超临界CO2中丙烯酸含氟酯疏水改性聚丙烯酸的合成

研究了在超临界二氧化碳条件下 ,丙烯酸 1,1 二氢全氟辛酯 (FOA)对聚丙烯酸疏水改性的共聚反应 .发现与通常聚合方法相比含氟丙烯酸酯的产率得到提高 ;反应时间从 2 4h缩短到 4h ;所得产物的后处理也更容易 .同时发现温度对反应有影响 ,含氟酯单体在低温 (T <5 5 0℃ )时活性高于丙烯酸单体 ,在高温 (T >6 0 0℃ )时丙烯酸活性提高较大 .而共聚物水溶液粘度随pH值变化先上升后下降 ,在pH =5 0出现峰值 ,显示其中有分子间缔合存在 .与改性聚丙烯酰胺不同 ,改性聚丙烯酸水溶液粘度随FOA含量的增加而单调上升 ,也证明了分子间缔合的存在     

Synthesis of highly cross-linked poly(diethylene glycol dimethacrylate) microparticles in supercritical carbon dioxide

Herein we report the synthesis of poly(diethylene glycol dimethacrylate), poly(DEGDMA), by free-radical heterogeneous polymerization in supercritical carbon dioxide (scCO₂), using a commercially available carboxylic acid end-capped perfluoropolyether oil (Krytox 157FSL) as stabiliser. The effect of initial concentration of stabiliser, monomer and initiator on the yield and morphology of the resulting polymer has been investigated. Krytox worked effectively as a stabiliser and discrete poly(DEGDMA) particles with diameters ranging from 1.28 to 2.08 μm and narrow particle size distribution were produced in supercritical carbon dioxide, in high yield and in short reaction times, without making use of harmful organic solvents.     

Solubilities of cinnamic acid,phenoxyacetic acid and 4-methoxyphenylacetic acid in supercritical carbon dioxide

The solid solubilities of cinnamic acid, phenoxyacetic acid and 4-methoxyphenylacetic acid in supercritical carbon dioxide were measured using a semi-flow apparatus. The experiments were taken at 308.2, 318.2 and 328.2 K. The pressure range was from 11 to 24 MPa. These data were confirmed as equilibrium solid solubilities based on a plug flow mass transfer model. The solid solubilities were further correlated using the equations of state or semi-empirical models. The correlation results are satisfactory with optimally fitted binary interaction parameters in the Peng–Robinson equation of state.     

Lewis acids catalyzed ring-opening reactions of methylenecyclopropanes and epoxides in supercritical carbon dioxide or modified supercritical carbon dioxide with perfluorocarbon

The reactions of methylenecyclopropanes (MCPs) and epoxides with alcohols and aromatic amines can be carried out in supercritical carbon dioxide (scCO₂) or modified scCO₂ with perfluorocarbon which offer a way to synthesize various alcohols, amino-alcohols, homoallylic ethers, and amines under an environmentally benign condition.     

Synthesis of water-soluble hyperbranched polymer and its application in acrylic latex

A water-soluble hyperbranched polymer (WHBP), obtained from a second generation of hyperbranched polyester and maleic anhydride, was studied. Its effects on the properties of acrylic latexes, which were based on emulsion polymerization of butyl acrylate (BA), methyl methacrylate (MMA), acrylic acid (AA) and WHBP, and latex film were discussed. The characteristics of WHBP were determined by nuclear magnetic resonance spectroscopy (NMR), Fourier transform infrared (FTIR) and gel permeation chromatography (GPC). Particle size and morphology of latex particles were confirmed by dynamic light scattering (DLS) and transmission electron microscope (TEM). The investigation showed that WHBP could be used in emulsion polymerization, and that latex of poly(BA-MMA-WHBP) was more stable than that of poly(BA-MMA-AA). The hardness of latex film increased from 2B to HB when WHBP was used.     

