Synthesis and characterization of new poly(azomethine ester)s having phenylthiourea units

New polyesters having azomethine and phenylthiourea groups in the polymer backbone were synthesized by interfacial polycondensation method. The dihydroxy monomer N-(4-hydroxy-3-methoxybenzal) N′-(4′-hydroxyphenyl)thiourea was condensed with six diacid chlorides: terephthaloyl, isophthaloyl, azeloyl, suberoyl, pimeloyl and adipolyl chlorides. The resulting polyesters were characterized by viscosity, IR, NMR and TGA analysis. The wholly aromatic poly(azomethine ester) derived from terephthaloyl chloride when blended with polyaniline/NH₄OH, polyaniline/HCl and pure polyaniline shows conductance in the range 3.2 × 10⁻³-0.91 × 10⁻¹ S cm⁻¹.     

Synthesis and electrochemical properties of nanocomposites containing poly(3,6-bis(phenylamino)-2,5-dichlorobenzoquinone and multiwalled carbon nanotubes

The method of synthesizing nanocomposites based on multiwalled carbon nanotubes and a new polymer poly(3,6-bis(phenylamino)-2,5-dichlorobenzoquinone) containing polyaniline chains with electroactive substituents in the N-position is developed, and the electrochemical properties of the composites are studied. The in situ oxidative polymerization of N-substituted aniline performed in the presence of multiwalled carbon nanotubes makes it possible to design an organized, effective structure of the conducting composite material with enhanced electrochemical capacity and stable capacity parameters during long cycling in protic (1 mol/L H₂SO₄) and aprotic (1 mol/L LiClO₄ in propylene carbonate) electrolytes.     

Synthesis of novel fluorescent molecule and its polymeric form with aniline as fluorescent and supercapacitor electrode materials

In this study, a fluorescent material, 2‐naphthyl‐4‐amino benzoate, is synthesized by the esterification of 4‐aminobenzoic acid with 2‐naphthol. This molecule is used in the bulk polymerization of aniline, which results in the formation of poly(aniline‐2‐naphthyl‐4‐aminobenzoate). For comparison, polyaniline and also poly(aniline‐4‐aminobenzoic acid) salts are prepared via bulk polymerization. Formation and properties of these polymeric materials are evaluated by Fourier‐transform infrared (FT‐IR), ¹³C nuclear magnetic resonance, matrix‐assisted laser desorption ionization, UV‐Vis, Fluorescence, X‐ray diffraction (XRD), Field emission‐scanning electron microscopy (FE‐SEM), Differential scanning calorimetry (DSC), thermogravimetric analysis, electrical resistance and electrochemical techniques. P(ANI‐2NA4ABA) is obtained in nanofiber morphology in 106 wt% yield with respect to the amount of aniline used with comparable conductivity of conventional polyaniline salts. This polymer salt is stable up to 220°C and indicates melting at 146°C on heating and crystal formation at 128°C on cooling. This polymer shows higher wavelength fluorescence compared to the conventional polyaniline salts. This polymer is used as an electrode material without binder, which shows a specific capacitance of 360 F g^?1 at 0.25 A g^?1.     

Effect of aromatic substitution in aniline on the properties of polyaniline

Substitution in aniline has tremendous effect in the synthesis of poly(substituted anilines) as well as in their properties. In this investigation polyaniline (PANI), poly(m-nitro aniline) (PMNA), poly(m-amino phenol) (PMAP) and poly(o-ethyl aniline) (POEA) were synthesized by oxidative polymerization under identical conditions. Different properties were measured and compared with PANI to find out the presence of electron donating -OH group, electron withdrawing -NO₂ group and less effecting ethyl group on the properties of poly(substituted anilines). It was found that presence of any type of substitution in the benzene ring of aniline increases the solubility of the resulted polymer but reduces the yield, degree of polymerization, thermal stability, electrical and thermal conductivity. The colors, bulk density, particle size, percentage of crystallinity vary considerably depending on the nature of substitution.     

