荧光法和色谱法测定对-二甲氨甲基杯[8]芳烃与二苯胺磺酸钠的包结常数

分子识别是生物识别的基础，其机理的研究对理解生命现象具有重要意义。水溶性杯芳烃是研究分子识别的重要主体分子，本实验报道合成了水溶性的5，11，17，23，29，35，41，47-八(N，N-二甲氨甲基)-杯[8]芳烃(以下简称杯胺)，采用荧光法测定了其与二苯胺磺酸钠的包结常数，研究了包结作用。以杯胺为流动相添加剂，二苯胺磺酸钠为溶质，采用色谱法进行了对比研究，结论相符。     

以羟丙基-β-环糊精为手性添加剂拆分2-取代芳基丙酸:取代基对手性识别的影响（英文）

以羟丙基-β-环糊精为手性添加剂,采用反相高效液相色谱法对2-取代芳基丙酸类物质进行了手性拆分。考察了流动相的组成,包括缓冲溶液、有机改性剂以及添加剂的浓度等。缓冲溶液的pH值、有机改性剂的种类与浓度,以及添加剂的浓度对色谱峰的保留时间和分离度均有较大的影响。以YMC ODS-C_(18)(150 mm×4.6 mm,5μm)为色谱柱,乙腈-0.10 mol/L磷酸盐缓冲液(pH 3.3,含25 mmol/L添加剂)为流动相,测定了各2-取代芳基丙酸与羟丙基-β-环糊精的包结常数,考察了羟丙基-β-环糊精对各物质的包结形式。实验结果表明,羟丙基-β-环糊精与各对映体均以1∶1的形式包结,同时发现推电子取代基更有利于羟丙基-β-环糊精的包结行为,为羟丙基-β-环糊精对手性拆分的影响提供了一个有利的参考因素。     

姜黄素键合硅胶固定相HPLC分离水溶性维生素和核苷

以ODS为参比,研究了5种水溶性维生素和5种核苷在姜黄素键合硅胶固定相(CCSP)上的色谱行为,考察了甲醇、流动相pH和离子强度对CCSP分离这类极性化合物的影响,探讨了该新固定相的色谱保留机理。结果表明,在V(甲醇)∶V(0.01 mol/L NaH2PO4)=40∶60(pH 3.5)流动相体系中,5种水溶性维生素在CCSP上实现较好分离;核苷的分离则是在以纯水为流动相的条件下实现的。与ODS柱相比,在相同条件下,CCSP对5种水溶性维生素具有较高的选择性,洗脱顺序与ODS具有显著差异,且保留明显比ODS强(B6除外);与此相反,相同色谱条件下,CCSP对核苷的保留比ODS弱,CCSP可实现核苷的简便有效分离,同时胸苷与黄苷的洗脱顺序也与ODS不同。以上说明不同保留机理的存在,CCSP具有典型的反相色谱特征,但疏水性比ODS弱;极性的配体使CCSP在对溶质的分离分析中除疏水作用外,还存在n-π和π-π作用、氢键作用、偶极-偶极等作用;协同作用的结果使CCSP在水溶性极性化合物的分离分析中显示出优势。     

丁基胺丙基硅胶毛细管整体柱的制备及其电色谱性能研究

采用溶胶-凝胶技术制备了丁基胺丙基硅胶毛细管整体柱,此整体固定相表面同时含有能产生阳极的电渗流的仲胺官能团和产生疏水作用的正丁基和丙基官能团。对所制备的整体柱电色谱性能进行了详细的表征和分析。考察了流动相pH值对电渗流的影响;对烷基苯同系物、有机酸酸性化合物和苯胺类碱性化合物保留行为进行了研究,并对其可能的保留机理进行了探讨。实验结果表明,对于中性化合物的保留机理主要基于反相作用;而对于酸性化合物的保留行为则是基于混合模式作用机理,即除了电泳作用外,还包括阴离子交换和疏水作用。碱性化合物在丁基胺丙基硅胶毛细管整体柱上的峰形较好,没有明显的峰拖尾现象。     

三维荧光光谱法连续测定苯胺、二苯胺和N-甲基苯胺

本文比较了苯胺、二苯胺、N-甲基苯胺的二维荧光光谱和三维荧光光谱。提出了同时测定苯胺,二苯胺和N甲基苯胺的分析方法,它们的浓度分别在2.0×10~(-7)～5.0×10~(-6)mol/L,9.0×10~(-8)～7.4×10~(-6)mol/L,1.3×10~(-7)～2.0×10~(-8)mol/L范围内有良好的线性关系,检出限为1.0×10~(-7)mol/L,8.0×10~(-9)mol/L,1.0×10~(-7)mol/L.相对标准偏差分别为5％,7％,7％.此方法用于混合样品和工业废水的分析,获得较满意的结果.     

对-叔丁基杯［6］芳烃键合固定相的制备和评价

合成了对-叔丁基杯［6］芳烃高效液相色谱键合固定相,考察了多环芳烃、硝基苯胺位置异构体、邻苯二甲酸酯及苯的单官能团取代化合物的反相液相色谱保留行为。发现该键合相具有明显的反相特征,对位置异构体的分离优于C18柱,并讨论了可能的分离机理。     

磺化杯芳烃修饰的金纳米粒的合成及其对多环芳烃的比色检测

通过偶联修饰的方法合成了水溶性磺化杯芳烃修饰的金纳米粒, 并研了其对多环芳烃的比色检测. 结果表明, 磺化杯芳烃修饰的金纳米粒对蒽具有良好的识别选择性. 该比色探针对蒽的检测限可达到2×10-6 mol/L. 这种比色传感器能够实现现场原位检测.     

对-叔丁基杯[4]芳烃键合固定相的制备及表征

合成了对一叔丁基杯[4]芳烃高效液相色谱键合固定相，分离了多环芳烃、硝基苯胺位置异构体、苯甲酸酯、邻苯二甲酸酯和苯的单官能团化合物；比较了在不同的流动相中分析物的保留行为，发现该键合相具有明显的反相特征，对位置异构体的分离优于C18柱，并讨论了可能的分离机理。     

用C60键合硅胶固定相液相色谱分离杯芳烃及杯芳冠醚类化合物

以自合成的C60 键合硅胶液相色谱固定相 ,分别选用3种不同选择性的流动相体系 :异丙醇 -环己烷 ,氯仿 -环己烷和二氯甲烷 -环己烷 ,考察了流动相组成对杯芳烃及杯芳冠醚化合物保留行为和分离选择性的影响。在一定的流动相条件下溶质能得到较好分离。     

水溶液中对磺酸钠杯[8]芳烃醚与芘间的相互作用

用荧光法研究了一个长链水溶性杯芳烃醚-十二烷基对磺酸钠杯[8]芳烃醚与芘在水溶液中的相互作用,以及盐氯化钠和共溶剂甲醇对此作用的影响。结果表明:芘进入了此杯芳烃醚的疏水孔穴形成了包合物;其复合常数和短链对磺酸钠杯芳烃醚的复合常数相近,但其疏水孔穴的非极性明显加大;且在盐及甲醇浓度较小时,它们对上述相互作用及复合常数的影响都不大。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.