Iterative multifunctionalization of unactivated C-H bonds in piperidines by way of intramolecular Rh(II)-catalyzed aminations

Efficient stereocontrolled synthesis of di-, tri-, tetra-, and pentasubstituted piperidines from simple 2-sulfamoyloxymethyl piperidine derivatives has been performed by way of intramolecular Rh-catalyzed amination of saturated C-H bonds. In this process, the sulfamoyloxymethyl arm was directly or indirectly involved in the functionalization of every saturated methylene group of the piperidine ring at C-3, C-4, C-5, and C-6. Direct application to the total synthesis of iminosugars and related compounds demonstrated the synthetic potential of this strategy.     

Investigation on the regioselectivities of intramolecular oxidation of unactivated C-H bonds by dioxiranes generated in situ

We found that dioxiranes generated in situ from ketones 1-6 and Oxone underwent intramolecular oxidation of unactivated C-H bonds at delta sites of ketones to yield tetrahydropyrans. From the trans/cis ratio of oxidation products 1a and 2a as well as the retention of the configuration at the delta site of ketone 5, we proposed that the oxidation reaction proceeds through a concerted pathway under a spiro transition state. The intramolecular oxidation of ketone 6 showed the preference for a tertiary delta C-H bond over a secondary one. This intramolecular oxidation method can be extended to the oxidation of the tertiary gamma' C-H bond of ketones 9 and 10. For ketone 11 with two delta C-H bonds and one gamma' C-H bond linked respectively by a sp(3) hydrocarbon tether and a sp(2) ester tether, the oxidation took place exclusively at the delta C-H bonds. Finally, by introducing proper tethers, regioselective hydroxylation of steroid ketones 12-14 have been achieved at the C-17, C-16, C-3, and C-5 positions.     

Strain energy of small ring hydrocarbons. Influence of C-h bond dissociation energies

Ab initio calculations at the G2, G3, and CBS-Q levels of theory have been applied to the question of the origin of ring strain in a series of unsaturated hydrocarbons. In addition to the angular ring strain germane to all three-membered ring hydrocarbons, a general trend is in evidence that suggests that the increased ring strain (SE) of unsaturated small ring alkenes may be attributed in part to their relatively weak allylic C-H bonds. The high strain energy of cyclopropene (54.1 kcal/ mol) is attributed largely to angular strain. The anomalously low SE of cyclobutene relative to cyclobutane (DeltaSE = 4 kcal/mol) is a consequence of normal C-H bond dissociation energies for cyclobutane (100.6 kcal/mol) and very strong vinyl C-H bonds (111.9 kcal/mol) and a relatively strong pi-bond energy (63.5 kcal/mol) for cyclobutene. The greater SE of methylenecyclopropane (39.5 kcal/ mol), relative to methylcyclopropane (29.8 kcal/mol), can be attributed to the strong ring C-H bonds of methylcyclopropane (110.5 kcal/mol) and relatively weak allylic C-H bonds (99.3 kcal/mol) of methylenecyclopropane. The increased SE of 1-methylcyclopropene relative to isomeric methylenecyclopropane is ascribed to its weak ring C-H bonds and to angular strain. The relative thermodynamic stability of a series of small ring alkenes is determined by a measure of their hydrogenation enthalpies. Independent confirmation of the SEs of a series of substituted cyclopropenes is provided by their dimerization/combination with cyclopropane to form a six-membered ring reference compound.     

The molecular structure of toluene

Discrepancies between two recently reported electron diffraction studies of toluene have provided the incentive for an ab initio structural determination at the 4-21 level. The methyl C-H bonds are on the average 0.011 Å longer than the ring C-H bonds. While the average ring C-C and C-H distances are nearly identical with those of benzene, the ring exhibits marked asymmetry, including an unexpected coupling between the ring C-C distances and the angle of methyl rotation.     

Ruthenium-catalyzed C-H/CO/Olefin coupling reaction of N-arylpyrazoles. Extraordinary reactivity of N-arylpyrazoles toward carbonylation at C-H bonds

The reaction of 1-arylpyrazoles with CO and ethylene in the presence of Ru(3)(CO)(12) resulted in regioselective carbonylation at the ortho C-H bonds. While it is found that the pyrazole ring also functions as the directing group for C-H bond cleavage, the efficiency of the reaction depends on the position of the pyrazole ring.     

An efficient C-H oxidation protocol for alpha-hydroxylation of cyclic steroidal ethers

[reaction: see text] Various C-16 hydroxy steroids have been prepared with the aid of CrO(3)/Bu(4)NIO(4). Out of the two possible reaction courses, transition state B is favored because of less steric interference between substrate and CrO(4). Thus, C-H bonds at C-16 are oxidized selectively.     

