Effect of cylindrical filler aggregation on the electrical conductivity of composites

This work reports on the effect of carbon nanotube aggregation on the electrical conductivity and other network properties of polymer/carbon nanotube composites by modeling the carbon nanotubes as hard-core cylinders. It is shown that the conductivity decreases for increasing filler aggregation, and that this effect is more significant for higher cylinder volume fractions. It is also demonstrated, for volume fractions at which the giant component is present, that increasing the fraction of cylinders within clusters leads to a break of the giant component and the formation of a set of finite clusters. The decrease of the giant component with the increase of the fraction of cylinders within the cluster can be related to a decrease of the spanning probability due to a decrease of the number of cylinders between the clusters. Finally, it is demonstrated that the effect of aggregation can be understood by employing the network theory.     

Multiwall-carbon nanotube/cobalt ferrite hybrid: Synthesis,magnetic and conductivity characterization

Functionalized multiwall carbon nanotubes (MWCNT-COOH) were decorated with crystalline cobalt ferrite nanoparticles (CoFe₂O₄ NPs) by co-precipitation reaction to form MWCNT-COOH/CoFe₂O₄ hybrid. The hybrid was characterized by X-ray diffraction analysis, transmission electron microscopy (TEM), Fourier transfom infrared spectroscopy and vibrating sample magnetometry. The results confirmed that MWCNTs and CoFe₂O₄ NPs coexisted in the hybrid. The TEM results showed a thick layer of CoFe₂O₄ was intimately connected to the surface of MWCNTs. The saturation magnetization value of the hybrid was 11.5 emu/g. There has been a high frequency fluctuation in conductivity, however, above all dc conductivity changes and resulting activation energy is calculated from the Arrhenius plots. It is found to vary with the temperature regions. This can be attributed to the existence of a conventional temperature independent tunneling conduction mechanism, which can be also explained that the metallic conduction is a dominant mechanism around room temperature. The ac conductivity of MWCNT-COOH/CoFe₂O₄ hybrid might also be a consequence of the predictions of the universal dynamic response and the ‘n’ power exponents could be determined with lower concentration of the addition in the hybrids.     

Improved electrical,magnetic and dielectric properties of polypyrol (PPy) substituted spinel ferrite composites

CoTb_0.03Fe_1.97O₄ ferrite and poypyrrole (PPy) polymer nano composites were prepared by mixing the nano crystalline ferrite with poypyrrole (PPy) by following the solid state reaction synthesis route. The XRD patterns of CoTb_0.03Fe_1.97O₄ spinel ferrite powders and polymer (PPy) exhibited single phase spinel structure. The amorphous nature of PPy was evidenced by the broad peaks of XRD patterns. The surface morphology unfolded heterogeneous distribution in composites and ferrite. The grains in ferrite were spherical in shape with clear boundaries. The morphology was appreciably altered by the inclusion of ferrite contents. The higher activation energy and resistivity aroused due to blocking of conduction mechanism owing to nanoparticles embedded in the PPy matrix. A downfall in the dielectric loss of the composites is observed as the frequency of the applied field is increased. The incorporation of ferrite contents optimized the magnetic parameters of the composites. The enhanced coercivity (Hc) of these nanocomposites might be beneficial for memory devices.     

Micro Raman,Mossbauer and magnetic studies of manganese substituted zinc ferrite nanoparticles: Role of Mn

