Synthesis and characterization of thiosemicarbazone derivatives of 2-chloro-4-hydroxy-benzaldehyde and their rhenium(I) complexes

N-Thioamide thiosemicarbazone derived of 2-chloro-4-hydroxy-benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in chloroform gave the adducts [ReX(CO)₃(HL)] (1a X = Cl, R = H; 1a′ X = Br, R = H; 1b X = Cl, R = CH₃; 1b′ X = Br, R = CH₃; 1c X = Cl, R = Ph; 1c′ X = Br, R = Ph) in good yield. Complexes 1a′ and 1b’ were also obtained by the reaction of HL¹ and HL³ with [ReBr(CO)₅] in toluene.All the compounds have been characterized by elemental analysis, mass spectrometry (FAB), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³ and 1a·H₂O were also established by X-ray diffraction. In 1a, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms, forming a five-membered chelate ring, as well as three carbonyl carbon and chloride atoms. The resulting coordination polyhedron can be described as a distorted octahedron.The study of the crystals obtained by slow evaporation of methanol and DMSO solutions of the adducts 1a′ and 1b, respectively, showed the formation of dimer structures based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆]·3H₂O (2a)·3H₂O and [Re₂(L²)₂(CO)₆]·(CH₃)₂SO (2b)·2(CH₃)₂SO. Amounts of these thiosemicarbazonate complexes [Re₂(L)₂(CO)₆] (2) were obtained by reaction of the corresponding free ligands with [ReCl(CO)₅] in dry toluene.In 2a·3H₂O and 2b·2(CH₃)₂SO the dimer structures are established by Re–S–Re bridges, where S is the thiolate sulphur from a N,S-bidentate thiosemicarbazonate ligand. In both structures the rhenium coordination sphere is similar; the dimers are in the same diamond Re₂S₂ face.     

Dialkyl- and diaryl-platinum(II) complexes with secondary phosphines: Preparation,structure and thermal reaction giving the metallopolymer

Alkyl and arylplatinum complexes with 1,5-cyclooctadiene ligand, [PtR₂(cod)] (R = Me, Ph, C₆H₄-p-CF₃, C₆F₅), react with secondary phosphines, PHR′₂ (R′ = i-Bu, t-Bu, Ph), to afford the mononuclear platinum complexes, cis-[PtR₂(PHR′₂)₂] (1a: R = Me, R′ = i-Bu; 1b: R = Me, R′ = t-Bu; 1c: R = Me, R′ = Ph; 2a: R = Ph, R′ = i-Bu; 2b: R = Ph, R′ = t-Bu; 2c: R = R′ = Ph; 3a: R = C₆H₄-p-CF₃, R′ = i-Bu; 3b: R = C₆H₄-p-CF₃, R′ = t-Bu; 3c: R = C₆H₄-p-CF₃, R′ = Ph; 4a: R = C₆F₅, R′ = i-Bu; 4c: R = C₆F₅, R′ = Ph) in 81–98% yields. Molecular structures of the complexes except for 1a, 1c and 2a were determined by X-ray crystallography. Complex 1b has a square-planar structure with Pt–C(methyl) bonds of 2.083(8) and 2.109(8) Å, while the Pt–C(aryl) bonds of 2b–c, 3a–c, 4a and 4c (2.055(1)–2.073(8) Å) are shorter than them. Thermal decomposition of 1b, 2a–c, and 3a–c releases methane, biphenyl or 4,4′-bis(trifluoromethyl)biphenyl as the organic products, which are characterized by NMR spectroscopy. The solid product of the thermal reactions of 2b and 2c were characterized as the metallopolymers formulated as [Pt(PR′₂)₂]_n (5b: R′ = ^tBu; 5c: R′ = Ph), based on the solid-state NMR and elemental analyses.     

