Preparation and preliminary characterization of poly(ethylene glycol)-pepstatin conjugate

The carboxyl function of pepstatin has been coupled, through an amide bond, to methoxypoly(ethylene glycol) (5 kDa), to which an amino function had been previously grafted. The mPEG-pepstatin conjugate inhibits hog pepsin (aspartic proteinase) in vitro as pepstatin itself, however, with a 400 times higher apparent K_i. The conjugate apparently does not inhibit proteinases belonging to other proteinase families such as serine (trypsin, carboxypeptidase Y), cysteine (Papaya proteinase III), or metallo (collagenase) proteinases.     

Folate receptor-mediated gene delivery using folate-poly(ethylene glycol)-poly(L-lysine) conjugate

For efficient receptor-mediated gene transfection, a new and simple formulation method based on using PEI and FOLPEGPLL conjugate was presented. Luciferase plasmid DNA and PEI were complexed to form slightly positive-charged nanoparticles, onto which FOL-PEG-PLL conjugate was surface coated. With increasing the coating amount of FOL-PEG-PLL conjugate, the FOL-PEG-PLL/PEI/DNA complexes exhibited increased surface zeta-potential values with concomitantly increased diameters, indicating that the PLL part was physically anchored on the surface of preformed PEI/DNA complexes with FOL moieties being exposed on the outside. The formulated complexes exhibited a considerably higher transfection efficiency against FOL receptor over-expressing KB cells than FOL receptor deficient A549 cells. This was caused by an enhanced cellular uptake of the resultant complexes via a receptor-mediated endocytosis process. The formulated complexes showed a higher gene expression level, even in the presence of serum, than the PEI/DNA or Lipofectamine/DNA complexes. This was attributed to the PEG chains present on the surface of complexes that could work as a protective shield layer against aggregation caused by non-specific protein adsorption. The FOL-PEG-PLL/PEI/DNA complexes also demonstrated better cell viability than the PEI/DNA complexes.(1)H NMR spectrum of FOL-PEG-PLL conjugate.     

Structural study of BSA/poly(ethylene glycol) lipid conjugate complexes

In this work we report the structural characteristics of bovine serum albumin/poly(ethylene glycol) lipid conjugate (BSA/PEG(2000)-PE) complexes under physiological conditions (37 degrees C and pH 7.4) for particular fractions of BSA to PEG-lipid concentration, c(BSA)/c(PEG)(2000)-PE. Ultraviolet fluorescence spectroscopy (UV) results shown that PEG(2000)-PE is associated to BSA, leading to protein unfolding for fixed c(BSA) = 0.01 wt % and variable c(PEG)(2000)-PE = 0.0015-0.6 wt %. Tryptophan groups on the BSA surface are in contact with the PEG-lipid at c(PEG)(2000)-PE = 0.0015 wt %, while they are exposed to water at c(PEG)(2000)-PE > 0.0015 wt %. Dynamic and static light scattering (DLS and SLS) and small-angle neutron scattering (SANS) point out the existence of individual BSA/PEG-lipid complexes in the system for fixed c(BSA) = 1 wt % and variable c(PEG)(2000)-PE = 0.15-2 wt %. DLS shows that there is only one BSA molecule per protein/PEG-lipid complex, while SLS shows that the PEG-lipid associates to the BSA without promoting aggregation between adjacent protein/polymer-lipid conjugate complexes. SANS was used to show that BSA/PEG(2000)-PE complexes adopt an oblate ellipsoidal shape. Partially unfolded BSA is contained in the core of the oblate ellipsoid, which is surrounded by an external shell containing the PEG(2000)-PE.     

Target-specific cellular uptake of PLGA nanoparticles coated with poly(L-lysine)-poly(ethylene glycol)-folate conjugate

Poly(D,L-lactic-co-glycolic acid) (PLGA) nanoparticles with anionic surface charge were surface coated with cationic di-block copolymer, poly(L-lysine)-poly(ethylene glycol)-folate (PLL-PEG-FOL) conjugate, for enhancing their site-specific intracellular delivery against folate receptor overexpressing cancer cells. The PLGA nanoparticles coated with the conjugate were characterized in terms of size, surface charge, and change in surface composition by XPS. By employing the flow cytometry method and confocal image analysis, the extent of cellular uptake was comparatively evaluated under various conditions. PLL-PEG-FOL coated PLGA nanoparticles demonstrated far greater extent of cellular uptake to KB cells, suggesting that they were mainly taken up by folate receptor-mediated endocytosis. The enhanced cellular uptake was also observed even in the presence of serum proteins, possibly due to the densely seeded PEG chains. The PLL-PEG-FOL coated PLGA nanoparticles could be potentially applied for cancer cell targeted delivery of various therapeutic agents.     