A series of Mn–Zn Ferrite nanoparticles (<15 nm) with formula Mn_xZn_1−xFe₂O₄ (where x=0.00, 0.35, 0.50, 0.65) were successfully prepared by citrate-gel method at low temperature (400 °C). X-ray diffraction analysis confirmed the formation of single cubic spinel phase in these nanoparticles. The FESEM and TEM micrographs revealed the nanoparticles to be nearly spherical in shape and of fairly uniform size. The fractions of Mn²⁺, Zn²⁺ and Fe³⁺ cations occupying tetrahedral sites along with Fe occupying octahedral sites within the unit cell of different ferrite samples are estimated by room temperature micro-Raman spectroscopy. Low temperature Mossbauer measurement on Mn_0.5Zn_0.5Fe₂O₄ has reconfirmed the mixed spinel phase of these nanoparticles. Room temperature magnetization studies (PPMS) of Mn substituted samples showed superparamagnetic behavior. Manganese substitution for Zn in the ferrite caused the magnetization to increase from 04 to18 emu/g and Lande's g factor (estimated from ferromagnetic resonance measurement) from 2.02 to 2.12 when x was increased up to 0.50. The FMR has shown that higher Mn cationic substitution leads to increase in dipolar interaction and decrease in super exchange interaction. Thermomagnetic (M–T) and magnetization (M–H) measurements have shown that the increase in Mn concentration (up to x=0.50) enhances the spin ordering temperature up to 150 K (blocking temperature). Magnetocrystalline anisotropy in the nanoparticles was established by Mossbauer, ferromagnetic resonance and thermomagnetic measurements. The optimized substitution of manganese for zinc improves the magnetic properties and makes these nanoparticles a potential candidate for their applications in microwave region and biomedical field.     

Investigations on the effect of complexation of NaF salt with polymer blend (PEO/PVP) electrolytes on ionic conductivity and optical energy band gaps

Sodium ion conducting polymer blend electrolyte films, based on polyethylene oxide (PEO) and polyvinyl pyrrolidone (PVP) complexed with NaF salt, were prepared using solution casting technique. The complexation of the salt with the polymer blend was confirmed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and UV-vis spectroscopy. Electrical conductivity of the films was measured with impedance analyzer in the frequency range of 1 Hz to 1 MHz and in the temperature range of 303-348 K. It was observed that the magnitude of conductivity increased with the increase in the salt concentration as well as the temperature. UV-vis absorption spectra in wavelength region of 200-800 nm were used to evaluate the optical properties like direct and indirect optical energy band gaps, optical absorption edge. The optical band gaps decreased with the increase in Na⁺ ion concentration. This suggests that NaF, as a dopant, is a good choice to improve the electrical properties of PEO/PVP polymer blend electrolytes.     

Hopping conductivity of Ni-doped p-CdSb in strong magnetic fields

Magnetoresistance (MR) of oriented single crystals of the anisotropic semiconductor p-CdSb doped with 2 at% of Ni is investigated between T=1.5 and 300 K in transversal pulsed magnetic fields up to B=30 T. In fields B∼4-15 T at T below 4.2 K, the resistivity obeys the law ln ρ∼η[B?(B)]^1/2 with ?(B)=a(0)/a(B), where a is the carrier localization radius and parameter η depends on a(0), on the acceptor concentration N_A and on the direction of the magnetic field with respect to the crystallographic axes, but does not depend on T. Such behavior gives evidence for MR realized by hopping charge transfer over the nearest-neighbor sites in strong magnetic field. The analysis of the experimental data yields the values of η, agreeing with calculated ones within an error of 10%, taking into account the effects of the anisotropy of the acceptor states and of the explicit dependence of a(B) due to the increase in the activation energy of shallow acceptors in magnetic field and the sensitivity of the metal-insulator transition to B.     

Influence of neutron irradiation and temperature on the electric conductivity of SiO2 nanoparticles

At different frequency range it has been studied the influence of temperature and amount of falling neutrons on nano SiO₂ irradiated with neutrons. It has been revealed that it is generated additional electroactive radiation defects under the influence of rays omitted from activation products or direct neutron. Thus, the change of neutron flux at 6.7 × 10¹⁷ ∼ 2.7 × 10¹⁸ cm⁻² s⁻¹ range increases the electric conductivity of nano SiO₂ for approximately 30 times. It has been revealed two temperature ranges at temperature dependence of non-irradiated sample and three temperature ranges at a neutron irradiated-sample. It has been put forward the mechanism that explains the obtained results.     

