Electrochemical determination of lead using bismuth modified glassy carbon electrode

Electrochemical application of bismuth film modified glassy carbon electrode was studied with the objective of lead detection. Bismuth film on glassy carbon substrate was formed in a plating solution of 2 mmol/L Bi(NO₃)₃, in 1 mol/L HCl at ?1.1 V (vs. Ag/AgCl) for 300 s. Lead was detected by differential pulse anodic voltammetry in acetate buffer of pH 5.0 in the concentration range of 7.5 nmol/L to 12.5 μmol/L. Factors influencing the anodic stripping performance, including deposition time, solution pH, Bi(III) concentration, potential, pulse amplitude, pulse width, have been optimized. Three linear calibration plots in the range 7.5 nmol/L to 0.1 μmol/L, 0.25 to 1 μmol/L, 2.5 to 12.5 μmol/L with regression coefficients of 0.991, 0.986 and 0.978 respectively were obtained. The theoretical detection limit equivalent to three times standard deviation for 7.5 nmol/L lead (n = 5) was calculated to be 5.25 nmol/L utilizing a 5 min deposition time and sensitivity 83.97 A L/mol. The sensitivity and detection limit of the method was compared with reported voltammetric methods for detection of lead and the result obtained was found to be promising for determination of lead.     

Ethylbenzene solubility,diffusivity, and permeability in poly(dimethylsiloxane)

The pure‐gas sorption, diffusion, and permeation properties of ethylbenzene in poly(dimethylsiloxane) (PDMS) are reported at 35, 45, and 55 °C and at pressures ranging from 0 to 4.4 cmHg. Additionally, mixed‐gas ethylbenzene/N₂ permeability properties at 35 °C, a total feed pressure of 10 atm, and a permeate pressure of 1 atm are reported. Ethylbenzene solubility increases with increasing penetrant relative pressure and can be described by the Flory–Rehner model with an interaction parameter of 0.24 ± 0.02. At a fixed relative pressure, ethylbenzene solubility decreases with increasing temperature, and the enthalpy of sorption is −41.4 ± 0.3 kJ/mol, which is independent of ethylbenzene concentration and essentially equal to the enthalpy of condensation of pure ethylbenzene. Ethylbenzene diffusion coefficients decrease with increasing concentration at 35 °C. The activation energy of ethylbenzene diffusion in PDMS at infinite dilution is 49 ± 6 kJ/mol. The ethylbenzene activation energies of permeation decrease from near 0 to −34 ± 7 kJ/mol as concentration increases, whereas the activation energy of permeation for pure N₂ is 8 ± 2 kJ/mol. At 35 °C, ethylbenzene and N₂ permeability coefficients determined from pure‐gas permeation experiments are similar to those obtained from mixed‐gas permeation experiments, and ethylbenzene/N₂ selectivity values as high as 800 were observed. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1461–1473, 2000     

Photochemical determination of the solubility of oxygen in various media

A photochemical method for determining the oxygen concentration in air-saturated non-aqueous solvents has been developed. Solutions containing a sensitizer (Rose Bengal or Methylene Blue) and 1,3-diphenylisobenzofuran (DPIBF) as an oxygen acceptor are irradiated at 546 or 633 nm and the absorbance at 404 nm is monitored. The dissolved oxygen content is found from the change in absorbance and the known 1:1 stoichiometry of addition of singlet oxygen to DPIBF. The solubilities found, accurate to +/- 6%, for oxygen in air-equilibrated solvents, are (mM): acetone, 2.37; acetonitrile, 2.42; dimethylsulfoxide, 0.33; ethanol, 1.94; N-methylformamide, 1.31. Measurements on mixed acetone-N-methylformamide solvents showed that the solubility of oxygen does not vary with solvent composition in a predictable manner.     

Application of mass spectrometer-inverse gas chromatography to study polymer-solvent diffusivity and solubility

The application of a mass spectrometer detector in capillary column inverse gas chromatography is shown to be a valuable tool in the measurement of diffusion and solubility in polymer-solvent systems. The component specific detector provides excellent results for binary polymer-solvent systems, but it is particularly valuable because it can be readily applied to multicomponent systems. Results for a number of infinitely dilute solvents in poly(vinyl acetate) (PVAc) are reported over a range of temperature from 60 to 150 degrees C. Results are also reported for finite concentrations of toluene and methanol in PVAc from 60 to 110 degrees C. Finally, the technique was applied to study the effect of finite concentrations of toluene on the diffusion coefficients of THF and cyclohexane in PVAc. The experimental data compare well with literature values for both infinite and finite concentrations, indicating that the experimental protocol described in this work is sound.     

