Investigation of the interactions in emulsions stabilized by a polymeric surfactant and its mixtures with an anionic surfactant

 The interaction of a nonionic polymeric surfactant with an anionic surfactant at the oil–water interface has been studied by its effects on the droplet size, stability and rheology of emulsions. Oil-in-water (o/w) emulsions were prepared using isoparaffinic oil and mixtures of a nonionic polymeric surfactant with an anionic surfactant. The macro-molecular surfactant was a graft copolymer with a backbone of polymethyl methacrylate and grafted polyethylene oxide (a graft copolymer with PEO chains of MW=750). The anionic surfactant was sodium dodecyl sulfate (SDS). The stabiliza-tion of the emulsion droplets was found to be different when using one or the other surfactant. The mechanism of stabilization of emulsion droplets by the macro-molecular surfactant is of the steric type while the stabilization by anionic surfactant is of the electrostatic repulsion type. Emulsions stabilized with mixtures present both types of stabilization. Other effects on the preparation and stabilization of emulsions were found to be dependent on properties associated with the surfactant molecular weight such as the Marangoni effect and Gibbs elasticity. The initial droplet size of the emulsions showed a synergistic effect of the surfactant combination, showing a minimum for the mixtures compared to the pure components. Emulsion stability also shows a synergistic interaction of both surfactants. Rheological measurements allow for the estimation of the interparticle interaction when measured as a function of volume fraction. Most of the effects observed can be attributed to the differences in interfacial tension and droplet radius produced by both surfactants and their mixtures. The elastic moduli are well explained on the basis of droplet deformation. Ionic versus steric stabilization produce little difference in the observed rheology, the only important differences observed concerned the extent of the linear viscoelasticity region. Received: 22 November 1996 Accepted: 24 March 1997     

Investigations into the electrical and coalescence behaviour of water-in-crude oil emulsions in high voltage gradients

The stability of water-in-crude oil emulsions when subjected to high voltage electric fields depends on the nature of the crude oil and the presence of chemical additives. Optical microscopy, conductivity and coalescence measurements have revealed two distinct types of behaviour, designated type I and type II. These are shown to be related to the crude oil/water interfacial rheological properties. For incompressible crude oil/water films, droplet—droplet coalescence is hindered and chains of water droplets are established. These increase the electrical conductivity of the emulsion (type I behaviour). On the other hand, efficient droplet—droplet coalescence accompanied by minimal conduction occurs in electric fields if the interfacial film is compressible (type II).     

剪切场下两亲性棒状粒子对聚异丁烯/聚二甲基硅氧烷共混物相形态的影响

合成了具有两亲表面性质的棒状SiO₂粒子,借助共聚焦激光扫描显微镜研究了两亲性棒状SiO₂粒子在共混物中的选择性分布,并通过在线剪切-显微技术和流变技术研究了其对聚异丁烯/聚二甲基硅氧烷（PIB/PDMS）不相容共混物形态结构的影响.研究表明,两亲性棒状SiO₂粒子倾向于分布在两相界面处及PIB相中.分散相的剪切诱导凝聚行为强烈依赖于粒子的含量和共混物的组成比.少量两亲性SiO₂粒子会促进分散相的凝聚,而加入足够量的粒子则能抑制分散相凝聚.     

Shear-induced coalescence of emulsified oil drops

Crude oil droplets, when suspended in water, possess negative surface charges which give rise to double-layer repulsive forces between the drops. According to conventional DLVO theory, the magnitude of this repulsion (based on the measured zeta potential) is more than sufficient to prevent coalescence of the droplets. Indeed, when two such droplets were brought together on direct (i.e., "head-on") approach, coalescence was rarely observed. Upon oblique approach, however, the same droplets were seen to coalesce readily. An oblique encounter must necessarily give rise to lateral relative motion-or shearing-between the droplet surfaces. It is speculated that, if the charge distributions at the droplet surfaces were heterogeneous, lateral shearing would facilitate many encounters between surface patches of different zeta potentials across the intervening water film. If the repulsion across any local region were sufficiently weak to allow formation of an oil bridge across the water film, coalescence of the drops would follow inevitably. With the hypothesis of surface heterogeneity, it is not necessary to invoke any additional colloidal interactions (such as "hydrophobic forces") to account for the observed droplet-droplet coalescence. This finding may have important implications for the underlying mechanisms of emulsion stability in general and the commercial extraction of bitumen from oil sands in particular.     

