranyl species Cp*M[S(2)C(2)(B(10)H(10))] (M = Co, Rh, Ir) and pyridine-based ligands over the past few years. Structurally pre-defined complexes, from mono-molecules to three-dimensional frameworks, can be obtained in high yields under mild reaction conditions through self-assembly, and the structural features of solid state confirmed by X-ray crystallography are also discussed.     

Synthesis and reactions of group 6 metal half-sandwich complexes of 2,2-dicyanoethylene-1,1-dichalcogenolates [(Cp*)M[E(2)C=C(CN)(2)](2)]-(M = Mo,W; E = S,Se)

A series of group 6 transition metal half-sandwich complexes with 1,1-dichalcogenide ligands have been prepared by the reactions of Cp*MCl(4)(Cp* = eta(5)-C(5)Me(5); M = Mo, W) with the potassium salt of 2,2-dicyanoethylene-1,1-dithiolate, (KS)(2)C=C(CN)(2) (K(2)-i-mnt), or the analogous seleno compound, (KSe)(2)C=C(CN)(2) (K(2)-i-mns). The reaction of Cp*MCl(4) with (KS)(2)C=C(CN)(2) in a 1:3 molar ratio in CH(3)CN gave rise to K[Cp*M(S(2)C=C(CN)(2))(2)] (M = Mo, 1a, 74%; M = W, 2a, 46%). Under the same conditions, the reaction of Cp*MoCl(4) with 3 equiv of (KSe)(2)C=C(CN)(2) afforded K[Cp*Mo(Se(2)C=C(CN)(2))(2)] (3a) and K[Cp*Mo(Se(2)C=C(CN)(2))(Se(Se(2))C=C(CN)(2))] (4) in respective yields of 45% and 25%. Cation exchange reactions of 1a, 2a, and 3a with Et(4)NBr resulted in isolation of (Et(4)N)[Cp*Mo(S(2)C=C(CN)(2))(2)] (1b), (Et(4)N)[Cp*W(S(2)C=C(CN)(2))(2)] (2b), and (Et(4)N)[Cp*Mo(Se(2)C=C(CN)(2))(2)] (3b), respectively. Complex 4 crystallized with one THF and one CH(3)CN molecule as a three-dimensional network structure. Inspection of the reaction of Cp*WCl(4) with (KSe)(2)C=C(CN)(2) by ESI-MS revealed the existence of three species in CH(3)CN, [Cp*W(Se(2)C=C(CN)(2))(2)]-, [Cp*W(Se(2)C=C(CN)(2))(Se(Se(2))C=C(CN)(2))]-, and [Cp*W(Se(Se(2))C=C(CN)(2))(2)]-, of which [Cp*W(Se(2)C=C(CN)(2))(Se(Se(2))C=C(CN)(2))]-(5) was isolated as the main product. Treatment of 2a with 1/4 equiv of S(8) in refluxing THF resulted in sulfur insertion and gave rise to K[Cp*W(S(2)C=C(CN)(2))(S(S(2))C=C(CN)(2))](6), which crystallized with two THF molecules forming a three-dimensional network structure. 6 can also be prepared by refluxing 2a with 1/4 equiv of S(8) in THF. 3a readily added one Se atom upon treatment with 1 mol of Se powder in THF to give 4 in high yield, while the treatment of 3a or 4 with 2 equiv of Na(2)Se in THF led to formation of a dinuclear complex [(Cp*Mo)(2)(mu-Se)(mu-Se(Se(3))C=C(CN)(2))] (7). The structure of 7 consists of two Cp*Mo units bridged by a Se(2-) and a [Se(Se(3))C=C(CN)(2)](2-) ligand in which the triselenido group is arranged in a nearly linear way (163 degrees). The reaction of 2a with 2 equiv of CuBr in CH(3)CN yielded a trinuclear complex [Cp*WCu(2)(mu-Br)(mu(3)-S(2)C=C(CN)(2))(2)] (8), which crystallized with one CH(3)CN and generated a one-dimensional chain polymer through bonding of Cu to the N of the cyano groups.     

Synthesis and characterization of titanium tetraisocyanide complexes, [CpTi(CNXyl)4E], E = I,SnPh3, and SnMe3

Oxidation of [CpTi(CO)₄]^? by I₂, Ph₃SnCl, and Me₃SnCl in the presence of four equivalents of CNXyl, Xyl = 2,6-dimethylphenyl, affords unprecedented titanium tetraisocyanide complexes, [CpTi(CNXyl)₄E], E = I, SnPh₃, SnMe₃. These have been isolated and characterized by spectroscopic methods as well as single-crystal X-ray crystallography. A by-product of the iodine reaction was the Ti(III) complex, [CpTi(CNXyl)₂I₂], which was also characterized by X-ray crystallography.     