Electrochemical behavior and determination of L-tryptophan on carbon ionic liquid electrode

A carbon ionic liquid electrode (CILE) was fabricated by mixing N-butylpyridinium hexafluoro-phosphate (BPPF ₆ ) with graphite powder and further used for the investigation on the electrochemical behavior of L-tryptophan (Trp). The fabricated CILE showed good conductivity, inherent electrocatalytic ability and strong promotion to the electron transfer of Trp. On the CILE, an irreversible oxidation peak appeared at 0.948 V (vs. saturated calomel reference electrode). For 5.0 × 10⁻⁵ M Trp the oxidation peak current increased about 5 times and the oxidation peak potential decreased on 0.092 V compared to carbon paste electrode. The results indicated that an electrocatalytic reaction occurred on CILE. The conditions for the electrochemical detection were optimized and the electrochemical parameters of Trp on CILE were carefully investigated. Under the selected conditions, the oxidation peak current showed linear relationship with Trp concentration in the range of 8.0 × 10⁻⁶ ∼1.0 × 10⁻³ M for cyclic voltammetry and the detection limit was estimated as 4.8 × 10⁻⁶ M (3σ). The interferences of other amino acids or metal ions on the determination were tested and the proposed method was successfully applied to the synthetic sample analysis.     

Effect of vanadium on oxygen diffusivity in niobium

The effect on the diffusivity of oxygen of vanadium additions to niobium was investigated by a diffusion couple technique. The addition of vanadium to niobium results in an increase of the activation energy for oxygen diffusion from 107 kJ mol⁻¹ for oxygen in niobium to 176 ± 9 kJ mol⁻¹ for the Nb-0.5at.%V alloy and to 194 ± 9 kJ mol⁻¹ for the Nb-10at.%V alloy. This increase in the activation energy is attributed to the trapping of oxygen by vanadium atoms. Applying Kirchheim's trapping model and the results of internal friction measurements, trapping energies of about −64 and −49 kJ mol⁻¹ were obtained for the Nb-0.5at.%V and the Nb-10at.%V alloys respectively.     

Potentiometric studies on bismuth ferrocyanide and the determination of bismuth

Summary The reaction between bismuth nitrate and ferrocyanides of alkali metals such as sodium, potassium, lithium and ammonium, has been studied potentiometrically using platinum as an indicator electrode in conjunction with a saturated calomel electrode through KNO₃ bridge. The equivalence point obtained from the maximum value of dE/dV corresponds to the formation and complete precipitation of a compound having molecular formula BiMFe(CN)₆, where M represents an alkali metal. The potentiometric curves are symmetrical on both sides of the end point and the results obtained are very accurate and reproducible. The method of potentiometric titrations, though simple, offers a rapid and accurate means for the determination of bismuth solutions at fairly low concentrations. The effect of addition of ethanol and electrolytes on the course of the reaction has been studied.     

Gas permeability,diffusivity, and solubility of poly(4-vinylpyridine) film

Although poly(4-vinylpyridine) is believed to have good gas permselectivity, the intrinsic gas permeation property is rarely reported in the literature. The objective of this work is to study the the intrinsic gas permeation property of poly(4-vinylpyridine) using a free-standing film. Because of its brittleness and strong adhesion with most solid surfaces, a free-standing poly(4-vinylpyridine) film was therefore prepared from casting on a liquid mercury surface. The permeation behavior of He, H₂, O₂, N₂, CH₄, and CO₂ through the film was tested over a pressure range of 252 to 800 cm Hg at 35°C. The permeability and solubility decrease slightly with an increase in pressure, whereas the diffusivity increases as pressure increases. The pressure-dependent phenomenon can be explained using the partial immobilization model and the dual sorption model. An effective gas molecule diameter, which is defined as the square root of the product of gas collision and kinetic diameters, was used to correlate the diffusivity and gas molecule size, and an empirical equation was derived. Solubility is also a strong function of gas physical properties such as critical temperature and Lennard–Jones force constant, which are the measures of gas condensability and molecule interaction, respectively. In general, higher solubility in a polymer is obtained for gases with greater condensability and stronger interaction. Typical gas permeabilities of poly(4-vinylpyridine) measured at 619 cm Hg and 35°C are: 12.36 (He), 12.64 (H₂), 3.31 (CO₂), 0.84 (O₂), 0.14 (CH₄), and 0.13 (N₂) barrers. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2851–2861, 1999     

Electrochemical behaviors of guanosine on carbon ionic liquid electrode and its determination

