What drives the precipitation of long-chain calcium carboxylates (soaps) in aqueous solution?

The interaction of sodium octanoate, decanoate or dodecanoate with calcium(ii) in aqueous solutions has been studied using turbidity, conductivity and potentiometric measurements. These show a marked alkyl chain length dependence on the behaviour. At the calcium concentration used (1.0 mM), there is little interaction with the octanoate, the decanoate shows initially formation of a 1:1 complex, followed by precipitation, while the dodecanoate precipitates at low surfactant concentrations. The solid calcium carboxylates were prepared, and show lamellar, bilayer structures with planes of calcium(II) ions coordinated to carboxylate groups through bidentate chelate linkages. Thermogravimetry and elemental analyses indicate the presence of coordinated water with the calcium decanoate but not with longer chain carboxylates. The results of both the solution and solid state studies suggest that precipitation of long-chain carboxylates depends on a balance between hydration effects and hydrophobic (largely van der Waals') interactions. Electrostatic effects make little energetic contribution but play the important structural role of ordering the carboxylate anions before precipitation. Differences are observed in the interactions between calcium(II) and long chain alkylcarboxylates and alkylsulfates, and are interpreted in terms of stronger binding to the metal of the carboxylate group. A general mechanism is proposed for calcium carboxylate precipitation from aqueous solution based on this and previous studies.     

INTERACTIONS BETWEEN CATIONIC STARCH AND ANIONIC SURFACTANTS III RHEOLOGY AND STRUCTURE OF THE COMPLEX PHASE

This paper reports on studies of the rheological properties of cationic starch (CS)/ surfactant systems. The degree of substitution of the CS was 0.1 - 0.8. Surfactants investigated were sodium dodecyl sulfate (SDS), potassium octanoate (KOct), sodium decanoate (NaDe)potassium dodecanoate (KDod), sodium oleate (NaOl) and sodium erucate (NaEr). Aggregation of surfactant micelles with the polymer produces a hydrophobic and pseudoplastic gel-like complex phase with low water content and high viscosity. The rheological behavior of the gels is described by the Herschel-Bulkley model. In dilute aqueous solution the CS/surfactant aggregate structure resembles a randomly coiled polymer network, in which polymer molecules are linked by micelles. The rheological data for the gel are compatible with the assumption that the surfactants form liquid crystalline structures with the polymer anchored to the surfactant aggregates, as recently suggested for analogous systems. However, this conjecture needs to be corroborated by more direct determinations of the structure.     

Structural analysis of the solid amorphous binuclear complexes of iron(III) and aluminum(III) with chromium(III)-DTPA chelator using energy dispersive X-ray diffraction

This paper is concerned with the structural data obtained for two amorphous binuclear complexes of iron(III) and aluminum(III) with chromium(III)-diethylentriaminepentaacetic acid (chromium(III)-DTPA, CrL(2)(-)) using the energy-dispersive X-ray diffraction technique. Fe(OH)CrL(H(2)O)(6) and Al(OH)CrL(H(2)O)(6) are binuclear complexes, the metals ions being bridged via oxygen atoms. The metal ions are all octahedrally coordinated.     

ICP-AES detection of ultratrace aluminum(III) and chromium(III) ions with a microcolumn preconcentration system using dynamically immobilized 8-hydroxyquinoline on TiO2 nanoparticles.

Titanium dioxide nanoparticle dynamically loaded with 8-hydroxyquinoline (nanometer TiO2-Oxine) was used as a solid-phase extractant for the preconcentration of trace amounts of aluminum(III) and chromium(III) prior to their determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). The optimal conditions for preparing nanometer TiO2-Oxine were obtained. Also, the separation/preconcentration conditions of analytes, including the effects of the pH, the sample flow rate and the volume, the elution solution and the interfering ions on the recovery of the analytes were investigated. At pH 6.0, the adsorption capacity of nanometer TiO2-Oxine was found to be 5.23 mg g(-1) and 9.58 mg g(-1) for Al(III) and Cr(III), respectively. An enrichment factor of 50 was achieved by this method, and the detection limits (3sigma) for Al(III) and Cr(III) were 1.96 and 0.32 microg L(-1) respectively. The proposed method was applied for the determination of trace Al(III) and Cr(III) in biological samples and lake water with satisfactory results.     