Oil-in-water emulsions stabilized by hydrophobically modified hydroxyethyl cellulose: adsorption and thickening effect

The preparation and stability of oil-in-water emulsions stabilized by hydrophobically modified hydroxyethyl cellulose (HMHEC) were investigated. The rheological measurements of aqueous HMHEC were studied. It was found that HMHEC showed much better thickening ability than the parent (HEC) from which it was derived, which is caused by the association of the hydrophobic alkyl chains, which are absent in HEC. The oscillatory experimental results of the emulsions showed that at higher concentrations, HMHEC could form an elastic gel, which has good thixotropic properties. The stability and droplet size distribution were investigated by visual observation, photomicrograph and a laser-scattering particle size distribution analyzer. The adsorption of HMHEC at the oil-water interface and the surface of emulsion droplets due to the penetration of the alkyl chains in HMHEC into the oil phase were confirmed by visual observation, the interfacial tension method and an in situ environmental scanning electron microscope (ESEM). The stability of emulsions prepared using HMHEC is based on both an associative thickening mechanism caused by alkyl chains in HMHEC and the adsorption of HMHEC at the oil-water interface, which can form a solid film preventing coalescence of the droplets.     

Novel Oil‐in‐Water Emulsions Stabilised by Ionic Surfactant and Similarly Charged Nanoparticles at Very Low Concentrations

Novel oil‐in‐water (O/W) emulsions are prepared which are stabilised by a cationic surfactant in combination with similarly charged alumina nanoparticles at concentrations as low as 10^?5 m and 10^?4 wt %, respectively. The surfactant molecules adsorb at the oil‐water interface to reduce the interfacial tension and endow droplets with charge ensuring electrical repulsion between them, whereas the charged particles are dispersed in the aqueous films between droplets retaining thick lamellae, reducing water drainage and hindering flocculation and coalescence of droplets. This stabilization mechanism is universal as it occurs with different oils (alkanes, aromatic hydrocarbons and triglycerides) and in mixtures of anionic surfactant and negatively charged nanoparticles. Further, such emulsions can be switched between stable and unstable by addition of an equimolar amount of oppositely charged surfactant which forms ion pairs with the original surfactant destroying the repulsion between droplets.     

Studies on droplet size distributions during coalescence in immiscible polymer blends filled with silica nanoparticles

The effect of silica nanoparticles on the morphology of （10/90 wt%） PDMS/PBD blends during the shear induced coalescence of droplets of the minor phase at low shear rate was investigated systematically in situ by using an optical shear technique. Two blending procedures were used： silica nanoparticles were introduced to the blends by pre-blending silica particles first in PDMS dispersed phase （procedure 1） or in PBD matrix phase （procedure 2）. Bimodal or unimodal droplet size distributions were observed for the filled blends during coalescence, which depend not so much on the surface characteristics of silica but mainly on blending procedure. For pure （10/90 wt%） PDMS/PBD blend, the droplet size distribution exhibits bimodality during the early coalescence. When silica nanoparticles （hydrophobic and hydrophilic） were added to the blends with procedure l, bimodal droplet size distributions disappear and unimodal droplet size distributions can be maintained during coalescence; the shape of the different peaks is invariably Gaussian. Simultaneously, coalescence of the PDMS droplets was suppressed efficiently by the silica nanoparticles. It was proposed that with this blending procedure the nanoparticles should be mainly kinetically trapped at the interface or in the PDMS dispersed phase, which provides an efficient steric barrier against coalescence of the PDMS dispersed phase. However, bimodal droplet size distributions in the early stage of coalescence still occur when incorporating silica nanoparticles into the blends with procedure 2, and then coalescence of the PDMS droplets cannot be suppressed efficiently by the silica nanoparticles. It was proposed that with this blending protocol the nanoparticles should be mainly located in the PBD matrix phase, which leads to an inefficient steric barrier against coalescence of the PDMS dispersed phase; thus the morphology evolution in these filled blends is similar to that in pure blend and bimodal droplet size distributions can be observed during the early coalescence. These results imply that exploiting non-equilibrium processes by varying preparation protocol may provide an elegant route to regulate the temporal morphology of the filled blends during coalescence.     

