Synthesis and supramolecular self-assembly study of a novel porphyrin molecule in Langmuir and Langmuir-Blodgett films

The self-assembly and supramolecular engineering of porphyrins into ordered arrays have recently attracted much interest because of their promising application potential in molecular and electronic devices, spintronics, energy harvesting and storage, catalysis, and sensor development. We herein report the synthesis and supramolecular self-assembly study of a novel porphyrin molecule, 2Por-TAZ, in Langmuir and Langmuir-Blodgett films. The 2Por-TAZ molecule contains two porphyrin macrocycles attached to a triaminotriazine headgroup. Triaminotriazines are known to form a highly ordered linear supramolecular self-assembly through complementary hydrogen bonding with barbituric acid molecules at the air-water interface. Surface pressure-area isotherm measurements and polarized UV-vis absorption spectroscopic studies indicate that the 2Por-TAZ molecules adopted an edge-on orientation at the air-water interface. Polarized UV-vis absorption study also revealed that the 2Por-TAZ molecules formed linear supramolecular networks on pure water and barbituric acid subphase with porphyrin flat planes facing toward the compression direction. The binding of barbituric acid with 2Por-TAZ molecules was observed from the expansion of the Langmuir monolayer film. Compared to the transferred LB film from pure water subphase, both the UV-vis absorbance and fluorescence emission intensity of the LB film transferred from barbituric acid subphase increased significantly.     

Langmuir-Blodgett films of octadecanethiol--properties and potential applications

Octadecanethiol (ODT) is known to form self-assembled monolayer on noble metal surfaces which has potential technological applications. Langmuir-Blodgett (LB) technique is another useful method of obtaining highly ordered assembly of molecules. It is of interest to find whether ODT molecules can also form a stable Langmuir monolayer which facilitates the preparation of LB films. In literature, it has been reported that ODT molecules form an unstable Langmuir monolayer. We have studied the stability of the monolayer of the ODT molecules at air-water interface using surface manometry and microscopy techniques. We find the monolayer to be stable on ultrapure water of resistivity greater than 18MOmega cm. However, the behavior changes in the presence of even small amount of additives like NaOH or CdCl2 in the subphase. Our AFM studies on the LB films of ODT deposited from ion-free ultrapure water showed streak-like bilayer domains. The LB films of ODT deposited from CdCl2 containing aqueous subphase yield dendritic domains of the complexed unit grown over ODT monolayer. These nanostructures on surfaces may have potential applications in molecular electronics.     

Formation of complex Langmuir and Langmuir-Blodgett films of water soluble rosebengal

This communication reports the formation of complex Langmuir monolayer at the air-water interface by charge transfer types of interaction with the water soluble N-cetyl N,N,N-trimethyl ammonium bromide (CTAB) molecules doped with rosebengal (RB), with the stearic acid (SA) molecules of a preformed SA Langmuir monolayer. The reaction kinetics of the formation of RB-CTAB-SA complex monolayer was monitored by observing the increase in surface pressure with time while the barrier was kept fixed. Completion of interaction kinetics was confirmed by FTIR study. This complex Langmuir films at the air-water interface was transferred onto solid substrates at a desired surface pressure to form multilayered Langmuir-Blodgett films. Spectroscopic characterizations reveal some molecular level interactions as well as formation of microcrystalline aggregates depending upon the molar ratios of CTAB and RB within the complex LB films. Presence of two types of species in the complex LB films was confirmed by fluorescence spectroscopy.     

Self-assembly of amphiphilic hexapyridinium cations at the air/water interface and on HOPG surfaces.

