A definitive example of a geometric "entatic state" effect: electron-transfer kinetics for a copper(II/I) complex involving A quinquedentate macrocyclic trithiaether-bipyridine ligand

The quinquedentate macrocyclic ligand cyclo-6,6'-[1,9-(2,5,8-trithianonane)]-2,2'-bipyridine ([15]aneS3bpy = L), containing two pyridyl nitrogens and three thiaether sulfurs as donor atoms, has been synthesized and complexed with copper. The CuII/IL redox potential, the stabilities of the oxidized and reduced complex, and the oxidation and reduction electron-transfer kinetics of the complex reacting with a series of six counter reagents have been studied in acetonitrile at 25 degrees C, mu = 0.10 M (NaClO4). The Marcus cross relationship has been applied to the rate constants obtained for the reactions with each of the six counter reagents to permit the evaluation of the electron self-exchange rate constant, k11. The latter value has also been determined independently from NMR line-broadening experiments. The cumulative data are consistent with a value of k11 = 1 x 10(5) M(-1) s(-1), ranking this among the fastest-reacting CuII/I systems, on a par with the blue copper proteins known as cupredoxins. The resolved crystal structures show that the geometry of the CuIIL and CuIL complexes are nearly identical, both exhibiting a five-coordinate square pyramidal geometry with the central sulfur donor atom occupying the apical site. The most notable geometric difference is a puckering of an ethylene bridge between two sulfur donor atoms in the CuIL complex. Theoretical calculations suggest that the reorganizational energy is relatively small, with the transition-state geometry more closely approximating the geometry of the CuIIL ground state. The combination of a nearly constant geometry and a large self-exchange rate constant implies that this CuII/I redox system represents a true geometric "entatic state."     

Bispidine copper(II) compounds: effects of the rigid ligand backbone

Approximative density-functional theory calculations indicate that the tetradentate ligand L (L = 2,4-bis-(2-pyridyl)-3,7-diaza-[3.3.1]-bicyclononane) enforces an unusual and strong binding of a co-ligand (substrate) to a copper(II) center. The co-ligand in [Cu(L)(Cl)](+) completes a square-pyramidal coordination around copper(II) and binds in the equatorial plane rather than on the apical position. This configuration is a stable geometric isomer for the model complex [Cu(NH3)2(imine)2(Cl)](+), but it is disfavored by approximately 10 kJ mol(-1) and not commonly observed for CuN4 chromophores with a monodentate co-ligand. The equatorial coordination increases the bond energy of the copper(II)-chloride bond by approximately 80 kJ mol(-1), and similar results are expected for other copper(II)-L-substrate complexes, some of which show strong catalytic activity or unusual stability. Despite the enforced configuration, L does not impose significant steric strain on the copper(II) center but is well preorganized for the Jahn-Teller labile ion in this unusual geometry. The preorganization extends to the orientation of the pyridine donors (torsion angle around the copper-pyridine bond), and this seems to be of importance in the reactivity of the copper-L complexes and their derivatives.     

Identification and characterization of monoanionic tripodal tetradentate ligand complexes of copper(I) and copper(II) involved in halogen atom transfer reactions

The copper(I) complex of bis-(2-(2-pyridyl)-ethyl)-(2-(N-p-toluenesulfonamido)-ethyl)amine (PETAEA), a monoanionic, tripodal tetradentate ligand, was prepared, characterized, and shown to be an effective catalyst for atom transfer radical polymerization (ATRP). A model atom transfer reaction of Cu(PETAEA) with 1-phenylethyl bromide and TEMPO radical trapping agent was studied. The copper(II) complex formed in this reaction was identified by comparison of its spectroscopic data with that of Cu(PETAEA)Br prepared by an independent synthesis. Kinetic and spectroscopic data indicated that the reaction mechanism involved simple atom transfer from the alkyl halide to the Cu(PETAEA) to form the Cu(PETAEA)Br, and no other intermediates were involved. The solid-state structures of the copper(I) and (II) complexes appeared to be maintained in solution, so this system is an atom transfer reaction in which all of the reactive species are identified and characterized.     

