Preparation of polymer-protected gold/platinum bimetallic clusters and their application to visible light-induced hydrogen evolution

The dispersions of polymer-protected gold/platinum bimetallic clusters were easily and reproducibly prepared by refluxing the mixed solutions of tetrachloroaureic(III) acid and hexachloroplatinic(IV) acid in ethanol/water (1/1) at 90 ∼ 95 °C for 2 h in the presence of a protective polymer such as poly(N-vinyl-2-pyrrolidone) (PVP). The gold/platinum bimetallic clusters thus obtained were very small, well dispersed and very stable. The UV-Vis spectra and the transmission electron micrographs have indicated that each bimetallic particle has an alloy structure consisting of both gold and platinum atoms, and that the surface of the cluster particle is rich in platinum atoms and the inner core in gold atoms. The gold/platinum bimetallic clusters were used as the multi-electron redox catalysts for visible light-induced hydrogen evolution from water. The rate of hydrogen evolution depended on the mole ratio of the gold/platinum bimetallic clusters. The bimetallic clusters at the mole ratio of Au/Pt = 2/3 were the most active catalyst. The in-situ UV-Vis spectra during the reaction have indicated that the order of the aggregation in the two kinds of metal atoms is very important for structure determination of the Au/Pt bimetallic clusters. The protective polymer PVP plays a role not only in protecting hydrophobic colloidal particles in an aqueous solution, but also in determining the metal composition of the cluster surface.     

Enhanced Magneto‐optical Properties of Semiconductor EuS Nanocrystals Assisted by Surface Plasmon Resonance of Gold Nanoparticles

Remarkable magneto‐optical properties of a new isolator material, that is, europium sulfide nanocrystals with gold (EuS–Au nanosystem), has been demonstrated for a future photo‐information technology. Attachment of gold particles that exhibit surface plasmon resonance leads to amplification of the magneto‐optical properties of the EuS nanocrystals. To construct the EuS–Au nanosystems, cubic EuS and spherical Au nanocrystals have been joined by a variety of organic linkers, that is, 1,2‐ethanedithiol (EDT), 1,6‐hexanedithiol (HDT), 1,10‐decanedithiol (DDT), 1,4‐bisethanethionaphthalene (NpEDT), or 1,4‐bisdecanethionaphthalene (NpDDT) . Formation of these systems was observed by XRD, TEM, and absorption spectra measurements. The magneto‐optical properties of the EuS–Au nanosystem have been characterized by using Faraday rotation spectroscopy. The Faraday rotation angle of the EuS–Au nanosystem is dependent on the Au particle size and interparticle distance between EuS and Au nanocrystals. Enhancement of the Faraday rotation of EuS–Au nanosystems was observed. The spin configuration in the excited state of the EuS–Au nanosystem was also investigated using photo‐assisted electron paramagnetic resonance.     

Study of nucleation and growth mechanism of the metallic nanodumbbells

We propose a general nucleation and growth model that can explain the mechanism of the formation of CoPt(3)/Au, FePt/Au, and Pt/Au nanodumbbells. Thus, we found that the nucleation event occurs as a result of reduction of Au(+) ions by partially oxidized surface Pt atoms. In cases when Au(3+) is used as a gold precursor, the surface of seeds should be terminated by ions (e.g., Co(2+), Pb(2+)) that can reduce Au(3+) to Au(+) ions, which can further participate in the nucleation of gold domain. Further growth of gold domain is a result of reduction of both Au(3+) and Au(+) by HDA at the surface of gold nuclei. We explain the different ability of CoPt(3), Pt, and FePt seeds to serve as a nucleation center for the reduction of gold and further growth of dumbbells. We report that the efficiency and reproducibility of the formation of CoPt(3)/Au, FePt/Au, and Pt/Au dumbbells can be optimized by the concentration and oxidation states of the surface ions on metallic nanocrystals used as seeds as well as by the type of the gold precursor.     