Synthesis and Structures of [Mo12E16(PEt3)10] (E = S,Se)

Dodecanuclcar cluster complexes [Mo₁₂S₁₆(PEt₃)₁₀] 1 and [Mo₁₂Se₁₆(PEt₃)₁₀] 2 have been prepared by the reactions of [Mo₆S₈(PEt₃)₆] with sulfur or [Mo₆Se₈(PEt₃)₆] with Cp₂TiSe₅, respectively, in toluene at refluxing temperature. The structures have been determined at 173 K by X-ray crystallography. The compound 1 ·3CHCl₃ crystallizes in the triclinic space group $ {\rm P}\bar 1 $, with a = 14.859(5) Å, b = 15.868(4) Å, c = 14.200(7) Å, α = 100.58(3)°, β = 117.58(3)°, γ = 79.53(2)°, V = 2899(1) ų, and Z = 1. Full-matrix least-squares refinement using 9016 observed reflections (I_o > 2σ(I_o)) gave R = 0.056, and R_w = 0.045. The data for 2 ·2CHCl₃ are: triclinic, $ {\rm P}\bar 1 $, a = 15.737(4) Å, b = 18.763(9) Å, c = 13.062(4) Å, α = 102.45(3)°, β = 128.54(2)°, γ = 69.49(3)°, V = 2825 ų, Z = 1, R = 0.096, and R_w = 0.120 for 5922 reflections (I_o > 2σ(I_o)). The cluster complexes 1 and 2 have two octahedral molybdenum cluster units linked by the rhomboidal intercluster Mo₂(μ₄-E)₂ bonding. The intercluster Mo—Mo distances in 1 are 3.419 Å and 2 3.551 Å. The cyclic voltammetry of 1 and 2 shows two oxidation and two reduction steps separated as large as 380–490 mV. The UV-Vis spectra of the dodecanuclear cluster complexes 1 and 2 have an extra weak band at around 744 nm which is absent in the starting octahedral cluster complexes.     

Olefin epoxidation catalyzed by [Ru(TDL)(tmeda)H2O] complexes (TDL = tridentate Schiff-base ligand; tmeda = tetramethylethylenediamine)

Mixed-chelate complexes of ruthenium have been synthesized using tridentate Schiff-base ligands (TDLs) derived from condensation of 2-aminophenol or 2-aminobenzoic acid with aldehydes (salicyldehyde, 2-pyridinecarboxaldehyde), and tmeda (tetramethylethylenediamine). [Ru^III(hpsd)(tmeda)(H₂O)]⁺ (1), [Ru^III(hppc)(tmeda)(H₂O)]²⁺ (2), [Ru^III(cpsd)(tmeda)(H₂O)]⁺ (3) and [Ru^III(cppc)(tmeda)(H₂O)]²⁺ (4) complexes (where hpsd²⁻ = N-(hydroxyphenyl)salicylaldiminato); hppc⁻ = N-(2-hydroxyphenylpyridine-2-carboxaldiminato); cpsd²⁻ = (N-(2-carboxyphenyl)salicylaldiminato); cppc⁻ = N-2-carboxyphenylpyridine-2-carboxaldiminato) were characterized by microanalysis, spectral (IR and UV–vis), conductance, magnetic moment and electrochemical studies. Complexes 1–4 catalyzed the epoxidation of cyclohexene, styrene, 4-chlorostyrene, 4-methylstyrene, 4-methoxystyrene, 4-nitrostyrene, cis- and trans-stilbenes effectively at ambient temperature using tert-butylhydroperoxide (t-BuOOH) as terminal oxidant. On the basis of Hammett correlation (log k_rel vs. σ⁺) and product analysis, a mechanism involving intermediacy of a [Ru–O–OBu^t] radicaloid species is proposed for the catalytic epoxidation process.     

Synthesis, DNA-binding and photocleavage studies of [Ru(phen)2(pbtp)] and [Ru(bpy)2(pbtp)] (phen = 1,10-phenanthroline; bpy = 2,2′-bipyridine; pbtp = 4,5,9,11,14-pentaaza-benzo[b]triphenylene)

Based on the ligand dppz (dppz = dipyrido-[3,2-a:2′,3′-c]phenazine), a new ligand pbtp (pbtp = 4,5,9,11,14-pentaaza-benzo[b]triphenylene) and its polypyridyl ruthenium(II) complexes [Ru(phen)₂(pbtp)]²⁺ (1) (phen = 1,10-phenanthroline and [Ru(bpy)₂(pbtp)]²⁺ (2) (bpy = 2,2′-bipyridine) have been synthesized and characterized by elemental analysis, ES-MS and ¹H NMR spectroscopy. The DNA-binding of these complexes were investigated by spectroscopic methods and viscosity measurements. The experimental results indicate that both complexes 1 and 2 bind to CT-DNA in classical intercalation mode, and can enantioselectively interact with CT-DNA. It is interesting to note that the pbtp ruthenium(II) complexes, in contrast to the analogous dppz complexes, do not show fluorescent behavior when intercalated into DNA. When irradiated at 365 nm, both complexes promote the photocleavage of pBR 322 DNA.     

