Determination of the lipophilicity of some anti-hypoxia drugs: Comparison of TLC and HPLC methods

Summary The lipophilicity of 14 anti-hypoxia drugs has been determined by reversed phase thin-layer (RPTLC) and reversed phase high performance liquid chromatography (RPHPLC) in eluent systems containing different concentrations of acetonitrile and potassium dihydrogen phosphate. There was significant correlation between lipophilicity and the specific hydrophobic surface area of the drugs in RPTLC, indicating that the drugs behave as an homologous series of compounds. In RPTLC the concentration of buffer has a negligible effect on the retention of the drugs whereas in RPHPLC the buffer concentration influenced the retention. This discrepancy can be explained by the lower sensitivity of RPTLC. There was strong correlation between lipophilicity values determined by both methods, proving that both are suitable for the determination of molecular lipophilicity.     

Support matrix effects in the reversed-phase thin-layer chromatography of some peptides.

The retentions of 28 peptides in reversed-phase thin-layer chromatography (RPTLC) were determined on cellulose and on impregnated cellulose and alumina layers with 1-propanol as the organic component of the mobile phase. Each peptide showed a support matrix effect: their RM values first decreased to a minimum, then increased with increasing 1-propanol concentration. On cellulose layers only the increasing phase was observed. The retention behaviour of peptides was adequately described with a quadratic or linear function, but the slope value of the linear function had a positive value. The results demonstrate that the support matrix effect can be observed on non-silica supports and it may occur in reversed-phase chromatography in the case of polar solutes and supports with free adsorptive centres on their surfaces. Both the intercept and slope values of the function are needed to describe the lipophilicity of peptides, but the correlation is not strong enough for the determination of the lipophilicity of peptides by RPTLC. Principal component analysis showed that the peptides form distinct clusters on the basis of their retention characteristics: peptides containing a basic amino acid, peptides with a ring structure in the amino acid side-chain and peptides containing uncharged amino acids.     

RPTLC Determination of log P of Structurally Diverse Neutral Compounds

JPC – Journal of Planar Chromatography – Modern TLC - A validated reversed-phase thin-layer chromatographic (RPTLC) method is proposed for parallel estimation of the lipophilicity of...     

Lipophilicity of Metallic Complexes of 4-Methoxyphenyl - 4' - Chlorobenzoylhydrazine as Estimated from Principal Component Analysis of thin Layer Chromatographic Retention Data

ABSTRACT

The relative lipophilicity of ten metallic complexes of 4-methoxyphenyl-4'-chlorobenzoylhydrazine with Cu²⁺, Co²⁺, Mn²⁺, Ni²⁺, Pd²⁺, Fe³⁺, Cr³⁺, La³⁺, Ce⁴⁺ and UO₂ ²⁺ with potentially anti-inflammatory properties have been determined by reversed-phase thin-layer chromatography using C₁₈ plates and water-methanol mixtures as eluents. The R_F values of each compound increased linearly with increasing concentration of methanol in the eluent. Principal component analysis allowed a more rational and objective estimation and comparison of lipophilicity determined by RPTLC. Scatterplots of the scores onto a plane described by the first two components showed clustering of the complexes according to the nature of the central cation, obtaining in this way a "congeneric lipophilicity chart". Generally, the presence of cation increases the lipophilicity expressed as scores along the first principal component, practically in the same way. This means that the lipophilic behavior of metallic complexes depends firstly of the structure of ligand. However, the most lipophilic effect was observed in the case of Cu²⁺, Pd²⁺, La³⁺ and Cr³⁺.     

Determination of the lipophilicity of some aniline derivatives by reversed-phase thin-layer chromatography. The effect of the organic phase in the eluent

Summary The lipophilicity of aniline and 36 ring-substituted aniline derivatives was determined by reversed-phase thin-layer chromatography using methanol, acetone and acetonitrile as the organic phase. The R_M value of each compound linearly decreased with increasing concentration of the organic solvent, Acetonitrile showed the highest and methanol the lowest solvent strength, however, the difference between the solvent strength of methanol and acetone was negligible. The site of the substitution considerably influenced the lipophilicity particularly in the case of –NO₂ groups. Good correlation was found between the R_M value extrapolated to zero organic phase concentration and the partition coefficient between n-octanol:water. The change in the R_M value caused by a 1% increase of the organic phase concentration also correlated with the partition coefficient, however, it was of secondary importance. The lipophilicity parameters determined by reversed-phase thin-layer chromatography correlated to a lesser extent with the calculated lipophilicity values of aniline derivatives.     