Mono- and multilayers of a novel amphiphilic hexapyridinium cation with six eicosyl chains (3) are spread at the air/water interface as well as on highly ordered pyrolytic graphite (HOPG). On water, the monolayer of 3 is investigated by recording surface pressure/area and surface potential/area isotherms, and by Brewster angle microscopy (BAM). Self-organized tubular micelles with an internal edge-on orientation of molecules form at the air/water interface at low surface pressure whereas multilayers are present at high surface pressure, after a phase transition. Packing motifs suggesting a tubular arrangement of the constituting molecules were gleaned from atomic force microscopy (AFM) investigations of Langmuir-Blodgett (LB) monolayers being transferred on HOPG at different surface pressures. These LB film structures are compared to the self-assembled monolayer (SAM) of 3 formed via adsorption from a supersaturated solution, which is studied by scanning tunnelling microscopy (STM). On HOPG the SAM of 3 consists of nanorods with a highly ordered edge-on packing of the aromatic rings and an arrangement of alkyl chains which resembles the packing of molecules at the air/water interface at low surface pressure. Additional details of the molecular packing were gleaned from single-crystal X-ray structure analysis of the hexapyridinium model compound 2b, which possesses methyl instead of eicosyl residues.     

Structures of 17,19-hexatriacontadiyne monolayers on Au(111) studied by infrared reflection absorption spectroscopy and scanning tunneling microscopy

The aggregation and reaction of 17,19-hexatriacontadiyne molecules are studied on a Au(111) surface. The molecular orientation and arrangement are elucidated by infrared reflection absorption spectroscopy (IRAS) and scanning tunneling microscopy (STM). A vapor-deposited monolayer and a multilayered film formed by adsorption from the solution provide IRA spectra with bands due to the antisymmetric and symmetric stretching of methylenes in the gauche conformation. After the adsorbed film is rinsed with the solvent, however, the spectrum loses the gauche bands and is characterized by the enhanced C-H(distal) and C-H(proximal) stretching bands, which means that all-trans molecules are laid flat. Only STM images for the rinsed film display columnar structures on the herringbones of the reconstructed Au(111) surface; the alkyl chain direction is found to be parallel to the Au atom row. The results indicate that an ordered monolayer is formed first at the liquid-solid interface, and then, disordered overlayers with the gauche conformation are grown but removed by a rinse. Upon exposure to UV light, thus obtained monomer columns are converted into oligomers with flexible backbones and an increased gauche population in the alkyl chains, which resemble red phase polydiacetylenes in LB films.     

Organization and properties of a conjugated poly(heteroarylene methines) at the air-water interface and in the Langmuir-Blodgett films

A poly(heteroarylene methine) derivative, poly[(2,5-thiophenediyl) (p-n-methyl, n-octylaminobenzylidene) (2,5-thiophenequinodimethaneiyl)] (PTABQ), has been synthesized and spread at the air-water interface. The influences of three kinds of solutions on PTABQ monolayer behavior at the air-water interface have been investigated via the measurements of the pi-A isotherm and film stability. The results show that all three kinds of PTABQ solutions are apt to form the stable and transferable monolayer film organized with the plane of its pi-system nearly perpendicular to the air-water interface. Moreover, the monolayer-forming ability of PTABQ can be improved by introducing a water-soluble amphiphilie as an extractable spread-aiding component, which is further proved by the AFM images and FTIR spectra of the transferred films. UV-visible absorption spectra indicate that the well-ordered layer-by-layer structure is successfully controlled in the LB films. The optical bandgap of PTABQ is reduced for the ordered arrangement of its molecules in LB films. The intrinsic electrical conductivity of PTABQ LB films is 8.1 x 10(-8) S/cm and the conductivity of iodine-doped films is 5.7 x 10(-7) S/cm.     