Phosphanes with bulky oligosilyl substituents

By reaction of dichloroheptasilane [(SiMe₃)₂MeSi]₂SiCl₂ with lithiumphosphanides LiPHR, the silylphosphanes [(SiMe₃)₂MeSi]₂SiClPHR with R = 2, 4, 6-tri-tert-butylphenyl ( = supermesityl, Mes1) (1) and Si(SiMe₃)₃ ( = hypersilyl, Hyp) (2) were prepared. Both compounds were characterized with X-ray diffraction, multinuclear NMR spectroscopy and elemental analysis. Compound 1 did not react with n-BuLi, but only with a large excess of tert-BuLi. Phosphasilene [(SiMe₃)₂MeSi]₂SiPMes¹ could be identified by a ³¹P NMR signal at +346 ppm. All attempts to separate it from the reaction mixture failed due to many by-products which had formed through SiSi and SiP bond cleavage. Lithiation of 2 was possible with 4.2 equiv. of tert-BuLi, and crystals of the lithiumphosphanide [(SiMe₃)₂MeSi]₂SiClPLiHyp (3) could be obtained from THF, albeit in a quality not sufficient for X-ray diffraction. All attempts to achieve LiCl elimination and formation of the phosphasilene [(SiMe₃)₂MeSi]₂SiPSi(SiMe₃)₃ failed due to the unusual stability of the lithiumphosphanide. Prolongued refluxing in toluene (110 °C) only led to complete loss of coordinated THF, and ³¹P⁷Li spin spin coupling could be observed in the ³¹P NMR spectrum (¹J_PLi = 84 Hz).Reaction of potassium phosphanide [(SiMe₃)₃Si]SiMe₃PK with SiCl₄ led to the formation of [(SiMe₃)₃Si](SiMe₃)P(SiCl₃) (4), which could be successfully characterized with X-ray diffraction and multinuclear NMR spectroscopy. SiP bond lengths vary between 218 pm (SiCl₃) and 230 pm (hypersilyl). Despite these differences, ³¹P²⁹Si coupling constants are nearly identical (92.4 Hz and 85.5 Hz, respectively).     

Catalytic dehydrocoupling of thienyl/furyl-substituted carbosilanes – Synthesis and characterization of functional poly(hydrosilane)s [RMe2Si(CH2)xSiH]n, (R = 2-Th, 4-Me-2-Th, 2-Fu, 5-Me-2-Fu; x = 2 and 3)

The carbosilanes RMe₂Si(CH₂)_xSiH₃, [R = 2-Th (1a, 2a), 4-Me-2-Th (3a, 4a), 2-Fu (5a, 6a), 5-Me-2-Fu (7a, 8a); x = 2 and 3], with primary SiH₃ end groups undergo a facile dehydropolymerization under ambient conditions (50 °C, 48 h) in presence of Cp₂TiCl₂/2.2 n-BuLi catalyst to afford the corresponding poly(hydrosilane)s 1–8 bearing carbosilyl side chains appended with thienyl/furyl groups. These have been characterized by GPC, IR, multinuclear (¹H, ¹³C{¹H}, ²⁹Si{¹H}) NMR, UV and PL spectral studies.     

Reactions of a hydrido(hydrosilylene)tungsten complex with oxiranes

Reactivity of a hydrido(hydrosilylene)tungsten complex, Cp¹(CO)₂(H)WSi(H)[C(SiMe₃)₃] (1), toward oxiranes was investigated. Treatment of 1 with racemic mono-substituted oxiranes with a substituent R (R = Ph, vinyl, ^tBu, or ⁿBu) at room temperature produced dihydrido(vinyloxysilyl)tungsten complexes, (E)- and/or (Z)-Cp¹(CO)₂(H)₂W{Si(H)(OCHCHR)[C(SiMe₃)₃]} [(E/Z)-2: R = Ph, (E)-3: R = vinyl, (E)-4: R = ^tBu, (E/Z)-5: R = ⁿBu] in high yields via regioselective ring-opening of oxiranes. When the substituent R on oxirane was relatively large, (E)-isomers (2, 3, and 4) were obtained predominantly (87–97%), while the substituent was a relatively small ⁿBu group, an approximately 1:1 mixture of (E)- and (Z)-isomers [(E/Z)-5] was obtained. Reaction of 1 with 2,2-dimethyloxirane afforded the corresponding complex, Cp¹(CO)₂(H)₂W{Si(H)(OCHCMe₂)[C(SiMe₃)₃]} (6), quantitatively. A reaction mechanism is also discussed.     