Influence of Co amount on the efficiency of energy absorption of Fe-Co ferrite nanoparticles

We present the chemical synthesis, structural characterization and efficiency of AC field energy absorption of Fe-Co ferrite particles sized between 35 and 100 nm and containing different cobalt amounts up to 3 wt%. Dynamic magnetic measurements in an AC field with frequency of 430 Hz and amplitude of up to 1200 Oe were performed for both solid and liquid dispersions of obtained particles. The energy absorption per one field cycle in function of the field amplitude and Co content was always bigger in liquid systems, under the same conditions, than in solid systems. The obtained results are of significance for the technology of low-frequency ferromagnetic hyperthermia of tumors.     

Screening effect of Ti ions on the electrical conductivity and thermoelectric power of Mg ferrite

The samples Mg_1+xTi_xFe_2−2xO₄ were prepared in a single phase spinel structure as indicated from X-ray analysis. The preference of Mg²⁺ ions to the octahedral site decreases the ratio of the normal spinel in the investigated ferrite where the Mg²⁺ increases on the expense of the Fe³⁺ ions on the same site. The increase in the conductivity was found to be due to thermally activated mobility of charge carriers. The mobility data enhances the use of Verway model of conductivity which depends on the electron exchange between iron ions of different valences located on the same crystallographic sites. The existence of Ti⁴⁺ ions on the octahedral site screens the polarization and decreases the conductivity of the samples. Peculiar behavior was obtained for Ti content of 0.7 and 0.8 due to the presence of secondary phases.     

Cobalt ferrite nanoparticles: The control of the particle size and surface state and their effects on magnetic properties

In order to improve the efficacy of magnetic fluid hyperthermia (MFH) mediators, we synthesised cobalt ferrite nanoparticles with different sizes (between 5 and 7 nm) via successive polyol synthesis. The static and dynamic magnetic properties of the prepared particles, dispersed in a solid matrix, were investigated in order to evaluate the possibility of applying cobalt ferrite as magnetic susceptors in MFH. The effect on magnetic properties coming from the surface anchoring of the model molecule cetyl phosphate, was also investigated.     

Impact of sonochemical synthesis condition on the structural and physical properties of MnFe2O4 spinel ferrite nanoparticles

Herein, we report sonochemical synthesis of MnFe₂O₄ spinel ferrite nanoparticles using UZ SONOPULS HD 2070 Ultrasonic homogenizer (frequency: 20 kHz and power: 70 W). The sonication time and percentage amplitude of ultrasonic power input cause appreciable changes in the structural, cation distribution and physical properties of MnFe₂O₄ nanoparticles. The average crystallite size of synthesized MnFe₂O₄ nanoparticles was increased with increase of sonication time and percentage amplitude of ultrasonic power input. The occupational formula by X-ray photoelectron spectroscopy for prepared spinel ferrite nanoparticles was (Mn_0.29Fe_0.42)[Mn_0.71Fe_1.58]O₄ and (Mn_0.28Fe_0.54) [Mn_0.72Fe_1.46]O₄ at sonication time 20 min and 80 min, respectively. The value of the saturation magnetization was increased from 1.9 emu/g to 52.5 emu/g with increase of sonication time 20 min to 80 min at constant 50% amplitude of ultrasonic power input, whereas, it was increased from 30.2 emu/g to 59.4 emu/g with increase of the percentage amplitude of ultrasonic power input at constant sonication time 60 min. The highest value of dielectric constant (ε′) was 499 at 1 kHz for nanoparticles at sonication time 20 min, whereas, ac conductivity was 368 × 10⁻⁹ S/cm at 1 kHz for spinel ferrite nanoparticles at sonication time 20 min. The demonstrated controllable physical characteristics over sonication time and percentage amplitude of ultrasonic power input are a key step to design spinel ferrite material of desired properties for specific application. The investigation of microwave operating frequency suggest that these prepared spinel ferrite nanoparticles are potential candidate for fabrication of devices at high frequency applications.     

