激光主动探测中回波信号的小波去噪方法

在分析激光主动探测中回波信号的噪声特性和小波变换去噪原理的基础上，提出了一种基于最大信噪比准则的小渡阈值去噪方法。首先用最大信噪比准则对小波变换系数进行阈值选取，然后采用软阂值方法对小波系数进行量化处理后再重构。仿真结果表明最大信噪比准则小波去噪方法改善信噪比效果十分显著，检测下限达到-16．2dB。证明了该方法在激光主动探测系统回波信号检测中的有效性。     

Signal-to-noise ratio enhancement based on wavelet filtering in ultrasonic testing

In ultrasonic non-destructive testing of materials with a coarse-grained structure the scattering from the grains causes backscattering noise, which masks flaw echoes in the measured signal. Several filtering methods have been proposed for improving the signal-to-noise ratio. In this paper we present a comparative study of methods based on the wavelet transform. Experiments with stationary, discrete and wavelet packet de-noising are evaluated by means of signal-to-noise ratio enhancement. Measured and simulated ultrasonic signals are used to verify the proposed de-noising methods. For comparison, we use signal-to-noise ratio enhancement related to fault echo amplitudes and filtering efficiency specific for ultrasonic signals. The best results in our setup were achieved with the wavelet packet de-noising method.     

基于小波变换的紫外光信号降噪处理

介绍了小波变换的基本理论以及利用小波变换进行信号处理的方法和步骤.选择db8小波对紫外光信号进行小波阈值降噪处理.实验结果表明采用小波阈值降噪法能够有效地抑制信号中的噪声,信噪比提高了8.519 2 dB.     

倒谱参数稀疏分解下的汉语音谎言检测

为了提高汉语语音的谎言检测准确率,提出了一种对信号倒谱参数进行稀疏分解的方法。首先,采用小波包滤波器组对语音信号进行多频带划分,求得子频带对数能量并进行离散余弦变换以提取小波包频带倒谱系数,结合梅尔频率谱系数得到倒谱参数;其次,依据K-奇异值分解方法分别利用说谎和非说谎两种状态下的语音倒谱参数集训练得到过完备混合字典,在此字典上根据正交匹配追踪算法对参数集进行稀疏编码提取稀疏特征;最终进行多种分类模型下的识别实验·实验结果表明,稀疏分解方法相比传统参数降维方法具有更好的优化性能,本文推荐的稀疏谱特征最佳识别率达到78.34%,优于其他特征参数,显著提高了谎言检测识别准确率。      

Deceptive Chinese speech detection based on sparse decomposition of cepstral feature

In order to improve the performance of deception detection based on Chinese speech signals, a method of sparse decomposition on spectral feature is proposed. First, the wavelet packet transform is applied to divide the speech signal into multiple sub-bands. Band cepstral features of wavelet packets are obtained by operating the discrete cosine transform on loga?rithmic energy of each sub-band. The cepstral feature is generated by combing Mel Frequency Cepstral Coefficient and Wavelet Packet Band Cepstral Coefficient. Second, K-singular value decomposition algorithm is employed to achieve the training of an over-complete mixture dictionary based on both the truth and deceptive feature sets, and an orthogonal matching pursuit algorithm is used for sparse coding according to the mixture dictionary to get sparse feature.Finally, recognition experiments axe performed with various classified modules. Experimental results show that the sparse decomposition method has better performance comparied with con?ventional dimension reduced methods. The recognition accuracy of the method proposed in this paper is 78.34%, which is higher than methods using other features, improving the recognition ability of deception detection system significantly.     