Synthesis,structure, and property of a triruthenium cluster having a μ-alkyl ligand: Transformation of a μ3(⊥)-alkyne ligand into a μ-alkyl ligand via a μ3-vinylidene complex

A triruthenium μ-alkyl complex, (Cp¹Ru)₃(μ-η²-HCHCH₂R)(μ-CO)₂(μ₃- CO) (2a, R = Ph; 2b, R = ^tBu, Cp¹ = η⁵-C₅Me₅), which contains a two-electron and three-center interaction among Ru, C, and H atoms, has been synthesized by the reaction of a perpendicularly coordinated 1-alkyne complex, {Cp¹Ru(μ-H)}₃(μ₃-η²:η²(⊥)-RCCH) (1a; R = Ph, 1b; R = ^tBu), with carbon monoxide. A diffraction study for 2b clearly represented the bridging neohexyl group on one Ru–Ru edge. This μ-alkyl group exhibited dynamic behavior resulting in site-exchange of the α-hydrogen atoms between the terminal and bridging positions, which was synchronized with the migration of the μ-alkyl groups between the two ruthenium atoms. The agostic C–H bond was readily cleaved upon pyrolysis. Whereas the μ-phenethylidene intermediate resulting from the σ-C–H bond cleavage has never been observed, a μ₃-phenethylidyne complex, {Cp¹Ru(μ-CO)}₃(μ₃-CCH₂Ph) (7a), and a μ₃-methylidyne complex, {Cp¹Ru(μ-CO)}₃(μ₃-CH) (8), were obtained by the successive C–H/C–H and C–H/C–C bond cleavages at the μ-alkyl moiety, respectively.     

Hybrid inorganic–organic frameworks containing magnesium: Synthesis and structures of magnesium squarate,diglycolate, and glutarate,and potassium magnesium cyclobutanetetracarboxylate

Four new magnesium containing metal–organic hybrid compounds have been synthesized in an effort to prepare low-density materials for hydrogen storage. The compounds were prepared hydrothermally and characterized using single crystal X-ray diffraction. Three of these compounds are analogs of known transition metal structures with squarate (I, Pn-3n, a = 16.276(5) Å), diglycolate (II, P2₁2₁2₁, a = 6.860(1) Å, b = 9.993(1) Å, c = 10.884(1) Å, R₁ = 0.0341), and glutarate (III, R-3, a = 10.744(2) Å, c = 28.677(5) Å, R₁ = 0.0554) ligands; the fourth is a novel structure using cyclobutanetetracarboxylate (IV, Pccn, a = 9.382(1) Å, b = 14.410(2) Å, c = 8.725(1) Å, R₁ = 0.0465) which contains potassium as well as magnesium cations.     

Reaction of isocyanides with iminophosphorane-based carbene ligands: Synthesis of unprecedented ketenimine–ruthenium complexes

The RuC bond of the bis(iminophosphorano)methandiide-based ruthenium(II) carbene complexes [Ru(η⁶-p-cymene)(κ²-C,N-C[P{NP(O)(OR)₂}Ph₂]₂)] (R = Et (1), Ph (2)) undergoes a C–C coupling process with isocyanides to afford ketenimine derivatives [Ru(η⁶-p-cymene)(κ³-C,C,N-C(CNR′)[P{NP(O)(OR)₂}Ph₂]₂)] (R = Et, R′ = Bz (3a), 2,6-C₆H₃Me₂ (3b), Cy (3c); R = Ph, R′ = Bz (4a), 2,6-C₆H₃Me₂ (4b), Cy (4c)). Compounds 3–4a–c represent the first examples of ketenimine–ruthenium complexes reported to date. Protonation of 3–4a with HBF₄ · Et₂O takes place selectively at the ketenimine nitrogen atom yielding the cationic derivatives [Ru(η⁶-p-cymene)(κ³-C,C,N-C(CNHBz)[P{NP(O)(OR)₂}Ph₂]₂)][BF₄] (R = Et (5a), Ph (6a)).     