PBD/PDMS共混物分散相的聚并捕获行为

借助显微-剪切装置在线研究了低速剪切场下SiO2纳米粒子含量、分散相聚丁二烯(PBD)浓度和剪切速率对PBD/聚二甲基硅氧烷(PDMS)不相容体系中聚并捕获行为的影响.结果表明,聚并捕获所形成的液滴尺寸与形状规整度由粒子含量、分散相浓度和剪切速率等因素共同决定.在较低的SiO2纳米粒子含量或较高的分散相浓度下,PBD液滴在低剪切场下发生聚并捕获,形成尺寸较大、形状不规则的液滴.增加SiO2纳米粒子含量或减小分散相浓度,能够减小分散相的尺寸并提高分散相的规整度.增加剪切速率能有效地减小分散相的尺寸并提高分散相的规整度.     

Influence of pH on the stability of oil-in-water emulsions stabilized by a splittable surfactant

A laboratory study was conducted to evaluate the effect of pH on the stability of oil-in-water emulsions stabilized by a commercial splittable surfactant Triton SP-190 by comparison with the results obtained by a common surfactant Triton X-100. The emulsion stability was explored by measuring the volume of oil phase separated and the size of the dispersed droplets. It was found that the addition of inorganic acids did not significantly affect the stability of emulsions stabilized by Triton X-100, but had a profound influence on the stability of emulsions stabilized by Triton SP-190. Moreover, the droplet size of a Triton X-100-stabilized emulsion and its dynamic interfacial activity were insensitive to acids. However, at lower pH the droplet size of the emulsions stabilized by Triton SP-190 was considerably increased. From the dynamic interfacial tension measurements the dynamic interfacial activity of Triton SP-190 at the oil/water interface was found to be strongly inhibited by the addition of acids, resulting in a slower decreasing rate of dynamic interfacial tension. The results demonstrate that the dramatic destabilization of Triton SP-190-stabilized emulsions could be realized by the use of acids, which evidently changed the interfacial properties of the surfactant and resulted in a higher coalescence rate of oil droplets.     

In Situ Generated Janus Fabrics for the Rapid and Efficient Separation of Oil from Oil‐in‐Water Emulsions

A cotton fabric was coated with a polymer that contains both poly(dimethyl siloxane) (PDMS) and poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA). When the repeat unit number of PDMS is about three‐fold that of PDMAEMA and the fabric is exposed to air, the fabric is superhydrophobic because PDMS in the coating covers the PDMAEMA chains. Upon contact with an oil‐in‐water emulsion, the water‐soluble PDMAEMA rises to the top and the side in contact with the emulsion becomes hydrophilic. The emerged PDMAEMA chains then cause the emulsion droplets to coagulate, and the aggregated oil fills the pores on the superhydrophobic side of the fabric. The oil‐impregnated side remains hydrophobic even upon prolonged contact with water. Thus, a Janus fabric is elegantly generated in situ and sustained. This easy‐to‐prepare Janus fabric rapidly and efficiently separates oil from emulsions and may find practical applications.     

Selective membrane test for crude oil based model emulsions by use of video-enhanced microscopy

 A method for testing water/oil emulsion droplet membranes selectively has been demonstrated. The method uses electric fields to induce attraction, membrane thinning and coalescence between aqueous droplets deposited in an oil continuum. The coalescence process is monitored visually by the use of videomicroscopy. A set of model oils containing indigenous surfactants (asphaltenes) from a crude oil has been studied, and the effects of asphaltene concentration, oil phase aromaticity, aging of oils and interfacial exposure time have been investigated. The strength of the field at the point of coalescence is defined as the critical parameter describing membrane strength. In the current experiments a.c. fields were used and droplet sizes were of the order of 500–600 μm. Received: 8 October 1998 Accepted in revised form: 11 January 1999     

SiO2纳米颗粒与聚氧乙烯对Pickering乳液的协同稳定作用简

研究了聚氧乙烯(PEO)与SiO2纳米颗粒对水/二甲苯体系Pickering乳液的协同稳定作用. 实验发现,PEO的存在减小了乳液液滴的平均直径,抑制了乳液的相反转,有效阻止了乳液的熟化,使乳液具有更好的稳定性. 进一步对纳米颗粒膜的流变性质进行研究,结果表明,PEO高分子促进了纳米颗粒形成更大尺寸的聚集结构,提高了其在界面上的吸附性,增强了颗粒膜的力学性能,在较小颗粒用量条件下使得Gibbs稳定性判据得到满足.     