Bioactive mesoglobules of poly(di(ethylene glycol) monomethyl ether methacrylate)–peptide conjugate

This study describes the synthesis and aggregation behavior of thermosensitive poly(di(ethylene glycol) monomethyl ether methacrylate) (P(DEGMA‐ME)) conjugated with the fluorescently labeled pentapeptide glycine‐arginine‐lysine‐phenylalanine‐glycine‐dansyl (GRKFG‐Dns). The GRKFG‐Dns was obtained using Fmoc solid‐phase peptide synthesis and was modified with 2‐bromopropionic acid to initiate an atom transfer radical polymerization of di(ethylene glycol) monomethyl ether methacrylate (DEGMA‐ME). The polymerization led to a well‐defined P(DEGMA‐ME)–GRKFG‐Dns conjugate with a number average molar mass of 108,000 g/mol. The pentapeptide acted as a hydrophilic moiety that increased the phase transition temperature compared to the P(DEGMA‐ME) homopolymer of similar molar mass. The bioconjugate macromolecules aggregated in dilute aqueous solution into spherical particles (mesoglobules). The sizes of aggregates were easily controlled by changing the concentration and heating rate of the P(DEGMA‐ME)‐GRKFG‐Dns solution. The weight average molar masses and sizes of mesoglobules were determined based on light scattering measurements. Enzymatic hydrolysis of the bioconjugate in dilute solution was performed at temperatures below and above the cloud point temperature of the bioconjugate. The peptides were fully accessible to enzymatic digestion even when the macromolecules were aggregated to mesoglobules, indicating that the peptide segments in mesoglobules formed the external shell of the nanoparticles and could be easily released by enzymes. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Micropallet arrays with poly(ethylene glycol) walls

Arrays of releasable micropallets with surrounding walls of poly(ethylene glycol) (PEG) were fabricated for the patterning and sorting of adherent cells. PEG walls were fabricated between the SU-8 pallets using a simple, mask-free strategy. By utilizing the difference in UV-transmittance of glass and SU-8, PEG monomer was selectively photopolymerized in the space surrounding the pallets. Since the PEG walls are composed of a cross-linked structure, the stability of the walls is independent of the pallet array geometry and the properties of the overlying solution. Even though surrounded with PEG walls, the individual pallets were detached from the array by the mechanical force generated by a focused laser pulse, with a release threshold of 6 microJ. Since the PEG hydrogels are repellent to protein adsorption and cell attachment, the walls localized cell growth to the pallet top surface. Cells grown in the microwells formed by the PEG walls were released by detaching the underlying pallet. The released cells/pallets were collected, cultured and clonally expanded. The micropallet arrays with PEG walls provide a platform for performing single cell analysis and sorting on chip.     

Synthesis of novel biodegradable poly(ethylene glycol) analogue:Water-soluble aliphatic polyester with pendant oligo(ethylene glycol) chains

A novel poly(ethylene glycol)(PEG) analogue composed of aliphatic polyester backbone and pendant oligo(ethylene glycol) short chains is reported.The PEG analogue is a copolymer synthesized by ring-opening alternating copolymerization of succinic anhydride with 2-((2-(2-metho xyethoxy)ethoxy)methyl)oxirane.The structure of the copolymer was confirmed by ~1H NMR spectrum.The effects of the monomer feed ratio on the copolymerization were studied and the polymerization mechanism was given.The PEG analogue di...     

Multifunctional Poly(ethylene glycol)s

In the rapidly evolving multidisciplinary field of polymer therapeutics, tailored polymer structures represent the key constituent to explore and harvest the potential of bioactive macromolecular hybrid structures. In light of the recent developments for anticancer drug conjugates, multifunctional polymers are becoming ever more relevant as drug carriers. However, the potentially best suited polymer, poly(ethylene glycol) (PEG), is unfavorable owing to its limited functionality. Therefore, multifunctional linear copolymers (mf‐PEGs) based on ethylene oxide (EO) and appropriate epoxide comonomers are attracting increased attention. Precisely engineered via living anionic polymerization and defined with state‐of‐the‐art characterization techniques—for example real‐time ¹H NMR spectroscopy monitoring of the EO polymerization kinetics—this emerging class of polymers embodies a powerful platform for bio‐ and drug conjugation.     