Synthesis and characterization of organophosphine/phosphite stabilized N-silver(I) succinimide: crystal structure of [(Ph3P)3 · AgNC4H4O2]

Six organophosphine/phosphite stabilized N-silver(I) succinimide complexes of the type L_n · AgNC₄H₄O₂ (L = PPh₃; n = 1, 2a; n = 2, 2b; n = 3, 2c; L = P(OEt)₃; n = 1, 2d; n = 2, 2e; n = 3, 2f) have been prepared by reacting [AgNC₄H₄O₂], which can be synthesized from succinimide and excessive Ag₂O in boiling water, with triphenylphosphine or triethylphosphite in dichloromethane under a nitrogen atmosphere. These complexes were obtained in high yields and characterized by elemental analysis, ¹H, ¹³C{H} NMR, IR spectroscopy and thermal analysis (TG and DSC). The molecular structure of 2c has been determined by X-ray single crystal analysis, in which the silver atom is in a distorted tetrahedral geometry.     

Versatile Ru-based metathesis catalysts designed for both homogeneous and heterogeneous processes

The synthesis of new ruthenium-based catalysts applicable for both homogeneous and heterogeneous metathesis is described. Starting from the Hoveyda-Grubbs first generation (1) and the Hoveyda-Grubbs second generation (2) catalysts the homogeneous catalysts [RuCl((RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COO)(CH–o-O–iPr–C₆H₄)(SIMes)] (4: R = Et, R′ = H; 5: R = R′ = Me) (SIMes = 1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene) were prepared by substitution of one chloride ligand with trialkoxysilyl functionalized silver carboxylates (RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COOAg (3a: R = Et, R′ = H; 3b: R = R′ = Me). These homogeneous ruthenium-species are among a few known examples with mixed anionic ligands. Exchange of both chloride ligands afforded the catalysts [Ru((RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COO)(CH–o-O–iPr–C₆H₄)(SIMes)] (9: R = Et, R′ = H; 11: R = R′ = Me) and [Ru((RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COO)(CH–o-O–iPr–C₆H₄)(PCy₃)] (8: R = Et, R′ = H; 10: R = R′ = Me). The reactivity of the new complexes was tested in homogeneous ring-closing metathesis (RCM) of N,N-diallyl-p-toluenesulfonamide and TONs of up to 5000 were achieved. Heterogeneous catalysts were obtained by reaction of 4, 5 and 8–11 with silica gel (SG-60). The resultant supported catalysts 4a, 5a, 8a–11a showed reduced activity compared to their homogenous analogues, but rival the activity of similar heterogeneous systems.     

Cyclic (alkyl)(amino)carbene gold(I) complexes: A synthetic and structural investigation

A series of mono- and dicarbene gold(I) complexes of types Au(CAAC)(Cl) [CAAC = cyclic (alkyl)(amino)carbene] (1) and [Au(CAAC)₂]⁺[X]^? (X = Cl, AuCl₂) (2) have been prepared through reaction of AuCl(SMe₂) with free carbenes a–e, and structurally characterized by single X-ray diffraction studies (1a, 1b, 2d, 2e). In addition two new free cyclic (alkyl)(amino)carbenes (c and e) have been synthesized.     