Ruthenium- and rhodium-catalyzed direct carbonylation of the ortho C-H bond in the benzene ring of N-arylpyrazoles

The direct carbonylation of C-H bonds in the benzene ring of N-phenylpyrazoles via catalysis by ruthenium or rhodium complexes is described. The reaction of N-phenylpyrazoles with carbon monoxide and ethylene in the presence of Ru(3)(CO)(12) or Rh(4)(CO)(12) resulted in the site-selective carbonylation of the ortho C-H bonds in the benzene ring to give the corresponding ethyl ketones. A variety of functional groups on the benzene ring can be tolerated. N-Phenylpyrazoles have higher reactivities than would be expected, based on the pK(a) values of the conjugate acid of pyrazole. The choice of solvent for this reaction is significant, and N, N-dimethylacetamide (DMA) gives the best result.     

Oxidation of unsaturated steroid ketones with hydrogen peroxide catalyzed by Fe(bpmen)(OTf)2. New methodology to access biologically active steroids by chemo-, and stereoselective processes

In this paper we describe a new environmentally friendly method to promote the oxidation of steroids. The chemo- and stereoselective aspects of the oxidation of conjugated enones, dienones, further unsaturated enones, estrone, and cholestane acetates were under study.The great facial stereoselectivity of the method has been shown on substrates 12, 14, and 18 improving some of the updated reported procedures in the literature. Reaction with substrate 16 displays the competition between the C4-C5 and the C9-C11 double bonds. The steric hindrance around C ring activates the C-H hydroxylation at the allylic position on C-12 by formation of the allylic alcohol 17c.The C-H activation at C-5 was proven to succeed on the oxidation reaction of androstane 26 by formation of the tertiary alcohol 27.     

Syntheses and Structural Characterization of 1-（4-Phenyl-2-thiazolyl）-3-（4-methylphenyl）-5-（2-furyl）-4,5-dihydro-（1H）-pyrazole and 1-（4-（4-Fluoro）phenyl-2-thiazolyl）-3-（4-methyl-phenyl）-5-（2-furyl）-4,5-dihydro-（1H）-pyrazole

The title compounds were synthesized and characterized by IR,1H-NMR,Mass and elementary analysis and single-crystal X-ray diffraction.In 1a,intermolecular C-H…π interactions produce a three-dimensional network.In 1b,intermolecular C-H…O hydrogen bonds generate an R22(22) ring.The hydrogen bonding is supported by C-H…π interactions.     

Theoretical investigation of in-plane hydrogen-bonded complexes of ammonia with partially substituted fluorobenzenes

Systematic investigation of in-plane hydrogen-bonded complexes of ammonia with partially substituted fluorobenzenes has revealed that fluorobenzene, difluorobenzene, and trifluorobenzene favor formation of cyclic complexes with a C-H...N-H...F-C binding motif. On the other hand, tetrafluorobenzene and pentafluorobenzene favor formation of linear C-H...N hydrogen-bonded complexes. The complete absence of exclusively linear N-H...F hydrogen-bonded complexes for the entire series indicates that C-F bond in fluorobenzenes is a reluctant hydrogen-bond acceptor. However, fluorine does hydrogen bond when cooperatively stabilized with C-H...N hydrogen bonds for the lower fluoro analogues. The propensity of fluorobenzenes to adapt to the C-H...N-H...F-C binding motif decreases with the progressive fluorination of the benzene ring and disappears completely when benzene ring is substituted with five or more fluorine atoms.     

CH...O and CH...F links form the cage structure of dioxane-trifluoromethane

The molecular beam Fourier transform microwave spectrum of 1,4-dioxane-trifluoromethane has been assigned and measured. The two subunits form a cage stabilized by one C-H...O and two C-H...F weak hydrogen bonds. The C-H...O link involves the axial lone pair of one of the two equivalent ring oxygens, while the two C-H...F bridges connect trifluoromethane to the two axial hydrogens in positions 3 and 5. The dissociation energy has been estimated from the D(J) centrifugal distortion parameter to be approximately 6.8 kJ/mol.     