Synthesis and Structure of Iron Complex with 1,2—Dithiolate—1,2—dicarba—closo—dodecaborane [Li（THF）4][Fe（S2C2B10H10）2（THF）]

1 INTRODUCTION The complexes containing dithiolate ligands have played a well-established role in modern coordination chemistry[1]. There is continuous interest in complexes of chalcogenolate ligands with transition metals such as complexes of Pd[1], Mo[1], Au[2], Ir[3～6], Rh[4, 5], Co[7] and Re[1, 8] containing a chelating 1,2-dicarba-closo-dodecabarane-1,2-dich- alcogenolate ligand. Some of these complexes have become important in the study of new molecular materials[1, 9, 10]. Th…     

Synthesis and characterisation of [RuCl2(PPh3)2(C16H11NO)] complex

The reaction of [RuCl₂(PPh₃)₃] complex with 1-isoquinolyl phenyl ketone has been examined. A new ruthenium(II) complexes–[RuCl₂(PPh₃)₂(C₁₆H₁₁NO)] has been obtained and characterised by IR and UV-VIS measurements. Crystal structure of the complex has been determined. The electronic spectrum of the complex has been calculated by TDDFT method.     

Reactions of carbonyl clusters with heterobidentate ligands. Synthesis and structural characterization of H4Ru4(CO)10[k2(P,S)-Ph2P(2-CH3SC6H4)] and Rh6(CO)14[k2(P,S)-Ph2P(2-CH3SC6H4)] clusters

Two new disubstituted derivatives of the clusters Rh₆(CO)₁₆ and H₄Ru₄(CO)₁₂ with the heterobidentate ligand [Ph₂P(2-CH₃SC₆H₄)] were synthesized. Structures of these compounds were completely characterized both in solid phase and solution. The H₄Ru₄(CO)₁₀[k²(P,S)-Ph₂P(2-CH₃SC₆H₄)] cluster is an example of a structure, in which a chelating coordination of a heterobidentate ligand results in the occurrence of a center of asymmetry associated with the substituted metal atom. This type of polynuclear complexes is of interest for obtaining essentially new catalysts for asymmetric synthesis on the basis of cluster compounds.     

Synthesis, structural characterization, reactivity, and thermal stability of [eta(5):sigma-Me2C(C5H4)(C2B10H10)]Ti(R)(NMe2)

Reaction of [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]TiCl(NMe2) (1) with 1 equiv of PhCH2K, MeMgBr, or Me3SiCH2Li gave corresponding organotitanium alkyl complexes [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(R)(NMe2) (R = CH2Ph (2), CH2SiMe3 (4), or Me (5)) in good yields. Treatment of 1 with 1 equiv of n-BuLi afforded the decomposition product {[eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti}2(mu-NMe)(mu:sigma-CH2NMe) (3). Complex 5 slowly decomposed to generate a mixed-valence dinuclear species {[eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti}2(mu-NMe2)(mu:sigma-CH2NMe) (6). Complex 1 reacted with 1 equiv of PhNCO or 2,6-Me2C6H3NC to afford the corresponding monoinsertion product [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(Cl)[eta(2)-OC(NMe2)NPh] (7) or [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(Cl)[eta(2)-C(NMe2)=N(2,6-Me2C6H3)] (8). Reaction of 4 or 5 with 1 equiv of R'NC gave the titanium eta(2)-iminoacyl complexes [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(NMe2)[eta(2)-C(R)=N(R')] (R = CH2SiMe3, R' = 2,6-Me2C6H3 (9) or tBu (10); R = Me, R' = 2,6-Me2C6H3 (11) or tBu (12)). The results indicated that the unsaturated molecules inserted into the Ti-N bond only in the absence of the Ti-C(alkyl) bond and that the Ti-C(cage) bond remained intact. All complexes were fully characterized by various spectroscopic techniques and elemental analyses. Molecular structures of 2, 3, 6-8, and 10-12 were further confirmed by single-crystal X-ray analyses.     

