Vibration and dynamic buckling of shear beam-columns on elastic foundation under moving harmonic loads

The vibration and buckling of an infinite shear beam-column, which considers the effects of shear and the axial compressive force, resting on an elastic foundation have been investigated when the system is subjected to moving loads of either constant amplitude or harmonic amplitude variation with a constant advance velocity. Damping of a linear hysteretic nature for the foundation was considered. Formulations in the transformed field domains of time and moving space were developed, and the response to moving loads of constant amplitude and the steady-state response to moving harmonic loads were obtained using a Fourier transform. Analyses were performed to examine how the shear deformation of the beam and the axial compression affect the stability and vibration of the system, and to investigate the effects of various parameters, such as the load velocity, load frequency, shear rigidity, and damping, on the deflected shape, maximum displacement, and critical values of the velocity, frequency, and axial compression. Expressions to predict the critical (resonance) velocity, critical frequency, and axial buckling force were proposed.     

STEADY-STATE RESPONSE OF A TIMOSHENKO BEAM ON AN ELASTIC HALF-SPACE UNDER A MOVING LOAD

By introducing the equivalent stiffness of an elastic half-space interacting with a Timoshenko beam, the displacement solution of the beam resting on an elastic half-space subjected to a moving load is presented. Based on the relative relation of wave velocities of the half-space and the beam, four cases with the combination of different parameters of the half-space and the beam, the system of soft beam and hard half-space, the system of sub-soft beam and hard half-space, the system of sub-hard beam and soft half-space, and the system of hard beam and soft half-space are considered. The critical velocities of the moving load are studied using dispersion curves. It is found that critical velocities of the moving load on the Timoshenko beam depend on the relative relation of wave velocities of the half-space and the beam. The Rayleigh wave velocity in the half-space is always a critical velocity and the response of the system will be infinite when the load velocity reaches it. For the system of soft beam and hard half-space, wave velocities of the beam are also critical velocities. Besides the shear wave velocity of the beam, there is an additional minimum critical velocity for the system of sub-soft beam and hard half-space. While for systems of (sub-) hard beams and soft half-space, wave velocities of the beam are no longer critical ones. Comparison with the Euler-Bernoulli beam shows that the critical velocities and response of the two types of beams are much different for the system of (sub-) soft beam and hard half-space but are similar to each other for the system of (sub-) hard beam and soft half space. The largest displacement of the beam is almost at the location of the load and the displacement along the beam is almost symmetrical if the load velocity is smaller than the minimum critical velocity (the shear wave velocity of the beam for the system of soft beam and hard half-space). The largest displacement of the beam shifts behind the load and the asymmetry of the displacement along the beam increases with the increase of the load velocity due to the damping and wave radiation. The displacement of the beam at the front of the load is very small if the load velocity is larger than the largest wave velocity of the beam and the half space. The results of the present study provide attractive theoretical and practical references for the analysis of ground vibration induced by the high-speed train.     

正交各向异性地基平面问题动力响应研究

以位移分量为基本未知量,在直角坐标系下建立正交各向异性地基的平面应变问题动力偏微分方程．采用Laplace-Fourier变换和逆变换方法,引入初始条件和边界条件,推导了任意形式表面动荷载作用下正交各向异性地基平面问题在时域内动力反应的积分形式解．基于理论解,编制了相应的计算程序,并对正交各向异性土
体表面作用线性移动谐振荷载进行了算例分析,研究了土体参数、荷载移动速度、荷载频率不同而导致的土体表面各点竖向位移幅值的变化规律,以及荷载速度对竖向应力分量的影响规律．数值分析结果表明：土体的各向异性、荷载频率和移动速度对表面位移幅值有较大影响,土体阻尼比对于荷载中心点附近的位移幅值影响较小;荷载移动速度对于竖向应力分量有较大影响,这对工程实践具有重要指导意义．     

Rigid Plastic Plates under a Concentrated Moving Load∗

A rigid-plastic rectangular plate subjected to a moving transverse load is analyzed. The load is too large for the plate to be supported under static conditions. The present study indicates that there is a critical value for the moving load, above which the crossing cannot be made, irrespective of its speed. The relation between the moving load and its speed is given for values less than ciritical, as well as the distribution of displacement for a simply supported rectangular plate.     