Effect of aluminum substitution on the structural and magnetic properties of cobalt ferrite synthesized by sol-gel auto combustion process

Aluminum substituted cobalt ferrite powders (CoFe_2−xAl_xO₄) with varying composition from 0.0 to 1.0 in the step of 0.2 have been obtained by sol-gel auto combustion technique using citric acid as a fuel. The metal nitrate to fuel ratio was maintained 1:4 throughout the synthesis of CoFe_2−xAl_xO₄. The thermal analysis of as prepared samples is done by TGA technique. The compositional stoichiometry of the prepared samples is confirmed by Energy dispersive X-ray analysis technique. Single phase cubic spinel structure and nano phase structure of the synthesized powders were confirmed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The crystallite size of 16-26 nm was obtained using Scherrer formula. SEM analysis shows the formation of uniform grain growth. The grain size obtained from SEM results is of the order of 30 nm. Maximum specific surface area was observed to be of the order of 52 m²/gm. The highest value of saturation magnetization and coercivity was observed for pure cobalt ferrite sample and it decreases as the aluminum content x increases. A strong co-relation between the saturation magnetization and aluminum content was observed. The decrease in magnetic properties is due to the substitution of aluminum ions in place of Fe³⁺.     

Electrical conductivity of the molten EuBr2–MBr binary mixtures (M = Li, Na, K, Rb, or Cs)

The electrical conductivity of all EuBr₂–alkali metal bromide liquid mixtures was measured as function of temperature over the whole composition range. The activation energy, E_A, was evaluated for all liquid mixtures. It was revealed that the classical Arrhenius dependence did not stand for any individual mixture. The obtained results were discussed in terms of complex formation in the melts.     

Influence of the electrical field applied during thermal cycling on the conductivity of LLDPE/CNT composites

The effect of the electrical field on the conductivity of linear low-density polyethylene/carbon nanotubes/ (LLDPE/CNT) composites during temperature cycling has been investigated. Under applied voltage a positive resistivity temperature coefficient was observed during heating already at low (2–3 wt%) CNT content, followed by a large negative temperature coefficient during cooling whose value depends on the applied voltage. The resistivity values after thermal cycling were markedly lower, while they slightly increased in the absence of an electrical field. The effects of thermal cycling on structural and physical properties of the composites have been evaluated by X-ray diffraction and differential scanning calorimetry.     

Investigate the ultrasound energy assisted adsorption mechanism of nickel(II) ions onto modified magnetic cobalt ferrite nanoparticles: Multivariate optimization

In present study, magnetic cobalt ferrite nanoparticles modified with (E)-N-(2-nitrobenzylidene)-2-(2-(2-nitrophenyl)imidazolidine-1-yl) ethaneamine (CoFe₂O₄-NPs-NBNPIEA) was synthesized and applied as novel adsorbent for ultrasound energy assisted adsorption of nickel(II) ions (Ni²⁺) from aqueous solution. The prepared adsorbent characterized by Fourier transforms infrared spectroscopy (FT-IR), transmission electron microscope (TEM), vibrating sample magnetometer (VSM) and X-ray diffraction (XRD). The dependency of adsorption percentage to variables such as pH, initial Ni²⁺ ions concentration, adsorbent mass and ultrasound time were studied with response surface methodology (RSM) by considering the desirable functions. The quadratic model between the dependent and independent variables was built. The proposed method showed good agreement between the experimental data and predictive value, and it has been successfully employed to adsorption of Ni²⁺ ions from aqueous solution. Subsequently, the experimental equilibrium data at different concentration of Ni²⁺ ions and 10 mg amount of adsorbent mass was fitted to conventional isotherm models like Langmuir, Freundlich, Tempkin, Dubinin-Radushkevich and it was revealed that the Langmuir is best model for explanation of behavior of experimental data. In addition, conventional kinetic models such as pseudo-first and second-order, Elovich and intraparticle diffusion were applied and it was seen that pseudo-second-order equation is suitable to fit the experimental data.     

