An Overview of Mechanical Strength of Optical Fiber Fusion Splices: Examples of Fractographic Analysis of Break Causes

Abstract

The theory and phenomena of mechanical strength of fusion splices are reviewed. An emphasis is placed on fractographic analysis of break causes. A variety of useful examples of splice breaks resulting from surface mechanical damage, various types of contamination, re-deposition of silica particles/thermal shock, and devitrification are shown. Special strength reduction issues related to emerging new splice types and splicing techniques, such as arc fusion splicing of heat sensitive fibers, prolonged pre- and post-heat treatment (for reducing splice losses of dissimilar fiber splices), and fire polishing, are discussed.     

An Overview of Mechanical Strength of Optical Fiber Fusion Splices: Examples of Fractographic Analysis of Break Causes

The theory and phenomena of mechanical strength of fusion splices are reviewed. An emphasis is placed on fractographic analysis of break causes. A variety of useful examples of splice breaks resulting from surface mechanical damage, various types of contamination, re-deposition of silica particles/thermal shock, and devitrification are shown. Special strength reduction issues related to emerging new splice types and splicing techniques, such as arc fusion splicing of heat sensitive fibers, prolonged pre- and post-heat treatment (for reducing splice losses of dissimilar fiber splices), and fire polishing, are discussed.     

Evaluation of splice loss in single-mode graded index fibres by a simple technique

We present simple and accurate analytical expressions for the evaluation of splice loss in single-mode graded index fibres. Our analysis is based on simple series expression for fundamental mode of such fibres which we have developed recently. Since splices are highly tolerant for longitudinal separation, we restrict our analysis to cases of transverse offset and angular tilt only. The concerned calculations require much less computations. With examples of step and parabolic index fibres, we show that our predictions agree excellently with the exact results. A useful collection of integration and differentiation formulae involving Bessel functions is presented in the appendix for ready reference to engineering problems of similar computational context.     

光子晶体光纤接续损耗的理论分析

基于超格子构造法,采用全矢量模型计算了光子晶体光纤的模场半径,由此出发理论分析了光子晶体光纤与普通单模光纤之间接续损耗分别受横向偏移、轴向倾斜以及模场不匹配的影响,给出了光子晶体光纤在部分常用结构参量区域{Λ,d/Λ}内与SMF-28接续损耗的理论值,讨论了光子晶体光纤各结构参量与接续损耗之间的关系。并简要分析了不同结构光子晶体光纤之间的接续损耗。结果表明,接续损耗对横向偏移和轴向倾斜都非常敏感;孔距是决定接续损耗大小最主要的因素;与普通单模光纤接续,当光子晶体光纤的孔距比该单模光纤纤芯半径大一些时,接续损耗比较小;两种不同结构光子晶体光纤之间的接续损耗大小最主要取决于它们孔距的差异。     

A simple but accurate method for prediction of splice loss in single-mode dispersion shifted trapezoidal as well as dispersion flattened graded and step W fibers

We present simple and accurate analytical expressions for transmission coefficient at the splice for both angular offset and transverse offset in case of single-mode dispersion shifted trapezoidal as well as dispersion flattened graded and step W fibers. Here, we employ the recently developed simple series expression for fundamental modal field for such fibers. The evaluation of the concerned parameters based on our formalism requires very little computations. We show that our estimations match excellently with the exact numerical results in case of the said fibers. Further, splices being highly tolerant with respect to longitudinal separation, we restrict our investigations to the cases of transverse and angular mismatches only. The present study should find application in all optical technology involving said kinds of fiber.     

A simple technique for evaluation of transmission coefficient at the splice with angular offset and transverse offset for first higher mode propagation in graded index fibers

We present simple and accurate analytical expressions for transmission coefficient at the splice with angular offset and transverse offset in case of first higher mode propagation in graded index fibers. We employ the simple series expression for first higher order modal field for graded index fiber. The evaluation of the concerned parameters based on our formalism requires very little computations. Here, we show that our estimations match excellently well with the exact results in case of step and parabolic index fibers. Further, splice being highly tolerant for longitudinal separation, our analysis is judiciously restricted to the case of transverse and angular mismatches only. The analysis should find application in dual mode graded index fiber in all optical technology.     