Mass spectrometry in structural and stereochemical problems—CCXLIV : The influence of substituents and stereochemistry on the mass spectral fragmentation of progesterone

The complete high resolution mass spectra of progesterone (Δ⁴-pregnene-3,20-dione) and twenty-nine stereoisomers and alkyl substituted analogs have been analyzed with the aid of the recently developed computer program INTSUM. Progesterone analogs with “normal” configuration at the six chiral skeletal carbon atoms give rise to abundant ions corresponding to cleavage of the 1–2 and 3–4 bonds (ketene elimination), to cleavage of the 6–7 and 9–10 bonds (ring B cleavage), and to cleavage of the 13–17 and 15–16 bonds (partial ring D cleavage); these reactions are frequently followed by elimination of alkyl radicals. Alkyl groups at C-6 and C-10 exert a pronounced influence on the formation and fragmentation of the [M-ketene] ions. Reversal of configuration at C-10 increases the importance of ring B cleavage, whereas reversal at C-17 favors the partial cleavage of ring D. The fragmentation of 17-alkylprogesterones differs significantly from the general pattern, with acetyl loss (cleavage of the 17–20 bond) and partial ring D cleavage as the predominating reactions. Loss of ring D by cleavage of the 13–17 and 14–15 bonds is not an important reaction of progesterones. Direct interaction of the two ketonic functions was not observed.     

Stereoelectronic interactions in cyclohexane, 1,3-dioxane, 1, 3-oxathiane, and 1,3-dithiane: W-effect, sigma(C)(-)(X) <--> sigma(C)(-)(H) interactions, anomeric effect-what is really important?

Stereoelectronic effects proposed for C-H bonds in cyclohexane, 1, 3-dioxane, 1,3-oxathiane, and 1,3-dithiane were studied computationally. The balance of three effects, namely, sigma(C)(-)(X) --> sigma(C)(-)(H)()eq, sigma(C)(-)(H)()eq --> sigma(C)(-)(X), and n(p)(X) --> sigma(C)(-)(H)()eq interactions, was necessary to explain the relative elongation of equatorial C(5)-H bonds. The role of homoanomeric n(p) --> sigma(C(5))(-)(H)()eq interaction is especially important in dioxane. In dithiane, distortion of the ring by long C-S bonds dramatically increases overlap of sigma(C(5))(-)(H)()eq and sigma(C)(-)(S) orbitals and energy of the corresponding hyperconjugative interaction. Anomeric n(p)(X) --> sigma(C)(-)(H)()ax interactions with participation of axial C-H bonds dominate at C(2), C(4), and C(6). The balance of hyperconjugative interactions involving C-H(ax) and C-H(eq) bonds agrees well with the relative bond lengths for all C-H(ax)/C-H(eq) pairs in all studied compounds. At the same time, the order of one-bond spin-spin coupling constants does not correlate with the balance of stereoelectronic effects in dithiane and oxathiane displaying genuine reverse Perlin effect.     

Investigations of coupling characters in ionic liquids formed between the 1-ethyl-3-methylimidazolium cation and the glycine anion

In this study, novel ionic liquids formed between the 1-ethyl-3-methylimidazolium cation [emim]+ and the glycine anion [Gly]- have been investigated theoretically. The relevant geometrical characteristics, energy properties, the characters of the intermolecular hydrogen bonds (H bonds), and the possibility of proton transfer as well as IR characteristics have been systematically discussed. The natural bond orbital (NBO) and atoms in molecule (AIM) analyses have also been applied to understand the nature of the interactions between ionic pairs in ionic liquids. The most stable geometries have been determined by analyzing the relative energies and interaction energies, where the C-H...O intermolecular H bonds involving the protons attached to the imidazolium ring have been found to possess partial covalent character in nature. Electron transfers from the lone pairs of the carbonyl O atom of [Gly]- to the C-H antibonding orbital of the [emim]+ can explain the elongation and red shift of the C-H stretching frequency. The interaction modes are more favorable when the carbonyl O atoms of [Gly]- interact with the C2-H of the imidazolium ring and the C-H of the methyl group through the formation of double H bonds. The origin of the high stability of the amino acid ionic liquids observed experimentally may be attributed to the nonexistence of the proton-transferred products (neutral pairs) together with the large energy needed for separation of the ionic pairs. Additionally, the characteristics of the IR spectra have been analyzed to demonstrate the variants of the molecular structure of the [emim]+[Gly]- ionic liquids.     

Vibrational overtone spectroscopy, energy levels, and intensities of (CH3)3C-C≡C-H

The vibrational overtone spectra of the acetylenic (Δυ = 4, 5) and methyl (Δυ = 5, 6) C-H stretch transitions of tert-butyl acetylene [(CH(3))(3)C-C≡C-H] were obtained using the phase shift cavity ring down (PS-CRD) technique at 295 K. The C-H stretch fundamental and overtone absorptions of the acetylenic (Δυ = 2 and 3) and methyl (Δυ = 2-4) C-H bonds have been obtained using a Fourier transform infrared and near-infrared spectrophotometer. Harmonic frequency ω(ν(1)) and anharmonicities x(ν(1)) and x(ν(1), ν(24)) are reported for the acetylenic C-H bond. Molecular orbital calculations of geometry and vibrational frequencies were performed. A harmonically coupled anharmonic oscillator (HCAO) model was used to determine the overtone energy levels and assign the absorption bands to vibrational transitions of methyl C-H bonds. Band strength values were obtained experimentally and compared with intensities calculated in terms of the HCAO model where only the C-H modes are considered. No adjustable parameters were used to get order of magnitude agreement with experimental intensities for all pure local mode C-H transitions.     

