Phase behavior and properties of reverse vesicles in salt-free catanionic surfactant mixtures

Salt-free 1:1 cationic/anionic (catanionic) surfactant mixture tetradecyltrimethylammonium laurate (TTAL) could be prepared by mixing equimolar tetradecyltrimethylammonium hydroxide (TTAOH) and lauric acid (LA) in water. Given the condition of suitable range of weight fraction of TTAL in total surfactant, rho=WTTAL/(WTTAL+WLA), and at existence of a small amount of water, it was found that the mixtures of so-obtained TTAL and LA could spontaneously form stable reverse vesicles in various organic solvents including toluene, tert-butylbenzene, and cyclohexane. The reverse vesicle phase shows a blue color against room light and exhibits strong birefringence under polarized microscope. The reverse vesicles are very sensitive to temperature change. Increasing temperature could make the rho values within which reverse vesicles were constructed move to higher values. In organic solvents of alkanes such as n-heptane, reverse vesicles could still form but become unstable upon time and centrifugation. Increasing temperature could accelerate phase separation, and finally a gel-like bottom phase was usually observed. Interestingly, the stable reverse vesicles formed by so-called salt-free catanionic surfactant mixtures still show some resistance against adding inorganic salts. They can trap inorganic ions such as Zn2+ and S2- into their hydrophilic layers. This opens the door for template applications of reverse vesicles to prepare inorganic nanoparticles.     

Densely stacked multilamellar and oligovesicular vesicles, bilayer cylinders, and tubes joining with vesicles of a salt-free catanionic extractant and surfactant system

In the phase diagram of an excellent extractant of rare earth metal ions, di(2-ethylhexyl) phosphate (HDEHP, commercial name P204), mixing with a cationic trimethyltetradecylammonium hydroxide (TTAOH) in water, a birefringent Lalpha phase was found, which consists of densely stacked multilamellar vesicles. The densely stacked multilamellar vesicles are remarkably deformed, as observed by means of cryotransmission electron microscopy (cryo-TEM). Further, self-assembled structures-oligovesicular vesicles, bilayer cylinders, and tubes joining with vesicles-were also observed. The self-assembled phase is transparent, anisotropic, and highly viscous, possessing elastic properties determined by rheological measurements. This is the first time that birefringent Lalpha phase with remarkably deformed amphiphilic bilayer membranes has been constructed through combining a hydrophobic organic extractant having double chains with a water-soluble surfactant having a single chain, which may direct primarily toward acquiring an understanding of the mechanism of salt-free catanionic vesicles and secondarily to determine if vesicle-extraction technology utilizing extractants is possible.     

Stabilization of catanionic vesicles via polymerization

Polymerizable cationic surfactant methacryloyloxyoctyl trimethylammonium bromide (MOTB) and anionic surfactant sodium 4-(omega-methacryloyloxyoctyl)oxy benzene sulfonate (MOBS) were synthesized. Stable catanionic vesicles can spontaneously form upon mixing the two oppositely charged surfactants in aqueous solution, which was further permanently fixed by polymerization. Surface tensiometry, nuclear magnetic resonance (NMR), static and dynamic laser light scattering (LLS), and cryogenic transmission electron microscopy (cryo-TEM) were used in combination to characterize the catanionic vesicles before and after polymerization. The kinetics of formation and breakdown of unpolymerized catanionic vesicles were studied in detail employing stopped-flow light scattering. In contrast to unpolymerized vesicles, the polymerized ones exhibit permanent stability under external perturbations such as dilution or adding excess MOTB. A tentative explanation is proposed about why free radical polymerization can successfully fix the catanionic vesicles, the structure of which is well-known to be in dynamic equilibrium exchange with unimers.     