Supramolecular isomers of metal-organic frameworks: the role of a new mixed donor imidazolate-carboxylate tetradentate ligand

Five new metal-organic frameworks prepared from the ligand 5-bis(3-(1-imidazolyl)propylcarbamoyl)terephthalate (bipta(2-)) and transition metal salts, Zn(2+) (1), Co(2+) (2), Mn(2+) (3, 4) and Cu(2+) (5), are reported. Single crystal X-ray studies reveal that the bipta(2-) ligand acts as a tetradentate ligand and combines with four-coordinate cationic metal nodes to give four-connected framework structures. Whilst reaction of bipta(2-) with Zn(II) gives rise to a framework of diamondoid topology 1, the analogous frameworks with Co(II), Mn(II) and Cu(II) afford frameworks that incorporate square-planar nodes. Whereas 2 and 5 form frameworks of Cd(SO(4)) (cds) and square 4(4) nets (sql), respectively, reaction of Mn(II) with bipta(2-) forms two supramolecular isomers of topology cds for 3 and sql for 4.     

A tetrameric copper(I) alkoxide with a π-tethered ligand: 2-allyl-6-methylphenoxocopper(I)

The complex 2-allyl-6-methylphenoxocopper(I) has been prepared by reaction between mesitylcopper(I) and 2-allyl-6-methylphenol. Crystallographic studies show that the compound is tetrameric with a distorted cubane-type copper(I)-oxygen core, and with additional π-coordination of the ligand to copper through the alkene functionality (ν(CC)=1520 cm⁻¹). The ligands thus act both as chelates and as bridges between adjacent copper(I) centres. Copper(I) exhibits trigonal pyramidal coordination geometry with CuC distances to the CC group of 1.976(9) and 2.017(11) Å and CuO distances of 1.973(6), 2.021(6) and 2.577(6) Å, respectively.     

Direct evidence for a geometrically constrained "entatic state" effect on copper(II/I) electron-transfer kinetics as manifested in metastable intermediates

The absolute magnitude of an "entatic" (constrained) state effect has never been quantitatively demonstrated. In the current study, we have examined the electron-transfer kinetics for five closely related copper(II/I) complexes formed with all possible diastereomers of [14]aneS(4) (1,4,8,11-tetrathiacyclotetradecane) in which both ethylene bridges have been replaced by cis- or trans-1,2-cyclohexane. The crystal structures of all five Cu(II) complexes and a representative Cu(I) complex have been established by X-ray diffraction. For each complex, the cross-reaction rate constants have been determined with six different oxidants and reductants in aqueous solution at 25 degrees C, mu = 0.10 M. The value of the electron self-exchange rate constant (k(11)) has then been calculated from each cross reaction rate constant using the Marcus cross relation. All five Cu(II/I) systems show evidence of a dual-pathway square scheme mechanism for which the two individual k(11) values have been evaluated. In combination with similar values previously determined for the parent complex, Cu(II/I)([14]aneS(4)), and corresponding complexes with the two related monocyclohexanediyl derivatives, we now have evaluated a total of 16 self-exchange rate constants which span nearly 6 orders of magnitude for these 8 closely related Cu(II/I) systems. Application of the stability constants for the formation of the corresponding 16 metastable intermediates--as previously determined by rapid-scan cyclic voltammetry--makes it possible to calculate the specific electron self-exchange rate constants representing the reaction of each of the strained intermediate species exchanging electrons with their stable redox partners--the first time that calculations of this type have been possible. All but three of these 16 specific self-exchange rate constants fall within--or very close to--the range of 10(5)-10(6) M(-1) s(-1), values which are characteristic of the most labile Cu(II/I) systems previously reported, including the blue copper proteins. The results of the current investigation provide the first unequivocal demonstration of the efficacy of the entatic state concept as applied to Cu(II/I) systems.     

Synthesis and crystal structure of a copper(II) complex of the tripodal tetradentate ligand tris(2-benzimidazolylmethyl)amine

A mononuclear copper complex [Cu(NTB)Cl]Cl·3CH₃CH₂OH (1) (NTB?=?tris(2-benzimidazolylmethyl)amine) was synthesized and its structure was determined by single crystal X-ray diffraction. In this complex, copper(II) is five-coordinate with NTB serving as a neutral tetradentate ligand. Three tertiary nitrogen atoms of benzimidazole groups of NTB formed the base of the trigonal bipyramidal geometry. One axial position was occupied by the apical nitrogen atom of NTB and the other was occupied by chloride. The ESR spectrum of complex 1 in ethanol at 101?K was recorded and the well-defined ESR parameters (g _∥?=?2.02, g _⊥ =?2.16 and A _∥ ^?=?109?G) indicated that the Cu(II) has a distorted trigonal-bipyramidal environment, in good agreement with crystal structure determination for complex 1.     