Microwave-assisted C-3 selective oxidative radical alkylation of flavones

Flavones were directly alkylated at the C-3 position in moderate yields using a xanthate-based oxidative radical addition procedure. This methodology is a suitable synthetic tool for the direct substitution of the vinylic and unactivated C-H bond of the C ring of the flavone by an alkyl functionality under neutral conditions.     

Bend ribbon-forming tetrahydrofuran amino acids

Short oligomeric chains of C-glycosyl beta-D-arabinofuranose configured tetrahydrofuran amino acids (where the C-2 and C-5 substituents of the tetrahydrofuran ring are cis to each other) exhibit a well-defined repeating turn secondary structure stabilised by (i, i - 2) inter-residue hydrogen bonds. This is in contrast to the epimeric alpha-D-arabinofuranose oligomer (where the C-2 and C-5 substituents of the tetrahydrofuran ring are trans to each other) in which there is no indication of any secondary structure in solution.     

"Union is strength": how weak hydrogen bonds become stronger

Recently reported rotational spectroscopic studies on small dimers and oligomers bound by weak hydrogen bonds show that the driving forces, the spatial arrangement and the dynamical features displayed are very different from those involved in stronger and conventional hydrogen bonds. The very small binding energies (similar to those of van der Waals interactions) imply that the stabilization of the dimer is often obtained by networks of weak hydrogen bonds. Even in the presence of multiple bonds the partner molecules show a high degree of internal freedom within the complex. This paper analyses several examples of molecular adducts bound by weak hydrogen bonds formed in free jet expansions and recently characterized by rotational spectroscopy. They include weakly bound complexes of weak donors with strong acceptors (C-H···O,N, S-H···O,N), strong donors (O-H, N-H) with weak acceptors such as the halogen atoms and π systems but also the elusive interactions between weak donors and weak acceptors (C-H···π and C-H···halogen). Examples are also given where rotational spectroscopy highlights that weak hydrogen bonds are extremely important in chiral recognition phenomena and as driving forces of the conformational landscape of important biomolecules.     

C-H Bond Functionalization via Hydride Transfer: Formation of α-Arylated Piperidines and 1,2,3,4-Tetrahydroisoquinolines via Stereoselective Intramolecular Amination of Benzylic C-H Bonds

We here report a study of the intramolecular amination of sp(3) C-H bonds via the hydride transfer cyclization of N-tosylimines (HT-amination). In this transformation, 5-aryl aldehydes are subjected to N-toluenesulfonamide in the presence of BF(3)·OEt(2) to effect imine formation and HT-cyclization, leading to 2-arylpiperidines and 3-aryl-1,2,3,4-tetrahydroisoquinolines in a one-pot procedure. We examined the reactivity of a range of aldehyde substrates as a function of their conformational flexibility. Substrates of higher conformational rigidity were more reactive, giving higher yields of the desired products. However, a single substituent on the alkyl chain linking the N-tosylimine and the benzylic sp(3) C-H bonds was sufficient for HT-cyclization to occur. In addition, an examination of various arenes revealed that the electronic character of the hydridic C-H bonds dramatically affects the efficiency of the reaction. We also found that this transformation is highly stereoselective; 2-substituted aldehydes yield cis-2,5-disubstituted piperidines, while 3-substituted aldehydes afford trans-2,4-disubstituted piperidines. The stereoselectivity is a consequence of thermodynamic control. The pseudoallylic strain between the arene and tosyl group on the piperidine ring is proposed to rationalize the greater stability of the isomer with the aryl ring in the axial position. This preferential placement of the arene is proposed to affect the observed stereoselectivity.     

Synthesis of polycyclic heterocycles via a one-pot ortho alkylation/direct heteroarylation sequence

[reaction: see text] Polycyclic thiophenes and furans were synthesized using a one-pot ortho alkylation/direct heteroarylation reaction sequence. Under the optimized reaction conditions, aryl iodides were coupled with 3-(bromoalkyl)thiophenes or -furans, affording six- and seven-membered annulated ring products via formation of two C-C bonds from two aryl C-H bonds.