甚短距离光传输(VSR_1)系统色散功率代价的分析

导出了一种用系统10%—90%上升时间所表示的最坏情况下多模光纤色散功率代价的计算方法。将最坏情况下的眼图闭合用光接收器在t0时刻的输出信号波形表示,从而得到了色散功率代价的数学表达式。为了得到光接收器输出信号波形的解析解,假设多模光纤链路是一个低通滤波器,其归一化脉冲响应是高斯形式的。用这种方法对甚短距离光传输系统VSR_1的色散功率代价做了计算分析,所得结果可作为最坏情况下VSR_1链路功率预算分析的参考。     

Influence of fusion splice on high power ytterbium-doped fiber laser with master oscillator multi-stage power amplifiers structure

We have developed models to investigate the power properties of monolithic fiber laser with master oscillator multi-stage power amplifiers configuration. In the simulation the effect of optical characteristics of fiber fusion splice was considered, which was introduced by connecting fiber amplifiers. The theoretical modeling was established based on the classic theory of rate equations and the computational method was described in detail. On the basis of three high-power fiber lasers with different structures, we analyzed the splice loss and return loss, and how they influence the distribution of laser power in the system. The results showed that, on the present splicing level, both the enhancement of the pump capacity of fiber laser and the reduction of the quantity of power amplifier modules were effective strategies to accomplish fiber laser with tens of thousands of watts output.     

An analytical model for studying two-mode fibers: Splice loss prediction

In this paper we present a simple analytical model for the modal fields of an arbitrary graded index core two mode fiber and use it to study loss and mode conversion at a splice. The model is simple enough to obtain the modal field distributions and predict splice loss across jointed two-mode fiber links within a few percent accuracy on a pocket programable calculator.     

Diode-lasers based apparatus and method for single-mode fibers spectral splice loss measurements

Arc-discharge fusion splicing is widely used in the telecommunication industry for joining single-mode optical fibers to Er-doped fiber coils. These coils are used as the gain medium in erbium-doped amplifiers (EDFAs). The quality and integrity of splicing these coils to fibers can impact key EDFA performance parameters. This article describes an automated splice loss and Er-doped fiber absorption measurement system. The measurement system is equipped with 1310, 1550 and 1563 nm DFB lasers, broadband light source, InGaAs detectors and fiber-optic internal standards. Furthermore, the article describes a method for measuring splice loss between Er-doped fiber and the fibers spliced to coil ends. The system controls splice loss between SM-28 or HI980 fiber and Er-doped fiber to 0.094 ± 0.052 dB at 1550 nm. Moreover, the system can measure accurately Er-doped fiber absorption to within ±3.19% at 1563 nm.     

An analytic map for space charge in a nonlinear lattice

We propose a simple analytical model for an intense beam in a lattice with localized nonlinearities. In the thin lens limit a single nonlinearity leads to a Hénon like map. When the space charge is present and the core radius is small with respect to the dynamic aperture, the use of a frozen core distribution like KV is justified. In this case we define an analytic map M by composing the phase advance due to space charge, computed at the first perturbation order, with the kick due to the nonlinear force. The corresponding dynamics is almost indistinguishable from the dynamics of the “exact” map, which requires an accurate symplectic integration, if the tune depression is weak enough. The same accuracy is preserved for parametric modulations of the perveance or the beam core radius. The extension to any other distribution is straightforward.     

基于Michelson干涉仪的高灵敏度光纤高温探针传感器

提出了一种简单的高灵敏度的光纤高温探针传感器, 该传感器由一小段多模光纤和一端镀有银膜的单模光纤熔接而成. 由于单模光纤和多模光纤的纤芯直径不同, 当光波从多模光纤传输至多模光纤和单模光纤的熔接端面时, 一部分纤芯光耦合进包层, 因为单模光纤纤芯的折射率和包层的折射率不同, 不同模式的光经过银膜反射后在多模光纤内重新耦合进单模光纤, 最终形成干涉.随着外界温度的升高, 干涉谱峰值会向长波方向漂移. 实验结果证明这种传感器在470 ℃–600 ℃范围内具有很好的稳定性, 线性度达99.7%, 灵敏度为120 pm/℃, 可作为远距离反射型探针温度传感器, 在石油探测和油气田开发等领域有着广泛的应用前景. 关键词： 光纤传感 温度测量 Michelson干涉     

Static and Dynamic Analyses of Spliced Column

The analysis of spliced column has been carried out to detect optimum location of providing splices in the column. In the present work, static and dynamic (free vibration) analyses of spliced column have been done by randomising the location of splicing. A symmetrical four storey steel framed building has been modelled, analysed and designed for loads (dead, live and earthquake loads) recommended by Indian Codal provisions using Staad.Pro. The critical column at each floor level is identified based on axial force (AF), bending moment (BM) and shear force (SF). The total 16 models of spliced columns have been designed and then modelled in a 3D CAD Design tool (SOLIDWORKS) and then imported in the finite element tool (ANSYS Workbench 14.0) for detailed analysis. The variation of stress, strain and deflection of the spliced column are shown in the form of contour. Further, the modal analysis is performed to determine the natural frequencies. The results of static and dynamic analyses are compared for each modelled spliced column to obtain the optimum location for providing splices in the column. The dynamic analysis of spliced column is of utmost importance in the region where dynamic loadings like earthquake, cyclones etc. are more frequent, and mere static analysis does not account for the safety of the structure. This study will help the engineers to select directly the optimum size and location of the splices in the column of a steel framed building.     