Positive microcontact printing with mercaptoalkyloligo(ethylene glycol)s

The soft lithographic replication of patterns with a low filling ratio by microcontact printing (microCP) is problematic due to the poor mechanical stability of common elastomeric stamps. A recently described strategy to avoid this problem employs a modified patterning method, positive microcontact printing ((+)microCP), in which a stamp with a mechanically more stable inverted relief pattern is used. In contrast to conventional negative microCP ((-)microCP), in the contact areas a self-assembled monolayer (SAM) is printed of a "positive ink", which provides only minor etch protection, whereas the noncontacted areas are subsequently covered with a different, etch-resistant SAM, prior to development by chemical etching. With the aim to identify novel, highly versatile positive inks, the patterning of gold by (+)microCP with mercaptoalkyloligo(ethylene glycol)s (MAOEGs), the subsequent adsorption of octadecanethiol (ODT), and the final development by wet chemical etching have now been studied. A polydisperse mixture of mercaptoundecylocta(ethylene glycol) derivatives was found to provide the best patterning results. The surface spreading of the positive ink during stamping, the exchange of printed MAOEGs with ODT, and the choice of the right etching bath were identified as key parameters that influence the achievable pattern resolution and contrast. Due to the modular composition of functionalized alkyloligo(ethylene glycol) derivatives, (+)microCP with these positive inks has the potential for easy adaptation to a variety of materials and development conditions.     

聚乙烯/聚乙二醇共混物中极性组分的表面富集

采用衰减全反射傅立叶变换红外光谱(FTIR-ATR)和扫描电子显微镜研究了极性组分聚乙二醇在聚乙烯／聚乙二醇共混物中的表面富集特性。研究结果认为不同组分表面自由能的差异以及聚乙烯基体的结晶异相排斥作用是导致聚乙二醇组分向共混物表面富集的主要驱动力，而极性组分相区的大小和分布则是影响其选择性迁移过程的重要因素。因此，可以通过添加合适相容剂的办法对聚乙二醇组分的表面富集程度进行有效的调控。     

Segmented block copolymers of poly(ethylene glycol) and poly(ethylene terephthalate)

A new series of segmented copolymers were synthesized from poly(ethylene terephthalate) (PET) oligomers and poly(ethylene glycol) (PEG) by a two‐step solution polymerization reaction. PET oligomers were obtained by glycolysis depolymerization. Structural features were defined by infrared and nuclear magnetic resonance (NMR) spectroscopy. The copolymer composition was calculated via ¹H NMR spectroscopy. The content of soft PEG segments was higher than that of hard PET segments. A single glass‐transition temperature was detected for all the synthesized segmented copolymers. This observation was found to be independent of the initial PET‐to‐PEG molar ratio. The molar masses of the copolymers were determined by gel permeation chromatography (GPC). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4448–4457, 2004     

Ion conductivity studies of blends of poly(methyl methacrylate)-g-poly(ethylene glycol) and poly(ethylene glycol) complexed with LiCF3 SO3

Polymer electrolytes which are adhesive, transparent, and stable to atmospheric moisture have been prepared by blending poly(methyl methacrylate)-g-poly(ethylene glycol) with poly(ethylene glycol)/LiCF₃ SO₃ complexes. The maximum ionic conductivities at room temperature were measured to be in the range of 10⁻⁴ to 10⁻⁵ s cm⁻¹. The clarity of the sample was improved as the graft degree increased for all the samples studied. The graft degree of poly(methyl methacrylate)-g-poly(ethylene glycol) was found to be important for the compatibility between the poly(methyl methacrylate) segments in poly(methyl methacrylate)-g-poly(ethylene glycol) and the added poly(ethylene glycol), and consequently, for the ion conductivity of the polymer electrolyte. These properties make them promising candidates for polymer electrolytes in electrochromic devices. © 1996 John Wiley & Sons, Inc.     