爆炸载荷特征参数对无限长圆柱壳弹性动态响应的影响

采用含有三角脉冲载荷和准静压载荷的爆炸载荷加载,利用单自由度模型对无限长圆柱壳体（即等效平面应变圆环）的弹性动态响应进行了力学分析,获得了径向位移响应解析解及准静压阶段弹性响应振幅的解析解。基于所得解析解,通过控制变量法分析了载荷压力及载荷分界点时刻（即三角脉冲载荷与准静压载荷作用的分界点时刻）对径向位移最大值、准静压阶段弹性响应振幅的影响规律,更加深入地研究了爆炸载荷对结构响应的影响。本文主要从准静压幅值与三角脉冲峰值的比值以及载荷分界点时刻两个主要特征参数入手,结合结构的呼吸振动频率来研究爆炸载荷对无限长圆柱壳弹性动态响应的影响。在研究中发现存在临界时刻:当载荷分界点时刻早于临界时刻时,径向位移最大值出现在准静压阶段;当载荷分界点时刻晚于临界时刻时,获得了便于直观判断径向位移达到最大值时所处载荷阶段的分区图。基于前述解析解的分析,还获得了不同影响因素导致的振幅变化的单调性分区图,便于判别载荷压力的变化所致的准静压阶段振幅的增减趋势。通过研究获得的爆炸压力载荷对结构响应的影响规律,可为爆炸容器设计以及结构防护基础研究提供参考。     

Dynamic analysis to infinite beam under a moving line load with uniform velocity

I.IntroductionAninfinitebeamonelasticfoundationnotonlycanbelookedonasdynamicmodelforaSuspensionbridgeoratensiondiagonalbridgel']butalsocanbeusedindynamicsanalysistoarailtrack,therefore,dynamicresponseofinfinitebeamundermovillgloadhasbecomethefocusofdiscussioninpastseveraldecades.TheproblemalsohasbeeninvestigatedbyTimoshenko12j,Frybal'],Steelel'],Lee15],etal.Wefind,however,thatallofthestudiesonthissubjectonlydiscussedmovingpointloadproblem.Actually,eitherautomobileloadoratrainloadisalinedist…     

Wavelet approach to vibratory analysis of surface due to a load moving in the layer

The paper analyses theoretically the surface vibration induced by a point load moving uniformly along a infinitely long beam embedded in a two-dimensional viscoelastic layer. The beam is placed parallel to the traction-free surface and the layer under the beam is assumed to be a half space. The response due to a harmonically varying load is investigated for different load frequencies. The influence of the layer damping and moving load speed on the level of vibrations at the surface is analysed and analytical closed form solutions in the integral form for the displacement amplitude and the amplitude spectra are derived. Approximate displacement values depending on Young’s modulus and mass density of layers are obtained. The mathematical model is described by the Euler–Bernoulli beam equation, Navier’s elastodynamic equation of motion for the elastic medium and appropriate boundary and continuity conditions. A special approximation method based on the wavelet theory is used for calculation of the displacements at the surface.     

Vibrations and Dissipative Heating of a Viscoelastic Beam under a Moving Load

The vibrations and dissipative heating of an infinite viscoelastic beam under a moving load are studied on the basis of Timoshenko beam theory. The influence of transverse-shear strain and rotary inertia on the critical velocities of the moving load, the amplitude of bending vibration, and the temperature of dissipative heating is analyzed__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 1, pp. 69–76, January 2005.     

Dynamics of a system comprising an orthotropic layer and orthotropic half-plane under the action of an oscillating moving load

This paper investigates the dynamic response to a time-harmonic oscillating moving load of a system comprising a covering layer and half-plane, within the scope of the piecewise-homogeneous body model utilizing of the exact equations of the linear theory of elastodynamics. It is assumed that the materials of the layer and half-plane are anisotropic (orthotropic), and that the velocity of the line-located time-harmonic oscillating moving load is constant as it acts on the free face of the covering layer. Our investigations were carried out for a two-dimensional problem (plane-strain state) under subsonic velocity for a moving load in complete and incomplete contact conditions. The corresponding numerical results were obtained for the stiffer layer and soft half-plane system in which the modulus of elasticity of the covering layer material (for the moving direction of the load) is greater than that of the half-plane material. Numerical results are presented and discussed for the critical velocity, displacement and stress distribution for various values of the problem parameters. In particular, it is established that the critical velocity of the moving load is controlled mainly with a Rayleigh wave speed of a half-plane material and the existence of the oscillation of the moving load causes two types of critical velocity to appear: one of which is less, but the other one is greater than that attained for the case where the mentioned oscillation is absent.     