The electrochemical behaviors of guanosine on the ionic liquid of N-butylpyridinium hexafluorophosphate (BPPF₆) modified carbon paste electrode (CPE) was studied in this paper and further used for guanosine detection. Guanosine showed an adsorption irreversible oxidation process on the carbon ionic liquid electrode (CILE) with the oxidation peak potential located at 1.12 V (vs. SCE) in a pH 4.5 Britton-Robinson (B-R) buffer solution. Compared with that on the traditional carbon paste electrode, small shift of the oxidation peak potentials appeared but with a great increment of the oxidation peak current on the CILE, which was due to the presence of ionic liquid in the modified electrode adsorbed the guanosine on the surface and promoted the electrochemical response. The electrochemical parameters such as the electron transfer coefficient (α), the electron transfer number (n), and the electrode reaction standard rate constant (k_s) were calculated as 0.74, 1.9 and 1.26 × 10⁻⁴ s⁻¹, respectively. Under the optimal conditions the oxidation peak current showed a good linear relationship with the guanosine concentration in the range from 1.0 × 10⁻⁶ to 1.0 × 10⁻⁴ mol/L by cyclic voltammetry with the detection limit of 2.61 × 10⁻⁷ mol/L (3σ). The common coexisting substances showed no interferences to the guanosine oxidation. The CILE showed good ability to distinguish the electrochemical response of guanosine and guanine in the mixture solution. The urine samples were further detected by the proposed method with satisfactory results.     

Gas permeability,diffusivity, solubility,and aging characteristics of 6FDA-durene polyimide membranes

We have determined the intrinsic gas transport properties of He, H₂, O₂, N₂, CH₄, and CO₂ for a 6FDA-durene polyimide as a function of pressure, temperature and aging time. The permeability coefficients of O₂, N₂, CH₄, and CO₂ decrease slightly with increasing pressure. The pressure-dependent diffusion coefficients and solubility coefficients are consistent with the dual-sorption model and partial immobilization. All the gas permeabilities increase with temperature and their apparent activation energies for permeation increase with increasing gas molecular sizes in the order of CO₂, O₂, N₂, and CH₄.The percentages of permeability decay after 280 days of aging are 22, 32, 36, 40, 42, and 30% for He, H₂, O₂, N₂, CH₄, and CO₂, respectively. Interestingly, except for H₂ (kinetic diameter of 2.89 Å), the percentages of permeability decay increase exactly in the order of He (kinetic diameter of 2.6 Å), CO₂ (3.30 Å), O₂ (3.46 Å), N₂ (3.64 Å), and CH₄ (3.80 Å). The apparent activation energies of permeation for O₂, N₂, CH₄, and CO₂ increase with aging because of the increases in activation energies of diffusion and the decreases in solubility coefficients. The activation-energy increase for diffusion is probably due to the decrease in polymeric molar volume because of densification during aging. The reduction in solubility coefficient indicates the available sites for sorption decreasing with aging because of the reduction of microvoids and interstitial chain space.     

离子液体修饰电极上氧氟沙星的电化学行为及测定

制备了1-丁基-3-甲基咪唑六氟磷酸盐(BM IMPF6)室温离子液体修饰电极,用循环伏安法研究氧氟沙星在该修饰电极上的电化学行为,结果表明该电极过程受吸附控制。计算了电极过程的部分动力学参数:转移电子数n=2,电极有效面积A=0.0502 cm2。用方波溶出伏安法优化了测定参数,测定了浓度与峰电流ipa的线性关系,发现ipa与氧氟沙星浓度在5.0×10-7～6.0×10-5mol/L范围内呈线性关系,检出限为2.8×10-7mol/L,样品回收率为93.2%～108.2%,可直接用于实际样品中氧氟沙星含量的测定。     

Electrochemical behaviour of EOP at the liquid/liquid interface and its determination

A new approach to the determination of emulsifier OP (EOP, a nonionic surfactant) is proposed, based on the voltammetry of the EOP facilitating Ca(2+) transfer across the water/nitrobenzene (w/nb) interface. The peaks obtained with cyclic voltammetry at the w/nb interface correspond to the transfer of the coordination complex ion [Ca(EOP)](2+) from the aqueous to the nonaqueous phase. The calibration graph is linear in the range of 1.5x10(-5)-5x10(-4) mol l(-1). The ionic surfactants have a very minor effect on detection.     

Electrochemical study and polarographic determination of ranitidine

In the polarographic reduction of ranitidine, an H₂-antagonist of histamine, three waves are observed; their half-wave potentials and limiting currents depend strongly on the pH of the solution. The first and second waves are due to reduction of teh protonated, CHNO₂H⁺, and unprotonated, CHNO₂, nitroethene group of ranitidine, respectively; the origin of the third wave is unknown. The characteristics of the second and third waves are studied in acetic acid/acetate buffer at pH 5.5; the first wave does not appear at this pH. The second wave (E_{$\text{1}\text{2}$} = ?0.90 V, vs. Ag/AgCl) is useful for determining ranitidine in the range 2.4–4.9 × 10^?4 M by direct current polarography and in the range 2.5 × 10^?7?2.05 × 10^?5 M by differential pulse polarography.     