Hydrogen chemisorption on Al2O3-supported gold catalysts

Hydrogen is dissociatively adsorbed on the gold particles in Au/Al(2)O(3) catalysts, as demonstrated by a combination of in-situ X-ray absorption spectroscopy, chemisorption, and H/D exchange experiments. This chemisorption of hydrogen induces changes in the Au L(3) and L(2) X-ray absorption near-edge structures. The gold atoms on corner and edge positions dissociate the hydrogen, which does not spill over to the face sites. Therefore, the average number of adsorbed hydrogen atoms per surface gold atom increases with decreasing particle size. With temperature, the hydrogen uptake by supported gold increases or remains constant, whereas it decreases for platinum. Furthermore, in H/D exchange experiments, the activity of Au/Al(2)O(3) increases strongly with temperature. Thus, the dissociation and adsorption of hydrogen on gold is activated.     

Matter of age: growing anisotropic gold nanocrystals in organic media

We investigated the influence of the reduction state of gold ions on the growth of gold nanocrystals in N,N-dimethyl formamide (DMF). While freshly prepared solutions of AuCl3 produce spherical nanocrystals, aged precursor solutions containing mainly Au+ ions and Au(0) atoms lead to various branched nanoparticles. Furthermore, we show that also the amount of the reducing and stabilisation agent tetra-n-octylammonium formate (TOAF) plays a decisive role on the shape of the nanocrystals, allowing us to grow triangular and cubic nanoparticles.     

High-yield Synthesis of Branched Gold Nanocrystals by a Sodium Diphenylamine-4-Sulfonate Reduction Process in Polyethylene Glycol Aqueous Solution

For developing new excellent electrocatalysts toward methanol and oxygen, branched Au nanocrystals have been prepared in high yield by the reaction of HAuCl₄ and sodium diphenylamine‐4‐sulfonate in the presence of PEG (polyethylene glycol) at room temperature. When the amount of PEG was in the range of 1–3 mL, branched Au nanocrystals were all obtained, and the amounts of sodium diphenylamine‐4‐sulfonate and HAuCl₄ had no obvious effect on the morphology of gold nanocrystals. PEG molecules play an important role in the formation of branched gold nanocrystals. The nanocrystals were characterized by transmission electron microscopy (TEM), selected area electron diffraction, high‐resolution transmission electron microscopy (HRTEM) and UV‐Vis absorption spectrum. HRTEM research suggests that the tips of gold nanocrystals grow selectively in the [111] directions. The UV‐Vis absorption spectrum displays two‐separated surface plasmon resonance peaks.     

Studies on the electrochemical growth of (Per)2[Au(mnt)2

The first stages of the electrocrystallization of (Per)(2)[Au(mnt)(2)] salt from dichloromethane on gold, platinum, and highly orientated pyrolytic graphite (HOPG) were investigated by cyclic voltammetry, atomic force microscopy, and X-ray photoelectron spectroscopy in order to understand the determinant factors for nucleation and crystal growth. The crystal growth occurs from adsorbed films of dithiolate on gold or platinum and of perylene on HOPG, after homogeneous nucleation, and it is controlled by the low diffusion of the species toward the growing surface.     

Remarkable CO-catalyst effect of gold nanoclusters on olefin oxidation catalyzed by a manganese-porphyrin complex

The effect of dodecanethiolate-protected metallic nanoclusters of gold (Au:SC12, 1), silver (Ag:SC12), palladium (Pd:SC12), and platinum (Pt:SC12) on the catalytic activity of Mn(TPP)Cl (TPP = tetraphenylporphinato) was investigated in styrene oxidation with iodosylbenzene. Among the four metal clusters, only Au:SC12 led to appreciable acceleration of the catalytic reaction. The major role of the Au cluster was to regenerate the active catalytic path involving Mn(III) and Mn(V) from the deactivated Mn(IV) species. The binary 1/Mn(TPP)Cl catalyst system showed an absorption spectrum characteristic of Mn(III)-porphyrin after reaction, whereas a catalytically ineffective Mn(IV) species was observed as the sole porphyrin species in the absence of the Au cluster or in the presence of Pd, Ag, and Pt clusters. Accordingly, the slow oxidation reaction with Mn(TPP)Cl was accelerated by the addition of Au:SC12, and complete conversion of Mn(IV) into Mn(III) was observed in the absorption spectrum. 1H NMR inspection of the reaction of Au:SC12 and iodosylbenzene revealed that the surface dodecyl groups were partially oxidized into dodecanal and eliminated from the cluster surface, thereby producing unprotected gold sites on the surface. A reactivation mechanism involving the reaction of the Mn-porphyrin and the oxidant activated on the gold surface is proposed.     