Irradiation effect on the activation energy of thermal decomposition of polymers

The present work looks into the aspect of thermal modifications induced in polymers by proton irradiation. The kinetics of thermal decomposition of polymers is investigated by using the thermogravimetric (TG) technique. It has been observed that the degradation of polymers is a multi-step process that involves sequential and competing processes, and obeys the Arrhenius kinetics which allows us to connect the rate constant with the absolute temperature and the activation energy. The activation energy of thermal decomposition has been calculated from the TG curves, and its variation with different irradiation doses has been derived.     

Influence of particle size and compaction pressure on the magnetic properties of iron-phenolic soft magnetic composites

This paper investigates the effect of particle size and compaction pressure on the magnetic properties of iron-phenolic soft magnetic composites (50 Hz-1000 kHz). The results showed that the optimum amount of phenolic resin to attain maximum permeability and minimum loss factor at 10 kHz is 0.7 wt% for samples containing iron powder with average particle size ∼150 μm compacted at 800 MPa. In accordance with this resin content, at high frequencies (>300 kHz), the sample with lower particle size ∼10 μm exhibits higher magnetic permeability, higher operating frequencies and lower imaginary part of permeability. With increase in the compaction pressure, specific resistivity decreases and imaginary and real parts of permeability increase at low frequencies.     

Combined effect of demagnetizing field and induced magnetic anisotropy on the magnetic properties of manganese-zinc ferrite composites

This work is devoted to the analysis of factors responsible for the high-frequency shift of the complex permeability (μ^?) dispersion region in polymer composites of manganese-zinc (MnZn) ferrite, as well as to the increase in their thermomagnetic stability. The magnetic spectra of the ferrite and its composites with polyurethane (MnZn-PU) and polyaniline (MnZn-PANI) are measured in the frequency range from 1 MHz to 3 GHz in a longitudinal magnetization field of up to 700 Ое and in the temperature interval from −20 °С to +150 °С. The approximation of the magnetic spectra by a model, which takes into account the role of domain wall motion and magnetization rotation, allows one to determine the specific contribution of resonance processes associated with domain wall motion and the natural ferromagnetic resonance to the μ^?. It is established that, at high frequencies, the μ^? of the MnZn ferrite is determined solely by magnetization rotation, which occurs in the region of natural ferromagnetic resonance when the ferrite is in the “single domain” state. In the polymer composites of the MnZn ferrite, the high-frequency permeability is also determined mainly by the magnetization rotation; however, up to high values of magnetizing fields, there is a contribution of domain wall motion, thus the “single domain” state in ferrite is not reached. The frequency and temperature dependence of μ^? in polymer composites are governed by demagnetizing field and the induced magnetic anisotropy. The contribution of the induced magnetic anisotropy is crucial for MnZn-PANI. It is attributed to the elastic stresses that arise due to the domain wall pinning by a polyaniline film adsorbed on the surface of the ferrite during in-situ polymerization.     

AC conductivity behaviour and charge carrier concentrations of some vanadate glassy system

The investigation of wide range of temperature and frequency dependent conductivity of some semiconducting glassy system reveals DC conductivity, crossover frequency and frequency exponent. The composition dependence of AC conduction activation energy and the permissible energy of polaron migration have also been computed. The Nernst-Einstein relation proves that the concentration of mobile charge carriers does not undertake a substantial part in electrical conduction.     

On the effect of flat energy directors thickness on heat generation during ultrasonic welding of thermoplastic composites

This paper presents a detailed experimental assessment of the effect of the thickness of flat energy directors (ED) on heat generation at the interface during ultrasonic welding. Power and displacement data showed clear differences caused by the change of thickness, related to heat concentration at the weld line during the process. The extent of the heat-affected zone was assessed by welding specimens without consolidation at different stages of the process. It was confirmed through optical microscopy that heat is generated at the interface and transferred to the bulk adherends earlier in the process for thinner ED. The analysis of their fracture surface under optimum welding conditions revealed signs of matrix degradation, leading to less consistent quality, likely due to faster heat generation rate in both the ED and the substrates, and incidentally, higher temperatures surrounding the energy director.