Unusual vesicle-micelle transitions in a salt-free catanionic surfactant: temperature and concentration effects

The spontaneous formation of vesicles by the salt-free surfactant hexadecyltrimethylammonium octylsulfonate (TASo) and the features of an unusual vesicle-micelle transition are investigated in this work. In a previous work, we have shown that this highly asymmetric catanionic surfactant displays a rare lamellar miscibility gap in the concentrated regime. Here, we analyze in detail the aggregation behavior in the dilute regime (less than 3 wt % surfactant) as a function of both concentration and temperature. The phase diagram is dominated by a two-phase region consisting of a dispersion of a swollen lamellar phase (Lalpha') in the excess solvent phase (L1). Stable vesicles form in this two-phase region, and upon temperature increase, a transition to a single solution phase containing only elongated micelles occurs. The structural characterization of the aggregates and the investigation of their equilibrium properties have been carried out by light microscopy, cryo-TEM, water self-diffusion NMR, and SANS. Similarly to the lamellar-lamellar coexistence, the changes in microstructure at high dilution and high temperature can be understood from solubility differences, electrostatic interactions, and preferred aggregate curvature. Surface charge in the aggregates stems from the higher solubility of the octylsulfonate (So-) ion as compared to that of the hexadecyltrimethylammonium ion (TA+). Upon temperature increase, the ratio of free So(-) relative to the neutral TASo increases. Consequently, the surface charge density of the aggregates increases, and this ultimately induces a transition to a higher-curvature morphology (elongated micelles). Vesicles can also be spontaneously formed by cooling solutions from the micellar region, and the mean size obtained is practically independent of cooling rate, suggesting that dissociation/charge effects also control this process.     

Silicone nanocapsules templated inside the membranes of catanionic vesicles

A simple and effective way to synthesize hollow silicone resin particles of controlled diameter is presented. The synthesis utilizes catanionic vesicles as templates for the polycondensation/polymerization processes of 1,3,5,7-tetramethylcyclotetrasiloxane (D4H) within their membranes. Two different surfactant systems were used to form the vesicular templates: mixtures of dodecyltrimethylammonium bromide (DTAB) and sodium dodecylbenzenesulfonate (SDBS) in the cationic (the DTAB/SDBS system) or anionic (the SDBS/DTAB system) rich region of the phase diagram. The templates obtained from these surfactant mixtures form spontaneously unilamellar vesicles in aqueous solution. The vesicular templates swell upon addition of D4H, thus increasing their size. The silicone resin was obtained in acid- or base-catalyzed polycondensation and ring-opening polymerization processes of D4H. In the case of the DTAB/SDBS system the formation of a densely cross-linked silicone material with SiO3/2 units allowed the nanocapsules to retain the vesicular shape after removal of the template, whereas in the SDBS/DTAB system, the polymer produces capsules which are too smooth to support surfactant lysis. The morphology of the silicone nanocapsules was analyzed using transmission electron microscopy (TEM) and, in some cases, atomic force microscopy (AFM). TEM and AFM reveal discrete hollow particles with a small amount of linked or aggregated hollow silica shells.     

Phase behavior of salt-free catanionic surfactant aqueous solutions with fullerene C60 solubilized

A salt-free catanionic surfactant system, tetradecyltrimethylammonium laurate (TTAL), was constructed by mixing tetradecyltrimethylammonium hydroxide (TTAOH) and lauric acid (LA). The H+ and OH- counterions form water (TTAOH+LA-->TTAL+H2O), leaving the solution salt-free. The phase behaviors at fixing the total surfactant concentration (cTTAL) to be 33.0 and 55.0 mmol L(-1), respectively, were studied through varying the molar ratio of r=nLA/nTTAOH from 0.70 to 1.20. With an increasing value of r, one observed an L1-region, an Lalpha/L1 two-phase region with a birefringent Lalpha-phase at the top, and finally a single Lalpha-phase. The ability to solubilize a fullerene mixture of C60 and C70 of different phases in different regions was tested. The colloidal stability and phase behavior of different phases with embedded fullerenes were investigated as a function of r, cTTAL, and weight ratio of fullerene to surfactant (WF/WTTAL). The 33.0 or 55.0 mmol L(-1) zero-charged vesicle-phase at r=1.00 could solubilize a considerable amount of fullerenes without macroscopic phase separation and obvious vesicular structure breakage. However, these colloidal solutions became unstable at lower concentrations of surfactants, and a precipitate would be observed at the bottom. The micellar (L1-phase) solubilization at the TTAOH-rich side was less pronounced compared to the vesicular solubilization of the zero-charged vesicle-phase, and the solubilizing ability decreased at higher r values. In the Lalpha/L1 two-phase region, a brown or dark-brown Lalpha-phase was usually found at the top of a colorless or yellowish L1-phase, indicating that most of the fullerenes were embedded in the upper Lalpha-phase. The influence of fullerene incorporation on the property of the zero-charged TTAL vesicle-phase was also investigated, and evidence has been found that the system tended to be more fluid after fullerenes were incorporated into the hydrophobic microdomains of aggregates.     