Polypyrrole–gold nanostructured composite,active and durable electrocatalytic material

The consequences of treatment of gold nanocrystals present in polypyrrole–gold composites and electrodeposited gold nanocrystals (PPY–Au and Au NPs) with OH radicals generated in Fenton’s reaction were investigated. Particularly, the changes in the morphology and the electrochemical properties of those materials are shown. For both materials, the etching effect was noticed. Contrary to significantly reduced catalytic activity, the changes observed in size and shape of gold nanostructures were less pronounced. In the case of PPY–Au composite material, the etching effects were less intense. Even after a 60-min radical treatment of the PPY–Au composite material, the gold–nanocrystal catalytic activity remained high. The limited dissolution of the gold nanocrystals in the PPY–Au composites, compared to bare Au NPs, can be explained by the presence of the polymer which served as a kind of protective barrier against the oxidizing agent. A decrease in the electrocatalytic properties vs. the electrooxidation of ethanol of both forms of gold nanocrystals were observed after the treatment with hydroxyl radicals.     

组装在贵金属基底上的金纳米粒子对CO的电化学催化氧化

研究了组装在Au, Pt电极表面的金纳米粒子对CO的电化学催化氧化行为, 首次在实验上观察到较大粒径金纳米粒子(粒径＞10 nm)对CO的电催化氧化活性. 考察了金粒子表面金氧化物对粒子电催化活性的影响, 发现表面金氧化物的形成是金纳米粒子对CO具有电催化氧化活性的前提. 对于相同粒径的金纳米粒子, 随着粒子表面金氧化物量的增加,催化活性增大.     

Cysteamine-modified ZIF-8 colloidal building blocks: Direct assembly of nanoparticulate MOF films on gold surfaces via thiol chemistry

Chemical modification of metal organic framework (MOF) nanocrystal colloids was used to endow them with chemical affinity for gold substrates. Modified nanocrystals were then used as building blocks for rapid and selective self-assembly of porous films. Cysteamine (Cys, 2-aminoetanethiol) was chosen as both chemical modulator and functionalizing agent of Zeolite Imidazolate Framework-8 (ZIF-8) MOF nanocrystals. Important parameters such as the impact of the modulator on the range of nanocrystals stability, size, polydispersity, morphology, and crystalline structure were assessed via both, small and wide angle x-ray scattering (SAXS and WAXS). Cysteamine modified ZIF-8 nanocrystals were assembled into films over conductive Au substrates and film growth was followed in-situ with Quartz Crystal Microbalance (QCM). Thiol moieties exposed out of the ZIF-8 surface after cysteamine modification, results in the formation of thiol bonds with Au conductive substrates as shown via Cyclic Voltammetry experiments. The strategy here presented allows for the synthesis of pre-designed building blocks for MOF films on metal surfaces.     

Ultrastable Au nanocatalyst supported on surface-modified TiO2 nanocrystals

The surfaces of TiO2 nanocrystals were modified with amorphous aluminum-oxide layers using a surface sol-gel process to control the interaction between supports and metal particles. Ultrastable Au nanocatalysts were prepared by the deposition of Au nanoparticles on the surface-modified TiO2 nanocrystals using a deposition-precipitation (DP) method. The TEM analysis showed that the Au nanoparticles on the surface-modified nanocrystal supports were highly stable with a sinter-resistant capability during high-temperature calcination. The HRTEM analysis revealed that the surface of the TiO2 nanocrystals was covered by an amorphous aluminum-oxide layer and the Au nanoparticles were primarily anchored to this amorphous layer. This amorphous aluminum-oxide layer played an extremely important role in the stabilization of the supported Au nanoparticles without affecting catalytic activities. The surface modification of nanocrystal supports highlights new opportunities in tailoring the stability and activity of supported nanocatalyst systems.     

