Comparison of the effects of different antiviral treatments on the antioxidant systems of stroma-free hemoglobin

The effect of virus inactivation by 1,9-dimethylmethylene blue (DMMB) phototreatment, methylene blue (MB) phototreatment or heat on the activities of antioxidant systems of stroma-free hemoglobin (SFH) was studied. DMMB photoinactivated human immunodeficiency virus by > 3.69 log10 under conditions that inactivated 3.33 log10 of vesicular stomatitis virus (VSV). Under conditions which inactivated VSV by 6.10 log10 (1.37 J/cm2 irradiation and 2 microM DMMB), there was little change in the methemoglobin (Met-Hb) formation, concentration of reduced glutathione (GSH), or superoxide dismutase (SOD), catalase (CAT) or glutathione peroxidase (GPX) activities. However, the activity of glutathione reductase (GR) was decreased by 77%. Under conditions that inactivated VSV by 5.69 log10 (1.37 J/cm2 irradiation and 24 microM MB) there was little effect of MB phototreatment on SOD, CAT, GPX and GSH activities. However, GR activity was decreased by 74% and Met-Hb content reached 3.98%. Under conditions that inactivated VSV by more than 6.20 log10 (60 degrees C for 2 min), virucidal heat treatment resulted in 27% Met-Hb formation and decreased GPX activity by 43%. No significant decline in SOD, CAT or GR activities or GSH concentration was observed. These results suggest that, compared with heat treatment and MB phototreatment, virucidal DMMB treatment preserves not only the oxidative state of hemoglobin but also the antioxidant systems against superoxide and hydrogen peroxide, although the reduced GR activity may limit the quenching capacity of antioxidants in DMMB-treated SFH.     

ANALYSIS OF VIRAL DNA, PROTEIN AND ENVELOPE DAMAGE AFTER METHYLENE BLUE, PHTHALOCYANINE DERIVATIVE OR MEROCYANINE 540 PHOTOSENSITIZATION

Abstract— Although numerous photosensitizers have been used experimentally to decontaminate viruses in cellular blood components, little is known about their mechanisms of photoinactivation. Using M13 bacteriophage and vesicular stomatitis virus (VSV) as model viruses, we have investigated alteration of the viral genome, protein and envelope after phototreatment. Methylene blue (MB) and aluminum phthalocyanine tetrasulfonate (AlPcS₄) phototreatment inactivated bacteriophage M13 and decreased the fraction of single-stranded circular genomic DNA (sc-DNA) by converting it to linear form. This conversion was enhanced by treating the extracted DNA with piperidine at 55°C. Piperidine-labile breaks were well correlated to phage survival (5.1% sc-DNA at 1.7% phage survival for MB) under conditions where only minor differences were seen in the relative abundance of M13 coat protein on sodium dodecyl sulfate—polyacrylamide gel electrophoresis (SDS-PAGE). Neither aluminum phthalocyanine (AlPc) nor merocyanine 540 (MC540) inactivated M13 nor were there significant changes observed in DNA and coat protein. Methylene blue, AlPcS₄ and AlPc inactivated VSV and inhibited fusion of the virus envelope to Vero cells at pH 5.7 (i.e. with plasma membrane). However, the degree of this inhibition was small compared to the extent of virus inactivation (43% inhibition vs 4.7 log10 or 99.998% inactivation, for MB). In contrast, an antibody to VSV G-spike protein inhibited fusion at pH 5.7 by 52% with a concomitant decline in VSV infectivity of 0.15 log₁₀ (30%). Few changes were observed in the relative abundance of G protein for MB and AlPcS₄ phototreated samples and no additional protein bands were observed on SDS-PAGE. Phototreatment did not appreciably change the relative fusion ability at pH 7.2 (via the endocytotic pathway). These results collectively suggest that nucleic acid may be an important target for photoinactivation of these model viruses by MB and AlPcS₄.     