Metal complexes of tetradentate and pentadentate N-o-hydroxybenzamido-meso-tetraphenylporphyrin ligand: M(N-NCO(o-OH)C6H4-tpp) (M = Zn2+, Ni2+, Cu2+) and M′(N-NCO(o-O) C6H4-tpp) (M′ = Mn3+) (tpp = 5, 10, 15, 20-tetraphenylporphyrinate)

The crystal structures of N-o-hydroxybenzimido-meso-tetraphenylporphyrinatozinc(II) toluene solvate [Zn(N-NCO(o-OH)C₆H₄-tpp)·C₆H₅CH₃; 4·C₆H₅CH₃], N-o-hydroxybenzimido-meso-tetraphenylporphyrinatonickel(II) chloroform solvate [Ni(N-NCO(o-OH)C₆H₄-tpp)·0.6CHCl₃; 5·0.6 CHCl₃], N-o-hydroxybenzimido-meso-tetraphenylporphyrinatocopper(II) toluene solvate [Cu(N-NCO(o-OH)C₆H₄-tpp)·C₆H₅CH₃; 6·C₆H₅CH₃] and N-o-oxido-benzimido-meso-tetraphenylporphyrinato(-κ⁴,N¹,N²,N³,N⁵,κO²) manganese (III) methylene chloride·methanol solvate [Mn(N-NCO(o-O)C₆H₄-tpp)·CH₂Cl₂·MeOH; 8·CH₂Cl₂·MeOH] were established. The coordination sphere around Zn²⁺ ion in 4·C₆H₅CH₃, (or Ni²⁺ ion in 5·0.6 CHCl₃ or Cu²⁺ ion in 6·C₆H₅CH₃) is a distorted square planar (DSP) whereas for Mn³⁺ in 8·CH₂Cl₂·MeOH, it is a distorted trigonal bipyramid (DTBP) with O(1), N(1) and N(3) lying in the equatorial plane for 8·CH₂Cl₂·MeOH. The g value of 8.27 measured from the parallel polarization of X-band EPR spectra at 293 K is consistent with the high-spin mononuclear manganese(III) (S = 2) in 8. The magnitude of axial (D) zero-field splitting (ZFS) for the mononuclear Mn(III) in 8 was determined approximately as 3.0 cm^?1 by the paramagnetic susceptibility measurements and conventional EPR spectroscopy.     

Synthesis and spectroscopic DNA binding studies of [Ru(phen)2(tbtc)]2+ and [Ru(2,9-dmp)2(tbtc)]2+

A new polypyridyl ligand tbtc (tbtc=4,5,9,14-tetraaza-benzo[b]triphenylene-11-carboxylic acid methyl ester) and its complexes [Ru(phen)2(tbtc)]2+ (1) (phen=1,10-phenanthroline) and [Ru(2,9-dmp)2(tbtc)]2+ (2) (2,9-dmp=2,9-dimethyl-1,10-phenanthroline) were synthesized and characterized by element analysis, MS, and 1H NMR. The DNA binding properties of both complexes to calf thymus DNA (CT-DNA) were investigated by different spectrophotometric methods and viscosity measurements. The results suggest that both complexes bind to DNA via an intercalative mode, and the DNA binding affinity of complex 1 is much greater than that of complex 2. This difference in binding affinity probably was caused by the different ancillary ligands. Also, when irradiated at 365 nm, complex 1 was found to be a more-effective DNA-cleaving agent than complex 2.     

二维层状硫代二丙酸桥联锌配位聚合物{[Zn(C_6H_8O_4S)(C_(10)H_8N_2)]·(H_2O)_2}_n的合成、结构与性质研究

合成了1个新的二维层状配位聚合物{[Zn(C6H8O4S)(C10H8N2)]·(H2O)2}n(C6H8O4S-=3,3’-硫代二丙酸根,C10H8N2=4,4-联吡啶),并对其进行了元素分析、红外光谱表征、TG分析和单晶X射线的表征.结果表明:该配位聚合物属单斜晶系,P2/n空间群,晶胞参数a=1.055 9(2)nm,b=0.556 98(11)nm,c=1.550 0(3)nm,β=94.82(3)°,Z=2,F(000)=448,最终R=0.062 8,wR=0.134 7.在配位聚合物分子中,锌离子与2个不同的3,3’-硫代二丙酸根中的2个羧酸O原子及2个不同的4,4’-联吡啶分子中的2个N原子配位,形成了扭曲的四面体结构.每个硫代二丙酸根桥联2个锌原子形成一维链状结构.链与链之间进一步通过4,4’-联吡啶分子连接,形成了一个二维层状结构.分子间氢键作用的结果使配合物具有三维网络结构.