Aggregation behavior and adsorption properties of salt-free catanionic surfactant mixtures containing tetradecyltrimethyl ammonium salts

The aggregation behavior of salt-free catanionic surfactants, tetradecyltrimethyl ammonium hydroxide (TTAOH)/fatty acid (FA) including octanoic acid (OA), decylic acid (DA) and lauric acid (LA) in aqueous solutions were studied. The critical micelle concentration(cmc), surface tension at cmc (γ_cmc), surface excess (Г_max), mean molecular surface area (A_min), adsorption efficiency (pc₂₀) and surface tension reduction effectiveness (π_cmc) were obtained from surface tension isotherms. The influence of temperature on the surface tension of salt-free TTAOH/FA (TTAOF) systems was investigated. Data of adsorption dynamics indicated that at fixed adsorption time, the order of adsorption capacity was TTAOH?相似文献   

Lamellar gels and spontaneous vesicles in catanionic surfactant mixtures

Caillé analysis of the small-angle X-ray line shape of the lamellar phase of 7:3 wt/wt cetyltrimethylammonium tosylate (CTAT)/sodium dodecylbenzene sulfonate (SDBS) bilayers shows that the bending elastic constant is kappa = (0.62 +/- 0.09)k(B)T. From this and previous results, the Gaussian curvature constant is kappa = (-0.9 +/- 0.2)k(B)T. For 13:7 wt/wt CTAT/SDBS bilayers, the measured bending elasticity decreases with increasing water dilution, in good agreement with predictions based on renormalization theory, giving kappa(o) = 0.28k(B)T. These results show that surfactant mixing is sufficient to make kappa approximately k(B)T, which promotes strong, Helfrich-type repulsion between bilayers that can dominate the van der Waals attraction. These are necessary conditions for spontaneous vesicles to be equilibrium structures. The measurements of the bending elasticity are confirmed by the transition of the lamellar phase of CTAT/SDBS from a turbid, viscoelastic gel to a translucent fluid as the water fraction is decreased below 40 wt %. Freeze-fracture electron microscopy shows that the gel is characterized by spherulite defects made possible by spontaneous bilayer curvature and low bending elasticity. This lamellar gel phase is common to a number of catanionic surfactant mixtures, suggesting that low bending elasticity and spontaneous curvature are typical of these mixtures that form spontaneous vesicles.     

Gelation of spontaneously formed catanionic vesicles by water soluble polymers

The gelation of two spontaneously formed charged catanionic vesicles by four water soluble polymers was systematically studied by tube inversion method and rheology. Eight phase maps were successfully documented for the catanionic vesicle–polymer mixtures. The experimental results, as represented by the relaxation time and the storage modulus at 1 Hz, revealed that the catanionic vesicle–polymer interactions at play were of electrostatic and hydrophobic origin. Firstly, no association between charged catanionic vesicles and the polymer without charge/hydrophobic modification was observed due to lack of both electrostatic and hydrophobic effects. Secondly, hydrophobic interactions accounted for the association between the hydrophobically modified polymer without charge and charged catanionic vesicles with hydrophobic grafts of the polymer inserting in the catanionic vesicle bilayer. Thirdly, the positively charged polymer without hydrophobic modification could interact with negatively charged catanionic vesicles through electrostatic force on one hand but could not interact with positively charged catanionic vesicles on the other hand. Finally, the positively charged polymer with hydrophobic modification could interact both electrostatically and hydrophobically with negatively charged catanionic vesicles, resulting in the formation of strong gels. The hydrophobic interaction might even overcome the unfavorable electrostatic interaction between the positively charged vesicles and the polymer with positive charge/hydrophobic modification.     