Electrode processes and their kinetic parameters in the reduction and oxidation of Cr(III) and Cr(II) in molten CsCl

The reduction of chromium ions in the CsCl-CrCl₃ melt in wide concentration and temperature ranges is reported. It is assumed that the melt contains polynuclear chromium complexes. The reduction of Cr(III) to Cr(II) is a reversible one-electron process. The electroreduction of divalent chromium to chromium metal is an irreversible process involving dinuclear and mononuclear chromium complex ions. The electron transfer rate constant has been calculated for various temperatures and chromium chloride concentrations in the salt melt. The activation energy of electron transfer and its dependence on the CrCl₃ concentration in the electrolyte have been determined for the Cr(III) ↔ Cr(II) process.     

STUDIES ON THE ISOMORPHOUS SUBSTITUTION OFFe(III) AND Cr(III) IN MCM-41 MOLECULAR SIEVES

IntroductionRecently.therehasbeengreatillterestinthediscoveryofthemesoporouscrystallinematerialMCM-4ill,2].MCM-41isthecollectivenameforafamilyofsolidswithporesizebetween16and100A,whichpossessesahexagonalarrayofuniformmesopores.Ithasbeenfoundthatmetalatoms…     

Binding of propylene oxide to porphyrin- and salen-M(III) cations, where M = Al, Ga, Cr, and Co

The binding of propylene oxide (PO) to a series of metal cations LM(III)(+), where for L = tetraphenylporphyrin (TPP) M = Al, Ga, Cr, and Co, and for L = (R,R)-N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexenediamine (salen) M = Al and Cr, was studied in the gas phase by electrospray tandem mass spectroscopy, and the relative stabilities of LM(PO)(2)(+) and LM(PO)(+) cations were determined. The chromium(III) and aluminum(III) cations most tenaciously bind PO, and for M = Al, coordination to the TPP ligated metal center was favored relative to salen. For (TPP)M(PO)(2)(+), the dissociation of PO followed the order M = Al > Cr, but for (TPP)M(PO)(+) the dissociation was M = Cr > Al. The single-crystal structural determinations on (R,R-salen)AlOCHMe(S)CH(2)Cl.0.5PO and (R,R-salen)AlO(2)CMe.1.5py grown in neat PO and pyridine, respectively, reveal five-coordinate aluminum(III) centers with the alkoxide/acetate ligands in the axial position of a square-based pyramid. These results are discussed in terms of the reactivity of these metal complexes in ring-opening polymerizations and copolymerizations with PO and CO(2), respectively.     

The effects of chromium(III) coordination on the dissociation of acidic peptides

The complexes formed between chromium(III) and synthetic acidic peptides were studied by sustained off-resonance irradiation collision-induced dissociation (SORI-CID) in a Fourier transform ion-cyclotron resonance (FT-ICR) mass spectrometer equipped with electrospray ionization (ESI). Neutral peptides and peptides containing one, two, and multiple acidic residues were studied. Formation of [M + Cr-2H]+ occurred for all peptides. Three noteworthy features were found in the CID spectra of [M + Cr-2H]+. The first is that fewer fragment ions were produced from [M + Cr-2H]+ than from [M + H]+. The reason may be that multiple coordination between chromium(III) and carboxylate or carbonyl groups hinders the production of fragment ions by continuing to bind pieces of the peptide to chromium(III) after cleavage of bonds within the peptide. The second feature is loss of CO from [M + Cr-2H]+ and [y(n) + Cr-H]+. A mechanism involving coordination of chromium(III) with carboxylate groups is proposed to rationalize elimination of CO. The third feature is that chromium(III) is retained in all fragment ions, indicating strong binding of the metal ion to the peptides. The complex [M + 2Cr-5H]+ is formed as the peptide chain length and number of acidic residues increases. Longer peptides have more sites to coordinate with chromium(III) and more conformational flexibility. In addition, formation of [M + Cr-2H]+ from AGGAAAA-OCH(3), which has no carboxylic acid groups, suggests that chromium(III) can coordinate with sites on the peptide backbone, albeit in low abundance. In the negative mode, [M + Cr-4H](-) was only found for peptides containing four or more carboxylic acid groups. This is consistent with deprotonated carboxylic acid groups being involved in chromium(III) coordination and with chromium existing in the 3 + state in the gas-phase ions.     