Spontaneous resolution of a novel chiral coordination polymer through supramolecular interactions and solvent symmetry breaking

The spontaneous resolution reaction of racemic trans-2,3-dihydro-2,3-dipyridyl-benzo[e]indole 1 with Cd(ClO₄)₂·6H₂O in the presence of 2-butanol under solvothermal reaction conditions favors the formation of crystal 2 [P-Cd(R,R,-1)₂(ClO₄)₂], while a similar reaction in the presence of ethanol only favors the formation of crystal 3 [M-Cd(S,S,-1)₂(ClO₄)₂]. The crystal structural determination shows that both 2 and 3 crystallize in chiral enantiomorphous space groups (P6₁22 and P6₅22) and their structures are 1D infinite chain, and are just enantiomorphous pairs most like. The spontaneous resolution process displays estimated ee values of ca. +0.6 for 2-butanol and ca. −0.4 for ethanol. Enantiomerically pure (S,S)-trans-2,3-dihydro-2,3-dipyridyl-benzo[e]indole (S,S,-1) can be obtained through the decomposition of mechanically separated 3. Additionally (S,S,-1) also crystallizes in a chiral space group (P2₁). The CD (circular dichroism) spectra of both 2 and 3 in the solid state are also approximately enantiomorphous pairs. However, their fluorescent spectra in the solid state display a moderate difference in maximum emission peaks (Δλ = 19 nm). Crystal data for 2: C₄₄H₃₄Cl₂N₆O₈Cd, M = 958.07, hexagonal, P6₁22, a = 10.5488(5), c = 68.256(4) Å, α = γ = 90°, β = 120°, V = 6577.8(6) Å³, Z = 6, D_c = 1.451 mg m⁻³, R₁ = 0.0498, wR₂ = 0.1124, μ = 0.679 mm⁻¹, S = 0.623, Flack χ = −0.02(6). For space group P6₅22, R₁ = 0.0670, wR₂ = 0.1602, S = 0.725 with a Flack value of 1.03(7); Crystal data for 3, C₄₄H₃₄Cl₂N₆O₈Cd, M = 958.07, hexagonal, P6₅22, a = 10.5446(3), c = 68.265(3) Å, V = 6573.3(4) Å³, Z = 6, D_c = 1.452 mg m⁻³, R₁ = 0.0444,wR₂ = 0.1002, μ = 0.679 mm⁻¹, S = 0.558, Flack χ = 0.01(5). For space group P6₁22, R₁ = 0.0501, wR₂ = 0.1178, S = 0.599 with a Flack value of 1.00(5). The low Flack parameter indicates that the absolute configurations of 2 and 3 are stated; Crystal data for (S,S)-1, C₂₂H₁₇N₂, M = 323.39, orthorhombic, P2₁2₁2₁, a = 9.2598(7), b = 9.4617(8), c = 19.1452(16) Å, V = 1677.4(2) Å³, Z = 4, D_c = 1.281 mg m⁻³, R₁ = 0.0417, wR₂ = 0.1191, T = 293 K, μ = 0.077 mm⁻¹, S = 0.862.     

Iridium aminyl radical complexes as catalysts for the catalytic dehydrogenation of primary hydroxyl functions in natural products

The cationic tetra-coordinated 16 electron complex [Ir(trop₂dach)]⁺OTf⁻ (1) where (OTf⁻ = CF₃SO₃⁻) and the neutral amine amido complex [Ir(trop₂dach-1H)] (2) were isolated and structurally characterized. The NH function in 1 is easily deprotonated (pK_a^DMSO = 10.5) to yield the amino amido complex [Ir(trop₂dach-1H)] (2), which is deprotonated at pK_a^DMSO = 19.6 to the anionic di(amido) iridate [Ir(trop₂dach-2H)]⁻ (3); [(R,R)-top₂dach stands for the tetrachelating diamino diolefin ligand (R,R)-N,N′-bis(5H-dibenzo[a,d]cyclohepten-5-yl)-1,2-diaminocyclohexane; (R,R)-top₂dach-1H and (R,R)-top₂dach-2H indicate the mono and double deprotonated form]. Complex 3 is easily oxidized by 1,4-benzoquinone (BQ) to the neutral iridium aminyl radical complex [Ir(trop₂dach-2H)] (4). In combination with BQ as hydrogen acceptor and catalytic amounts of base, 4 serves as catalyst in the highly efficient dehydrogenation of functionalized primary alcohols to the corresponding aldehydes, RCH₂OH + BQ → RCHO + H₂BQ (H₂BQ = catechol). Alcohols like geraniol and retinol are rapidly converted to geranial and retinal, while the conversion of sterically hindered alcohols like lavandulol is slower and the primary product, lavandulal, isomerizes to isolavandulal in a classical base-catalyzed reaction.     