Synthesis of polystyrene microspheres by dispersion polymerization in supercritical carbon dioxide using a poly(dimethylsiloxane)-based macroazoinitiator

The synthesis of polystyrene microspheres was achieved by the dispersion polymerization of styrene in supercritical carbon dioxide using azobisisobutylonitrile (AIBN) and a poly(dimethylsiloxane) (PDMS)-based macroazoinitiator, VPS-1001. VPS-1001 contained seven to nine molecules of the azo groups and the PDMS blocks with a molecular weight of 10,000 per molecule. The polymerization in the presence of both VPS-1001 and AIBN produced polystyrene microspheres with a diameter below 4 μm in over 85% yields, whereas the polymerization with VPS-1001 in the absence of AIBN provided a nonspecific polystyrene in only 20% yield. The particle size decreased as a result of increasing the concentration of VPS-1001. It was confirmed that the polystyrene particles were stabilized by the PDMS-block-polystyrene formed through the polymerization initiated by VPS-1001 because the polymerization using a PDMS homopolymer provided nonspecific polystyrene as a precipitate during the polymerization.     

Monte Carlo simulation of solute extraction via supercritical carbon dioxide from poly(ethylene glycol)

The partitioning of ethylbenzene between poly(ethylene glycol) (PEG) and supercritical carbon dioxide was studied at 308.15, 328.15 and 348.15 K and 10, 15.5 and 20 MPa with PEG-400, 600 and 900 using Monte Carlo molecular simulation. The effect of a cosolvent was also studied with either 5% ethane or 5% n-octane added. Ethylbenzene favored the supercritical phase most when the density was highest, and while ethane had little effect, the addition of n-octane increased the amount of solute dissolved in carbon dioxide. Increasing polymer molecular weight led to more solute in the PEG-rich phase. This coincides with a higher amount of dissolved carbon dioxide that preferentially solvates ethylbenzene.     

Polymerisation of vinylidene fluoride in supercritical carbon dioxide: Formation of PVDF macroporous beads

Poly(vinylidene fluoride) (PVDF) macroporous beads with diameter in the range of hundreds of micrometers were produced by batch polymerisation of vinylidene fluoride (VDF) in supercritical carbon dioxide (scCO₂) using diethyl peroxydicarbonate (DEPDC) as a free radical initiator. The rate and type of stirring were found to influence strongly the morphology of polymers, and the results indicated that the shear force was the key factor. A low shear force and a suitable monomer concentration range at 6-8 mol/l were needed for the formation of PVDF macroporous beads. Scanning electron microscopy (SEM) was employed to characterize the polymer morphology, and Brunauer-Emmett-Teller (BET) method was used to analyze the surface area of the polymer macroporous beads. In addition, polydimethylsiloxane monomethylacrylate (PDMS-ma) and poly(1H,1H,2H,2H-perfluorooctyl methacrylate) (PFOMA) were found to be able to control the size of PVDF macroporous beads. We propose that the formation of PVDF macroporous beads results from the aggregation of semi-crystalline PVDF primary particles.     

Measurements of the solubilities of derivatized amino acids in supercritical carbon dioxide

The solubilities of phenylalanine and tyrosine in supercritical carbon dioxide (SCCO₂) were measured after derivatization as the N-acetyl amino acid ethyl ester, N-carbobenzoxy amino acid and N-acetyl amino acid. Using an SCCO₂ flow system, a measuring method of the saturated solubilities of the derivatized amino acids was established in which the contact height of the extraction cell, i.e. a packed column, is increased till the concentration of a derivatized amino acid at the exit of the cell reaches a plateau. The solubilities of N-acetyl phenylalanine ethyl ester (APEE) exceeded 0.001 mole fraction, which is higher than those of caffeine produced in industrial SCCO₂ processes. A possible way of separating the amino acid mixtures using polarity differences in different amino acid side chains was demonstrated using the solubility data of the N-acetyl-amino acid ethyl esters in SCCO₂, as the solubilities of APEE are higher than those of N-acetyl tyrosine ethyl ester by two orders of magnitude.     