Studies on chromium(III) hydroxide, arsenate, antimonate, molybdate and tungstate

Five water-insoluble compounds of chromium(III) have been synthesized by mixing 0.10M solutions of chromic chloride and the appropriate sodium salts in the volume ratio of 1:2, at pH 6-7. Their ion-exchange characteristics have been compared. The tungstate has the highest chemical stability and the arsenate has the highest ion-exchange capacity. Chromium(III) molybdate columns have been used to separate Pb(2+) from numerous metal ions.     

Electrode processes occurring during the electrodeposition of chromium-carbon coatings from solutions of Cr(III) salts with carbamide and formic acid additions

The regularities and possible mechanisms of electrode processes occurring during the electrodeposition of the Cr-C alloy from an electrolyte based on Cr(III) sulfate with carbamide and formic acid as organic components were analyzed. The chromium electrodeposition was found to impose its kinetics on carbon inclusion in the alloy. The mechanism of carbon incorporation in the deposit was assumed to be the chemical interaction of the adsorbed organic particles with highly active chromium adatoms. During the stage discharge of Cr(III) ions to the metal, the rate of the limiting stage Cr(II) + 2e → Cr(0) increased when OH^? or F^? ions were included in the structure of the electrochemically active complex.     

Improvement on Simultaneous Determination of Cr(III) and Cr(VI) by Capillary Electrophoresis and Chemiluminescence Detection

Chromiumexistsindifferentoxidationstatesingroundwater,industrialwastewater,seawater,andsoilofourenvironment1,2.Chromium(III)isanessentialtraceelementforhumans,requiredforthemaintenanceofnormalglucose,cholesterol,andfattyacidmetabolism.Ontheotherhand,watersolublechromium(VI),intheformCr2O72-orCrO42-,ishighlyirritatingandtoxictohumansandanimals3.Itsacutetoxiceffectsincludeanimmediatecardiovascularshockandlatereffectsonkidney,liver,andblood-formingorgans.Therefore,itisnecessaryforriskassessme…     

Interactions of Aluminum(III) with Phosphates

In order to obtain information about aluminum(III)-phosphate interactions, potentiometric measurements were carried out to characterize the complex forming properties of Al(III) with organic phosphates, phosphonates, and nucleoside-5'-monophosphates. The aluminum(III)-orthophosphate system is difficult to study due to AlPO(4) precipitation. To overcome this problem, the stability constant logarithms of the 1:1 Al(III) complexes of ligands with the same donor groups (log K(1:1)) were plotted against the basicities of the ligands (log K(PO)3(H)). The resulting linear free energy relation (LFER) indicates that organic phosphates, phosphonates, and uridine-, thymidine-, and guanosine 5'-monophosphates similarly bind Al(III). Adenosine and cytidine 5'-monophosphate fall above the LFER owing to the presence of a second microform with the nucleic base protonated and a hydroxide bound to the Al(III). From the LFER the log stability constant for Al(III) binding to HPO(4)(2-) is estimated as 6.13 +/- 0.05. From the weakness of any soluble orthophosphate complexes of Al(III) we confirm the importance of citrate as the main small molecule Al(3+) binder in the blood serum. The study includes investigation of Al(III) binding to di- and triphosphates, which bind metal ion differently than monophosphates. Structures of the complexes were supported by (31)P NMR measurements.     