High-throughput investigation and characterization of strontium-phosphonatoethanesulfonates

Using the polyfunctional ligand 2-phosphonethanesulfonic acid (H₃L) a high-throughput (HT) study was started for the systematic investigation of the system SrCl₂/H₃L/NaOH/H₂O. The HT experiment comprising 48 individual reactions were performed to systematically investigate the influence of pH of the starting mixture as well as the molar ratio Sr²⁺:H₃L. Two new compounds SrH(O₃P–C₂H₄–SO₃) (1) and Sr₃(O₃P–C₂H₄–SO₃)₂(H₂O)₂ (2) were obtained and structurally characterized by single-crystal X-ray diffraction. The reaction products synthesized under hydrothermal conditions always contain traces of SrSO₄, which are due to the decomposition of small amounts of the ligand. While compound 2 could only be obtained under hydrothermal conditions, the synthesis of 1 could be accomplished under milder reaction conditions and a reaction scale-up could be performed. Compound 1 crystallizes in a monoclinic system with space group C2/c (no. 15), a = 534.73(11) pm, b = 1648.7(3) pm, c = 825.43(17) pm, β = 105.34(3)°, V = 701.8(2)–10⁶ pm³, Z = 4, R1 = 0.0268, and wR₂ = 0.0642 for I > 2σ(I). Compound 2 crystallizes in a triclinic system with space group P-1 (no. 2), a = 700.97(14) pm, b = 1008.5(2) pm, c = 1274.8(3) pm, α = 97.63(3)°, β = 92.03(3)°, γ = 92.03(3)°, V = 843.7(3)–10⁶ pm³, Z = 2, R1 = 0.0360, and wR₂ = 0.0896 for I > 2σ(I). In the structure of compound 1 the phosphorous and sulfur atoms cannot be distinguished due to identical crystallographic positions. Thus, an averaged structure was obtained which is built up by edge-sharing SrO₈ polyhedra that form infinite M–O–M chains. Compound 2 contains corner-, edge-, and face-sharing SrO₈ polyhedra which form inorganic M–O–M layers. These M–O–M chains (1) and layers (2) are connected to a three-dimensional network by the –CH₂CH₂– group of the ligand, respectively. Additional characterization by thermogravimetric analysis and IR-spectroscopy for compound 1 is also presented.     

Dinuclear ruthenium(I) complexes of the type [Ru2(CO)4L2] with carboxylate or 2-pyridonate ligands: Evaluation as catalysts for olefin cyclopropanation with diazoacetates

Dinuclear ruthenium(I,I) carboxylate complexes [Ru₂(CO)₄(μ-OOCR)₂]_n (R = CH₃ (1a), C₃H₇ (1b), H (1c), CF₃ (1d)) and 2-pyridonate complex [Ru₂(CO)₄(μ-2-pyridonate)₂]_n (3) catalyze efficiently the cyclopropanation of alkenes with methyl diazoacetate. High yields are obtained with terminal nucleophilic alkenes (styrene, ethyl vinyl ether, α-methylstyrene), medium yields with 1-hexene, cyclohexene, 4,5-dihydrofuran and 2-methyl-2-butene. The E-selectivity of the cyclopropanes obtained from the monosubstituted alkenes and the cycloalkenes decreases in the order 1b > 1a > 1d > 1c. The cyclopropanation of 2-methyl-2-butene is highly syn-selective. Several complexes of the type [Ru₂(CO)₄(μ-L¹)₂]₂ (4) and (5), [Ru₂(CO)₄(μ-L¹)₂L²] (L² = CH₃OH, PPh₃) (6)–(9) and [Ru₂(CO)₄(CH₃CN)₂(μ-L¹)₂] (10) and (11), where L¹ is a 6-chloro- or 6-bromo-2-pyridonate ligand, are also efficient catalysts. Compared with catalyst 3, a halogen substituent at the pyridonate ligand affects the diastereoselectivity of cyclopropanation only slightly.     