Film Composites of polyimide with polyaniline and poly(aniline-<Emphasis Type="Italic">co</Emphasis>-anthranilic acid)

New two-component composite polymer films are prepared and studied in terms of thermal stability and stress-strain properties. The matrix component of the composite is polyimide based on 3,3′,4,4′-(1,3-diphenoxybenzene)tetracarboxylic dianhydride and 4,4′-bis(4″-aminophenoxy)diphenyl sulfone. Another component is polyaniline or the copolymer poly(aniline-co-2-aminobenzoic acid). Composite films are cast from mixed solutions of individual polymers in N-methyl-2-pyrrolidone. Interpolymer interactions in polyimide composites with polyaniline or the copolymer of aniline and 2-aminobenzoic acid are investigated via viscometry and IR spectroscopy. The thermal treatment of composite films with poly(aniline-co-2-aminobenzoic acid) results in decarboxylation of the copolymer and formation of polyimide-polyaniline composite films. The morphology, microphase structure, and porosity of the composite films are different from those of the films cast from solutions of polyimide-polyaniline mixtures.     

Studies on cellulose acetate and sulfonated poly(ether ether ketone) blend ultrafiltration membranes

New ultrafiltration membranes based on chemically and thermally stable arylene main-chain polymers have been prepared by blending the sulfonated poly(ether ether ketone) with cellulose acetate in various compositions in N,N^′-dimethylformamide as solvent by phase inversion technique. Prepared membranes have been subjected to ultrafiltration characterizations such as compaction, pure water flux, water content, and membrane hydraulic resistance. The pore statistics and molecular weight cut-off (MWCO) of the membranes have been estimated using proteins such as trypsin, pepsin, egg albumin and bovine serum albumin. The pore size increased with increasing concentrations of sulfonated poly(ether ether ketone) in the casting solution. Similarly, the MWCOs of the membranes ranged from 20 to 69 kDa, depending on the various polymer compositions. Surface and cross-sectional morphologies of membranes were analyzed using scanning electron microscopy. The effects of polymer compositions on the above parameters were analyzed and the results are compared and discussed with those of pure cellulose acetate membranes.     

Electrochemical storage properties of polyaniline-, poly(N-methylaniline)-, and poly(N-ethylaniline)-coated pencil graphite electrodes

Three types of conducting polymers, polyaniline (PANI), poly(N-methylaniline) (PNMA), poly(N-ethylaniline) (PNEA) were electrochemically deposited on pencil graphite electrode (PGE) surfaces characterized as electrode active materials for supercapacitor applications. The obtained films were electrochemically characterized using different electrochemical methods. Redox parameters, electro-active characteristics, and electrostability of the polymer films were investigated via cyclic voltammetry (CV). Doping types of the polymer films were determined by the Mott-Schottky method. Electrochemical capacitance properties of the polymer film coating PGE (PGE/PANI, PGE/PNMA, and PGE/PNEA) were investigated by the CV and potentiostatic electrochemical impedance spectroscopy (EIS) methods in a 0.1 M H₂SO₄ aqueous solution. Thus, capacitance values of the electrodes were calculated. Results show that PGE/PANI, PGE/PNMA, and PGE/PNEA exhibit maximum specific capacitances of 131.78 F g^?1 (≈ 436.50 mF cm^?2), 38.00 F g^?1 (≈ 130.70 mF cm^?2), and 16.50 F g^?1 (≈ 57.83 mF cm^?2), respectively. Moreover, charge-discharge capacities of the electrodes are reported and the specific power (SP) and specific energy (SE) values of the electrodes as supercapacitor materials were calculated using repeating chronopotentiometry.     

The preparation of conducting polyaniline�Csilver and poly(p-phenylenediamine)�Csilver nanocomposites in liquid and frozen reaction mixtures

The oxidation of aniline with silver nitrate in 1?mol?L^?1 acetic acid at 20?°C yielded a composite of two conducting components, polyaniline and silver; the acceleration with 1?mol% of p-phenylenediamine is needed for efficient synthesis. The yield and molecular weight increased when aniline was copolymerized with 10?mol% p-phenylenediamine. Such product displayed metallic conductivity below 180?K and semiconductor type above this temperature. As the result, the conductivity was the same at 100 and 300?K. The oxidation of p-phenylenediamine alone with silver nitrate also produced a conducting composite having the conductivity of 1,750?S cm^?1 despite the assumed nonconductivity of poly(p-phenylenediamine). The present study demonstrates that all oxidations proceeded also in frozen reaction mixtures at ?24?°C, i.e., in the solid state. In most cases, molecular weights of polymer component increased, the conductivity of composites with silver improved, to 2,990?S?cm^?1 for poly(p-phenylenediamine)?Csilver, and remained high after deprotonation with 1?mol?L^?1 ammonium hydroxide.     