Electrochemistry of conductive polymers 39. Contacts between conducting polymers and noble metal nanoparticles studied by current-sensing atomic force microscopy

Electrical properties of contacts formed between conducting polymers and noble metal nanoparticles have been examined using current-sensing atomic force microscopy (CS-AFM). Contacts formed between electrochemically prepared pi-conjugated polymer films such as polypyrrole (PPy), poly(3-methylthiophene) (P3MeT), as well as poly(3,4-ethylenedioxythiophene) (PEDOT) and noble metal nanoparticles including platinum (Pt), gold (Au), and silver (Ag) have been examined. The Pt nanoparticles were electrochemically deposited on a pre-coated PPy film surface by reducing a platinum precursor (PtCl62-) at a constant potential. Both current and scanning electron microscopic images of the film showed the presence of Pt islands. The Au and Ag nanoparticles were dispersed on the P3MeT and PEDOT film surfaces simply by dipping the polymer films into colloid solutions containing Au or Ag particles for specified periods (5 to approximately 10 min). The deposition of Au or Ag particles resulted from either their physical adsorption or chemical bonding between particles and the polymer surface depending on the polymer. When compared with PPy, P3MeT and PEDOT showed a stronger binding to Au or Ag nanoparticles when dipped in their colloidal solutions for the same period. This indicates that Au and Ag particles are predominantly linked with the sulfur atoms via chemical bonding. Of the two, PEDOT was more conductive at the sites where the particles are connected to the polymer. It appears that PEDOT has better aligned sulfur atoms on the surface and is strongly bonded to Au and Ag nanoparticles due to their strong affinity to gold and silver. The current-voltage curves obtained at the metal islands demonstrate that the contacts between these metal islands and polymers are ohmic.     

Synthesis of hybrid CdS-Au colloidal nanostructures

We explore the growth mechanism of gold nanocrystals onto preformed cadmium sulfide nanorods to form hybrid metal nanocrystal/semiconductor nanorod colloids. By manipulating the growth conditions, it is possible to obtain nanostructures exhibiting Au nanocrystal growth at only one nanorod tip, at both tips, or at multiple locations along the nanorod surface. Under anaerobic conditions, Au growth occurs only at one tip of the nanorods, producing asymmetric structures. In contrast, the presence of oxygen and trace amounts of water during the reaction promotes etching of the nanorod surface, providing additional sites for metal deposition. Three growth stages are observed when Au growth is performed under air: (1) Au nanocrystal formation at both nanorod tips, (2) growth onto defect sites on the nanorod surface, and finally (3) a ripening process in which one nanocrystal tip grows at the expense of the other particles present on the nanorod. Analysis of the hybrid nanostructures by high-resolution TEM shows that there is no preferred orientation between the Au nanocrystal and the CdS nanorod, indicating that growth is nonepitaxial. The optical signatures of the nanocrystals and the nanorods (i.e., the surface plasmon and first exciton transition peaks, respectively) are spectrally distinct, allowing the different stages of the growth process to be easily monitored. The initial CdS nanorods exhibit band gap and trap state emission, both of which are quenched during Au growth.     

Charge separation in heterostructures of InP nanocrystals with metal particles

The optical and electron paramagnetic resonance (EPR) properties of InP nanocrystals, in which metallic gold or indium is present as an incorporated part of the nanocrystals, have been studied. A study of Au/InP quantum rods supports different carrier localization regimes compared to metal-free quantum rods, including the charge-separated state for which the electron and hole are located in different parts of the heterostructure. They also show that elongated semiconductors that grow on metallic catalysts have electronic properties that are different from those of pure semiconductor nanocrystals of the same shape. We have also developed a simple method for growing melted indium particles on the surface of colloidal spherical InP nanocrystals, and in these In/InP nanocrystals the emission is completely quenched while the absorption spectrum moves to red due to the strong mixing of the semiconductor and metal electronic states.     

Electrochemical/electrospray mass spectrometric studies of I- and SCN- at gold and platinum electrodes: direct detection of (SCN)3-

Results on the electrochemistry of I- and SCN- at gold and platinum electrodes using an electrochemical cell coupled to an electrospray mass spectrometer are reported. We demonstrate that our apparatus is capable of these very challenging electrochemical/electrospray experiments and that B(C6H5)4- is a suitable internal standard for negative-ion studies in acetonitrile. With I- at a platinum electrode, we observe well-behaved oxidation to I3-. Experiments on I- at gold electrodes are more complex, showing AuI2- as well as I3-. The AuI2- mass spectrometric ion intensity varies in a complex way throughout the applied electrochemical voltage range studied; we propose that this variation involves the adsorption of I- on the gold electrode surface. In experiments on SCN- from (C4H9)4NSCN at gold electrodes, we observe Au(SCN)2-. Finally, at platinum electrodes, we directly observe (SCN)3-, a species analogous to I3- and (CN)3- that has been previously postulated but unverified. This important finding was confirmed by the isotope pattern and demonstrates the stability of the anion.     