Reactivity of intramolecularly coordinated aluminum compounds to R3EOH (E = Sn,Si). Remarkable migration of N,C,N and O,C,O pincer ligands

The reaction of organoaluminum compounds containing O,C,O or N,C,N chelating (so called pincer) ligands [2,6-(YCH₂)₂C₆H₃]AlⁱBu₂ (Y = MeO 1, ^tBuO 2, Me₂N 3) with R₃SnOH (R = Ph or Me) gives tetraorganotin complexes [2,6-(YCH₂)₂C₆H₃]SnR₃ (Y = MeO, R = Ph 4, Y = MeO, R = Me 5; Y = ^tBuO, R = Ph 6, Y = ^tBuO, R = Me 7; Y = Me₂N, R = Ph 8, Y = Me₂N, R = Me 9) as the result of migration of O,C,O or N,C,N pincer ligands from aluminum to tin atom. Reaction of 1 and 2 with (ⁿBu₃Sn)₂O proceeded in similar fashion resulting in 10 and 11 ([2,6-(YCH₂)₂C₆H₃]SnⁿBu₃, Y = MeO 10; Y = ^tBuO 11) in mixture with ⁿBu₃SnⁱBu. The reaction 1 and 3 with 2 equiv. of Ph₃SiOH followed another reaction path and ([2,6-(YCH₂)₂C₆H₃]Al(OSiPh₃)₂, Y = MeO 12, Me₂N 13) were observed as the products of alkane elimination. The organotin derivatives 4–11 were characterized by the help of elemental analysis, ESI-MS technique, ¹H, ¹³C, ¹¹⁹Sn NMR spectroscopy and in the case 6 and 8 by single crystal X-ray diffraction (XRD). Compounds 12 and 13 were identified using elemental analysis,¹H, ¹³C, ²⁹Si NMR and IR spectroscopy.     

Synthesis and properties of alkaline metal complexes with new overcrowded β-diketiminato ligands

Enaminoimines TbtNHC(Me)CHC(Me)NAr (5, Tbt = 2,4,6-[CH(SiMe₃)₂]₃C₆H₂) bearing a Tbt group were synthesized by the two steps condensation of acetylacetone with bulky amines. Enaminoimines 5 were treated with n-BuLi to give the corresponding lithium β-diketiminates, [Li{TbtNHC(Me)CHC(Me)NAr}] (1). The X-ray structural analysis of [Li{TbtNC(Me)CHC(Me)NMes}] (1c, Mes = mesityl) revealed that it is a monomeric, solvent-free lithium β-diketiminate. The equilibrium between free 1c plus THF and THF-coordinated (1c · thf) was investigated in detail by the determination of the association constant (K_a) in C₆D₆ at 293 K and the Job’s plot. The heavier alkali metal complexes, sodium and potassium β-diketiminates (6c–9c), were prepared by the two routes. THF-coordinated [M{TbtNC(Me)CHC(Me)NMes}(thf)] (6c: M = Na. 7c: M = K) were prepared by the reaction of 5c (Ar = Mes) with MH (M = Na, K). Solvent-free [M{TbtNC(Me)CHC(Me)NMes}] (8c: M = Na. 9c: M = K) were prepared by the reaction of 1c with t-BuOM (M = Na, K).     