Self-assembled nanostructures of oligopyridine molecules

The high potential of self-assembly processes of molecular building blocks is reflected in the vast variety of different functional nanostructures reported in the literature. The constituting units must fulfill several requirements like synthetic accessibility, presence of functional groups for appropriate intermolecular interactions and depending on the type of self-assembly processsignificant chemical and thermal stability. It is shown that oligopyridines are versatile building blocks for two- and three-dimensional (2D and 3D) self-assembly. They can be employed for building up different architectures like gridlike metal complexes in solution. By the appropriate tailoring of the heterocycles, further metal coordinating and/or hydrogen bonding capabilities to the heteroaromatic molecules can be added. Thus, the above-mentioned architectures can be extended in one-step processes to larger entities, or in a hierarchical fashion to infinite assemblies in the solid state, respectively. Besides the organizational properties of small molecules in solution, 2D assemblies on surfaces offer certain advantages over 3D arrays. By precise tailoring of the molecular structures, the intermolecular interactions can be fine-tuned expressed by a large variety of resulting 2D patterns. Oligopyridines prove to be ideal candidates for 2D assemblies on graphite and metal sufaces, respectively, expressing highly ordered structures. A slight structural variation in the periphery of the molecules leads to strongly changed 2D packing motifs based on weak hydrogen bonding interactions. Such 2D assemblies can be exploited for building up host-guest networks which are attractive candidates for manipulation experiments on the single-molecule level. Thus, "erasing" and "writing" processes by the scanning tunneling microscopy (STM) tip at the liquid/solid interface are shown. The 2D networks are also employed for performing coordination chemistry experiments at surfaces.     

有机HTDIOO分子LB膜结构的AFM研究

利用原子力显微镜（AFM）对有机分子HTDIOO单层和多层LB膜结构进行了观察·实验结果表明，针尖与LB膜表面分子间的相互作用力会对成像的膜结构有影响．当悬臂针尖与LB膜表面分子的相互作用力较大时，针尖会扰动HTDIOO分子在单层LB膜中的有序排列．HTDIOO单层LB膜具有有序结构；而在多层LB膜中，HTDIOO分子则聚集在一起形成了一定的畴结构．     

有机HTDIOO分子LB膜结构的AFM研究

利用原子力显微镜（ＡＦＭ）对有机分子ＨＴＤＩＯＯ单层和多层ＬＢ膜结构进行了观察。实验结果表明，针尖与ＬＢ膜表面分子间的相互作用力会对成像的膜结构有影响。当悬臂针尖与ＬＢ膜表面分子的相互作用力较大时，针尖会扰动ＨＴＤＩＯＯ分子在单层ＬＢ膜中的有序排列。ＨＴＤＩＯＯ单层ＬＢ膜具有有序结构；而在多层ＬＢ膜中，ＨＴＤＩＯＯ分子则聚集在一起形成了一定的畴结构。     

Photoinduced electron transfer in Langmuir-Blodgett monolayers of porphyrin-fullerene dyads

A series of electron donor-acceptor (DA) dyads, composed of a porphyrin donor and a fullerene acceptor covalently linked with two molecular chains, were used to fabricate solid molecular films with the Langmuir-Blodgett (LB) technique. By means of the LB technique, the DA molecules can be oriented perpendicular to the plane of the substrate. In DHD6ee and its zinc derivative hydrophilic groups are attached to the phenyl moieties in the porphyrin end of the molecule; while in the other three dyads, TBD6a, TBD6hp, and TBD4hp, the hydrophilic groups are in the fullerene end of the molecule. This makes it possible to alternate the orientation of the molecules in two opposite directions with respect to the air-water interface and to fabricate molecular assemblies in which the direction of the primary photoinduced vectorial electron transfer can be controlled both by the deposition direction of the LB monolayer and by the selection of the used DA molecule. This was proved by the time-resolved Maxwell displacement charge measurements. The spectroscopic properties of the DA films were studied with the steady-state absorption and fluorescence methods. In addition, the time correlated single photon counting technique was used to determine the fluorescence properties of the dyad films.     