Highly efficient capture and long-term encapsulation of dye by catanionic surfactant vesicles

Vesicles formed from the cationic surfactant, cetyltrimethylammonium tosylate (CTAT) and the anionic surfactant, sodium dodecylbenzenesulfonate (SDBS), were used to sequester the anionic dye carboxyfluorescein. Carboxyfluorescein was efficiently sequestered in CTAT-rich vesicles via two mechanisms: encapsulation in the inner water pool and electrostatic adsorption to the charged bilayer. The apparent encapsulation efficiency (22%) includes both encapsulated and adsorbed fractions. Entrapment of carboxyfluorescein by SDBS-rich vesicles was not observed. Results show the permeability of the catanionic membrane is an order of magnitude lower than that of phosphatidylcholine vesicles and the loading capacity is more than 10 times greater.     

Cosolvent effects on the stability of catanionic vesicles formed from ion-pair amphiphiles

Four ion-pair amphiphiles (IPAs), derived from the pairing of alkyltrimethylammonium chlorides and sodium alkyl sulfates, were used to form catanionic vesicles in water upon the mechanical dispersion method. For the first time in the literature, short-chained alcohols (methanol, ethanol, 1-propanol, and 1-butanol) were added as cosolvents at a variety of concentrations and systematically studied for their effects on the stability of the ensuing vesicles. Dynamic light scattering measurements indicated that vesicles formed from one of the IPAs (i.e., dodecyltrimethylammonium dodecyl sulfate) could be efficiently and successfully stabilized by the addition of appropriate amounts of 1-propanol and 1-butanol. Maximum lifetimes of more than 1 year and 132 days for stable vesicles in 5% 1-butanol and 15% 1-propanol solutions, respectively, were observed, and this demonstrates that a novel method for the stabilization of catanionic vesicles formed from IPAs becomes available by means of cosolvent addition. Furthermore, the stability of catanionic vesicles was found to be strongly dependent on cosolvent concentration. In general, the vesicle stability increased with increasing the cosolvent concentration, reached a maximum at a specific concentration, and thereafter decreased with further increasing the concentration. The vesicles finally disintegrated into constituent molecules in solutions of high cosolvent concentrations. An explanation of cosolvent effects based on the medium dielectric constant was proposed.     

Mechanisms behind the faceting of catanionic vesicles by polycations: chain crystallization and segregation

Vesicles composed of an anionic and a cationic surfactant, with a net negative charge, associate strongly with a hydrophobically modified polycation (LM200) and with an unmodified polycation with higher charge density (JR400), forming viscoelastic gel-like structures. Calorimetric results show that in these gels, LM200 induces a rise of the chain melting temperature (Tm) of the vesicles, whereas JR400 has the opposite effect. For both polymer-vesicle systems, the shear viscosity exhibits an inflection point at Tm, and for the LM200 system the measured relaxation times are significantly higher below Tm. The neat vesicles and the polycation-bound vesicles have a polygonal-like faceted shape when the surfactant chains in the bilayer are crystallized, as probed by cryo-transmission electron microscopy. Above Tm, the neat and the LM200-bound vesicles regain a spheroidal shape, whereas those in the JR400 system remain with a deformed faceted shape even above Tm. These shape changes are interpreted in terms of different mechanisms for the polymer-vesicle interaction, which seem to be highly dependent on polymer architecture, namely charge density and hydrophobic modification. A crystallization-segregation mechanism is proposed for the LM200-vesicle system, while, for the JR400-vesicle one, charge polarization-lateral segregation effects induced by the polycation in the catanionic bilayer are envisaged.     