Structures of a tetradentate ferrocenyl ligand and its oxorhenium(V) complex in solution and in the solid state

The novel ferrocenyl ligand rac-1,6-diferrocenyl-N,N'-bis(2-hydroxypropyl)-2,5-diazahexane (1, H(2)L) was synthesized from ferrocenylcarboxaldehyde and ethylenediamine followed by the reduction of the Schiff base with LiAlH(4) and subsequent N-alkylation with 1,2-propyleneoxide. The dianion of H(2)L reacted with [ReO(PPh(3))(2)Cl(3)], and the product was treated with NH(4)PF(6) to afford the complex [ReO(L-N(2)O(2))PPh(3)]PF(6) (2). Both the ferrocenyl ligand and the complex were characterized in solution by NMR spectroscopy and in the solid state by single-crystal X-ray diffraction studies. NMR investigations reveal two solvent-dependent isomers for the ferrocenyl ligand in solution of which the major form is the more ordered one. The cation of 2 displays a nonsymmetrically coordinated N(2)O(2) ligand.     

Gold(I) ethylene and copper(I) ethylene complexes supported by a polyhalogenated triazapentadienyl ligand

A rare gold(I) ethylene complex and the closely related copper(I) ethylene adduct have been isolated using [N{(C3F7)C(2,6-Cl2C6H3)N}2]- as the supporting ligand. [N{(C3F7)C(2,6-Cl2C6H3)N}2]Au(C2H4) (1) is an air-stable solid. It features a U-shaped triazapentadienyl ligand backbone and a three-coordinate, trigonal-planar gold center. The copper(I) adduct [N{(C3F7)C(2,6-Cl2C6H3)N}2]Cu(C2H4) (2) also has a similar structure. The 13C NMR signal corresponding to the ethylene carbons of 1 appears at about 64 ppm upfield from the free ethylene, while the ethylene carbons of 2 show a relatively smaller (39 ppm) upfield shift. [N{(C3F7)C(2,6-Cl2C6H3)N}2]M(C2H4) (M=Cu, Au) mediate carbene-transfer reactions from ethyl diazoacetate to saturated and unsaturated hydrocarbons.     

Copper(I) complexes, copper(I)/O(2) reactivity, and copper(II) complex adducts, with a series of tetradentate tripyridylalkylamine tripodal ligands

Copper(I) and copper(II) complexes possessing a series of related ligands with pyridyl-containing donors have been investigated. The ligands are tris(2-pyridylmethyl)amine (tmpa), bis[(2-pyridyl)methyl]-2-(2-pyridyl)ethylamine (pmea), bis[2-(2-pyridyl)ethyl]-(2-pyridyl)methylamine (pmap), and tris[2-(2-pyridyl)ethyl]amine (tepa). The crystal structures of the protonated ligand H(tepa)ClO(4), the copper(I) complexes [Cu(pmea)]PF(6) (1b-PF(6)), [Cu(pmap)]PF(6) (1c-PF(6)), and copper(II) complexes [Cu(pmea)Cl]ClO(4).H(2)O (2b-ClO(4).H(2)O), [Cu(pmap)Cl]ClO(4).H(2)O (2c-ClO(4).H(2)O), [Cu(pmap)Cl]ClO(4) (2c-ClO(4)), and [Cu(pmea)F](2)(PF(6))(2) (3b-PF(6)) were determined. Crystal data: H(tepa)ClO(4), formula C(21)H(25)ClN(4)O(4), triclinic space group P1, Z = 2, a = 10.386(2) A, b = 10.723(2) A, c = 11.663(2) A, alpha = 108.77(3) degrees, beta = 113.81(3) degrees, gamma = 90.39(3) degrees; 1b-PF(6), formula C(19)H(20)CuF(6)N(4)P, orthorhombic space group Pbca, Z = 8, a = 14.413(3) A, b = 16.043(3) A, c = 18.288(4) A, alpha = beta = gamma = 90 degrees; (1c-PF(6)), formula C(20)H(22)CuF(6)N(4)P, orthorhombic space group Pbca, Z = 8, a = 13.306(3) A, b = 16.936(3) A, c = 19.163(4) A, alpha = beta = gamma = 90 degrees; 2b-ClO(4).H(2)O, formula C(19)H(22)Cl(2)CuN(4)O(5), triclinic space group P1, Z = 4, a = 11.967(2) A, b = 12.445(3) A, c = 15.668(3) A, alpha = 84.65(3) degrees, beta = 68.57(3) degrees, gamma = 87.33(3) degrees; 2c-ClO(4).H(2)O, formula C(20)H(24)Cl(2)CuN(4)O(5), monoclinic space group P2(1)/c, Z = 4, a = 11.2927(5) A, b = 13.2389(4) A, c = 15.0939(8) A, alpha = gamma = 90 degrees, beta = 97.397(2) degrees; 2c-ClO(4), formula C(20)H(22)Cl(2)CuN(4)O(4), monoclinic space group P2(1)/c, Z = 4, a = 8.7682(4) A, b = 18.4968(10) A, c = 13.2575(8) A, alpha = gamma = 90 degrees, beta = 94.219(4) degrees; 3b-PF(6), formula [C(19)H(20)CuF(7)N(4)P](2), monoclinic space group P2(1)/n, Z = 2, a = 11.620(5) A, b = 12.752(5) A, c = 15.424(6) A, alpha = gamma = 90 degrees, beta = 109.56(3) degrees. The oxidation of the copper(I) complexes with dioxygen was studied. [Cu(tmpa)(CH(3)CN)](+) (1a) reacts with dioxygen to form a dinuclear peroxo complex that is stable at low temperatures. In contrast, only a very labile peroxo complex was observed spectroscopically when 1b was reacted with dioxygen at low temperatures using stopped-flow kinetic techniques. No dioxygen adduct was detected spectroscopically during the oxidation of 1c, and 1d was found to be unreactive toward dioxygen. Reaction of dioxygen with 1a-PF(6), 1b-PF(6), and 1c-PF(6) at ambient temperatures leads to fluoride-bridged dinuclear copper(II) complexes as products. All copper(II) complexes were characterized by UV-vis, EPR, and electrochemical measurements. The results manifest the dramatic effects of ligand variations and particularly chelate ring size on structure and reactivity.     