Factors Affecting M13 Bacteriophage Inactivation by Methylene Blue Photosensitization

Abstract— We have investigated the factors that affect the virucidal activity of methylene blue (MB) photosensitization. The M13 bacteriophage was more rapidly inactivated at higher temperatures (6°C < 24°C < 38°C). Rate constants for inactivation were 0.072, 0.139 and 0.260 (log. inactiva-tion)/(J/cm²) at 6°C., 24°C and 38°C., respectively. On the other hand, dye penetration into virus particles, which was monitored by the fluorescence of YOYO-1, was unchanged with incubation temperature. These data suggest that temperature dependency of M13 inactivation was due to factors other than dye permeability. The pH of the virus suspension also affected the rate of M13 inactivation by MB. The M13 bacteriophage was inactivated faster in basic suspensions and slower in acidic suspensions compared with neutral buffers. These results suggest that temperature and pH are factors that influence the extent of MB photosensitization, and hence, the control of these factors will be necessary for MB phototreatment of plasma products in transfusion medicine.     

Nonlinear dynamics of intracellular methylene blue during light activation of cell cultures

Methylene blue (MB+) is a well-known dye in medicine and has been discussed as an easily applicable drug for topical treatment in photodynamic therapy (PDT). Methylene blue can potentially be used as a redox indicator to detect the important redox reactions that are induced during PDT. The kinetics of this process was analyzed on a subcellular level with confocal laser scanning microscopy. BKEz-7 endothelial cells were incubated 4 h with 1 microM MB+. The fluorescence dynamics of MB+ during irradiation with 633 nm light was observed with subcellular resolution. Images were acquired at 0.5 s intervals (frame rate 1 image/0.5 s). Fluorescence was observed in the red channel of the laser scanning microscope. Synchronously, the phase-contrast image was visualized with the green channel. Morphological changes could therefore be correlated with the dynamics of MB+. In addition, the light-dose-dependent phototoxicity at 633 nm irradiation was determined by viable cell counting. After an induction period (phase I), fast fluorescent spikes could be observed in the whole cytoplasm, which decayed with a time constant of about 20 s (phase II), followed by a period of nearly constant fluorescence intensity (phase III) and exponential photobleaching (phase IV). Phase II exhibits highly nonlinear kinetics, which is hypothesized to correlate probably with a nonlinear quantal production of reactive oxygen species (ROS). Morphological cell changes were not observed during phase II. During phase III, a pycnotic cell nucleus developed. From the determination of viable cells we can conclude that a light dose applied within phase II was only sublethal in correlation with morphological observations. Overproduction of ROS leading finally to cell killing during phases III and IV is discussed.     

Nucleation and Growth Mechanism of Electropolymerization of Methylene Blue: The Effect of Preparation Potential on Poly(methylene blue) Structure

Nucleation and growth mechanism of electropolymerization of methylene blue (MB) in a basic medium and the effect of preparation potential on poly(MB) film structure were investigated by using cyclic voltammetry, potentiostatic current‐time transient, scanning tunneling microscopy (STM), atomic force microscopy (AFM), and UV‐vis. absorption spectroscopy techniques. Electropolymerization of MB has been achieved by potentiodynamic (cyclic voltammetry) and potentiostatic (constant potential) techniques. The potentiostatic current‐time transients fitted with a theoretical model and morphological studies indicate that nucleation and growth mechanism of poly(MB) starts with a progressive layer‐by‐layer nucleation and growth besides random adsorption. Nucleation and growth of poly(MB) follows a process between progressive layer‐by‐layer and 3‐D instantaneous mechanism resulting in highly‐oriented poly(MB) nanofibers with increasing poly(MB) film thickness. Cyclic voltammetry and morphological studies exhibit that poly(MB) film structure changes depending on the preparation potential. Poly(MB) films prepared at the potential values of 900 and 950 mV show a well‐ordered, smooth surface but at the potential values higher than 1000 mV, rough polymer surface arises as overoxidation takes place. UV‐vis. absorption spectra of poly(MB) film and MB monomer show three peaks. The peak at 410 nm for poly(MB) shows 100 nm blue shift when compared to the MB monomer and is attributed to poly(MB) formation on the electrode.     