质子交换膜用磺化聚芳醚的合成与性能研究

合成了一种用于质子交换膜的新型磺化聚芳醚. 由于特殊单体结构的设计, 在聚合物主链上引入取代基对主链进行保护, 用氯磺酸直接磺化方法在聚芳醚高分子侧基上引入磺酸功能基, 实现了聚合物磺化结构的可控定位合成, 得到了稳定性较好的磺化聚芳醚. 用溶液浇膜法制备了质子交换膜, 考察了质子交换膜的各种性能. 结果表明, 这种膜具有良好的成膜性, 水解性稳定性和优异热稳定性能, 5%的热失重温度为362.3 ℃. 氧化稳定性在80 ℃的Fenton’s试剂(3%的过氧化氢和2 mg/L的FeSO₄)中进行, 膜在69 min时才开始变碎, 表现出良好的氧化稳定性.     

Synthesis and Properties of Self‐doped Polyaniline with Polycationic Templates via Biocatalysis

The enzyme horseradish peroxidase (HRP) was used to polymerize acid‐functionalized anilines to make self‐doped polymer in the presence of a polycationic template. Anionic templates such as sulfonated polystyrene (SPS) could not function as a suitable template for the polymerization of acid‐functionalized aniline derivatives. Several types of polyelectrolytes were used as templates to observe the structural effects and doping behavior of polyaniline/template complexes. The synthesis is straightforward and the conditions are mild in that the polymerization of conducting polyanilines may be carried out in buffered solutions as high as pH 6, with a stoichiometric amount of hydrogen peroxide and catalytic amount of enzyme. The conductivity of these enzymatically synthesized self‐doped polymers was relatively high without additional doping due to the self‐doping of the acid moieties. The conductivity did not decrease dramatically at pH 3 as is the usual case of unsubstituted HCl‐doped polyaniline and maintained good conductivity even at pH 6. The measured conductivity at pH 4～pH 6 is around 10^?4 S/cm to 10^?6 S/cm.     

Sulfonated polyaniline network grafted multi-wall carbon nanotubes for enzyme immobilization, direct electrochemistry and biosensing of glucose

A new nanomaterial was prepared by grafting a layer of sulfonated polyaniline network (SPAN-NW) on to the surface of multi-walled carbon nanotube (MWNT) and effectively utilized for immobilization of an enzyme and for the fabrication of a biosensor. SPAN-NW was formed on the surface of MWNT by polymerizing a mixture of diphenyl amine 4-sulfonic acid (DPASA), 4-vinyl aniline (VA) and 2-acrylamido-2-methyl-1-propane sulfonic acid (APASA) in the presence of amine functionalized MWNT (MWNT-NH₂). The MWNT-g-SPAN-NW was immobilized with glucose oxidase (GOx) to fabricate the SPAN-NW/GOx biosensor. MWNT-g-SPAN-NW/GOx electrode showed direct electron transfer (DET) for GOx with a fast heterogeneous electron transfer rate constant (k_s) of 4.11 s^− 1. The amperometric current response of MWNT-g-SPAN-NW/GOx biosensor shows linearity up to 9 mM of glucose, with a correlation coefficient of 0.99 and a detection limit of 0.11 μM (S/N = 3). At a low applied potential of − 0.1 V, MWNT-g-SPAN-NW/GOx electrode possesses high sensitivity (4.34 μA mM^− 1) and reproducibility towards glucose.     

Direct copolymerization of sulfonated poly(phthalazinone arylene ether)s for proton‐exchange‐membrane materials