First diphosphinoamine ligand bearing a polymerizable side chain: Complexation with copper(I)

A diphosphinoamine ligand with a polymerizable side chain, (PPh₂)₂N? CH₂? C₆H₄? CH?CH₂ (vbzpnp or 1 ), was synthesized. The ligand could be polymerized by anionic polymerization with n‐butyllithium as the initiator. Polyvbzpnp was soluble in tetrahydrofuran and chloroform but was insoluble in methanol and was characterized with NMR, IR, and gel permeation chromatography. The number‐average and weight‐average molecular weights were 40,050 and 55,690, respectively, and the polydispersity index was 1.39. [Cu(CH₃CN)₄]ClO₄ formed a bischelated complex with the monomer and produced [Cu( 1 )₂]ClO₄ ( 2 ), and CuCl formed a tetramer, Cu₄( 1 )₂Cl₄ ( 3 ). All the compounds ( 1 , 2 , and 3 ) were characterized with single‐crystal‐structure determination, NMR, and IR spectroscopy. The addition of [Cu(CH₃CN)₄]ClO₄ to polyvbzpnp resulted in an insoluble crosslinked polymer, which was characterized with solid‐state ³¹P {¹H} magic‐angle‐spinning NMR. The copolymerization of styrene and 1 produced a styrene–vbzpnp copolymer that was found to be soluble in common organic solvents. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3411–3420, 2005     

Diastereoselective formation of a dipalladium(I) complex supported by a bridging tetradentate ligand,and oxidative addition of RS-H across a phosphine-bridged Pd(I)-Pd(I) bond

The ligand CH2(P(o-C6H4NMe2)2)2 (dmapm) gives access to the first example of a dipalladium(I) complex supported by a tetradentate ligand, Pd2Cl2(mu-N,P,P,N-dmapm), which, unlike the well-known Pd2X2(mu-dppm)2 complexes (X = halide, dppm = bis(diphenylphosphino)methane), reacts with thiols to give addition of RS-H across a phosphine-bridged Pd-Pd bond.     

Ground and excited state electronic interactions in a bis(phenanthroline) copper(I) complex sandwiched between two fullerene subunits