Influence of the environment on photoinduced electron transfer: comparison between organized monolayers at the air-water interface and monolayer assemblies on glass

Photoinduced electron transfer (PET) has been investigated in organized monolayers at the air-water interface and in monolayer assemblies on glass in an effort to evaluate the influence of solvent reorganization and molecular dynamics on PET. The donor monolayer contained an amphiphilic thiacyanine dye, and the electron acceptors were methyl viologen and dioctadecyl viologen, respectively. The distance dependence is described here by a hard disk model, where an acceptor molecule within a disk with a radius rDA around the excited donor molecule quenches the donor fluorescence due to electron transfer. Acceptor molecules outside the disk are considered ineffective. The critical radius rDA is larger in monolayer assemblies on glass (rDA = 1.97 nm) than at the air-water interface (rDA = 1.15 nm) as evaluated from steady-state fluorescence quenching. This large difference indicates that the time between thermal collisions generating and destroying the energetic match required for electron tunneling from the excited donor molecule to the acceptor is quite different in the two systems that are compared.     

Self-assembled spiral nanoarchitecture and supramolecular chirality in Langmuir-Blodgett films of an achiral amphiphilic barbituric acid

An amphiphilic barbituric acid derivative was found to form stable monolayers showing a clear phase transition at the air/water interface. It is interesting to find that the deposited Langmuir-Blodgett (LB) films of the compound showed circular dichroism (CD) although the molecule itself was achiral. AFM measurements on the transferred one-layer LB film revealed that spiral nanoarchitectures were formed. It was further found that the supramolecular chirality of the LB films was related to symmetry breaking at the interface. Hydrogen bonding and the pi-pi stacking between the neighboring molecules resulted in chiral fibers which formed the spiral structures. To the best of our knowledge, this is the first report on the chirality of the molecular assemblies and spiral nanostructures formed through the air/water interface by achiral molecules.     

Effect of water and air-water interface on the structural modification of Ni-arachidate Langmuir-Blodgett films

Nickel arachidate (NiA) Langmuir-Blodgett (LB) films have been deposited on hydrophilic Si(0 0 1) substrates by three (up-down-up) and five (up-down-up-down-up) strokes. During deposition, substrates were kept inside the water subphase for different times after each down stroke. Structural information of all the LB films have been obtained from X-ray reflectivity (XRR) studies. One and two symmetric monolayer (SML) was deposited on top of the asymmetric monolayer (AML) in three and five stokes respectively. All the preformed LB films were then used to go through the air-water interface with the same speed that was used at the time of film deposition. Structural information obtained from the XRR studies show that mainly the top layer density decreases after passing through the air-water interface but the layered structure remains the same. Information obtained from both the XRR and atomic force microscopy (AFM) studies suggest that molecules peeled from the top SML layer do not reincorporate with the LB film through tail-tail hydrophobic interaction. Our study shows that NiA LB film has better stability compared with cadmium arachidate LB film inside the water subphase without forming any out-of-plane molecular reorganization.     

不同取代位置的萘衍生两亲分子在气/液界面组装膜中的螺旋结构与圆偏振发光

Langmuir-Blodgett(LB)技术可在二维气/液界面上精确地控制分子之间的排列及堆积方式, 构建有序超薄膜及纳米组装体. 同时, 界面这一不对称环境也可有效放大组装体的手性信息, 实现超分子体系中的手性传递和手性放大. 本文研究了萘环取代位置不同的两种手性两亲分子——N,N′-双十八烷基-α-萘-L-氨基-谷氨酸二酰胺(1NLG)和N,N′-双十八烷基-β-萘-L-氨基-谷氨酸二酰胺(2NLG)在气/液界面的铺展及组装行为, 发现同分异构效应影响了两亲分子在界面的排列, 1NLG组装形成了均一的纳米带状结构, 而2NLG则形成了左手螺旋结构, 并且2NLG薄膜表现出圆偏振发光(CPL)性质, 其不对称因子(g_lum)比三维体相组装体(超分子凝胶)大23倍, 表明界面促进了超分子手性的放大.     