移动的线源平稳随机荷载激励下梁的随机响应

利用广义Ｄｕｈａｍｅｌ积分和积分变换，研究了粘弹性Ｋｅｌｖｉｎ地基上无限长梁在运动的线源平稳随机荷载作用下的随机响应．发现此时梁的挠度响应为非平稳随机过程．通过引入随动坐标系，建立了有明确物理意义的随动谱分析方法，使随机位移响应在随动坐标系下成为平稳随机过程     

Transient responses of beams and plates subject to travelling load. Miscellaneous results

The steady-state response of a free and infinite Timoshenko beam is specified analytically in terms of non-dimensional displacements and stresses. The beam is supposed loaded by a travelling concentrated force or a moving step load. By a validated explicit numerical calculation, it is shown how a load travelling on a beam at constant velocity, from defined time and abscissa, generates a response which evolves towards the steady-state solution for a part, and towards a quantified transient solution for another part. Asymptotic values are given for the transient displacements and stresses according to the time and the speed of the loading. The solution is also found for a plate subject to a pressure, which spreads respecting the cylindrical symmetry. It is possible to identify in the response a part which follows the pressure front, and which is comparable with the steady-state response of a beam, and another transient part, which generates displacements and stresses with a much less oscillating character. An asymptotic solution is also presented for the plate.The whole series of the results makes it possible to better understand qualitatively the beginning of the transient response of a beam or of a plate to a moving load, and also makes it possible to estimate the stresses and displacements without needing specialised numerical codes.     

MODEL EXPERIMENT ABOUT RESPONSE OF FLOATING ICE SHEET SUBJECTED TO MOVING AIR CUSHION VEHICLE

基于弹性薄板振动微分方程和相似理论,建立了气垫船在浮冰上运动的原型系统与模型系统参数之间的相似对应关系. 导出了浮冰层自由振动波形传播的相速度和群速度计算公式,明确了相速度的极小值和浅水波传播速度即为气垫船的第一、第二临界速度. 根据研制的高精度非接触式激光位移测量系统,在变水深拖曳水槽中, 开展了不同速度移动气垫载荷激励薄膜变形响应的系列实验,证实了存在使薄膜变形达到最大的移动气垫载荷临界速度. 第一临界速度使气垫载荷之后的薄膜产生最大的下陷变形,第二临界速度使气垫载荷之前的薄膜产生最大的上凸变形. 通过实验结果进一步分析了气垫速度、高度、压力及水深等参数对薄膜变形和临界速度的影响,揭示了移动气垫载荷激励薄膜变形响应的聚能共振增幅机理,为利用气垫船实施有效破冰提供了依据.     

航行气垫船激励浮冰响应的模型实验研究

基于弹性薄板振动微分方程和相似理论,建立了气垫船在浮冰上运动的原型系统与模型系统参数之间的相似对应关系. 导出了浮冰层自由振动波形传播的相速度和群速度计算公式,明确了相速度的极小值和浅水波传播速度即为气垫船的第一、第二临界速度. 根据研制的高精度非接触式激光位移测量系统,在变水深拖曳水槽中, 开展了不同速度移动气垫载荷激励薄膜变形响应的系列实验,证实了存在使薄膜变形达到最大的移动气垫载荷临界速度. 第一临界速度使气垫载荷之后的薄膜产生最大的下陷变形,第二临界速度使气垫载荷之前的薄膜产生最大的上凸变形. 通过实验结果进一步分析了气垫速度、高度、压力及水深等参数对薄膜变形和临界速度的影响,揭示了移动气垫载荷激励薄膜变形响应的聚能共振增幅机理,为利用气垫船实施有效破冰提供了依据.      

高速荷载下多孔饱和地基的动力响应

研究高速荷载作用下梁与多孔饱和半空间的动力响应。由Fourier变换求解多孔饱和固体的动力基本方程，根据梁与半空间的接触条件得出多孔饱和半空间上梁的垂直位移的表达式。文中的数值算例考虑了荷载移动速度对梁的动力位移的影响，并与相应的弹性半空间问题作了对比。从算例中可以发现荷载移动速度对动力位移有很大的影响，当移动速度与半空间的表面波速相近时，地面会当产生很大的振动，同时还发现当速度大于介质的剪切波速时，多孔饱和半空间上梁的动力响应与弹性半空间上梁的动力响应有很大的差别。     

Cooling of a composite slab

A mixed boundary value problem associated with the diffusion equation, that involves the physical problem of cooling of an infinite parallel-sided composite slab, is solved completely by using the Wiener-Hopf technique. An analytical expression is derived for the sputtering temperature at the quench front being created by a cold fluid moving on the upper surface of the slab at a constant speed v. The dependence of the various configurational parameters of the problem under consideration, on the sputtering temperature, is rather complicated and representative tables of numerical values of this important physical quantity are prepared for certain typical values of these parameters. Asymptotic results in their most simplified forms are also obtained when (i) the ratio of the thicknesses of the two materials comprising the slab is very much smaller than unity, and (ii) the quench-front speed v is very large, keeping the other parameters fixed, in both the cases.     