A new fullerene-substituted phenanthroline ligand has been obtained by reaction of a phenanthroline derivative bearing a 1,3-phenylenebis(methylene)-tethered bis-malonate with C(60) in a double Bingel cyclopropanation. The relative position of the two cyclopropane rings in the resulting bis-methanofullerene derivatives has been determined on the basis of the molecular symmetry (C(s)()) deduced from the (1)H and (13)C NMR spectra. The corresponding Cu(I) complex F-Cu-F has been prepared in good yields by treatment of the ligand with Cu(CH(3)CN)(4)BF(4). In the resulting multicomponent system, both C(60) moieties are in a tangential orientation relative to their bridging phenyl ring, and the central bis(phenanthroline)Cu(I) core is sandwiched between the two carbon spheres. The electrochemical properties of F-Cu-F suggest the existence of ground-state electronic interactions in this multicomponent array based on the mutual effects exerted by the fullerene units to the bis(2,9-diphenyl-1,10-phenanthroline)Cu(I) complex and vice versa. Close vicinity and electronic interactions between the inorganic core and the peripheral fullerene units are also suggested by increased electronic absorption around 430 nm. The distance between the two moieties is estimated to be 4.3 A by molecular modeling studies. The excited-state properties of F-Cu-F have also been investigated. Photoinduced electron transfer from the central chromophore to the external fullerene units occurs but, surprisingly, only following population of the excited states of the central inorganic unit and not of the external carbon spheres. This is mainly attributed to kinetic factors related to the different nature of the two types of excited states involved, namely charge transfer (excitation on the metal-complexed moiety) vs a localized state (excitation on the fullerene units).     

2,9-Di-(2'-pyridyl)-1,10-phenanthroline: a tetradentate ligand for Ru(II)

The tetradentate ligand 2,9-di-(2'-pyridyl)-1,10-phenanthroline is synthesized in 62% yield by the Stille coupling of 2,9-dichloro-1,10-phenanthroline and 2-(tri-n-butylstannyl)pyridine. Treatment of this ligand with RuCl3.3H2O and a 4-substituted pyridine results in the formation of a complex in which the tetradentate ligand occupies the equatorial plane and two pyridines are bound axially. The interior N-Ru-N angles vary from 76.1 degrees to 125.6 degrees , showing considerable distortion from the 90 degrees ideal. The lowest energy electronic transition is sensitive to the electronegativity of the 4-substituent on the axial pyridines, varying from 516 nm for the CF3 group to 580 nm for the NMe2. The oxidation potentials mirror this trend, spanning a range of 1.36-1.03 V, while the reduction potentials show less variation (-0.97 to -1.08 V). The complexes are nonemissive, presumably due to competitive nonradiative processes caused by distortion of the system.     

Bi- and trinuclear copper(II) complexes of a sterically constrained phenol-based tetradentate ligand: syntheses, structures, and magnetic studies

Copper(II) complexes (1-3) of a sterically constrained phenol-based tetradentate N(2)O(2) ligand 1,4-bis(2-hydroxy-3,5-dimethylbenzyl)piperazine (H(2)L) have been reported. The associated anions of the copper(II) ion precursors have profound influence on the stoichiometry of the products. Thus, with perchlorate ion, the product is a binuclear compound [Cu(2)L(2)] (1), while with coordinating anions viz. Cl(-) and N(3)(-), the products [Cu(3)L(2)Cl(2)(H(2)O)].1/2H(2)L (2) and [Cu(3)L(2)(N(3))(2)(CH(3)OH)].4H(2)O (3) have triangulo trinuclear composition. The syntheses, X-ray structures, and spectroscopic and magnetic properties of these complexes are described. Compound 1 has a noncentrosymmetric structure with a rectangular Cu(2)(OPh)(2) core. It appears to be a rare example of a phenolato-bridged Cu(II) dimer exhibiting ferromagnetic interactions (J = 0.93 cm(-)(1)), a behavior in agreement with the theoretical predictions but seldom observed experimentally. In compounds 2 and 3, the copper centers are triangularly disposed, and the molecules have a shape much like that of a butterfly. The terminal copper centers Cu(1) and Cu(2) in 2 and 3 have distorted square pyramidal geometry, connected to each other by a bridging chloro- (in 2) or azido ligand (in 3) in "end to end" fashion. The central copper center (Cu(3) in 2 and Cu in 3) in both the compounds has distorted square planar geometry. The separations between the metal centers, viz. Cu(1)...Cu(2), Cu(2)...Cu(3), and Cu(3)...Cu(1), are 4.826, 3.214, and 3.244 A, respectively, in 2. The corresponding distances in 3 are 5.590, 3.178, and 3.485 A, respectively. The overall magnetic behaviors in 2 and 3 are consistent with antiferromagnetic interactions between the spin centers. In 3, the exchange couplings between the terminal and central copper centers J(Cu(1))(-)(Cu) and J(Cu(2))(-)(Cu) appear to be equal (-234 cm(-)(1)), resulting in an S = (1)/(2) ground state at temperatures near or below 77 K.