Emulsifying properties of acylated rapeseed (Brassica napus L.) peptides

A peptide fraction having an average size of 5.6 amino acids has been purified from a rapeseed hydrolyzate, acylated using C(10)-C(14) acyl chlorides, and the surface tension values at the air-water interface and emulsifying properties studied. As compared with standard surface-active proteins, such as bovine serum albumin (BSA), and with detergents such as sodium dodecyl sulfate (SDS), acylated peptides exhibited particular surface characteristics. The surface tension at air-water interface of acylated peptides ranged from 29.1 to 37.8 mN/m at equilibrium; these values were considerably lower than those for BSA and closer those for SDS, suggesting that acylated peptides pack at the air-water interface more like detergents than like proteins. The adsorption of acylated peptides to the oil-water interface was slower than for SDS or BSA, as deduced from the rather large size of oil droplets in emulsions (31-17 microm). Consequently, these emulsions creamed extensively during aging. Nevertheless, emulsions generated from acylated peptides were in general more stable to phase separation than those prepared from SDS. The C(14) acylated peptides were more effective for generating emulsions than the C(10) and C(12) derivatives, especially concerning the stability of emulsions against coalescence and phase separation, which was better than SDS and close to BSA.     

A study of oil droplet coalescence

Oil droplets dispersed in water can be readily studied when they are coated with surfactants, which lower their interfacial tension and enhance their stability. Pure oil droplets are more difficult to study because of their high interfacial tension, which facilitates coalescence and the adsorption of contaminants. In this study, we have characterised the surface charging properties of a water insoluble oil, bromododecane, which has a density close to water. The small density difference allows us to study relatively large drops of this oil and to analyse its coalescence behaviour. The results obtained with this simple, surfactant-free, system suggest that an additional attractive force, such as the long range hydrophobic interaction, might be required to explain oil droplet coalescence behaviour.     

Stability of Water/Crude Oil Systems Correlated to the Physicochemical Properties of the Oil Phase

A characterization of 30 crude oils has been performed to determine the relative level of influence that individual parameters have over the overall stability of w/o emulsions. The crude oils have been analyzed with respect to bulk and interfacial properties and the characteristics of their w/o emulsions. The parameters include compositional properties, acidity, spectroscopic signatures in the infrared and near‐infrared region, density, viscosity, molecular weight, interfacial tension, dilational relaxation, droplet size distribution, and stability to gravitationally and electrically induced separation. As expected, a strong covariance between several physicochemical properties was found. Near‐infrared spectroscopy proved to be an effective tool for crude oil analysis. In particular, we have showed the importance of the hydrodynamic resistance to electrically‐induced separation (static) in heavy crude oil‐water emulsions. A rough estimate of the drag forces and dielectrophoretic forces seemed to capture the difference between the 30 crude oils. Given enough time, water‐in‐heavy oil emulsions could be destabilized even at very low electric field magnitude (d.c.). When droplets approach each other in an inhomogeneous electric field, strong dielectrophoretic forces disintegrate the films and result in coalescence. The relative contribution from film stability to the overall emulsion stability may therefore be very different in a gravitational field compared to that in an electrical field.     

Particle self-assembly in oil-in-ionic liquid Pickering emulsions

We have studied polydimethylsiloxane (PDMS)-in-1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF(6)]) Pickering emulsions stabilized by polystyrene microparticles with different surface chemistry. Surprisingly, in contrast to the consensus originating from oil/water Pickering emulsions in which the solid particles equilibrate at the oil-water droplet interfaces and provide effective stabilization, here the polystyrene microparticles treated with sulfate, aldehyde sulfate, or carboxylate dissociable groups mostly formed monolayer bridges among the oil droplets rather than residing at the oil-ionic liquid interfaces. The bridge formation inhibited individual droplet-droplet coalescence; however, due to low density and large volume (thus the buoyant effect), the aggregated oil droplets actually promoted oil/ionic liquid phase separation and distressed emulsion stability. Systems with binary heterogeneous polystyrene microparticles exhibited similar, even enhanced (in terms of surface chemistry dependence), bridging phenomenon in the PDMS-in-[BMIM][PF(6)] Pickering emulsions.     