Solubility of iodopropynyl butylcarbamate in supercritical carbon dioxide

Supercritical carbon dioxide has been considered an appropriate alternative for extraction and purification process of cosmetics, pharmaceuticals, food supplements and natural products. Solubility information of biological compounds is essential for choosing supercritical fluid (SCF) processes. The solubility of iodopropynyl butylcarbamate (IPBC), a fungicide and anti-dandruff agent, was measured in supercritical carbon dioxide with a high pressure apparatus equipped with a variable volume view cell at 313.15, 323.15, and 333.15 K and at pressure between 80 and 35 MPa. The experimental data were correlated well with Peng–Robinson equation of state (PR EOS) and quasi-chemical nonrandom lattice fluid model.     

Production of poly(methyl methacrylate) particles by dispersion polymerization with mercaptopropyl terminated poly(dimethylsiloxane) stabilizer in supercritical carbon dioxide

Poly(methyl methacrylate) (PMMA) particles were produced by dispersion polymerization of methyl methacrylate in the presence of mercaptopropyl terminated poly(dimethylsiloxane) (MP-PDMS) in supercritical carbon dioxide at about 30 MPa for 24 h at 65 °C. The particle diameter could be controlled in a size range of submicron to micron by varying MP-PDMS concentration. The MP-PDMS worked as not only a chain transfer agent but also a colloidal stabilizer, which was named tran stab.Part CCLI of the series Studies on suspension and emulsion     

Measurement and correlation of solubility of artemisinin in supercritical carbon dioxide

Artemisinin is an effective antimalarial drug isolated from the herbal medicine Artemisia annua L. Supercritical fluid extraction is an environment-friendly method for the extraction of artemisinin. In this work, the solubility of artemisinin in supercritical carbon dioxide was determined by static method at three temperatures of 313 K, 323 K, 333 K and pressures from 11 to 31 MPa. The range of experimental solubility data was from 0.498 × 10⁻³ to 2.915 × 10⁻³ mol/mol under the above-mentioned conditions. Two density-based models (Chrastil and Mendez–Santiago–Teja models) were selected to correlate the experimental data of this work, and the average absolute relative deviation (AARD) was 8.32% and 8.33%, respectively. The correlation results showed good agreement with the experimental data.     

Preparation of poly(acrylic acid)‐b‐polystyrene by two‐step atom transfer radical polymerization in supercritical carbon dioxide

It is known that it is difficult to polymerize carboxylic acid‐based monomer by atom transfer radical polymerization (ATRP) in polar solvents due to the protonation of ligand caused by acidic dissociation of the monomer. In this study, precipitation reverse ATRP of acrylic acid (AA) was carried out in supercritical carbon dioxide (scCO₂), which is a nonpolar solvent to dissolve transition metal complexes, at 30 MPa and 45 °C. The polymerization proceeded smoothly and the conversion reached 86% for 3 h. After vending of scCO₂, a dry poly(acrylic acid) (PAA) powder was obtained. Weight‐average molecular weight and polydispersity of the methylated PAA, which were measured by gel‐permeation chromatography after methyl esterification, were 3.5 × 10⁴ and 2.07, respectively, indicating that the precipitation reverse ATRP proceeded with a bad control manner. However, chain extension of the methylated PAA with styrene was possible by ATRP in a bulk system. Moreover, PAA‐b‐polystyrene was successfully prepared in scCO₂ directly by two‐step ATRP, although its molecular weight distribution was broad. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Extraction of atabron residues from cabbage with supercritical carbon dioxide

Summary In this work we present a new procedure for extraction of Atabron residues from cabbage samples using supercritical carbon dioxide. The results obtained with this procedure were compared with those obtained using traditional extraction methods for Atabron residues. The extraction yields found by both procedures are similar but SFE has several advantages, especially higher speed, greater economy, better selectivity and greater reproducibility.     