亚甲蓝在分子有序组合体中的聚集行为

研究了生物染色剂亚甲蓝(MB)在分子有序组合体(胶束、O/W微乳液和层状液晶)介质中的聚集行为。根据MB特征峰处的吸收光谱值,计算了MB的二聚平衡常数和相应单体、二聚体的摩尔消光系数。并用稳态荧光法和无外加探针的循环伏安法进一步论证了计算结果。研究发现,当MB总浓度一定时,在胶束体系中MB单体量较少,在层状液晶体系中单体量较多,在O/W微乳液体系中则介于胶束和层状液晶之间。表明层状液晶体系是获取更多MB单体的理想介质。     

Pulse radiolysis of methylene blue and toluidine blue in PVA

Pulse radiolysis experiments were carried out with aqueous solutions of thionine dye methylene blue (MB) and toluidine blue in the presence of polyvinyl alcohol. The transient spectra obtained show maxima at 400 and 880 nm and are assigned to the respective semiquinone radical anions. The semiquinone radical decayed by a second order process. Furthermore, MB in PVA films were bleached by γ-radiolysis and the change in absorption was found to be linear with the dose.     

Sensitive measurement of methylene blue active substances by attenuated total reflection spectrometry with a trimethylsilane-modified glass slab optical waveguide

Attenuated total reflection spectrometry with a slab optical waveguide (SOWG) was explored for the simple, rapid and sensitive measurement of total anionic surfactants by the methylene blue active substance (MBAS) method. A fused-silica sheet used as a guiding layer was modified with trimethylsilane (TMS) to extract and concentrate the MBASs on the SOWG surface. Based on preliminary studies of the adsorption behavior and visible ATR spectrum of MB on the modified silica surface, a detection wavelength of 600 nm was chosen for the sensitive measurement of anionic surfactants. When the concentration of MB was set at 10 microM in the final measurement solution, the calibration curve for a typical anionic surfactant (sodium dodecylbenzenesulfonate) was linear up to 0.6 microM and the detection limit was 0.07 microM. The proposed method was applied to the determination of total anionic surfactants in river water.     

Synthesis and DNA interactions of a bis-phenothiazinium photosensitizer

We report the synthesis and characterization of N,N-bis[(7-dimethylamino)phenothiazin-5-ium-3-yl]-4,4-ethylenedipiperidine diiodide (3), consisting of two photosensitizing phenothiazinium rings attached to a central ethylenedipiperidine linker. At all time points (10, 30, 60 min) and all wavelengths (676, 700, 710 nm) tested, photocleavage of pUC19 plasmid DNA (22 degrees C and pH 7.0) was markedly enhanced by 1 microM of 3 in comparison to 1 microM of the parent phenothiazine methylene blue (MB). At concentrations of phenothiazine ranging from 5 to 0.5 microM, the photocleavage levels produced by compound 3 were consistently higher than the cleavage produced using approximately twice the amount of MB (e.g., 710 nm irradiation of 5 microM of 3 and 10 microM of MB cleaved the plasmid DNA in 93% and 71% yields, respectively). Scavenger assays provided evidence for the involvement of singlet oxygen and, to a lesser extent, hydroxyl radicals in DNA damage. Analysis of photocleavage products at nucleotide resolution revealed that direct strand breaks and alkaline-labile lesions occurred predominantly at guanine bases. While compound 3 and MB were both shown to stabilize duplex DNA, the DeltaTm values of calf thymus (CT) and C. perfringens DNAs were approximately three fold higher in the presence of compound 3. Finally, viscometric data indicated that CT DNA interacts with compound 3 and MB by a combination of groove binding and monofunctional intercalation, and with compound 3 by a third, bisintercalative binding mode.     

MULTIPLE CHROMOPHORE SPECIES IN PHYTOCHROME*,†,‡

Abstract— Buffered aqueous solutions of pure phytochrome, when irradiated at 730 nm, had a main absorption band at about 660 nm and a shoulder or secondary band at 580–600 nm. When irradiated at 660 nm, these absorption bands bleached and a pair of bands at 670 and 725–730 nm appeared. When 660 nm irradiated samples were placed in the dark the 730 nm absorption slowly bleached and the 670 nm absorption band shifted to 660 nm. The kinetics of the bleaching indicated that two populations of P_FR existed initially. These two populations decayed by first order kinetics with k's of 4.8 × 10^-4 sec^-1 and 3.1 × 10^--⁵ sec^-1at 25°. While the bleaching of P_FR was occumng, the appearance of the 660 nm and 580–600 nm absorption bands characteristic of P_R took place. The kinetics of the increase in the 580 and 660 nm absorption bands indicated that it was arising from two populations of reactants by two first order reactions with k's of 6.4 × 10^-4 sec^-1 and 3.1 × 10^-5sec^-1 at 25°. When the sodium chloride concentration of the solvent was changed the proportions of the kinetically different populations were altered. In some conditions, especially in the presence of air. reversible but non-reciprocal changes in the four absorption bands were observed. These effects were evident after the lapse of many hours in the dark. When native phytochrome was treated with sodium dodecyl sulfate all absorption bands but the 580–600 nm absorption band were bleached and photoreversibility was lost. When native phytochrome was treated with glutaraldehyde, the 730 nm absorption band was bleached but photoreversibility was retained. It was concluded that at least four species of chromophore exist in phytochrome with absorption maxima at 580, 660 , 670 and 730 nm. Each chromophore is capable of being bleached by appropriate irradiation or in the dark by chemical reactions rather than photochemical reactions. The reactions are probably coupled redox reactions between the 580–660 nm pair and the 670–730 pair of chromophores. Discrepancies observed in the reciprocity of the absorption changes in these paired bands are probably due to various degrees of uncoupling and secondarily to the redox potential of the solvent when such uncoupling occurs.     