Cytotoxicity characterization of catanionic vesicles in RAW 264.7 murine macrophage-like cells

In comparison with cationic liposomes, catanionic vesicles possess more attractive properties such as stability and lower cost, and these characteristics may make them suitable as a non-viral vehicle and for other biomedical applications such as vaccine adjuvants. However, very little is known about their possible cytotoxic mechanisms in cellular system. Also, this information is vital for the future development of safe biomedical systems. In the current study, the cytotoxic effect of catanionic vesicles, consisting of anionic surfactant (SDS), cationic surfactant (HTMAB), and cholesterol, in cultured RAW 264.7 murine macrophage-like cells was determined. The treatment of catanionic vesicles produced a dose-dependent effect on macrophage cells. RAW 264.7 cells exposed to catanionic vesicles exhibited morphological features of apoptosis such as chromatin condensation. Typical apoptotic ladders were observed in DNA extracted from RAW 264.7 cells treated by catanionic vesicles. Analysis from flow cytometry demonstrated an increase of hypodiploid DNA population (sub-G1) and a simultaneous decrease of diploid DNA content, indicating that DNA cleavage occurred after exposure of the cells with catanionic vesicles. In addition, it was shown that pretreatment of RAW 264.7 cells with the general caspase inhibitor (zVAD-fmk) did not prevent apoptosis induced by catanionic vesicles, suggesting that apoptosis in macrophage cells followed a caspase-independent pathway induced by catanionic vesicles. These data provide novel insight into the effect of catanionic vesicles on the mechanisms of cell death induced by catanionic vesicles.     

Phase behavior and rheological properties of a salt-free catanionic surfactant TTAOH/LA/H2O system

Conventional cationic and anionic (catanionic) surfactant mixtures tend to form precipitates at the mixing molar ratio of the cationic and anionic surfactant of 1:1 because of the excess salt formed by their counterions. By using OH- and H+ as the counterions, however, excess salt can be eliminated, and salt-free catanionic systems can be obtained. Here, we report the detailed phase behavior and rheological properties of salt-free catanionic surfactant system of tetradecyltrimethylammonium hydroxide (TTAOH)/lauric acid (LA)/H2O. With the variation of mixing molar ratio of LA to TTAOH (rho=nLA/nTTAOH), the system exhibits much richer phase behavior induced by growth and transition of aggregates. Correspondingly, the rheological property of the system changes significantly. Take the series of samples with fixed total surfactant concentration (cT) to be 15 mg.mL(-1), the system only forms a low viscous L 1 phase with a Newton fluid character at the TTAOH-rich side. With increasing rho, first a shear-thickening L1 phase region is observed at 0.70or=1.05, and finally, at rho>or=1.13, the excess LA will separate from the bulk solution and form a white top layer. Investigations were also carried out by varying c T at fixed rho and by changing temperature, respectively. It was found micelle growth would be greatly suppressed at higher temperatures. However, the vesicle phases showed a considerable resistance against temperature rise.     

Phase behavior and rheological properties of salt-free catanionic TTAOH/DA/H2O system in the presence of hydrophilic and hydrophobic salts

In the cationic and anionic (catanionic) surfactant mixed system, tetradecyltrimethylammonium hydroxide (TTAOH)/decanoic acid (DA)/H(2)O, abundant phase behaviors were obtained in the presence of hydrophilic and hydrophobic salts. The microstructures of typical L(α) phases with the different compositions were characterized by the transmission electron microscope (TEM) images. Aqueous double-phase transition induced by addition of hydrophilic salts was observed when the cationic surfactant was in excess. Salt-induced reversible vesicle phases could be obtained when the anionic surfactant was excess, whereas the vesicle phase at lower salinity behaves highly viscoelastic but is much less viscoelastic with high salinity which was demonstrated by measuring their rheological properties. The L(α) phase with the positive membrane charges can be finally transferred into an L(1) phase with added salts. The ion specificity of hydrophilic and hydrophobic salts is discussed, and the order of cations is summarized, which is significant for the further study of the Hofmeister effects on catanionic surfactant mixed systems.     