Characteristics of penalty mode scattering by rigid splices in lined ducts

In lined ducts, incident modes are scattered by axially and circumferentially nonuniform impedance. Experiments and numerical calculations have proved that this mode scattering can reduce the liner performance in some cases. This paper is devoted to the characterization of the penalty mode scattering excited by hard-walled splices which often exist in lined ducts. It is shown that, in the range of small splice angles, the transmission loss may decrease sharply with increasing splice angle when one mode, which is near cut-off or has high azimuthal order, is incident. When the incident sound field is composed of several acoustical modes, the phase interferences of incident modes are important for the penalty mode scattering. The effects of other parameters, e.g., liner length, mode quasiresonance on the penalty mode scattering are also presented.     

Determination of the “optical” thickness and of the filling factor of discontinuous Au films from photometric and ellipsometric measurements

The “optical” thickness of discontinuous Au films is determined from a suitable combination of photometric and ellipsometric measurements. The value of the metal filling factor which can be deduced from a comparison with the “mass” thickness is found to be in good agreement with the value directly obtained from structure studies.     

Core level binding energy shifts of K and Cs adlayers on Ru(001)

Using synchrotron radiation from the VUV ring at NSLS and vacuum ultraviolet radiation from a HeI resonance lamp, we have recorded high resolution photoemission spectra of K and Cs overlayers on Ru(001). It is found that for “thin” multilayer coverages ( 3 ML) the K3p and Cs5p core levels exhibit three sets of core levels which can be assigned to interface, “bulkrd and surface emission in increasing binding energy. The results are discussed in terms of the nature of electronic interaction and a thermodynamic model. The K3p core level spin-orbit splitting is also resolved in these measurements for K in the condensed phase, for the first time with photoemission spectroscopy.     

Alternative procedure for LR 115 chemical etching and alpha tracks counting

An improved procedure for etching and analysis of alpha tracks induced in LR-115 detectors is proposed with the advantages of simplicity and its relatively low cost. A new type of detector holder was designed to etch and rinse efficiently up to 100 detectors. We develop a simple and reliable methodology with a semiautomatic track count using a Nikon digital camera coupled to a PC and employing software “SCION” freely available on the Internet. Track images are binarized prior the application of software “SCION” so that original track shapes are not distorted, space resolution is improved and track counting has low dependence on focus and illumination level. High discrimination for tracks is achieved when marks and rips perturb the detector surface. An image generator of nuclear tracks is included to study the effect of track overlapping effect on counting.     

Selection of mandrel wrap mode filters for optical fiber loss measurements

A selection criterion for mode filters based on far-field patterns is developed. The criterion is used to select a mandrel wrap filter for 50 μm core diameter, 125 μm outside diameter fibers with δ=1.1%. When cut-back loss measurements were made using the mandrel wrap chosen in this way, loss scaled with length to within ± 0.05 dB/km in three 2-km fibers.     

Outer curvature and conformal geometry of an imbedding

The differential geometry of an imbedded (e.g. string or membrane world sheet) surface in a higher-dimensional background is shown to be conveniently describable (except in the null limit case) in terms of what are designated as its first, second, and third fundamental tensors, which will have the respective symmetry properties η_μν = η_(μν) as a trivial algebraic identity, K_μν^ρ = K_(μν)^ρ as the “generalised Weingarten identity”, which is the (Frobenius type) integrability condition for the imbedding, and Ξ_λμν^ρ = Ξ_(λμν)^ρ as a “generalised Codazzi equation”, which depends on the background geometry being flat or of constant curvature, needing replacement by a more complicated expression for a generic value of the background curvature B_κλ^μ_ν. The “generalised Gauss equation” expressing the dependence on this background curvature of the internal curvature tensor R_κλ^μ_ν of the imbedded surface is converted into terms of the first and second fundamental tensors, and it is thereby demonstrated that the vanishing of the (conformally invariant) “conformation tensor”, i.e. the trace free part C_μν^ρ of the second fundamental tensor K_μv^ρ, is a sufficient condition for conformal flatness of the imbedded surface (and thus in particular for the vanishing of its (Weyl type) conformal curvature tensor C_κλ^μ_ν) provided the background is itself conformally flat. In a trio of which the first two members are the generalised Gauss and Codazzi equations, the “third” member is shown to give an expression in terms of C_μν^ρ for the (trace free, conformally invariant) “outer curvature” tensor Ω_κλ^μ_ν whose vanishing is the condition for feasibility of the natural generalisation of the Walker frame transportation ansatz. The vanishing of C_μν^ρ is shown to be sufficient in a conformally flat background for the vanishing also of Ω_κλ^μ_ν.