Methylene blue mediated photodynamic therapy in experimental colorectal tumors in mice

Methylene blue (MB+) is a well-known dye in medicine and has been discussed as an easily applicable drug for the topical treatment during photodynamic therapy (PDT). The therapeutic response of MB+ was investigated in vivo by local injection of MB+ in a xenotransplanted subcutanous tumor (adeno-carcinoma, G-3) in female nude mice. MB+ in a concentration of 1% was applied both undiluted and diluted to 0.1 and 0.01% with isotonic sodium chloride. Treatment with 1% MB+ and subsequent irradiation at 662 nm with 100 J/cm2 led to complete tumor destruction in 79% of the treated animals. A decrease of the fluence rate from 100 to 50 mW/cm2 increased the phototoxic response as well as fractionated light application. Small sensitizer concentrations reduced the PDT effect significantly. It seems that the light induced reaction of MB+ could be correlated with the rapid production of reactive oxygen species. Below a threshold dose of MB+ oxidative damage of the tissue is prevented. However, above this dose, as a point of no return, MB+ acts as an extremely potent oxidant.     

Synthesis and characterization of novel poly(1-naphthylamine)/zinc oxide nanocomposites: Application in catalytic degradation of methylene blue dye

The organic–inorganic poly(1-naphthylamine)/ZnO (PNA/ZnO) nanocomposites were synthesized by in situ chemical oxidative polymerization of 1-naphthylamine monomer and ZnO nanomaterials for the photocatalytic degradation of methylene blue (MB) dye under visible light. The surface properties of PNA molecules were altered by adding the ZnO nanomaterials. The crystalline and the optical properties of PNA/ZnO nanocomposites were improved with the increased contents of ZnO nanomaterials in PNA molecules due to the effective interaction of PNA to the surface of ZnO nanomaterials. The prepared PNA/ZnO nanocomposites presented moderate photocatalytic MB dye degradation of ~22% under visible light. The occurrence of dye degradation under visible light might attribute to high-charge separation of ē-h⁺ pairs at the interfaces of PNA and ZnO nanomaterials in its excited state under light irradiation.     

Light-driven horseradish peroxidase cycle by using photo-activated methylene blue as the reducing agent

In this work, the regeneration of native horseradish peroxidase (HRP), following the consecutive reduction of oxo-ferryl pi-cation (compound I) and oxo-ferryl (compound II) forms, was observed by UV-visible spectrometry and electron paramagnetic resonance (EPR) in the presence of methylene (MB+), in the dark and under irradiation. In the dark, MB+ did not affect the rate of HRP compound I and II reduction, compatible with hydrogen peroxide as the solely reducing species. Under irradiation, the dye promoted a significant increase in the native HRP regeneration rate in a pH-dependent manner. Flash photolysis measurements revealed significant redshift of the MB+ triplet absorbance spectrum in the presence of native HRP. This result is compatible with the dye binding on the enzyme structure leading to the increase in the photogenerated MB* yield. In the presence of HRP compound II, the lifetime of the dye at 520 nm decreased approximately 75% relative to the presence of native HRP that suggests MB* as the heme iron photochemical reducing agent. In argon and in air-saturated media, photoactivated MB+ led to native HRP regeneration in a time- and concentration-dependent manner. The apparent rate constant for photoactivated MB+-promoted native HRP regeneration, in argon and in air-saturated medium and measured as a function of MB+ concentration, exhibited saturation that is suggestive of dye binding on the HRP structure. The dissociation constant (KMB) observed for the binding of dye to HRP was 5.4+/-0.6 microM and 0.57+/-0.05 microM in argon and air-saturated media, respectively. In argon-saturated medium, the rate of the conversion of HRP compound II to native HRP was significantly higher, k2argon=(2.1+/-0.1)x10(-2) s(-1), than that obtained in air-equilibrated medium, k2air=(0.73+/-0.02)x10(-2) s(-1). Under these conditions the efficiency of photoactivated MB(+)-promoted native HRP regeneration was determined in argon and air-equilibrated media as being, respectively: k2/KMB=3.9x10(3) and 12.8x10(3) M(-1) s(-1).     