Electrochemical biosensors for determination of nystatin activity

Nystatin is determined by recording the current of an oxygen-based biosensor or the potential of carbon dioxide-based biosensor. The yeast strain Saccharomyces cerevisiae is immobilized on an acetylcellulose filter and fixed to the surface of the electrochemical sensor. Both biosensors monitor the death of the strain the additiin of the antigungal solution and a measurable change of the curent (or potential), and the slope of the recording at the midpoint of the sigmoidal curve can be related to the nystatin activity. The carbondioxide-based biosensor provides a larger response range (100–500 U ml⁻¹ nystatin) but the oxgen-based sensor is more sensitive (25–100 U ml⁻¹ nystatin). All analyses are done at pH 4.5 where the response times of the electrochemical sensors are similar.     

Determination of oxygen activity in gallium-antimony liquid solutions

The activity of oxygen occuring at low concentrations in liquid Ga-Sb solutions was studied by means of the galvanic cell with zirconia solid electrolyte: W,O in Ga-Sb | ZrO₂ + CaO | air, Pt. The coulometric titration technique was employed. The activity coefficient of oxygen was determined over the whole composition range as a function of temperature in the interval 1 123 K – 1 223 K. From the experimental resultsWagner's parameterh was deduced as:h _GaSb=7 730J/g atom O. Values of oxygen activity coefficients in ternary gallium-indium-antimony alloys were predicted.Dedicated to Prof. Dr.Kurt L. Komarek on the occasion of his 60th birthday.     

对乙酰氨基酚在碳纳米管-离子液体糊修饰电极上的电化学行为及分析应用

制备了碳纳米管-离子液体糊修饰电极并用电化学方法对其进行了表征,研究对乙酰氨基酚在碳纳米管-离子液体糊修饰电极上的电化学行为,建立了以碳纳米管-离子液体糊修饰电极测定对乙酰氨基酚(APAP)的灵敏的电化学方法.在优化的实验条件下,对乙酰氨基酚的氧化峰电流与其浓度在1.0×10-7～1.0×10-6 mol/L和1.0×...     

Electrochemical and kinetic study of oxygen in a perfluorotributylamine emulsion

Oxygen can be determined in a perfluorotributylamine emulsion used as a blood substitute by coulometry and polarography. The oxygen uptake of the emulsion (4.3 × 10^?3 mol l^?1 or 11 ml-% at 25°C and P_O2 = 760 mm Hg) is about three times greater than that of water. The adsorption of surfactant on a dropping mercury electrode changes the electrochemical parameters E_{$\text{1}\text{2}$}, α and k₃. The marked difference between the diffusion coefficients of oxygen and hydrogen peroxide (ratio 2.6) seems to be proceed from the ejection of oxygen molecules from the perfluorotributylamine droplets and from the insolubility of hydrogen peroxide molecules in the droplets. The constant rate of oxygen release by these droplets was estimated to be 10⁴ s^?1 by a stopped-flow spectrophotometric method. This constant rate seems to be linked with the particle diameter (0.2 μm) and the diffusion coefficient in the perfluorotributylamine droplets (1.6 × 10^?6 cm² s^?1).     

Submicro determination of aluminium, bismuth and copper in organometallic compounds

Methods for the determination of aluminium, bismuth or copper m samples of organometallic compounds weighing 40-110 microg have been developed. Spectrophotometric determination following digestion with nitric and sulphuric acids in a sealed tube is recommended, all results obtained from the analysis of standard compounds being within +/- 0.3% absolute error. Digestion in an open tube with perchloric and sulphuric acids gives satisfactory results for bismuth compounds but erratic and often low results for aluminium and copper compounds.     

Electrochemical modeling of antioxidants action and determination of their activity

The method of pulse voltammetry was applied to the investigation of the antioxidant activity of sulfur-containing biologically active substances. Three models were considered to characterize the substances in aqueous medium: First, the interaction of antioxidants with a ferrous ion to characterize the preventive activity on the initiation stage of free radical oxidation, second and third describing the interaction of an antioxidant with electrochemically generated hydroxy radicals and hydrogen peroxide, to characterize the inhibitory activity in the initial stages of propagation and branching of the chain of free radical oxidation. A synergistic effect of ascorbic acid and other studied compounds at their combined action on hydroxy radicals and hydrogen peroxide was revealed.     

Electrochemical behavior and composition of bismuth sulfide coatings

Cyclic potentiodynamic voltammetry and X-ray photoelectron spectroscopy were used to study the electrochemical behavior and composition of bismuth sulfide coatings deposited by successive ionic layer adsorption and reaction on glassy carbon in a colloid solution of bismuth(III) compounds, with Na₂S as a sulfidizing agent.