基于主元分析与动态时间弯曲的故障诊断方法及应用研究

轴承是工程实际中常用而又极易损坏的部件,特别是对其早期微弱响应的辨识,具有重要的社会价值和意义。为提高运转轴承的安全可靠性和可维护性,提出了基于主元分析与动态时间弯曲距离的故障诊断方法,它可以准确对早期微弱动态响应辨识、诊断。该方法首先将典型故障样本信号与待测信号小波去噪并EMD分解,并对若干固有模态分量主元分析求取主元,然后对主元分量进行分析,获得相关特征值组成特征向量,计算待测信号与已知故障样本信号特征向量的弯曲距离,弯曲距离越小表明两信号越相似,从而辨识故障。此外,还可将其应用于转子、碰磨、齿轮故障诊断中,工程应用实例表明该方法可以准确故障分类,高效故障诊断。     

Wavelet based noise suppression technique and its application to ultrasonic flaw detection

The noise suppression techniques with wavelet transform (WT) are widely used in non-destructive testing and evaluation (NDT&E), especially in ultrasonics. Complete reconstruction theory with hard or soft thresholds, reconstruction technique based on the singularities of noise and signal, matched filter with an impulse response, and optimal frequency-to-bandwidth ratio of wavelet technique have all been used to analyze ultrasonic signals for noise suppression. But a more simple and effective technique has been pursued for decades. This paper develops a new technique using WT for the right purpose. In this work, WT is treated as a band-pass filter whose central frequency and frequency bandwidth (CF&FB) are determined by the spectra distribution of an ultrasonic signal captured from real testing situation. For the purpose of matching their CF&FB well, a technique for evaluating the optimal scale of a daughter wavelet is carried out too. By acting this daughter wavelet as a band-pass filter, we can obtain excellent de-noising results, even when the signal to noise ratio (SNR) is below -18 dB. The performance of the technique has been done by ultrasonic signals with computer generated white noises. Finally, the experimental verification is performed on a pipeline specimen with man-made small flaws with good results obtained. The results show that the technique is more suitable for processing heavy noised ultrasonic signals, and it can also be used in automatic flaw detection.     

结点阈值小波包变换图像去噪新算法

小波包变换是小波变换的推广,可视为普通小波函数的线性组合,具有灵活的时频分析能力,随着分解层数的增加,小波包分解能够在所有的频率范围聚焦。提出一种应用结点阈值小波包变换的新型图像去噪算法。利用小波包变换对含噪图像进行分解,在图像信号的子带层次上进行结点阈值操作,采用软阈值的方法进行阈值处理,结点噪声采用谱熵法估计,并使用峰值信噪比评估去噪后的图像质量。实验结果表明,相比于使用其它阈值方法的小波包图像去噪算法,该算法具有更好的图像去噪性能。     

Adaptive bistable stochastic resonance and its application in mechanical fault feature extraction

Stochastic resonance (SR) is an important approach to detect weak vibration signals from heavy background noise. In order to increase the calculation speed and improve the weak feature detection performance, a new bistable model has been built. With this model, an adaptive and fast SR method based on dyadic wavelet transform and least square system parameters solving is proposed in this paper. By adding the second-order differential item into the traditional bistable model, noise utilization can be increased and the quality of SR output signal can be improved. The iteration algorithm for implementing the adaptive SR is given. Compared with the traditional adaptive SR method, this algorithm does not need to set up the searching range and searching step size of the system parameters, but only requires a few iterations. The proposed method, discrete wavelet transform and the traditional adaptive SR method are applied to analyzing simulated vibration signals and extracting the fault feature of a rotor system. The contrastive results verify the superiority of the proposed method, and it can be effectively applied to weak mechanical fault feature extraction.     

基于中值滤波和提升小波分析的图像去噪方法研究

针对现有算法大多对单一高斯噪声或脉冲噪声进行图像滤波的问题,在对二维图像平滑去噪的过程中,采用基于中值滤波和提升小波变换相结合的图像去噪方法。在中值滤波基础上,构造基于脉冲检测的中值滤波器,找出混合噪声中脉冲噪声并进行滤波;与此同时,对原始小波进行提升,构造提升小波,然后采用提升小波阈值去噪方法抑制高斯噪声。实验结果表明:采用本文方法,混合噪声得到有效抑制,去噪效果好。     

基于小波变换的分水岭图像分割方法

图像分割技术在数字图像处理中占有重要地位.提出了一种基于小波变换的图像分割方法,有效地将小波分析、小波包分解与数学形态学中的分水岭方法相结合.首先,通过小波包对图像有效降噪,在一定程度上减少了分水岭方法的过分割现象.然后利用小波变换得到的梯度向量进行分水岭变换,有效保持边缘信息.实验结果证明该算法是可行的,与基于形态梯度的分割结果相比,得到了较好的分割效果.     