Sulfonated poly(phthalazinone ether ketone) (SPPEK) copolymers and sulfonated poly(phthalazinone ether sulfone) (SPPES) copolymers containing pendant sodium sulfonate groups were prepared by direct copolymerization. The reaction of disodium 3,3′‐disulfonate‐4,4′‐difluorobenzophenone (SDFB‐Na), 4,4′‐difluorobenzophenone (DFB), and 4‐(4‐hydroxyphenyl)‐1(2H)‐phthalazinone (DHPZ) at 170 °C in N‐methyl‐2‐pyrrolidione containing anhydrous potassium carbonate gave SPPEKs. SPPESs were similarly obtained with 3,3′‐disulfonate‐4,4′‐difluorophenyl sulfone, 4‐fluorophenyl sulfone (DFS), and DHPZ as monomers. The sulfonic acid groups, being on deactivated positions of the polymer backbone, were expected to be hydrolytically more stable than postsulfonated polymers. Fourier transform infrared and ¹H NMR were used to characterize the structures and degrees of sulfonation of the sulfonated polymers. Membrane films of SPPEKs with SDFB‐Na/DFB molar feed ratios of up to 60/40 and SPPESs with sulfonated 4‐fluorophenyl sulfone/DFS molar feed ratios of up to 50/50 were cast from N,N‐dimethylacetamide polymer solutions. Membrane films in acid form were then obtained by the treatment of the sodium‐form membrane films in 2 N sulfuric acid at room temperature. An increase in the number of sulfonate groups in the copolymers resulted in an increased glass‐transition temperature and enhanced membrane hydrophilicity. The sodium‐form copolymers were thermally more stable than their acid forms. The proton conductivities of the acid‐form copolymers with sulfonated monomer/unsulfonated monomer molar feed ratios of 0.5 and 0.6 were higher than 10^?2 S/cm and increased with temperature; they were less temperature‐dependent than those of the postsulfonated products. SPPESH‐50 showed higher conductivity than the corresponding postsulfonated poly(phthalazinone ether sulfone). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2731–2742, 2003     

Electrochemical behaviour of conducting polymers obtained into clay-catalyst layers. An in situ Raman spectroscopy study

In this paper we present the study of the electrochemical properties of the following conducting polymers: poly(o-anisidine), polyaniline and copolymers of aniline and o-anisidine obtained by a new synthetic method. The polymers are synthesized in free-of-acid conditions, using an activated montmorillonitic clay catalyst, known as Maghnite-H⁺ (Mag-H) as proton source. The electrochemical behaviour of poly(o-anisidine) created using Mag-H (PoANI-MagH) and their copolymers with aniline is quite different of those polymers created in HCl solution. In situ Raman data suggest that the structure of PoANI-MagH is a mixture of conducting (polyaniline-type) and redox (phenoxazine or phenazine-type) segments.     

Oxidative Copolymerization of Aniline with o- and p-Nitroaniline by Ammonium Per Sulfate: Kinetic and Pathway

The kinetic study on the oxidation of aniline with o- and p-nitroaniline by ammonium persulfate (APS) has been carried out. The course of copolymerization was investigated by UV-vis spectroscopy and structural characterization was studied by FTIR spectral analysis. The electronic spectra of the copolymers poly(aniline-co-p-nitroaniline) and poly(aniline-co-o-nitroaniline) show hypsochromic shift. The shift has been observed in the bands corresponding to π → π? transition as well as in the exciton transition. The presence of nitro-group not only affects the oxidative polymerization window but also brings about the remarkable changes in the optical and electronic properties of parent polymer polyaniline. The poly(aniline-co-nitroaniline) has been shown multiple color transition (yellow → lightgreen → darkgreen) as the pH of the system changes with progress of polymerization reaction. The increase in absorbance recorded at various time intervals with increasing concentration of aniline, o- and p-nitroaniline, which indicates the growth of polymer formation. The first order kinetics is suggested as the degradation curve is consistent well byan exponential decay of APS. The resulting first-order rate constant was used to calculate the rate of poly(aniline-co-nitroaniline) formation using the rate equation –d[A]/dt = kcⁿ. The reaction shows first-order dependence for each reactant.     

Cobalt ion-doped polyaniline,poly(N-methylaniline), and poly(N-ethylaniline): electrosynthesis and characterisation using electrochemical methods in acidic solutions

Cobalt ion (Co²⁺)-doped polyaniline (PANI-Co), poly(N-methylaniline) (PNMA-Co), and poly(N-ethylaniline) (PNEA-Co) films were synthesised electrochemically on a pencil graphite electrode (PGE) and their electrochemical properties were investigated for supercapacitor applications. The polymer film-coated electrodes (PGE/PANI-Co, PGE/PNMA-Co, and PGE/PNEA-Co) thus obtained were characterised by scanning electron microscopy (SEM) and different electrochemical methods. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements were employed in 0.1 M H₂SO₄ solution to calculate the specific capacitance (C _S) values of the electrodes. The maximum C _S of 192.94 F g^?1, 139.83 F g^?1, and 47.12 F g^?1 were achieved for PGE/PANI-Co, PGE/PNMA-Co, and PGE/PNEA-Co at 1 mV s^?1, respectively. On the other hand, the charge/discharge stability of the electrodes was analysed using the repeating chronopotentiometry (RCP) method. The RCP measurements indicate that the electrodes could be used as an electrode active material for low voltage supercapacitor applications.     