The laser-induced blue state of bacteriorhodopsin: mechanistic and color regulatory roles of protein-protein interactions, protein-lipid interactions, and metal ions

In this paper we characterize the mechanistic roles of the crystalline purple membrane (PM) lattice, the earliest bacteriorhodopsin (BR) photocycle intermediates, and divalent cations in the conversion of PM to laser-induced blue membrane (LIBM; lambda(max)= 605 nm) upon irradiation with intense 532 nm pulses by contrasting the photoconversion of PM with that of monomeric BR solubilized in reduced Triton X-100 detergent. Monomeric BR forms a previously unreported colorless monomer photoproduct which lacks a chromophore band in the visible region but manifests a new band centered near 360 nm similar to the 360 nm band in LIBM. The 360 nm band in both LIBM and colorless monomer originates from a Schiff base-reduced retinyl chromophore which remains covalently linked to bacterioopsin. Both the PM-->LIBM and monomer-->colorless monomer photoconversions are mediated by similar biphotonic mechanisms, indicating that the photochemistry is localized within single BR monomers and is not influenced by BR-BR interactions. The excessively large two-photon absorptivities (> or =10(6) cm(4) s molecule(-1) photon(-1)) of these photoconversions, the temporal and spectral characteristics of pulses which generate LIBM in high yield, and an action spectrum for the PM-->LIBM photoconversion all indicate that the PM-->LIBM and Mon-->CMon photoconversions are both mediated by a sequential biphotonic mechanism in which is the intermediate which absorbs the second photon. The purple-->blue color change results from subsequent conformational perturbations of the PM lattice which induce the removal of Ca(2+) and Mg(2+) ions from the PM surface.     

Photodynamic inactivation of methylene blue and tungsten-halogen lamp light against food pathogen Listeria monocytogenes

The aim of this study was to verify the bactericidal effect and the damage of photodynamic inactivation (PDI) using methylene blue (MB) and tungsten-halogen lamp over Listeria monocytogenes via atomic force microscopy, absorption spectrophotometry, agarose gel electrophoresis, real-time PCR and SDS-PAGE. The obtained data indicated that the viability of L. monocytogenes was ca 7-log reduced by illumination with 10 min tungsten-halogen lamp light under the presence of 0.5 μg mL(-1) MB, and this bactericidal activity against L. monocytogenes of PDI increased proportionally to the concentration of MB and the duration of irradiation. Moreover, after irradiation with MB and visible light, the leakage of intracellular contents was estimated by spectrophotometer at OD(260) and OD(280), which correlated with morphological alterations. Furthermore, genomic DNA cleavage and protein degradation were also detected after PDI treatment. Consequently, breakage of the membrane, damage of the genomic DNA and degradation of bacterial proteins may play an important role in the mechanisms involved in PDI-MB bactericidal activity on L. monocytogenes.     

Simultaneous determination of methylene blue and new methylene blue by slab optical waveguide spectroscopy and artificial neural networks

A slab optical waveguide (SOWG) has been used for study of adsorption of both methylene blue (MB) and new methylene blue (NMB) in liquid-solid interface. Adsorption characteristics of MB and NMB on both bare SOWG and silanized SOWG by octadecyltrichlorosilane (ODS) were compared. The simultaneous determinations of both MB and NMB were explored by flow injection SOWG spectrophotometric analysis and artificial neural networks (ANNs) for the first time. Concentrations of MB and NMB were estimated simultaneously with the ANNs. Results obtained with SOWG were compared with those got by conventional UV-visible spectrophotometry.     