一种多算法融合的实时滤波在光纤陀螺中的应用

根据光纤陀螺输出信号的特点和应用环境的要求,在Mallat小波变换的基础上,研究了一种多算法融合的实时滤波算法.该算法在光纤陀螺刚启动,数据量偏少时,通过IIR滤波器进行滤波|采样数据量足够多时,通过施加滑动数据窗来实现小波实时去噪,采用周期对称延拓的方法去除小波去噪的边界问题,可有效去除光纤陀螺输出信号中高频部分的噪音,提高滤波效果,抑制陀螺的随机漂移.通过实验验证了该方法对陀螺输出信号进行滤波的可行性和有效性.     

EEMD自适应去噪在拉曼光谱中的应用

二代小波是公认较好的降噪手段,但是降噪效果依赖于基函数、分解层数和阈值等参数设置。经验模态分解(empirical mode decomposition, EMD)无需参数设定,按照频率特性将信号分解成本征模函数(intrinsic mode function, IMF),对IMF滤波,实现了信号自适应去噪。拉曼光谱中信号和噪声交叠集中在极高频段,EMD产生模态混叠问题,影响去噪效果。应用总体平均经验模态分解(ensemble empirical mode decomposition,EEMD)拉曼光谱克服了模态混叠,有效区分出高频信号和噪声,获得了与小波函数相似去噪效果。文中首先对一段非线性非平稳豆油脂拉曼光谱EMD分解,可见模态混叠,EEMD分解出清晰模态的特征分量。然后分别用快速傅里叶变换(fast Fourier transform,FFT)、小波变换(Wavelet)、EMD和EEMD处理含噪光谱,信噪比、均方根误差、相关系数三个方面指标表明FFT高频去噪效果最差,其次是EMD,恰当的Wavelet同EEMD效果相当,EEMD的优势是降噪过程的自适应。最后提出光谱时频分析方法和IMF噪声属性判别准则研究趋势。     

混沌干扰中基于同步挤压小波变换的谐波信号提取方法

针对混沌干扰背景下多个谐波信号的提取问题, 提出了一种基于同步挤压小波变换(SST)的谐波信号抽取方法. 首先利用SST将混沌信号和谐波信号组成的混合信号分解为不同的内蕴模态类函数, 然后利用Hilbert变换对分离出的内蕴模态类函数进行频率识别, 从中分离出各谐波信号. 以Duffing混沌背景为例, 对混沌干扰下多谐波信号的提取进行了实验分析. 实验结果表明: 对于不同频率间隔的多个谐波分量, 本文方法的提取结果都具有较高的精度, 而且所提方法对高斯白噪声的干扰具有较好的鲁棒性, 综合提取效果优于经典的经验模态分解方法.     

变分模态分量降噪后重构的水声弱信号检测

针对能量检测法在低信噪比下对非合作水声探测信号的检测性能显著下降的问题,提出了一种组合变分模态分解和小波变换降噪重构的信号检测方法。以信号分解出的各个本征模态函数的近似熵与互相关系数比值作为分量分类参数,将所得分量分为信号分量、含噪信号分量与噪声分量,然后利用第二代小波变换对含噪信号分量降噪后与信号分量组成重构信号,最后对重构信号进行检测。数值仿真结果表明该方法可以在无先验信息的情况下对CW和LFM信号自适应降噪,信噪比0 dB以下时CW信号重构后信噪比提升约12 dB,宽带LFM信号信噪比提升约8～9 dB,有效提升了低虚警概率下信号的检测概率。湖试结果表明,虚警概率为0.1时检测概率可提升至0.9以上,验证了该方法的有效性。     