Lipophilicity analysis of newly synthetized quinobenzothiazines by use of TLC

Lipophilicity is a very important property of chemical compound taking into consideration in drugs design. Relationships between biological activity, among others lipophilicity, and chemical structure (QSAR) of the compound are very often used by researches. Especially important is the kind of substituents connected to the basic structural fragment and how it changes the lipophilicity of the compound. The aim of this study was to determine the parameters of lipophilicity of quinobenzothiazine derivatives using reversed phase - thin-layer chromatography (RP-TLC), which would enable one to determine the structure–activity relationship. The objective of our work is a series of 15 newly synthetized quinobenzothiazines. They were analyzed by thin-layer chromatography (TLC) with the use of two different mobile phases consisting of methanol or acetone as organic modifiers. For all compounds investigated, the values of lipophilicity obtained from computational method were also determined. Cluster analysis was carried out too for all data of lipophilicity obtained. Low correlation was found between values of experimental lipophilicity and lipophilicity from computational methods for newly synthetized compounds.     

High-throughput evaluation of lipophilicity and acidity by new gradient HPLC methods

There is a need for fast testing of drug candidates for properties of pharmacokinetics and pharmacodynamics importance, in particular lipophilicity and acidity. These two parameters can conveniently be estimated by gradient reversed-phase HPLC. Appropriate conventional organic solvent gradient and the new pH gradient HPLC procedures are presented. The chromatographic parameter of lipophilicity, log kw, can be determined from two organic solvent gradient runs instead of 6-8 runs necessary in the standard isocratic (polycratic) approach. The newly introduced pH gradient reversed-phase HPLC consists in a programmed increase during the chromatographic run of the eluting power of the mobile phase with regards to ionizable analytes. The eluting strength of the mobile phase increases due to its increasing (in case of acidic analytes) or decreasing (basic analytes) pH, whereas the content of organic modifier remains constant. It has been theoretically and experimentally demonstrated that the pKa and log kw values can be evaluated based on retention data from a pH gradient run, combined with appropriate data from two organic solvent gradient runs. The gradient HPLC-derived log kw parameters correlate well with analogous parameters determined isocratically as well as with reference lipophilicity parameter log P (logarithm of n-octanol/water partition coefficient). Also, the HPLC-derived pKa parameters correlate to the literature pKa values (w(w)pKa), conventionally determined by titrations in water. The approach described allows rapid and high-throughput assessment of log kw and pKa for large series of drugs candidates, also when the analytes are available in a form of mixture, e.g. produced by combinatorial synthesis.     

Evaluation of N-Substituted 2,4-Dihydroxyphenylthioamide Fungicide Lipophilicity Using the Chromatographic Techniques HPLC and HPTLC

2,4-Dihydroxyphenylthioamide derivatives modified on the N-aryl ring have substantial fungicidal activity. To determine their quantitative structure–activity relationships their lipophilicity was determined by use of the chromatographic methods column liquid chromatography and thin-layer chromatography. Methanol–water systems were used as mobile phases and the linear dependences of retention (R_M and log k) on volume fraction of organic modifier, φ, were determined. This enabled precise determination of lipophilicity (R_Mw and log k_w) by extrapolation. Correlations were found between quantities characterizing the lipophilicity of the compounds. Deviations enabled discovery of compound structural features which increase or reduce lipophilicity. When these data were correlated with biological activity against the phytopathogenic fungi Alternaria alternata and Botrytis cinerea parabolic dependences were obtained.     

Affinity partitioning for membrane purification exploiting the biotin-NeutrAvidin interaction. Model study of mixed liposomes and membranes

The linear-solvent strength (LSS) model of gradient elution has been applied to estimate parameters of lipophilicity and acidity of a series of drugs and model chemicals. Apparent pKa values and log kw values for individual analytes were determined in 2-3 gradient runs. The first experiment (or first two experiments) uses a wide-range organic modifier gradient with pH chosen for suppressed ionization of the analyte. The result of this experiment allows an estimate of contents of organic modifier of the mobile phase (%B) providing the required retention coefficient, k, for the non-ionized analyte. The following experiment is carried out with the latter %B and a pH-gradient of the aqueous component of the eluent that is sufficient to overlap the possible pKa-value of the analyte. The initial pH of the buffer used to make the mobile phase is selected to insure that the analyte is in non-ionized form. The resulting retention time allows an estimate of PKa in a solvent of the selected %B. At the same time, estimates of log kw can also be obtained. The log kw parameter obtained from gradient HPLC by the approach proposed correlated well with the corresponding value obtained by standard procedure of extrapolation of retention data determined in a series of isocratic measurements. Correlation between log kw and the reference parameter of lipophilicity, log P, was very good for a series of test analytes and satisfactory for a structurally diverse series of drugs. The approach supported with specific detection procedures can be recommended for fast screening of lipophilicity of individual components of complex mixtures like those produced by combinatorial chemistry. The values of pKa obtained in a study were found to correlate with the literature pKa data determined in water for a set of aniline derivatives studied. In case of a series of drugs the correlation was less than moderate if the general procedure of pKa determination was applied.     