Synthesis of dehydrobenzo[18]annulene derivatives and formation of self-assembled monolayers: implications of core size on alkyl chain interdigitation

The synthesis of a series of dodecadehydrotribenzo[18]annulene ([18]DBA) derivatives is reported, together with their steady-state absorption and fluorescence properties. The main focus, though, is on the self-assembly of these compounds at the liquid-solid interface as investigated with scanning tunneling microscopy (STM), highlighting the effect of alkyl chain orientation and alkyl chain length on the molecular ordering. Owing to the large triangular pi-electron system of the [18]DBAs, two different types of alkyl chain orientation are observed. The observed changes in the monolayer networks upon elongation of the alkyl chains are attributed to the increased van der Waals interactions between molecules and substrate. The effect of the core size on the alkyl chain orientation and, as a result, the monolayer structure is discussed in relation to the results obtained previously for triangularly-shaped dehydrobenzo [12]annulene ([12]DBA) derivatives and triphenylene derivatives. A guideline for substituent spacing allowing control of molecular alignment for large planar pi-electron systems utilizing directional alkyl chain interdigitation is also discussed.     

Incorporation and manipulation of coronene in an organic template structure

A two-dimensional molecular template structure of 1,3,5-benzenetricarboxylic acid (trimesic acid, TMA) was formed on a highly oriented pyrolytic graphite surface (HOPG) by self-assembly at the liquid-solid interface. Scanning tunneling microscopy (STM) investigations show high-resolution images of the porous structure on the surface. After the host structure was created, coronene molecules were inserted as guest molecules into the pores. STM results indicate that some of the guest molecules rotate inside their molecular bearing. Further investigations show that single coronene molecules can be directly kicked out of their pores by means of STM.     

胆红素有序分子膜的行为研究

研究了不同亚相表面胆红素(BR)单分子膜和LB膜的性质,讨论了胆红素分子在有序分子膜中的堆积密度、分子伸展和金属离子配位。在气-水界面,BR与金属离子的配位导致BR单分子截面积、崩溃压和可见紫外光谱的变化。原子力显微镜表明BR-Cu单分子膜的厚渡为1.23 nm。     

Difference in Surface Properties between Insoluble Monolayer and Adsorbed Film from Kinetics of Water Evaporation and BAM Image

The evaporation rate of water molecules across three kinds of interfaces (air/water interface (1), air/surfactant solution interface (2), and air/water interface covered by insoluble monolayer (3)) was examined using a remodeled thermogravimetric balance. There was no difference in both the evaporation rate and the activation energy for the first two interfaces for three types of surfactant solutions below and above the critical micelle concentration (cmc). This means that the molecular surface area from the Gibbs surface excess has nothing to do with the evaporation rate. In the third case, the insoluble monolayer of 1-heptadecanol decreased the evaporation rate and increased the activation energy, indicating a clear difference between an insoluble monolayer and an adsorbed film of soluble surfactant. This difference was substantiated by BAM images, too. The images of three surfactant solution interfaces were similar to that of just the water surface, while distinct structures of molecular assemblies were observed for the insoluble monolayer. The concentration profile of water molecules in an air/liquid interfacial region was derived by Fix's second law. The profile indicates that a definite layer just beneath the air/liquid interface of the surfactant solution is made mostly of water molecules and that the layer thickness is a few times the root-mean-square displacement %@mt;sys@%%@rl;;@%2%@ital@%Dt%@rsf@%%@rlx@%%@mx@% of the water molecules. The thickness was found to be more than a few nanometers, as estimated from several relaxation times derived from the other kinetics than evaporation of amphiphilic molecules in aqueous systems and a maximum evaporation rate of purified water.     