Flow cytometric characterization of interactions between U-937 human macrophages and positively charged catanionic vesicles

Catanionic vesicles are considered a potential alternative to liposomes for drug delivery systems because of their greater stability and lower cost. Before using catanionic vesicles in vivo, their interactions with macrophages must be fully understood because they are primarily removed from circulation by the macrophages of the mononuclear phagocyte system. Using flow cytometry, we examined the intracellular responses-reactive oxygen species (ROS) content, mitochondrial membrane potential, cell size and complexity, and cell cycle profiles-in U-937 human macrophages treated with positively charged catanionic vesicles. Kinetic hydrogen peroxide production initially increased at lower concentrations (4-10nM) but declined at higher concentrations (40 nM and 80 nM) over the entire incubation period. Superoxide content generation, however, increased over the entire concentration range and incubation period. Catanionic vesicles decreased mitochondrial membrane potential for every concentration after 4h of incubation but caused a significant fluctuation in mitochondrial membrane potential at 6h. After 6h of incubation, catanionic vesicles produced more changes in cell size and complexity than after 4h. The increase in the subG1 population of cells treated with catanionic vesicles at higher doses indicated that apoptosis progressed. Positively charged catanionic vesicles induced different activated patterns of ROS generation and changes in mitochondrial membrane potential than did cationic liposomes. The nature of the interactions between macrophages and catanionic vesicles is of great importance for the design of safer and more effective delivery systems for macrophages. Our findings contribute to a better understanding of the molecular action of catanionic vesicles in the cellular system.     

Molecular dynamics study of catanionic bilayers composed of ion pair amphiphile with double-tailed cationic surfactant

The physical stability of catanionic vesicles is important for the development of novel drug or DNA carriers. For investigating the mechanism by which catanionic vesicles are stabilized, molecular dynamics (MD) simulation is an attractive approach that provides microscopic structural information on the vesicular bilayer. In this study, MD simulation was applied to investigate the bilayer properties of catanionic vesicles composed of an ion pair amphiphile (IPA), hexadecyltrimethylammonium-dodecylsulfate (HTMA-DS), and a double-tailed cationic surfactant, ditetradecyldimethylammonium chloride (DTDAC). Structural information regarding membrane elasticity and the organization and conformation of surfactant molecules was obtained based on the resulting trajectory. Simulation results showed that a proper amount of DTDAC could be used to complement the asymmetric structure between HTMA and DS, resulting in an ordered hydrocarbon chain packing within the rigid membrane observed in the mixed HTMA-DS/DTDAC system. The coexistence of gel and fluid phases was also observed in the presence of excess DTDAC. MD simulation results agreed well with results obtained from experimental studies examining mixed HTMA-DS/DTDAB vesicles.     

Spontaneous formation of vesicles and dispersed cubic and hexagonal particles in amino acid-based catanionic surfactant systems

Mixed catanionic surfactant systems based on amino acids were investigated with respect to the formation of liquid crystal dispersions and the stability of the dispersions. The surfactants used were arginine-N-lauroyl amide dihydrochloride (ALA) and N(alpha)-lauroyl-arginine-methyl ester hydrochloride (LAM), which are arginine-based cationic surfactants; sodium hydrogenated tallow glutamate (HS), a glutamic-based anionic surfactant; and the anionic surfactants sodium octyl sulfate (SOS) and sodium cetyl sulfate (SCS). It is demonstrated that in certain ranges of composition there is a spontaneous formation of vesicular, cubic, and hexagonal structures. The solutions were characterized with respect to internal structure and size by cryogenic transmission electron microscopy (cryo-TEM), dynamic light scattering (DLS), and turbidity measurements. Vesicles formed spontaneously and were found for all systems studied; their size distribution is presented for the systems ALA/SCS/W and ALA/SOS/W; they are all markedly polydisperse. The aging process for the system ALA/SOS/W was monitored both by turbidity and by cryo-TEM imaging; the size distribution profile for the system becomes narrower and the number average radius decreases with time. The presence of dispersed particles with internal cubic structure (cubosomes) and internal hexagonal structure (hexosomes) was documented for the systems containing ALA and HS. The particles formed spontaneously and remained stably dispersed in solution; no stabilizer was required. (Cubosome and hexosome are USPTO registered trademarks of Camurus AB, Sweden.) The spontaneous formation of particles and their stability, together with favorable biological responses, suggests a number of applications.