小波包节点分段阈值降噪在水声监听中的应用*

水声目标信号在发送、传播过程中,易受到环境噪声、系统自噪声等影响,因此水声监听过程中目标信号会掺杂大量噪声信息。为提高获取目标信号的准确性和可靠性,降低噪声,在已有小波分析基础上,提出小波包节点相对能量判断最优分解层,最优分解层节点系数分段阈值处理重构方法,实现水声监听信号分频段去噪。将0.1 kHz~8.4 k Hz实验数据按节点频率排序划分为5个强弱不同的频段信号实现消噪提取,结果表明该方法可将噪声信号与目标信号有效分离,与全局单一阈值相比,具有较好降噪能力。该方法打破了小波阈值去噪高频处理的局限性,提高了识别精度,改善了全局单一阈值去噪存在的短板,在鱼类分析识别、舰船监听、深海探测等方面具有一定的推广和应用价值。     

小波分析在激光多普勒信号处理中的应用

 提出将激光多普勒测速仪(LDV)应用于车载惯性导航系统中,阐述了激光多普勒自身速度仪的基本原理和小波变换的相关理论,并运用小波变换对多普勒信号进行检测、去噪及提取多普勒频率,仿真及实验结果表明：信号进行小波分解后,对每一级小波进行阈值处理,得到了较好的去噪效果;在小波降噪常见的阈值原则中,无偏似然估计阈值和极值阈值不容易丢失信号中的有用成分,而启发式阈值原则和固定阈值原则可以更有效地去除噪声;对于提取多普勒频率而言,小波变换与快速傅里叶变换所得的结果是一致的,而小波变换不但可以求出系统自身的运动速度,而且还可以求出对应速度发生的时刻。     

基于小波阀值消噪的硝铵NQR信号处理

针对硝铵（AN）核电四极矩共振（NQR）信号通过傅立叶变换频域分析缺乏信号时域信息的特点,对硝铵NQR信号进行时频分析,达到从强背景噪声下检测出NQR信号的目的. 引入小波分析阀值去噪的方法对硝铵NQR信号进行处理. 对处理后数据与标准信号之间的相关系数进行分析. 实验结果表明小波阀值去噪方法可以成功检测到硝铵的NQR信号.     

Harmonic signal extraction from noisy chaotic interference based on synchrosqueezed wavelet transform

For the harmonic signal extraction from chaotic interference, a harmonic signal extraction method is proposed based on synchrosqueezed wavelet transform(SWT). First, the mixed signal of chaotic signal, harmonic signal, and noise is decomposed into a series of intrinsic mode-type functions by synchrosqueezed wavelet transform(SWT) then the instantaneous frequency of intrinsic mode-type functions is analyzed by using of Hilbert transform, and the harmonic extraction is realized. In experiments of harmonic signal extraction, the Duffing and Lorenz chaotic signals are selected as interference signal, and the mixed signal of chaotic signal and harmonic signal is added by Gauss white noises of different intensities.The experimental results show that when the white noise intensity is in a certain range, the extracting harmonic signals measured by the proposed SWT method have higher precision, the harmonic signal extraction effect is obviously superior to the classical empirical mode decomposition method.     

小波包自适应阈值语音降噪新算法

为了克服低信噪比输入下,语音增强造成语音清音中的弱分量损失,造成重构信号包络失真的问题。论文提出了一种新的语音增强方法。该方法根据语音感知模型,采用不完全小波包分解拟合语音临界频带,并对语音按子带能量进行清浊音区分处理,在阈值计算上,提出了一种清浊音分离,基于子带信号能量的小波包自适应阈值算法。通过仿真实验,客观评测和听音测试表明,该算法在低信噪比输入时较传统算法,能够更加有效地减少重构信号包络失真,在不损伤语音清晰度和自然度的前提下,使输出信噪比明显提高。将该算法与能量谱减法结合,进行二次增强能进一步提高降噪输出的语音质量。