Nonwettable thin films from hybrid polymer brushes can be hydrophilic

Hybrid brushes composed of two liquid polymers, poly(dimethylsiloxane) (PDMS) and a highly branched ethoxylated polyethylenimine (EPEI), were synthesized on Si wafers by the "grafting to" method and by applying a combinatorial approach (fabrication of gradient brushes). The combinatorial approach revealed a strong effect of "layer assisted tethering", which allowed us to synthesize hybrid brushes twice as thick as the reference homopolymer brushes. The hybrid brushes are stable thin films that can rapidly and reversibly switch between hydrophilic and hydrophobic states in water and air, respectively. The switching in water affects a rapid release of amino functional groups which can be used to regulate adhesion and reactivity of the material. The switching in air rapidly returns the brush to a hydrophobic state. The hybrid brush is hydrophilic because of two mechanisms: (1) exposure of EPEI chains to the brush-water interface under water, and (2) retention of some fraction of water via swollen EPEI chains (the EPEI chains swell by 2-3 times), which are conserved by a PDMS cap in air. The hybrid brush is wettable under water, and at the same time, the brush is nonwettable in air because water droplets are trapped in a metastable state when the water contact angle is above 90 degrees .     

Pickering emulsions co-stabilised by cellulose nanofibres and nicotinamide mononucleotide

Cellulose - Emulsified solid particles adsorbed at the oil–water interface can stabilise Pickering emulsions by acting as a physical barrier to the coalescence of oil droplets. Cellulose...     

Flocculation and Coalescence of Oil-in-Water Poly(dimethylsiloxane) Emulsions

The stability of poly(dimethylsiloxane) (PDMS) oil-in-water emulsions has been investigated in the presence of added NaCl as well as in the presence of added surfactant. The emulsions were prepared using a combination of nonionic (C(x)E(y), x and y represent the number of methylene (C) and ethylene oxide (E) groups, respectively) and cationic (quarternary alkylammonium) surfactants. The droplets were observed to exhibit weak flocculation in the presence of high NaCl concentration (1 M). Phase separation and optical microscopic observations revealed that the principal mechanism for emulsion destabilization at high salt concentration was coalescence, which was accelerated at elevated temperature (50 degrees C). The effective coalescence rate for diluted emulsions was investigated using photon correlation spectroscopy. The small effective Hamaker constant for PDMS is the primary reason for the slow rate of coalescence observed for the emulsions at neutral pH in the presence of NaCl. The stability of PDMS emulsions to flocculation is qualitatively similar to that reported for low Hamaker constant dispersions (e.g., microgel particles). Addition of cationic surfactants (cetyltrimethylammonium chloride and dodecyl dimethylbenzylammonium chloride) to the negatively charged droplets after preparation was shown to decrease the emulsion stability once the surfactant concentration exceeded the CMC. Electrophoretic mobility measurements showed that added cationic surfactant changed the sign of the droplet charge from negative to positive at concentrations well below the CMC. Charged micelles of the same sign as the droplets are electrostatically excluded from close approach to the droplet surface within a distance (varepsilon) which results in depletion flocculation. Copyright 2000 Academic Press.     

Interfacial Behavior of Mixed Systems of Glycerylether-Modified Silicone and Polyoxyethylene-Modified Silicone

Undecylglycerylether-modified silicone (GES; the glycerylether-type surfactant with a silicone segment and alkyl chains (carbon number, 11) as the hydrophobic portion) forms a molecular aggregate (M.A.) with a small amount of water. This M.A. is similar to the reversed hexagonal liquid crystal formed by alpha-mono long-chain alkylglycerylether (3-isooctadecyloxy-1,2-propanediol; GE). From the investigation of the phase behavior in the water/GES/polydimethylsiloxane (PDMS) ternary system, a wide three-phase region of water (W)+M.A.+oil (O) was observed. As this M.A. is insoluble in PDMS and easily orients in the interface between water and PDMS, the high water content silicone W/O emulsion using GES as a surfactant is well stabilized. However, as the PDMS content increased this W/O emulsion became less stable. In order to improve this stability, mixtures of GES and polyoxyethylene-modified silicone (PS) were applied to the silicone emulsion as co surfactant. By application of a PS with a methyl group at the end cap of the polyoxyethylene chain (PSM), the emulsion became most stable at a GES/PSM ratio of 1 : 2, and at the same time, the interfacial tension between the oil phase and the water phase became minimal. The reason for this was studied by the measurement of spin-lattice relaxation times (T(1)) of the alkyl chains of GES in the GES/PS/water system by (13)C NMR. We assumed that the W/O silicone emulsions were stabilized by the efficient orientation of the aggregates in the interface between the silicone phase and the water phase by using PSM as a cosurfactant. Copyright 2001 Academic Press.