Determination of lipophilicity for antitumor acridinone derivatives supported by gradient high-performance liquid chromatography method

The lipophilicity values of selected acridinone (imidazoacridinone and triazoloacridinone) derivatives were measured by gradient reversed-phase high-performance liquid chromatography (RP-HPLC) using a C18 stationary phase with a water/acetonitrile mixture as a mobile phase. The retention times obtained served as input data and appropriate log k_w values (i.e., the retention factor log k_w extrapolated to 0% organic modifier) as an alternative to log P were calculated using the DryLab program. The relationships between the lipophilicity (log k_w) and the chemical structure of the studied compounds, as well as correlation between experimentally determined lipophilicities (log k_w) and log P data calculated using some commonly available software, are discussed.     

Quantitative Structure-Retention Relationship and 3D Molecular Modeling Studies of the Unusual Chromatographic Behavior of Triphenylmethane Derivatives in RPTLC Systems

JPC – Journal of Planar Chromatography – Modern TLC - Dual retention behavior is observed for triphenylmethane (TPM) derivatives in RPTLC on silica gel plates when the composition of...     

Influence of pH and organic modifiers on the dissociation constants of selected drugs using reversed‐phase thin‐layer chromatography: Comparison with other techniques and computational tools

Knowledge of the acid–base dissociation constants of drugs is the key to understanding their biopharmaceutical characteristics. In the present work, the effect of pH and organic modifiers (acetonitrile and methanol) was investigated in the determination of dissociation constants (pK_a) of nine representative drugs (atenolol, betahistine, clarithromycin, deferiprone, diclofenac, ibuprofen, metoprolol, naproxen and propranolol) using reversed‐phase thin‐layer chromatography. Mobile phase consisting of various buffers and methanol–acetonitrile (10, 20, 30, 40, 50 and 60%, v/v) was used to evaluate the retention pattern on reversed‐phase plates. Compared with methanol, acetonitrile gave better results for the experimentally determined pK_a values by extrapolation to zero organic modifier volume fractions. To assess the effectiveness of the developed method the results were correlated using principal component analysis and hierarchical cluster analysis. The calculated values of the aqueous dissociation constant were compared with those reported previously using potentiometry and capillary electrophoresis and also with different computational platforms like ACD/Lab, ChemAxon and Jchem calculator. The results obtained by the RPTLC method were in good agreement with potentiometric methods for pK_a determination.     

Lipophilicity determination of some potential photosystem II inhibitors on reversed-phase high-performance thin-layer chromatography

The retention characteristics of 25 2-cyano-3-methylthio-3-substituted amine-acrylates are determined using reversed-phase thin-layer chromatography (RP-TLC) with methanol-water mixtures as eluents. The relationship between Rm values and partition coefficients (C log P) are established. The Rm values decrease linearly with increasing methanol concentration in the eluent. The Rm values extrapolated to zero organic modifier concentration (Rm0) in the eluent are highly related to C log P. The Rm0 value can be used to evaluate the lipophilicity of this kind of compound.     

Chromatographic descriptors in QSAR study of barbiturates

Barbiturate derivatives were evaluated for their parameters of biological activity by applying linear regression and two multivariate methods (Cluster analysis and Principal component analysis). The lipophilicity of the studied barbiturates was determined on the modified carriers C18 in mixtures of water and four organic modifiers separately (methanol, n-propanol, acetone and tetrahydrofuran) by performing reversed phase thin layer chromatography and by applying relevant software packages. Chromatographic and computational lipophilicity of the examined barbiturates was correlated with the selected pharmacokinetic and toxicological predictors and good relationships were obtained. More concrete results were obtained by multivariate methods which showed that the polarity of the substituent has the greatest influence, and its electronic effects to a lesser extent on the tested parameters of the barbiturate derivatives. Results obtained by multivariate methods also suggest that the chromatographic retention constant, R_M⁰, shows a greater resemblance to the parameters of lipophilicity. The chromatographic parameter m, exhibits better agreement with the toxicity parameters.     