Langmuir-Blodgett thin films of quantum dots: synthesis, surface modification, and fluorescence resonance energy transfer (FRET) studies

We describe herein studies on as-prepared hydrophobic ZnS-CdSe quantum dots (QDs) at the air-water interface. Surface pressure-area (pi-A) isotherms have been used to study the monolayer behavior. Uniform, lamellar multilayer thin films of QDs were deposited by the Langmuir-Blodgett (LB) technique. The role of two different surfactant systems commonly employed in the synthesis of these QDs (trioctylphosphine oxide-octadecylamine (TOPO-ODA) system and trioctylphosphine oxide-tetradecylphosphonic acid (TOPO-TDPA) system) on the monolayer behavior and the quality of thin films produced has been investigated. The thin films were characterized by quartz crystal microgravimetry (QCM), contact angle measurements, fluorescence spectroscopy, and transmission electron microscopy (TEM). These QD films were further modified by an amphiphilic polymer, poly(maleic anhydride-alt-1-tetradecene) (PMA). The hydrophobic interaction between the polymers and the surfactants attached to the QDs drove the self-assembly process. The carboxylic acid functional groups in the polymer were also used to immobilize avidin. We have demonstrated a proof of concept for the biosensing strategy wherein the avidin-coated QD films attracted biotinylated gold nanoparticles, resulting in fluorescence resonance energy transfer (FRET) quenching of the thin films.     

J-aggregation and its characterization in Langmuir-Blodgett films of merocyanine dyes

Langmuir-Blodgett (LB) films are constructed by successively transferring monomolecular layers formed at the air-water interface onto solid substrates. One of the advantages of the LB technique in fabricating molecular aggregates lies in the fact that it can employ various kinds of molecules by mixing them at the air-water interface. The mixed system may exhibit new properties that are not observed for individual components. This method would be useful, for example, in the studies of the formation and control of the J-aggregates of functional dyes that attract attention both in science and technology. In this paper, I review this subject mainly based on our recent results in merocyanines. LB films of merocyanine dyes, mixed with arachidic acid (C(20)), exhibit J-aggregate formation and have been serving as typical systems in revealing the physical and structural aspects of nanosized molecular aggregates constructed as monolayers. In the case of LB films of a merocyanine dye having benzothiazole as donor nucleus (abbreviated as DS), electron spin resonance (ESR) spectroscopy has been successful in determining the characteristic in-plane orientation of dye molecules with respect to the dipping direction, which led to the discovery of the flow orientation effect during the dipping process of LB films as the origin of optical dichroism often observed in LB films. In this article, after an introduction of ESR spectroscopy, three major topics on the merocyanine J-aggregation and its characterization in mixed films are discussed. The first topic is the observation and control of the size of J-aggregates in the dilution limit of dyes in arachidic acid matrix for a methyl-substituted DS (6-Me-DS). Dependence of atomic force microscopy (AFM) patterns on the molar ratio allows the identification of dye domains. J-band optical peak analysis based on the Kuhn's extended dipole model, supplemented by a novel application of femtosecond pump-probe optical spectroscopy, yields the size of the J-aggregates of 10(3). The second topic is the control of the J-band peak wavelengths by mixing two different kinds of dye molecules. The first case is the mixture of a J-forming 6-Me-DS and non-J-forming merocyanine analog, DO with benzo-oxazole instead of benzothiazole of DS. The second case is the mixture of both J-forming dyes but with different J-band peak positions, 6-Me-DS and another analog of 5-Cl-DS. The optical peak shifts depending on the molar mixing ratio will be presented. The last topic is related to the elucidation of electronic states of dye molecules in the J-aggregates. Light-induced ESR (LESR) of DS films with stable isotope ((15)N or (13)C)-substituted dyes provide clear evidence for the photoinduced charge transfer by the detection of hyperfine structures. Moreover, infrared (IR) spectroscopy of (13)C-enriched dye identifies the IR absorption peak of the relevant carbon in the chromophore. The results give evidence for the enhanced intramolecular charge transfer of dyes in the J-aggregates compared with an isolated merocyanine composed of donor and acceptor moiety. Lastly, the Cl attachment in 5-Cl-DS leads to a significant enhancement of the nitrogen hyperfine coupling in the LESR spectra. These examples and others demonstrate the potential of LB films of merocyanines in the studies of the nanosized molecular aggregates in monolayer assemblies.