Speciation studies by capillary electrophoresis- Simultaneous determination of chromium(III) and chromium(VI)

A method for the simultaneous determination of chromium(III) and chromium(VI) by capillary electrophoresis (CE) has been developed. The chromium(III) has been chelated with 1,2-cyclohexanediaminetetraacetic acid (CDTA) in order to impart a negative charge and similar mobility to both the chromium(III) and the chromium(VI) species. The effects of the amount of the reagent, pH and heating time required to complete the complexation have been studied. Factors affecting the CE behaviour such as the polarity of electrodes and the pH of electrophoretic buffer have been investigated. The separated species have been monitored by direct UV measurements at 214 nm. The detection limits achieved are 10 microg/l for Cr(VI) and 5 microg/l for Cr(III) and linear detector response is observed up to 100 mg/l. The procedure has been applied to the determination of both chromium species in industrial electroplating samples and its accuracy was checked by comparing the results (as total chromium) with those of atomic absorption spectrometry. No interference occurred from transition metal impurities under optimized separation conditions. The method is also shown to be feasible for determining Cr(III) as well as other metal ions capable to form complexes with CDTA (like iron(III), copper(II), zinc(II) and manganese(II)) in pharmaceutical preparations of essential trace elements.     

Stability and distribution studies on Sn(IV) and Cr(III) arsenophosphates: Separations of metal ions

The stability of tin(IV) and chromium(III) arsenophosphates in mineral acids and sodium hydroxide has been investigated. Structures for the two compounds are proposed, based on the results of thermogravimetric analysis, K(d) values for metal ions on these two compounds have been determined and separations of UO(2+)(2)-Th(4+), UO(2+)(2)-Zr(4+) and Na(+)-K(+) achieved.     

Spectro-thermal characterization of chromium(III) and manganese(II) complexes with carboxyamide

Complexes of Cr(III) and Mn(II) with N′,N″-bis(3-carboxy-1-oxopropanyl) 2-amino-N-arylbenzamidine (H₂L¹) and N′,N″-bis(3-carboxy-1-oxophenelenyl) 2-amino-N-arylbenzamidine (H₂L²) have been synthesized and characterized by various physico-chemical techniques. The vibrational spectral data are in agreement with coordination of amide and carboxylate oxygen of the ligands with the metal ions. The electronic spectra indicate octahedral geometry around the metal ions, supported by magnetic susceptibility measurements. The thermal behavior of chromium(III) complexes shows that uncoordinated nitrate is removed in the first step, followed by two water molecules and then decomposition of the ligand; manganese(II) complexes show two waters removed in the first step, followed by removal of the ligand in subsequent steps. Kinetic and thermodynamic parameters were computed from the thermal data using Coats and Redfern method, which confirm first order kinetics. The thermal stability of metal complexes has been compared. X-ray powder diffraction determines the cell parameters of the complexes.     

Effect of hydrodynamic electrolysis conditions on the kinetics of cathodic processes in chromium(III) sulfate electrolytes

The effect of stirring on the kinetics of electrode processes in a chromium-plating electrolyte based on chromium(III) sulfate is studied. The electrolyte, in which thick (up to 120 μm) hard chromium coatings can be obtained, is stirred with a magnetic stirrer. Hydrodynamic conditions in the system are calibrated in a modeling solution containing the same components as the electrolyte (with the exception of chromium sulfate which is replaced by an equivalent amount of aluminum sulfate), by the reaction of discharge of hydronium ions. It is shown that reactions of discharge of hydronium ions and incomplete reduction of trivalent chromium ions occur in a diffusion mode. The Cr(III)-Cr(II) system is classified with quasi-reversible redox electrodes and is described by the known equation for diffusion kinetics. The electrodeposition of metallic chromium occurs in the mixed kinetics mode     

Hydrogen chromate PVC matrix membrane sensor for potentiometric determination of chromium(III) and chromium(VI) ions