Lipophilicity determination of some photosynthetic pigments by reversed-phase thin-layer chromatography. The effect of support and the organic phase in the eluent

Summary The lipophilicity of some photosynthetic pigments was determined by reversed-phase thin-layer chromatography using silica, alumina, cellulose, polyamid and diatomaceous earth as supports and acetone and ethanol as organic mobile phase. The R_M value of each compound linearly decreased with increasing concentration of the organic modifier. The supports exerted high impact on the separation: no acceptable separation was achieved on cellulose, polyamid, alumina and diatomaceous earth supports while silica supports produced the best separation. The retention of photosynthetic pigments depended on the origin of silica and on the type of organic mobile phase.     

HPTLC and magnetochromatography of new complexes of carboxylates with transition metals or rare earth elements and their ligands – study of lipophilicity

Nineteen new complexes of carboxylates with transition and rare elements as central ions and their ligands were characterized by chromatographic analyses. The parameter of relative lipophilicity (R _M0) of the tested compounds was determined experimentally by the reversed‐phase high‐performance thin layer chromatography method with mixtures of various organic modifiers (acetonitrile, acetone, dioxane) and water as a mobile phase. The extrapolated R _M0 values were compared with the logP values calculated from the molecular structures of tested solutes. Similarities between the lipophilicity indices were analysed by principal component analysis and linear regression. Thin‐layer chromatography combined with a magnetic field has been proposed as a complementary method for determination of lipophilicity of the investigated compounds. The chromatograms in the field and outside it were developed simultaneously in two identical chromatographic chambers. One of them was placed in the external magnetic field of 0.4 T inductivity. We proved that chelation causes a drastic change in compound lipophilicity, but all complexes did not exhibit enhanced activity as compared with the parent ligand. Also in the magnetic field the retention of some complexes changed, which means that the presence of the field influences the physicochemical properties of the compounds and their interactions with the stationary phase.     

Efficient phase transfer of pertechnetate with bicyclic guanidinium compounds

Extraction of pertechnetate with bicyclic guanidinium compounds has been studied in the KTcO₄-buffer-H₂O/ligand-trichloromethane system. Extraction data of guanidinium ligands have been compared with trialkylmethylammonium (Aliquat 336), tetraphenylphosphonium and tetraphenylarsonium chloride. The lipophilicity of extractants investigated was determined by RP-HPLC. The efficiency of pertechnetate extraction correlates with the lipophilicity of the guanidinium compounds. 1:1 complex formation in the organic phase was observed. The influence of hydroxide, chloride and bicarbonate on the pertechnetate extraction has been investigated. Pertechnetate is extracted with great preference over OH⁻, Cl⁻ and HCO₃ ⁻, ions.     

Determination of lipophilicity of γ‐butyrolactone derivatives with anticonvulsant and analgesic activity using micellar electrokinetic chromatography

The lipophilicity of a library of 30 derivatives of dihydrofuran‐2(3H)‐one (γ‐butyrolactone) was determined by MEKC. Calibration curve prepared for ten reference drugs enabled to calculate partition coefficient (log P) for novel compounds. The results of MEKC analysis were compared with lipophilicity coefficients determined by RP‐TLC (R_M0) and computational (Mlog P, Clog P) methods. Good correlation was observed between the results obtained by both experimental methods: the MEKC parameters log k and relative lipophilicity R_MO. The relationship between determined log P values and results of the computational prediction was weaker. Analysis of the relationship between lipophilicity and anticonvulsant activity showed statistically significant differences between mean values of log P coefficients for group of active (2.18) and inactive (1.51) compounds in the maximal electroshock test.     

The effect of analyte lipophilicity on the resolution of α-amino acids on a HPLC chiral stationary phase based on crown ether

The effect of analyte lipophilicity on the resolution of α-amino acids on a chiral stationary phase based on chiral crown ether has been examined by the chromatographic resolution trends for the resolution of a homologous series of five α-amino acids with an alkyl group of different length at the chiral center. The retention factors (k₁ and k₂) for the two enantiomers and the separation factors (α) were found to depend on the lipophilicity of the α-amino acid. In general, the retention factors increased as the organic modifier content in the mobile phase increased, the degree of the enhancement of retention factors being dependent on the analyte lipophilicity. The separation factors also increased as the analyte lipophilicity and the organic modifier content in the mobile phase increased. Possible rationales for these behaviors have been proposed.