Efficient synthesis of isoindoles using supercritical carbon dioxide

Bicyclopyrroles were efficiently converted to the corresponding isoindoles by a retro Diels-Alder reaction in supercritical carbon dioxide. By adding ethylene gas as an oxygen scavenger, the isoindole yield was further improved.     

Morphology Evolution of Poly（vinylidene fluoride） Membranes during Supercritical CO2 Assisted Phase Inversion

A supercritical carbon dioxide（Sc CO2） assisted phase inversion was developed to produce microporous poly（vinylidene fluoride）（PVDF） membranes whose morphology characteristics arise from both liquid-liquid demixing and solid-liquid demixing（crystallization）. This result was confirmed by Fourier transform infrared spectroscopy（FTIR）, from which both α and β crystals were found. As revealed by contact angle experiment, the PVDF membranes prepared via Sc CO2 assisted phase inversion were more hydrophobic compared with the control membrane produced via conventional immersionprecipitation technique. In particular, the sample with 15 wt% PVDF prepared at 45 °C and 13 MPa exhibited a contact angle of 142°, which was mainly caused by the multilevel micro- and nano- structure. The effects of polyethylene glycol（PEG）, polyvinyl pyrrolidone（PVP） and lithium chloride（Li Cl） on the structures and crystal form were investigated. PVP promoted the formation of β phase crystal form, while PEG boosts the evolution of α phase. Li Cl restrained the crystallization degree of PVDF membrane under Sc CO2.     

Solubilities and partial molar volumes of three bis(2-ethoxyethyl) ethanedioate derivatives in supercritical carbon dioxide

Three new CO₂-philic bis(2-ethoxyethyl) ethanedioate derivatives, bis(2-(2-methoxyethoxy)ethyl) ethanedioate (compound 1), bis(2-(2-ethoxyethoxy)ethyl) ethanedioate (compound 2), and bis(2-(2-butoxyethoxy)ethyl) ethanedioate (compound 3), were designed and synthesized and their solubilities in supercritical carbon dioxide (scCO₂) were then measured at different temperatures (313, 323, 333) K over the pressure range (8.9 to 13.9) MPa. The measured solubility data were correlated with five different theoretical semi-empirical models (Chrastil, kJ, SS, MST, JCF) and satisfactory agreements were obtained. The JCF model provided the best fit and the lowest average absolute relative deviation (AARD) varied from (3.58 to 6.80)%. Furthermore, the partial molar volumes of three compounds in the supercritical phase were also calculated according to the Kumar and Johnston theory, and the values were between −(19105 and 3510) cm³ · mol⁻¹.     

Diffusion coefficients of metal acetylacetonates in supercritical carbon dioxide

Binary diffusion coefficients, D₁₂, of the metal acetylacetonates, palladium(II) acetylacetonate and cobalt(III) acetylacetonate, were measured from 308.2 to 343.2 K over the pressure range from 9 to 40 MPa at infinite dilution in supercritical carbon dioxide using the chromatographic impulse response method. The effects of pressure, temperature, density, and viscosity on D₁₂ values were examined. It was observed that the D₁₂ values of palladium(II) acetylacetonate and cobalt(III) acetylacetonate were larger than those of lipids with similar molecular weights, such as arachidonic acid and monoolein, respectively. Furthermore, the measured D₁₂ data of each metal acetylacetonate were well correlated by the hydrodynamic equation D₁₂/T as a function of carbon dioxide viscosity.     

Production of submicron-sized poly(methyl methacrylate) particles by dispersion polymerization with a poly(dimethylsiloxane)-based azoinitiator in supercritical carbon dioxide

 Submicron-sized, comparatively monodisperse poly (methyl methacrylate) particles were produced by dispersion polymerization of methyl methacrylate with a poly(dimethylsiloxane)-based azoinitiator in supercritical carbon dioxide at 30 MPa for 24 h at 65 °C. The initiator operated not only as a radical initiator but also as a colloidal stabilizer, and was named an “inistab”. Received: 13 February 2001 Accepted: 20 June 2001