Poly(ethylene glycol)-based shape-memory polymers

Poly(ethylene glycol) (PEG) blends photo-curable and thermal activated shape-memory polymers (SMPs), with different activation temperature (T_switch), have been synthesized and characterized. PEG blends with different molecular weights were chain-end functionalized with isocyanate ethyl methacrylate and photo-cured with UV lamp. Degree of cross-linking of the blend network, determined by gel content measurement, resulted as higher than 95%. The thermal and thermomechanical properties of these SMPs PEG blends were characterized by differential scanning calorimetry and dynamic mechanical analysis. The shape-memory properties of the networks were quantified using thermomechanical three-point bending experiments and showed strain fixity rates higher than 99% and a minimum strain recovery ratio of 82%.     

叶酸和聚乙二醇接枝作基因载体用壳聚糖的合成与表征

本研究将叶酸和聚乙二醇接枝到四种不同分子量的壳聚糖氨基侧链上,以改善壳聚糖的靶向性和水溶性作基因载体。用FTIE、1HNMR、UV-Vis、DSC和TEM对产物进行了表征,结果表明,叶酸和聚乙二醇被成功地接枝到壳聚糖上,所制得的载体有望作为潜在的肿瘤细胞靶向基因载体。     

Mechanically versatile isosorbide-based thermoplastic copolyether-esters with a poly(ethylene glycol) soft segment

Segmented thermoplastic copolyether esters (TPEE's) with a partially renewable hard block containing isosorbide (ISB) and poly(ethylene glycol) (PEG) soft blocks were prepared by melt polycondensation. A range of compositions was accessible despite the relatively low reactivity of the sterically and electronically hindered ISB monomer. The small-scale reactions performed in the melt were limited in terms of achievable molar mass. This is attributed to the challenge of attaining stoichiometric balance in the feed and maintaining this balance throughout the high temperature (>200°C) reactions. Nevertheless, products were isolated that could be manipulated and melt-pressed into specimen for tensile testing. Varying the feed compositions gave rise to copolymers exhibiting a broad range of mechanical properties (elastic modulus from 1–66 MPa). These characteristics are consistent with a segmented polymer architecture with morphological features similar to commercially available TPEE counterparts. These results pave the way for more responsibly sourced building blocks being incorporated into materials with high market value potential.     

Designing a hepatocellular microenvironment with protein microarraying and poly(ethylene glycol) photolithography

In this study, robotic protein printing was employed as a method for designing a cellular microenvironment. Protein printing proved to be an effective strategy for creating micropatterned co-cultures of primary rat hepatocytes and 3T3 fibroblasts. Collagen spots (ca. 170 microm in diameter) were printed onto amino-silane- and glutaraldehyde-modified glass slides. Groups of 15-20 hepatocytes attached to collagen regions in a highly selective manner forming cell clusters corresponding in size to the printed collagen domains. Fibroblasts, seeded onto the same surface, adhered and spread around arrays of hepatocyte islands creating a heterotypic environment. The co-cultured hepatocytes produced and maintained high levels of liver-specific biomarkers, albumin and urea, over the course of 2 weeks. In addition, protein printing was combined with poly(ethylene glycol) photolithography to define intercellular contacts within the clusters of hepatocytes residing on individual collagen islands. Glass slides, treated with 3-acryloxypropyl trichlorosilane and imprinted with 170 m diameter collagen spots, were micropatterned with a high-density array of 30 microm x 30 microm poly(ethylene glycol) (PEG) wells. As a result, discrete groups of ca. 9 PEG microwells became functionalized with the cell-adhesive ligand. When exposed to micropatterned surfaces, hepatocytes interacted exclusively with collagen-modified regions, attaching and becoming confined at a single-cell level within the hydrogel wells. Micropatterning strategies proposed here will lead to greater insights into hepatocellular behavior and will benefit the fields of hepatic tissue engineering and liver biology.     

Depolymerisation of poly(ethylene terephthalate) fibre wastes using ethylene glycol

Poly(ethylene terephthalate) [PET] fibre wastes from an industrial manufacturer was depolymerised using excess ethylene glycol [EG] in the presence of metal acetate as a transesterification catalyst. The glycolysis reactions were carried out at the boiling point of ethylene glycol under nitrogen atmosphere up to 10 h. Influences of the reaction time, volume of EG, catalysts and their concentrations on the yield of the glycolysis products were investigated. The glycolysis products were analysed for hydroxyl and acid values and identified by different techniques, such as HPLC, ¹H NMR and ¹³C NMR, mass spectra, and DSC. It was found that the glycolysis products consist mainly of bis(hydroxyethyl)terephthalate [BHET] monomer (>75%) which was effectively separated from dimer in quite pure crystalline form.