Chirality induction of polyaniline derivatives through chiral complexation

Chirality induction of π-conjugated polyaniline derivatives was achieved by chiral complexation with chiral palladium(II) complexes. The crystal structure of the chiral conjugated complex with a model compound of the polyaniline, N,N-bis(4^′-dimethylaminophenyl)-1,4-benzoquinonediimine, revealed a chiral propeller twist conformation of the π-conjugated moiety.     

Thermal analysis of polyaniline poly(N-vinylpyrrolidone)-stabilized dispersions

The polyaniline dispersions stabilized with poly(N-vinylpyrrolidone) (PANI/PVP) were synthesized by oxidative polymerization with different mass ratios of PANI and PVP and different molar concentrations of the components in the polymerization mixture. The composite powders prepared from colloidal PANI/PVP dispersions were characterized by thermogravimetry and differential thermal analysis. The change in the ratio of PANI and PVP as well as the starting molar concentrations of aniline hydrochloride and oxidant has influence on the resulting properties of the dispersions. Concerning the doping, the results show that PANI/PVP powders are stable up to approximately 160 °C. Degradation of polymer chains starts at temperatures above 250 °C. The PANI/PVP composite powders with lower content of PANI exhibit slightly higher thermal stability. Further, colloidal PANI/PVP dispersions were screen-printed on aluminum foil for infrared spectroscopic characterization and on poly(ethylene terephthalate) foil for electrical measurements. The sheet resistance of printed layers measured by two-point probe was of the order of tens to thousands of kΩ sq^?1. The influence of both the change in the composition and the drying temperature is discussed.     

New organosilicon derivatives of some analytical reagents: sorbents and metallochromic agents

A synthesis of organosilicon monomeric and polymeric derivatives of 1,4-phenylenediamine, 4-aminoantipyrine, and aniline, which are analytical agents possessing sorption properties, was accomplished. The synthesized organosilicon polymers were studied as sorbents of heavy metals Fe^III, Hg^II and noble metals Ag^I, Au^III, Rh^III, Pd^II, Pt^IV. Poly[(3-N-silsesquioxanylpropyl-4aminoantipyrine)] exhibited high sorption activity with respect to platinum group metals in comparison with poly[N,N´-bis(3-silsesquioxanylpropyl)-1,4-phenylenediamine]. The reaction of poly[(3-N-silsesquioxanylpropyl-4-aminoantipyrine)] practically with all the elements under study was accompanied by coloring. The starting monomer exhibited similar metallochromic properties.     

Chemical and electrochemical grafting of polyaniline onto poly(vinyl chloride): synthesis,characterization, and materials properties

We have designed and developed a new strategy for the chemical and electrochemical graft copolymerization of aniline onto poly(vinyl chloride). For this purpose, first phenylamine groups were incorporated into poly(vinyl chloride) via a nucleophilic substitution reaction in the presence of a solvent composed of 4‐aminophenol, potassium carbonate, and dry N,N‐dimethylformamide at room temperature, in order to avoid cross‐linking. The macromonomer obtained was used in chemical and electrochemical oxidation copolymerization with aniline monomer to yield a poly(vinyl chloride)‐g‐polyaniline (PVC‐g‐PANI) graft copolymer. The chemical structures of samples as representatives were characterized by means of Fourier transform infrared and ¹H nuclear magnetic resonance spectroscopies. The electroactivity behaviors of the synthesized samples were verified under cyclic voltammetric conditions. The electrical conductivity and electroactivity measurements showed that the PVC‐g‐PANI graft copolymer has lower electrical conductivity as well as electroactivity than those of the pure PANI. However, the lower electrical conductivity and electroactivity levels in this material can be improved at the price of solubility and processability. Moreover, the thermal behavior and chemical composition of the synthesized graft copolymer were investigated. Copyright © 2016 John Wiley & Sons, Ltd.     

Oxidative polymerization of p-phenylenediamine

Oxidative polymerization of p-phenylenediamine in a hydrochloric acid solution yields not a polyquinoxaline polymer as described in the literature but a modified poly(1,4-benzoquinonediimine-N,N′-diyl-1,4-phenylene) analogous to polyaniline known as pernigraniline. A new scheme of oxidative polymerization of p-phenylenediamine was suggested.