A novel potentiometric Cr(6+) PVC matrix membrane sensor incorporating nickel tris(1,10-bathophenanthroline) hydrogen chromate as an electroactive material and 2-nitrophenyl phenyl ether as solvent mediator is described. In a phosphate buffer solution of pH 5, the sensor displays a rapid and linear response for Cr(6-) over the concentration range 2 x 10(-2)-8 x 10(-6) M with an anionic slope of 55.5 +/- 0.2 mV decade(-1) and a detection limit of the order of 0.4 microg ml(-1). The sensor is used for sequential determination of Cr(6+) and Cr(3+) by direct monitoring of Cr(6+) followed by oxidation of Cr(3+) and measurement of the total chromium. The average recoveries of Cr(3+) and Cr(6+) at concentration levels of 0.5-50 microg ml(-1) are 98.1 +/- 0.4% and 99.1 +/- 0.4% respectively. Redox and precipitation titrations involving Cr(6+) as a titrant are monitored with the sensor. Cr(3+) and/or Cr(6+) in wastewaters of some industries (e.g., leather tanning, electroplating, aluminum painting) and the chromium contents of some alloys and refractory bricks are assessed. The results agree fairly well with data obtained using the standard diphenylcarbazide spectrophotometric method.     

Optimizing millisecond time scale near-infrared emission in polynuclear chrome(III)-lanthanide(III) complexes

This work illustrates a simple approach for optimizing long-lived near-infrared lanthanide-centered luminescence using trivalent chromium chromophores as sensitizers. Reactions of the segmental ligand L2 with stoichiometric amounts of M(CF(3)SO(3))(2) (M = Cr, Zn) and Ln(CF(3)SO(3))(3) (Ln = Nd, Er, Yb) under aerobic conditions quantitatively yield the D(3)-symmetrical trinuclear [MLnM(L2)(3)](CF(3)SO(3))(n) complexes (M = Zn, n = 7; M = Cr, n = 9), in which the central lanthanide activator is sandwiched between the two transition metal cations. Visible or NIR irradiation of the peripheral Cr(III) chromophores in [CrLnCr(L2)(3)](9+) induces rate-limiting intramolecular intermetallic Cr→Ln energy transfer processes (Ln = Nd, Er, Yb), which eventually produces lanthanide-centered near-infrared (NIR) or IR emission with apparent lifetimes within the millisecond range. As compared to the parent dinuclear complexes [CrLn(L1)(3)](6+), the connection of a second strong-field [CrN(6)] sensitizer in [CrLnCr(L2)(3)](9+) significantly enhances the emission intensity without perturbing the kinetic regime. This work opens novel exciting photophysical perspectives via the buildup of non-negligible population densities for the long-lived doubly excited state [Cr*LnCr*(L2)(3)](9+) under reasonable pumping powers.     

Structural studies and quantum chemical calculations of Cr(III), Fe(III) and Ru(III) bromazepam complexes

The reaction of bromazepam (7‐bromo‐1,3‐dihydro‐5‐(2‐pyridyl)‐2H ‐1,4‐benzodiazepin‐2‐one, BZM) with Cr(III) ( 1 ), Fe(III) ( 2 ) and Ru(III) ( 3 ) salts gives complexes of the type [M(BZM)₃]⋅3X (X = Cl or NO₃). Structural characterization was extensively carried out using various analytical and spectral tools such as infrared, ¹H NMR and UV–visible spectroscopies and magnetic, conductance, elemental and thermal analyses. BZM is a bidentate ligand and interacts with the metal ions via the pyridine and benzodiazepin‐2‐one nitrogen atoms. The magnetic and electronic properties of 2 and 3 are consistent with low‐spin octahedral complexes. The three BZM molecules are non‐isoenergetically coordinated to the metal ions and this is reflected in the values of the second‐order interaction energy. The antibacterial activity was studied using Staphylococcus aureus and Escherichia coli . Coordination of BZM to Cr(III) or Ru(III) ions leads to a marked increase in toxicity with respect to the inactive Fe(III) complex 2 .