Methylene blue and neutral red electropolymerisation on AuQCM and on modified AuQCM electrodes: an electrochemical and gravimetric study

The phenazine monomers neutral red (NR) and methylene blue (MB) have been electropolymerised on different quartz crystal microbalance (QCM) substrates: MB at AuQCM and nanostructured ultrathin sputtered carbon AuQCM (AuQCM/C), and NR on AuQCM and on layer-by-layer films of hyaluronic acid with myoglobin deposited on AuQCM (AuQCM-{HA/Mb}(6)). The surface of the electrode substrates was characterised by atomic force microscopy (AFM), and the frequency changes during potential cycling electropolymerisation of the monomer were monitored by the QCM. The study investigates how the monomer chemical structure together with the electrode morphology and surface structure can influence the electropolymerisation process and the electrochemical properties of the phenazine-modified electrodes. Differences between MB and NR polymerisation, as well as between the different substrates were found. The electrochemical properties of the PNR-modified electrodes were analysed by cyclic voltammetry and electrochemical impedance spectroscopy and compared with the unmodified AuQCM. The results are valuable for future applications of modified AuQCM as substrates for electroactive polymer film deposition and applications in redox-mediated electrochemical sensors and biosensors.     

Simultaneous photoconjugation of methylene blue and cis-Rh(phen)2Cl2+ to DNA via a synergistic effect

Irradiation of the red-light absorbing dye, methylene blue (MB), in the presence of the metal complex, cis-Rh(phen)2Cl2+ (BISPHEN), leads to irreversible photobinding of both reagents to DNA. Evidence from absorption and emission spectroscopy indicates that the dye is strongly complexed to the DNA at the concentrations used in the experiments and that this complex is unaffected by the presence of BISPHEN. The level of covalent binding is proportional to the absorbed light dose, with the quantum efficiency for covalent binding of BISPHEN to the DNA with 633 nm light equal to 3.5 x 10(-4). Electrospray ionization mass spectrum of a mixture of DNA fragments created by enzymatic degradation of DNA isolated following irradiation indicates that purine adducts are formed with both BISPHEN and the dye. In addition, UV-Vis and high-performance liquid chromatography analyses of the irradiated MB/BISPHEN/DNA mixture and isolated adducts show extensive conversion of the dye and metal complex to the corresponding N-demethylated and aquated derivatives, respectively. Triplet quenchers for MB, for example oxygen and benzoquinone, inhibit both the photoconjugation and the photochemistry of BISPHEN. A mechanism for the synergistic interaction is proposed that involves photoconjugation of both partners to the DNA following oxidation and reduction via electron transfer between 1MB*/DNA and 3MB*/BISPHEN.     

FLUORESCENCE OF HOUSEFLY VISUAL PIGMENT

Abstract —The fluorescence of housefly photoreceptors was studied in vivo by using the deep pseudopupil technique. Whereas the rhodopsin R490 of the peripheral retinular cells fluoresces negligibly the metarhodopsin M580 fluoresces distinctly in the red. The newly discovered metarhodopsin M'is produced by intense blue light and can be reconverted into rhodopsin by intense long wavelength light. M'also fluoresces in the red; its excitation spectrum and emission spectrum peak at _max= 570 and 660 nm respectively.
Intense ultraviolet light irreversibly reduces the visual pigment fluorescence as well as the broad band autofluorescence (kmnx 470 nm) originating from non-visual pigments in the fly's eye.     

Cobaltic accelerator for the methylene blue photoinitiation system in aqueous acrylate solution

A helium‐neon laser was used as a light source to induce the photopolymerization of ethoxylated trimethylolpropane triacrylate in aqueous solution. A near‐infrared spectrometer was used to follow the polymerization. Methylene blue (MB) and triethanolamine were used as the basic photoinitiation system, and novel accelerators to the two‐component initiation system were investigated. The three‐component photoinitiation systems containing cobaltic complexes as accelerators were found to be very efficient in initiating the polymerization of the aforementioned water‐soluble monomer, and the efficiency was higher than that initiated by MB/triethanolamine/diphenyl iodonium chloride, which has been reported previously. Twin redox cycles between MB and cobaltic complexes was proposed to explain the acceleration effect of the cobaltic complexes. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3836–3841, 2004