Cooling of a composite slab

A mixed boundary value problem associated with the diffusion equation, that involves the physical problem of cooling of an infinite parallel-sided composite slab, is solved completely by using the Wiener-Hopf technique. An analytical expression is derived for the sputtering temperature at the quench front being created by a cold fluid moving on the upper surface of the slab at a constant speed v. The dependence of the various configurational parameters of the problem under consideration, on the sputtering temperature, is rather complicated and representative tables of numerical values of this important physical quantity are prepared for certain typical values of these parameters. Asymptotic results in their most simplified forms are also obtained when (i) the ratio of the thicknesses of the two materials comprising the slab is very much smaller than unity, and (ii) the quench-front speed v is very large, keeping the other parameters fixed, in both the cases.     

Three dimensional solution of thick rectangular simply supported plates under a moving load

Dynamic behavior of continuous systems such as beams and plates, under a moving load is an important engineering subject. In this paper, 3D elasticity equations are solved by use of the displacement potential functions and the exact solution of a simply supported thick rectangular plate under moving load is presented. For this purpose, the governing equations in terms of displacements, Navier’s equations, are converted to two linear partial differential equations of forth and second order using displacement potential functions. Then the governing equations in terms of the potential functions are solved using the separation of variables and Laplace integral transform, satisfying exact initial and boundary conditions. In order to validate the present approach, the obtained results of this study are compared with the results of the classical theory of plates for thin and existing solutions for moderately thick plates. Also, it is observed that the speed of a moving load has an important effect on the dynamic response of plate.     

Forerunning mode transition in a continuous waveguide

We have discovered a forerunning mode transition as the periodic wave changing the state of a uniform continuous waveguide. The latter is represented by an elastic beam initially rested on an elastic foundation. Under the action of an incident sinusoidal wave, the separation from the foundation occurs propagating in the form of a transition wave. The critical displacement is the separation criterion. Under these conditions, the steady-state mode exists with the transition wave speed independent of the incident wave amplitude. We show that such a regime exists only in a bounded domain of the incident wave parameters. Outside this domain, for higher amplitudes, the steady-state mode is replaced by a set of local separation segments periodically emerging at a distance ahead of the main transition point. The crucial feature of this waveguide is that the incident wave group speed is greater than the phase speed. This allows the incident wave to deliver the energy required for the separation. The analytical solution allows us to show in detail how the steady-state mode transforms into the forerunning one. The latter studied numerically turns out to be periodic. As the incident wave amplitude grows the period decreases, while the transition wave speed averaged over the period increases to the group velocity of the wave. As an important part of the analysis, the complete set of solutions is presented for the waves excited by the oscillating or/and moving force acting on the free beam. In particular, an asymptotic solution is evaluated for the resonant wave corresponding to a certain relation between the load's speed and frequency.     

Radiation emitted by a constant load moving uniformly in a circle on an elastically supported membrane

Wave radiation is studied which is due a constant load moving with a constant speed along a circular path over an unbounded membrane on a elastic foundation. The steady-state solution of the problem is obtained, showing that the radiation occurs for all load velocities. It is shown that the elastic field radiated by the supercritically moving load is confined in a spiral-like apex. The membrane displacements at the boundaries of this apex are discontinuous. The radiated energy per period of load rotation is calculated showing a discrete energy spectrum. For increasing load velocities, the total amount of radiated energy becomes larger. It also turns out that the major part of the radiated energy follows the direction of the load motion.     

Plane problems in piezoelectric media with elliptic inclusion

I.IntroductionPiezoelectricmedia,asa"ex\'typeoffullctionalmaterial.arex'idel}'appliedtomanytechnologicalfieldsduetoitselectronlechallicalcouplillgeffect.Defects.likethatofothermaterials.arenotlimitedtocracks.x'oidsandinclusionsillpiezoelectricmaterialsorelements.Yet,stressconcentrationsornoll-ullitbrllldistl-ibutionsofelectricfieldillducedbythosedefectsareoneofthehe}l'filctorswllicllwouldleadpiezoelectricstructurestonon-normalfailure.Therel'ore.itisofgrealimportancetostudythepropertiesofthos…