Two fumarato-bridged Co(II) coordination polymers: syntheses,crystal structures and properties of Co(H2O)4L and [Co3(H2O)4(OH)2L2]·2H2O with H2LHOOCCHCHCOOH

Two fumarato-bridged Co(II) coordination polymers Co(H₂O)₄L 1 and [Co₃(H₂O)₄(OH)₂L₂]·2H₂O 2 with H₂LHOOCCH CHCOOH were prepared. Complex 1 consists of polymeric chains _∞¹[Co(H₂O)₄(C₄H₂O₄)_2/2], which result from octahedrally coordinated Co atoms bridged by bis-monodentate fumarate anions and are assembled by interchain hydrogen bonds. Within 2, the edge-shared Co₂O₁₀ bi-octahedra are connected to the CoO₆ octahedra to form 1D cobalt oxide chains and 3D open framework generated from the chains inter-linked by bis-bidentate fumarate anions displays rhombic tunnels, which are filled with the lattice H₂O molecules. Thermal and magnetic behaviors of both the title coordination polymers are discussed. Crystal data: (1) monoclinic, P2₁/c, Z=4, a=7.493(1) Å, b=14.377(1) Å, c=7.708(1) Å, β=99.54(1)°, V=818.9(2) Å³, R₁=0.0304, and wR₂=0.0669 for 1487 observed reflections (I⩾2σ(I)) out of 1877 unique reflections; (2) monoclinic, P2₁/c, Z=2, a=6.618(1) Å, b=8.172(2) Å, c=15.578(3) Å, β=96.30(3)°, V=837.4(3) Å³, R₁=0.0360 and wR₂=0.0663 for 1442 observed reflections (I⩾2σ(I)) out of 1927 unique reflections.     

Copper and cadmium phosphonates based on 2-quinolinephosphonate

Hydrothermal reactions of 2-quinolinephosphonic acid (1) and CuSO₄ or CdSO₄ result in two new compounds with formula Cu(2-C₉H₆NPO₃) (2) and Cd(2-C₉H₆NPO₃)(H₂O) (3). Compound 2 has a layer structure in which dimers of edge-sharing {CuO₄N} square-pyramids are linked by {CPO₃} tetrahedra through corner sharing. Compound 3 shows a new type of layer structure where chains of corner sharing {CdO₅N} octahedra are connected by {CPO₃} tetrahedra into an inorganic layer. The quinoline groups fill in the inter-layer spaces in both cases. Crystal data for 1: monoclinic, space group P2₁/c, a = 10.270(2) Å, b = 13.566(3) Å, c = 6.9818(16) Å, β = 101.916(4)°, V = 951.8(4) Å³, Z = 4. For 2: monoclinic, space group P2₁/c, a = 13.976(3) Å, b = 7.9398(18) Å, c = 7.8687(18) Å, β = 101.150(5)°, V = 856.7(3) Å³, Z = 4. For 3: monoclinic, space group P2₁/c, a = 17.164(4) Å, b = 5.4870(12) Å, c = 10.850(2) Å, β = 101.557(4)°, V = 1001.1(4) Å³, Z = 4. The magnetic measurement on 2 reveals a dominant antiferromagnetic exchange coupling between the Cu(II) centers. A quasi-reversible electrochemical reaction is observed for complex 2 immobilized on the surface of GC electrode, corresponding to the redox couple Cu²⁺/Cu⁺. The fluorescent properties of 1–3 are also investigated.     

Synthesis and characterization of novel intramolecularly O,C,O-coordinated heteroleptic organostannylenes and their tungstenpentacarbonyl complexes

The syntheses are reported of the novel heteroleptic organostannylenes [2,6-(ROCH₂)₂C₆H₃]SnCl (1, R = Me; 2, R = t-Bu) and of their tungstenpentacarbonyl complexes [2,6-(ROCH₂)₂C₆H₃](X)SnW(CO)₅ (3, X = Cl, R = Me; 4, X = Cl, R = t-Bu; 5, X = H, R = Me). The compounds were characterized by means of elemental analyses, ¹H, ¹³C, ¹¹⁹Sn NMR spectroscopies, electrospray mass spectrometry and in case of 3 and 4 also by single crystal X-ray diffraction analysis. For the two latter compounds the substituents bound at the ether oxygen atom control the strength of intramolecular O → Sn coordination. Thus, the O–Sn distances amount to 2.391(5)/2.389(5) (3) and 2.464(3)/2.513(3) Å (4).