Mesoporous Au/TiO2 nanocomposite microspheres for visible-light photocatalysis

Mesoporous Au/TiO(2) nanocomposite microspheres have been synthesized by using a microemulsion-based bottom-up self-assembly (EBS) process starting from monodisperse gold and titania nanocrystals as building blocks. The microspheres had large surface areas (above 270 m(2) g(-1)) and open mesopores (about 5 nm), which led to the adsorption-driven concentration of organic molecules in the vicinity of the microspheres. Au nanoparticles, which were stably confined within the microspheres, enhanced the absorption over the broad UV/Vis/NIR spectroscopic range, owing to their strong surface plasmon resonance (SPR); as a result, the Au nanoparticles promoted the visible-light photo-induced degradation of organic compounds.     

Preparation and structural characterization of RuS2 nanoislands on Au(111)

Among all the transition metal sulfides, ruthenium sulfide (RuS2) has been shown to be the most active catalyst for the hydrodesulfuriztion processes. Using X-ray photoemission spectroscopy (XPS) and scanning tunneling microscopy (STM), we have found a novel approach for the preparation of RuS2 nanoislands on an Au(111) substrate. Chemical vapor deposition of Ru3(CO)12 leads to metallic Ru nanoclusters on the gold substrate. Although sulfidation has not been observed on extended Ru (0001) surface, Ru nanoclusters react with S2, forming ruthenium sulfide. While the majority of the sulfide is in the form of nanosized clusters that aggregate into clustered islands, a small fraction of the sulfide is seen as flat islands. When Ru3(CO)12 was deposited on a sulfur-modified gold substrate at elevated temperature, flat islands of ruthenium sulfide are formed exclusively. The flat islands are single-layer RuS2 nanocrystals with a (111) surface termination which exhibits an ordered array of sulfur vacancies. On such RuS2 (111) surfaces, excess sulfur is stable at low temperature and induces surface reconstruction, and desorbs at high temperature. The RuS2(111)/Au system provides an excellent model system for ruthenium sulfide catalysts.     

DFT study of oxygen adsorption on modified nanostructured gold pyramids

Periodic DFT calculations are used to predict and investigate the adsorption behavior of molecular oxygen on Au, Au/Pt, and Pt surfaces. To obtain an array of pyramids containing surface atoms with the lowest possible coordination number, a nano-modified surface consisting of a symmetrically "modified" (100) surface was used. The effect of atom substitution (organized alloying) is investigated. The adsorption of molecular oxygen on a pure gold pyramid is exothermic by 0.77 eV for the end-on adsorption mode. In the case of a pure platinum pyramid, the end-on adsorption mode was found to dissociate; however, a side-on geometry was encountered with an energy of adsorption of 2.3 eV. This value is in line with the fact that the adsorption energy of small molecules does not vary much on Pt surfaces with different indices. Additionally, some geometrically related trends of the surface deformation in relation to its composition and after adsorption of molecular oxygen are highlighted.     

Growth kinetics of platinum nanocrystals prepared by two different methods: role of the surface

In order to examine the applicability of the diffusion-limited Ostwald ripening model to the growth kinetics of nanocrystals, platinum nanocrystals prepared by two different methods have been investigated by a combined use of small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). One of the methods of synthesis involved the reduction of chloroplatinic acid by sodium citrate while in the other method reduction was carried out in the presence of polyvinylpyrrolidone (PVP) as a capping agent. The growth of platinum nanocrystals prepared by citrate reduction in the absence of any capping agent follows a Ostwald ripening growth with a D(3) dependence. In the presence of PVP, the growth of platinum nanocrystals does not completely follow the Ostwald ripening model, making it necessary to include a surface reaction term in the growth equation. Thus, the growth of platinum nanocrystals in the presence of PVP has contributions both from diffusion and surface reaction, exhibiting a D(3)+D(2) type behavior.